336F XE & 336F LXE Excavators NAJ00001-UP (MACHINE) POWERED BY C9.3 Engine ELECTRICAL AND STARTING SYSTEM Caterpillar SIS

EXCAVATOR 336F XE EXCAVATOR NAJ
336F XE & 336F LXE Excavators NAJ00001-UP (MACHINE) POWERED BY C9.3 Engine M0070810 336F XE NAJ (2016)

Parts group 336F XE:

For full view, you need register

ELECTRICAL AND STARTING SYSTEM

ALARM GP

360-6166 ALARM GP-TRAVEL

360-6166 ALARM GP-TRAVEL -BACKUP
S/N NAJ1-UP; PFL1-UP

ALTERNATOR GP-CHARGING

344-0368 MOUNTING GP-ALTERNATOR & COMPR

344-0368 MOUNTING GP-ALTERNATOR & COMPR
S/N SYE1-UP
PROVIDES ALTERNATOR AND AIR CONDITIONING COMPRESSOR MOUNTING GP LOCATED ON UPPER RIGHT HAND SIDE OF THE ENGINE, INCLUDES BELT TENSIONER AND IDLER PULLEYS.
PART OF 485-9800, 516-4820 ENGINE AR-COMPLETE
FOR USE WITH PAD MOUNTED ALTERNATORS AND COMPRESSORS
CANNOT BE USED WITH HINGE MOUNTED ALTERNATORS AND COMPRESSORS

385-1339 PULLEY GP-FAN

385-1339 PULLEY GP-FAN
S/N NAJ1-UP; PFL1-UP
PART OF 383-6402 FAN AR-VARIABLE

235-7133 ALTERNATOR GP-CHARGING

235-7133 ALTERNATOR GP-CHARGING
S/N SYE1-UP
24-VOLT, 80-AMPERE
PART OF 345-1176 ALTERNATOR GP-CHARGING

345-1176 ALTERNATOR GP-CHARGING

345-1176 ALTERNATOR GP-CHARGING
S/N SYE1-UP
PART OF 485-9800, 516-4820 ENGINE AR-COMPLETE

BATTERY GP

319-1193 BATTERY & WIRING GP

319-1193 BATTERY & WIRING GP -COLD WEATHER
S/N NAJ1-UP; PFL1-UP
WITHOUT JUMP START

444-3846 BATTERY & WIRING GP

444-3846 BATTERY & WIRING GP
S/N NAJ1-UP; PFL1-UP
PART OF 444-3845 ELECTRICAL AR

444-3845 ELECTRICAL AR

444-3845 ELECTRICAL AR
S/N NAJ1-UP; PFL1-UP
PART OF 444-4128, 444-4129 COMMON AR

CIRCUIT BREAKER GP

447-1669 CIRCUIT BREAKER GP

447-1669 CIRCUIT BREAKER GP
S/N NAJ1-UP; PFL1-UP
PART OF 444-3849 WIRING GP-CAB

CONTROL GP

342-3641 INSTALLATION AR

342-3641 INSTALLATION AR -FRONT WINDOW WIPER
S/N NAJ1-UP; PFL1-UP
FOR USE WITH 1-PIECE WINDOW

444-3848 CONTROL & MONITOR GP-CAB

444-3848 CONTROL & MONITOR GP-CAB
S/N NAJ1-UP; PFL1-UP
PART OF 444-3845 ELECTRICAL AR

CONTROL GP-ELECTRONIC

378-3184 CONTROL & MTG GP-ELECTRONIC

378-3184 CONTROL & MTG GP-ELECTRONIC -DIESEL EXHAUST FLUID
S/N NAJ1-UP; PFL1-UP
PART OF 370-5668 MODULE AR-DIESEL EXHAUST FLUID

