ELECTRICAL AND STARTING SYSTEM
SOLENOID GPBOX GP
WIRING GP
ELECTRICAL AND STARTING SYSTEM
SOLENOID GP
#M00707620520
103-0692: VALVE GP-SOLENOID
103-0692 VALVE GP-SOLENOID -GAS SHUTOFF
S/N NWD1-UP
24-VOLT
PART OF 9Y-6992 VALVE GP-SOLENOID
AN ATTACHMENT
S/N NWD1-UP
24-VOLT
PART OF 9Y-6992 VALVE GP-SOLENOID
AN ATTACHMENT
For full view, you need register
Parts for your G3516C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7X-1678 | [1] | COIL AS |
#M00707620521
9Y-6992: VALVE GP-SOLENOID
For full view, you need register
#M00707620522
494-8210: WIRING GP-BOX
For full view, you need register
Parts for your G3516C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 128-8065 | [1] | CIRCUIT BREAKER AS (10-AMPERE) | |
| 3. | 314-9098 | [2] | BLOCK-TERMINAL (600-VOLT, 25-AMPERE) | |
| 4. | 314-9101 | [2] | BRACKET-END | |
| 5. | 325-1788 | [1] | COVER-TERMINAL | |
| 6. | 336-9184 | [1] | BASE-RELAY | |
| 7. | 336-9185 | [1] | RELAY (10-AMPERE)(JACKET WATER HEATER) | |
| 8. | 336-9186 | [1] | MODULE-DIODE | |
| 9. | 244-9656 | [1] | CIRCUIT BREAKER AS (60-AMPERE) | |
| 10. | 494-8211 | [1] | HARNESS AS-WIRING | |
| 3S-2093 B | [11] | STRAP-CABLE | ||
| 6V-9023 E | TUBE-HEAT SHRINK (12.7-MM DIA)(6-CM) | |||
| 119-1093 | [4] | END-WIRE (8-GA) | ||
| 109-3038 | [16] | END-WIRE (16-GA) | ||
| 11. | 494-8213 | [1] | FILM-IDENTIFICATION (AC) | |
| 12. | 494-8212 | [1] | MARKER-TERMINAL | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#M00707620523
145-5138: WIRING GP-ELECTRONIC CONTROL
145-5138 WIRING GP-ELECTRONIC CONTROL
S/N 2SN1-UP; 9CN1-UP
DIGITAL VOLTAGE REGULATOR POWER
AN ATTACHMENT
S/N 2SN1-UP; 9CN1-UP
DIGITAL VOLTAGE REGULATOR POWER
AN ATTACHMENT
For full view, you need register
Parts for your G3516C INDUSTRIAL ENGINE:
CATERPILLAR SIS#M00707620524
285-7199: WIRING GP-ELECTRONIC CONTROL
285-7199 WIRING GP-ELECTRONIC CONTROL -SECONDARY ECM
S/N NWD1-UP
AN ATTACHMENT
S/N NWD1-UP
AN ATTACHMENT
For full view, you need register
Parts for your G3516C INDUSTRIAL ENGINE:
CATERPILLAR SIS#M00707620525
166-8368: WIRING GP-ENGINE
166-8368 WIRING GP-ENGINE
S/N 2SN1-UP; 9CN1-UP
ENGINE SENSORS AND GOVERNOR CONTROLS
FOR USE WITH 820-FRAME
AN ATTACHMENT
S/N 2SN1-UP; 9CN1-UP
ENGINE SENSORS AND GOVERNOR CONTROLS
FOR USE WITH 820-FRAME
AN ATTACHMENT
For full view, you need register
Parts for your G3516C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 166-8369 | [1] | HARNESS AS-WIRING (ENGINE SENSORS) | ||
| 186-3736 | [34] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [20] | STRAP-CABLE | ||
| 5N-9067 | [1] | COLLAR | ||
| 5N-9072 | [1] | CLIP | ||
| 5N-9117 | [1] | ADAPTER | ||
| 6I-4348 | [1] | BOOT (40-PIN) | ||
| 8L-8413 | [9] | STRAP-CABLE (WHITE) | ||
| 8T-6342 B | TUBE-HEAT SHRINK (3.2-MM DIA)(39-CM) | |||
| 8T-9834 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3132 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 062-5388 | [1] | LOCKNUT (1-11-1/2-THD) | ||
| 109-3038 | [32] | END-WIRE (16-GA) | ||
| 134-6258 E | CABLE-ELECTRICAL (16-GA)(1332-CM) | |||