378-9358 CONTROL & MTG GP-ELECTRONIC

378-9358 CONTROL & MTG GP-ELECTRONIC -MAIN CONTROL VALVE
S/N NAJ1-UP; PFL1-UP
PART OF 378-9360 VALVE AR-MAIN CONTROL

378-9368 CONTROL & MTG GP-ELECTRONIC

378-9368 CONTROL & MTG GP-ELECTRONIC -MAIN CONTROL VALVE
S/N NAJ1-UP; PFL1-UP
PART OF 378-9370 VALVE AR-MAIN CONTROL

499-6629 CONTROL & MTG GP-ELECTRONIC

499-6629 CONTROL & MTG GP-ELECTRONIC -DEF
S/N NAJ1-UP; PFL1-UP
PART OF 499-6634 MODULE AR-DIESEL EXHAUST FLUID

337-8360 CONTROL AR-COMMUNICATION

337-8360 CONTROL AR-COMMUNICATION -PRODUCT LINK 321SR
S/N NAJ1-UP; PFL1-UP
PART OF 466-2765 OPTION AR-REGIONAL

396-6500 CONTROL GP-ELECTRONIC

396-6500 CONTROL GP-ELECTRONIC
S/N NAJ1-UP; PFL1-UP
24-VOLT, VOLTAGE LIMITING PROTECTION MODULE
PART OF 389-2633 ELECTRICAL GP-DEF

346-8033 MOUNTING GP-CONTROL

346-8033 MOUNTING GP-CONTROL -WIPER, WASHER
S/N NAJ1-UP; PFL1-UP
PART OF 342-3641 INSTALLATION AR

368-8308 MOUNTING GP-ELECTRONIC CONTROL

368-8308 MOUNTING GP-ELECTRONIC CONTROL -CEM
S/N NAJ1-UP; PFL1-UP
PART OF 448-4563 INSTALLATION AR-CEM

ELECTRONICS GP-ENGINE

378-3184 CONTROL & MTG GP-ELECTRONIC

378-3184 CONTROL & MTG GP-ELECTRONIC -DIESEL EXHAUST FLUID
S/N NAJ1-UP; PFL1-UP
PART OF 370-5668 MODULE AR-DIESEL EXHAUST FLUID

378-9358 CONTROL & MTG GP-ELECTRONIC

378-9358 CONTROL & MTG GP-ELECTRONIC -MAIN CONTROL VALVE
S/N NAJ1-UP; PFL1-UP
PART OF 378-9360 VALVE AR-MAIN CONTROL

378-9368 CONTROL & MTG GP-ELECTRONIC

378-9368 CONTROL & MTG GP-ELECTRONIC -MAIN CONTROL VALVE
S/N NAJ1-UP; PFL1-UP
PART OF 378-9370 VALVE AR-MAIN CONTROL

499-6629 CONTROL & MTG GP-ELECTRONIC

499-6629 CONTROL & MTG GP-ELECTRONIC -DEF
S/N NAJ1-UP; PFL1-UP
PART OF 499-6634 MODULE AR-DIESEL EXHAUST FLUID

388-3539 CONTROL & MTG GP-ENGINE ELEK

388-3539 CONTROL & MTG GP-ENGINE ELEK
S/N SYE1-UP
PART OF 485-9800, 516-4820 ENGINE AR-COMPLETE
FOR USE WITH REMOTE MOUNTED A5E2 ECM
CANNOT BE USED WITH ENGINE MOUNTED A5E2 ECM

394-8802 CONTROL & MTG GP-ENGINE ELEK

394-8802 CONTROL & MTG GP-ENGINE ELEK
S/N SYE1-UP
PART OF 485-9800, 516-4820 ENGINE AR-COMPLETE

ELECTRONICS GP-POWER TRAIN

378-3184 CONTROL & MTG GP-ELECTRONIC

378-3184 CONTROL & MTG GP-ELECTRONIC -DIESEL EXHAUST FLUID
S/N NAJ1-UP; PFL1-UP
PART OF 370-5668 MODULE AR-DIESEL EXHAUST FLUID

378-9358 CONTROL & MTG GP-ELECTRONIC

378-9358 CONTROL & MTG GP-ELECTRONIC -MAIN CONTROL VALVE
S/N NAJ1-UP; PFL1-UP
PART OF 378-9360 VALVE AR-MAIN CONTROL

378-9368 CONTROL & MTG GP-ELECTRONIC

378-9368 CONTROL & MTG GP-ELECTRONIC -MAIN CONTROL VALVE
S/N NAJ1-UP; PFL1-UP
PART OF 378-9370 VALVE AR-MAIN CONTROL

499-6629 CONTROL & MTG GP-ELECTRONIC

499-6629 CONTROL & MTG GP-ELECTRONIC -DEF
S/N NAJ1-UP; PFL1-UP
PART OF 499-6634 MODULE AR-DIESEL EXHAUST FLUID

CONTROL GP-GRADE

444-4117 GRADE CONTROL AR

444-4117 GRADE CONTROL AR
S/N NAJ1-UP; PFL1-UP
PART OF 506-8971, 506-8972, 506-8973, 506-8974 DISTRIBUTION AR

513-2945 KIT-GRADE CONTROL

513-2945 KIT-GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
ELECTRICAL HYDRAULIC OVERLAY KIT

338-6843 MOUNTING GP-GRADE CONTROL

338-6843 MOUNTING GP-GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 444-4117 GRADE CONTROL AR

521-4909 MOUNTING GP-RECEIVER

521-4909 MOUNTING GP-RECEIVER
S/N NAJ1-UP; PFL1-UP
PART OF 519-1688 INSTALLATION AR-COMMUNICATION

539-9513 MOUNTING GP-RECEIVER

539-9513 MOUNTING GP-RECEIVER
S/N NAJ1-UP; PFL1-UP
PART OF 519-1688 INSTALLATION AR-COMMUNICATION

349-2167 RECEIVER GP-LASER

349-2167 RECEIVER GP-LASER -GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 444-4150, 444-4153, 467-8376, 470-6042, 488-0473, 488-0477, 488-0481, 502-9422, 502-9423, 502-9428 STICK AR-HOE

ELECTRONICS GP-IMPLEMENT

378-3184 CONTROL & MTG GP-ELECTRONIC

378-3184 CONTROL & MTG GP-ELECTRONIC -DIESEL EXHAUST FLUID
S/N NAJ1-UP; PFL1-UP
PART OF 370-5668 MODULE AR-DIESEL EXHAUST FLUID

378-9358 CONTROL & MTG GP-ELECTRONIC

378-9358 CONTROL & MTG GP-ELECTRONIC -MAIN CONTROL VALVE
S/N NAJ1-UP; PFL1-UP
PART OF 378-9360 VALVE AR-MAIN CONTROL

378-9368 CONTROL & MTG GP-ELECTRONIC

378-9368 CONTROL & MTG GP-ELECTRONIC -MAIN CONTROL VALVE
S/N NAJ1-UP; PFL1-UP
PART OF 378-9370 VALVE AR-MAIN CONTROL

499-6629 CONTROL & MTG GP-ELECTRONIC

499-6629 CONTROL & MTG GP-ELECTRONIC -DEF
S/N NAJ1-UP; PFL1-UP
PART OF 499-6634 MODULE AR-DIESEL EXHAUST FLUID

449-8914 ELECTRONICS GP-IMPLEMENT

449-8914 ELECTRONICS GP-IMPLEMENT
S/N NAJ1-UP; PFL1-UP
PART OF 378-9360, 378-9370 VALVE AR-MAIN CONTROL

ELECTRONICS GP-MACHINE

378-3184 CONTROL & MTG GP-ELECTRONIC

378-3184 CONTROL & MTG GP-ELECTRONIC -DIESEL EXHAUST FLUID
S/N NAJ1-UP; PFL1-UP
PART OF 370-5668 MODULE AR-DIESEL EXHAUST FLUID