| 166-8370 | [1] | HARNESS AS-WIRING (GOVERNOR CONTROLS) | ||
| 5N-9067 | [1] | COLLAR | ||
| 5P-6009 EJ | TUBE-HEAT SHRINK (9.52-MM DIA)(10-CM) | |||
| 8L-8413 | [2] | STRAP-CABLE (WHITE) | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(13-CM) | |||
| 109-3038 | [11] | END-WIRE (16-GA) | ||
| 109-3039 | [8] | END-WIRE (12-GA) | ||
| 109-8220 | [1] | END-WIRE (10-GA) | ||
| 134-6258 E | CABLE-ELECTRICAL (16-GA)(425-CM) | |||
| 140-3062 | [1] | PLUG AS-CONNECTOR | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| J | ORDER BY THE DECIMETER | |||
| M | METRIC PART | |||
#M00707620526
220-7253: WIRING GP-ENGINE
For full view, you need register
Parts for your G3516C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0S-1621 | [1] | BOLT (1/2-13X1-IN) | |
| 2. | 220-7255 | [1] | HARNESS AS-POWER (ALTERNATOR AIR) | |
| 8T-8827 | [1] | BOOT (RED) | ||
| 2L-8050 | [1] | TERMINAL-RING (6-GA, 1/4-IN SCREW) | ||
| -OR- | ||||
| 2L-8058 | [1] | TERMINAL-RING (8-GA, 1/4-IN SCREW) | ||
| 3T-4692 | [3] | TERMINAL-RING (6-GA, 7/16-IN SCREW) | ||
| -OR- | ||||
| 3T-4693 | [3] | TERMINAL-RING (8-GA, 7/16-IN SCREW) | ||
| 3. | 4P-7428 | [1] | CLIP (LADDER) | |
| 4. | 4P-7429 | [1] | CLIP (LADDER) | |
| 5. | 4P-7581 | [4] | CLIP (LADDER) | |
| 6. | 4P-8134 | [3] | CLIP (LADDER) | |
| 7. | 5P-8245 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 8. | 9X-6772 | [9] | STRAP-CABLE | |
#M00707620527
418-6971: WIRING GP-ENGINE
For full view, you need register
Parts for your G3516C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6443 | [1] | CAP-CONNECTOR | |
| 2. | 7K-1181 | [47] | STRAP-CABLE | |
| 3. | 121-0816 | [2] | MOUNT-FLEXIBLE | |
| 4. | 146-1815 | [1] | STRAP AS | |
| 5. | 205-0370 | [2] | BRACKET | |
| 6. | 219-4742 | [1] | FILM-IDENTIFICATION (CIRCUIT BREAKER) | |
| 7. | 309-1767 | [1] | BRACKET AS | |
| 180-2658 | [4] | SPACER (12X22X85.8-MM THK) | ||
| 8. | 360-9144 Y | [1] | HARNESS AS-SENSOR (DETONATION) | |
| 9. | 418-6972 Y | [1] | WIRING GP-ENGINE | |
| 10. | 0S-0509 | [14] | BOLT (3/8-16X0.75-IN) | |
| 11. | 0S-1594 | [5] | BOLT (3/8-16X1-IN) | |
| 12. | 0S-1617 | [3] | BOLT (5/16-18X0.75-IN) | |
| 13. | 141-7220 | [4] | SCREW-PAN HEAD (8-32X0.63-IN) | |
| 14. | 1A-2029 | [1] | BOLT (3/8-16X1.125-IN) | |
| 15. | 1A-5183 | [4] | BOLT (3/8-16X4.75-IN) | |
| 16. | 1B-2713 | [4] | BOLT (1/4-20X1.75-IN) | |
| 17. | 1F-7958 | [1] | NUT-FULL (1/2-13-THD) | |
| 18. | 1H-3338 | [2] | LOCKWASHER | |
| 19. | 2A-0762 | [2] | BOLT (1/4-20X0.625-IN) | |
| 20. | 4B-4863 | [4] | WASHER (4.7X11X1.2-MM THK) | |
| 21. | 4P-7429 | [3] | CLIP (LADDER) | |
| 22. | 4P-7581 | [8] | CLIP (LADDER) | |
| 23. | 4P-8134 | [31] | CLIP (LADDER) | |
| 24. | 5M-2894 | [30] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 25. | 5P-0537 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 26. | 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 27. | 6D-5801 | [4] | LOCKNUT (8-32-THD) | |
| 28. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 29. | 9S-8752 | [6] | NUT-FULL (3/8-16-THD) | |