378-9358 CONTROL & MTG GP-ELECTRONIC

378-9358 CONTROL & MTG GP-ELECTRONIC -MAIN CONTROL VALVE
S/N NAJ1-UP; PFL1-UP
PART OF 378-9360 VALVE AR-MAIN CONTROL

378-9368 CONTROL & MTG GP-ELECTRONIC

378-9368 CONTROL & MTG GP-ELECTRONIC -MAIN CONTROL VALVE
S/N NAJ1-UP; PFL1-UP
PART OF 378-9370 VALVE AR-MAIN CONTROL

499-6629 CONTROL & MTG GP-ELECTRONIC

499-6629 CONTROL & MTG GP-ELECTRONIC -DEF
S/N NAJ1-UP; PFL1-UP
PART OF 499-6634 MODULE AR-DIESEL EXHAUST FLUID

309-5875 CONTROL & MTG GP-MACHINE

309-5875 CONTROL & MTG GP-MACHINE
S/N NAJ1-UP; PFL1-UP
PART OF 444-3848 CONTROL & MONITOR GP-CAB

444-3200 ELECTRONICS GP-MACHINE

444-3200 ELECTRONICS GP-MACHINE
S/N NAJ1-UP; PFL1-UP
PART OF 444-3845 ELECTRICAL AR

469-7087 ELECTRONICS GP-MACHINE

469-7087 ELECTRONICS GP-MACHINE
S/N NAJ1-UP; PFL1-UP
PART OF 444-4117 GRADE CONTROL AR

486-0923 ELECTRONICS GP-MACHINE

486-0923 ELECTRONICS GP-MACHINE -MACHINE SECURITY SYSTEM
S/N NAJ1-UP; PFL1-UP
PART OF 309-5880 INSTALLATION GP-SECURITY

521-6795 ELECTRONICS GP-MACHINE

521-6795 ELECTRONICS GP-MACHINE
S/N NAJ1-UP; PFL1-UP
PART OF 519-1688 INSTALLATION AR-COMMUNICATION

309-5880 INSTALLATION GP-SECURITY

309-5880 INSTALLATION GP-SECURITY
S/N NAJ1-UP; PFL1-UP
PART OF 337-8363, 366-8683 INSTALLATION GP-SECURITY

337-8363 INSTALLATION GP-SECURITY

337-8363 INSTALLATION GP-SECURITY
S/N NAJ1-UP; PFL1-UP
PART OF 506-8971, 506-8972, 506-8973, 506-8974 DISTRIBUTION AR
CANNOT BE USED WITH @@@@@324-5778@@@@@

366-8683 INSTALLATION GP-SECURITY

366-8683 INSTALLATION GP-SECURITY
S/N NAJ1-UP; PFL1-UP
CANNOT BE USED WITH @@@@@324-5778@@@@@, @@@@@337-8363@@@@@

CONTROL GP-UNPROGRAMMED

317-3869 CONTROL GP-UNPROGRAMMED

317-3869 CONTROL GP-UNPROGRAMMED
S/N NAJ1-UP; PFL1-UP
PART OF 378-9358, 378-9368 CONTROL & MTG GP-ELECTRONIC

398-8975 CONTROL GP-UNPROGRAMMED

398-8975 CONTROL GP-UNPROGRAMMED -GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 444-4117 GRADE CONTROL AR

440-2105 CONTROL GP-UNPROGRAMMED

440-2105 CONTROL GP-UNPROGRAMMED -PL641E CELLULAR
S/N NAJ1-UP; PFL1-UP
PART OF 459-3701, 504-1199 CONTROL & MTG GP-COMMUNICATION

ELECTRICAL GP

444-3845 ELECTRICAL AR

444-3845 ELECTRICAL AR
S/N NAJ1-UP; PFL1-UP
PART OF 444-4128, 444-4129 COMMON AR

IGNITION GP

343-3872 COIL GP-IGNITION

343-3872 COIL GP-IGNITION -AFTERTREATMENT REGEN DEVICE
S/N NAJ1-UP; PFL1-UP
PART OF 469-6266 MODULE AR-CLEAN EMISSIONS

LIGHTING GP

489-5111 KIT-LIGHTING

489-5111 KIT-LIGHTING
S/N NAJ1-UP; PFL1-UP
PART OF 489-6301 KIT-WINDOW GUARD

153-2521 LAMP GP-FLOOD

153-2521 LAMP GP-FLOOD
S/N NAJ1-UP; PFL1-UP
24-VOLT
PART OF 319-1175, 319-1176 LIGHTING GP-BOOM

153-2522 LAMP GP-FLOOD

153-2522 LAMP GP-FLOOD
S/N PFL1-UP
24-VOLT

153-2523 LAMP GP-FLOOD

153-2523 LAMP GP-FLOOD
S/N NAJ1-UP; PFL1-UP
24-VOLT
PART OF 4I-5409 LIGHTING GP-FLOOD

325-4471 LAMP GP-FLOOD

325-4471 LAMP GP-FLOOD
S/N NAJ1-UP; PFL1-UP
24-VOLT
PART OF 319-1179 LIGHTING GP-FLOOD

334-6198 LAMP GP-FLOOD

334-6198 LAMP GP-FLOOD -HID
S/N NAJ1-UP; PFL1-UP
24-VOLT
PART OF 342-2965 LIGHTING GP-FLOOD

339-3505 LAMP GP-FLOOD

339-3505 LAMP GP-FLOOD
S/N NAJ1-UP; PFL1-UP
24-VOLT
PART OF 489-5111 KIT-LIGHTING, 319-1198 LIGHTING GP-FLOOD

319-1175 LIGHTING GP-BOOM

319-1175 LIGHTING GP-BOOM -REACH
S/N NAJ1-UP; PFL1-UP
PART OF 344-0773, 344-0776 BOOM AR-1 PIECE LONG

319-1176 LIGHTING GP-BOOM

319-1176 LIGHTING GP-BOOM
S/N NAJ1-UP; PFL1-UP
PART OF 470-6041 BOOM AR-MASS

319-1179 LIGHTING GP-FLOOD

319-1179 LIGHTING GP-FLOOD -CAB
S/N NAJ1-UP; PFL1-UP
PART OF 506-8971, 506-8972, 506-8973, 506-8974 DISTRIBUTION AR
CANNOT BE USED WITH @@@@@319-1198@@@@@, @@@@@342-2965@@@@@