| 30. | 2B-0947 | [1] | BOLT (1/2-13X2.25-IN) | |
| 31. | 7K-1181 B | [7] | STRAP-CABLE | |
| 32. | 5S-0003 | [2] | NUT (5/16-18-THD) | |
| 33. | 3E-4352 | [4] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00707620528
418-6972: WIRING GP-ENGINE
418-6972 WIRING GP-ENGINE
S/N NWD1-UP
PART OF 418-6971, 575-2914 WIRING GP-ENGINE
AN ATTACHMENT
S/N NWD1-UP
PART OF 418-6971, 575-2914 WIRING GP-ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your G3516C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 121-0816 | [2] | MOUNT-FLEXIBLE | |
| 2. | 303-8245 Y | [1] | BOX GP-JUNCTION | |
| 3. | 309-1768 | [1] | BRACKET AS | |
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 4. | 418-6973 Y | [1] | HARNESS AS-ENGINE | |
| 5. | 0S-1590 | [4] | BOLT (3/8-16X2-IN) | |
| 6. | 141-7220 | [4] | SCREW-PAN HEAD (8-32X0.63-IN) | |
| 7. | 103-9425 | [4] | SCREW-MACHINE (8-32X1-IN) | |
| 8. | 4B-4863 | [12] | WASHER (4.7X11X1.2-MM THK) | |
| 9. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 10. | 5P-0537 | [7] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 11. | 6D-5801 | [8] | LOCKNUT (8-32-THD) | |
| 12. | 7B-8167 | [7] | BOLT (1/4-20X1.625-IN) | |
| 13. | 8L-8413 | [33] | STRAP-CABLE (WHITE) | |
| Y | SEPARATE ILLUSTRATION | |||
#M00707620529
418-6974: WIRING GP-ENGINE
418-6974 WIRING GP-ENGINE
S/N NWD1-UP
FOR USE WITH G3516C NON ISLAND MODE ENGINES
AN ATTACHMENT
S/N NWD1-UP
FOR USE WITH G3516C NON ISLAND MODE ENGINES
AN ATTACHMENT
For full view, you need register
Parts for your G3516C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6443 | [1] | CAP-CONNECTOR | |
| 2. | 7K-1181 | [38] | STRAP-CABLE | |
| 3. | 121-0816 | [2] | MOUNT-FLEXIBLE | |
| 4. | 146-1815 | [1] | STRAP AS | |
| 5. | 211-2003 Y | [1] | HARNESS AS-SENSOR | |
| 6. | 219-4742 | [1] | FILM-IDENTIFICATION (CIRCUIT BREAKER) | |
| 7. | 309-1767 | [1] | BRACKET AS | |
| 8E-3276 | [2] | SPACER (7.5X15X5-MM THK) | ||
| 180-2658 | [4] | SPACER (12X22X85.8-MM THK) | ||
| 8. | 418-6975 Y | [1] | HARNESS GP-WIRING | |
| 9. | 0S-0509 | [16] | BOLT (3/8-16X0.75-IN) | |
| 10. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 11. | 0S-1617 | [1] | BOLT (5/16-18X0.75-IN) | |
| 12. | 141-7220 | [4] | SCREW-PAN HEAD (8-32X0.63-IN) | |
| 13. | 1A-5183 | [4] | BOLT (3/8-16X4.75-IN) | |
| 14. | 1B-2713 | [4] | BOLT (1/4-20X1.75-IN) | |
| 15. | 1H-3338 | [2] | LOCKWASHER | |
| 16. | 2A-0762 | [2] | BOLT (1/4-20X0.625-IN) | |
| 17. | 4B-4863 | [4] | WASHER (4.7X11X1.2-MM THK) | |
| 18. | 4P-7429 | [3] | CLIP (LADDER) | |
| 19. | 4P-7581 | [3] | CLIP (LADDER) | |
| 20. | 4P-8134 | [27] | CLIP (LADDER) | |
| 21. | 5M-2894 | [24] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 22. | 5P-0537 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 23. | 6D-5801 | [4] | LOCKNUT (8-32-THD) | |
| 24. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 25. | 9S-8752 | [2] | NUT-FULL (3/8-16-THD) | |
| 26. | 7K-1181 B | [8] | STRAP-CABLE | |
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