319-1198 LIGHTING GP-FLOOD

319-1198 LIGHTING GP-FLOOD -CAB
S/N NAJ1-UP; PFL1-UP
FRONT WINDOW GUARD
CANNOT BE USED WITH @@@@@319-1179@@@@@, @@@@@342-2965@@@@@

342-2965 LIGHTING GP-FLOOD

342-2965 LIGHTING GP-FLOOD -CAB, HID
S/N NAJ1-UP; PFL1-UP
CANNOT BE USED WITH @@@@@319-1179@@@@@, @@@@@319-1198@@@@@

4I-5409 LIGHTING GP-FLOOD

4I-5409 LIGHTING GP-FLOOD -CHASSIS
S/N NAJ1-UP; PFL1-UP
PART OF 444-3845 ELECTRICAL AR

PANEL GP-CIRCUIT BREAKER

377-8175 PANEL & MTG GP-CIRCUIT BREAKER

377-8175 PANEL & MTG GP-CIRCUIT BREAKER
S/N NAJ1-UP; PFL1-UP
PART OF 444-3848 CONTROL & MONITOR GP-CAB

396-1789 PANEL GP-CIRCUIT BREAKER

396-1789 PANEL GP-CIRCUIT BREAKER
S/N NAJ1-UP; PFL1-UP
PART OF 377-8175 PANEL & MTG GP-CIRCUIT BREAKER

SENSOR GP

252-9628 MOUNTING GP-SENSOR

252-9628 MOUNTING GP-SENSOR
S/N NAJ1-UP; PFL1-UP
PART OF 521-4909, 539-9513 MOUNTING GP-RECEIVER
FOR USE WITH SATELLITE RECEIVER OR LASER TARGET

338-6839 SENSOR & MTG GP-POSITION

338-6839 SENSOR & MTG GP-POSITION -GRADE CONTROL, BOOM
S/N NAJ1-UP; PFL1-UP
PART OF 444-4117 GRADE CONTROL AR

338-6847 SENSOR & MTG GP-POSITION

338-6847 SENSOR & MTG GP-POSITION -GRADE CONTROL, STICK
S/N NAJ1-UP; PFL1-UP
PART OF 344-0776 BOOM AR-1 PIECE LONG, 470-6041 BOOM AR-MASS

446-6250 SENSOR & MTG GP-POSITION

446-6250 SENSOR & MTG GP-POSITION -BODY TILT
S/N NAJ1-UP; PFL1-UP
CANNOT BE USED WITH @@@@@446-6251@@@@@

446-6251 SENSOR & MTG GP-POSITION

446-6251 SENSOR & MTG GP-POSITION -BODY TILT SENSOR
S/N NAJ1-10012; PFL1-UP
PART OF 506-8971, 506-8972, 506-8973, 506-8974 DISTRIBUTION AR
CANNOT BE USED WITH @@@@@446-6250@@@@@

446-6251 SENSOR & MTG GP-POSITION

446-6251 SENSOR & MTG GP-POSITION -BODY TILT SENSOR
S/N NAJ10013-UP; PFL1-UP
PART OF 506-8971, 506-8972, 506-8973, 506-8974 DISTRIBUTION AR
CANNOT BE USED WITH @@@@@446-6250@@@@@

502-6771 SENSOR & MTG GP-POSITION

502-6771 SENSOR & MTG GP-POSITION -BUCKET
S/N NAJ1-UP; PFL1-UP
GRADE CONTROL
PART OF 502-9422, 502-9423 STICK AR-HOE

505-3701 SENSOR & MTG GP-POSITION

505-3701 SENSOR & MTG GP-POSITION -GRADE CONTROL,BUCKET
S/N NAJ10001-UP; PFL10001-UP
PART OF 502-9428 STICK AR-HOE

416-4729 SENSOR & MTG GP-PRESSURE

416-4729 SENSOR & MTG GP-PRESSURE
S/N NAJ1-UP; PFL1-UP
PART OF 469-6266 MODULE AR-CLEAN EMISSIONS

448-4566 SENSOR & MTG GP-SOOT

448-4566 SENSOR & MTG GP-SOOT
S/N NAJ1-UP; PFL1-UP
PART OF 448-4563 INSTALLATION AR-CEM

397-8790 SENSOR GP-ENGINE

397-8790 SENSOR GP-ENGINE
S/N SYE1-UP
PART OF 381-1732, 500-1854 ENGINE AR-CORE

423-6434 SENSOR GP-LIQUID LEVEL

423-6434 SENSOR GP-LIQUID LEVEL
S/N NAJ1-UP; PFL1-UP
PART OF 444-6651 LINES GP-FUEL

345-1948 SENSOR GP-POSITION

345-1948 SENSOR GP-POSITION
S/N NAJ1-UP; PFL1-UP
PART OF 338-6839, 338-6847 SENSOR & MTG GP-POSITION

293-5340 SENSOR GP-PRESSURE

293-5340 SENSOR GP-PRESSURE
S/N SYE1-UP
PART OF 422-8408 RAIL GP-FUEL

325-8634 SENSOR GP-PRESSURE

325-8634 SENSOR GP-PRESSURE
S/N SYE1-UP
PART OF 349-4570 BASE GP-FUEL FILTER

331-1134 SENSOR GP-PRESSURE

331-1134 SENSOR GP-PRESSURE
S/N SYE1-UP
PART OF 397-8790 SENSOR GP-ENGINE

332-0296 SENSOR GP-PRESSURE

332-0296 SENSOR GP-PRESSURE
S/N SYE1-UP
PART OF 397-8790 SENSOR GP-ENGINE

338-6970 SENSOR GP-PRESSURE

338-6970 SENSOR GP-PRESSURE
S/N NAJ1-UP; PFL1-UP
PART OF 383-9517 LINES GP-BOOM CYLINDER, 383-9510 VALVE & LINES GP-PILOT

338-6971 SENSOR GP-PRESSURE

338-6971 SENSOR GP-PRESSURE
S/N NAJ1-UP; PFL1-UP
PART OF 378-9340, 378-9345, 378-9350, 378-9375 VALVE GP-CONTROL

343-1771 SENSOR GP-PRESSURE

343-1771 SENSOR GP-PRESSURE
S/N NAJ1-UP; PFL1-UP
PART OF 398-3755 SENSOR GP-PRESSURE

344-1211 SENSOR GP-PRESSURE

344-1211 SENSOR GP-PRESSURE
S/N NAJ1-UP; PFL1-UP
PART OF 415-2405 MANIFOLD GP-INLET

385-1173 SENSOR GP-PRESSURE

385-1173 SENSOR GP-PRESSURE
S/N SYE1-UP
NRS DIFFERENTIAL
PART OF 397-8790 SENSOR GP-ENGINE

398-3755 SENSOR GP-PRESSURE

398-3755 SENSOR GP-PRESSURE
S/N NAJ1-UP; PFL1-UP
PART OF 416-4729 SENSOR & MTG GP-PRESSURE

236-6221 SENSOR GP-SPEED

236-6221 SENSOR GP-SPEED -ENGINE TIMING
S/N SYE1-UP
PART OF 397-8790 SENSOR GP-ENGINE

234-5012 SENSOR GP-TEMPERATURE

234-5012 SENSOR GP-TEMPERATURE
S/N SYE1-UP
PART OF 397-8790 SENSOR GP-ENGINE

234-5013 SENSOR GP-TEMPERATURE

234-5013 SENSOR GP-TEMPERATURE
S/N SYE1-UP
PART OF 349-4570 BASE GP-FUEL FILTER, 397-8790 SENSOR GP-ENGINE

338-6849 GUARD GP-SENSOR

338-6849 GUARD GP-SENSOR
S/N NAJ1-UP; PFL1-UP
PART OF 344-0776 BOOM AR-1 PIECE LONG, 470-6041 BOOM AR-MASS

SOLENOID GP

337-7323 VALVE GP-EXHAUST GAS (NRS)

337-7323 VALVE GP-EXHAUST GAS (NRS)
S/N SYE1-UP
PART OF 347-9431 VALVE & MOUNTING GP (NRS)

STARTING AID GP

324-4376 STARTING AID GP-ETHER

324-4376 STARTING AID GP-ETHER
S/N NAJ1-UP; PFL1-UP
PART OF 506-8971, 506-8972, 506-8973, 506-8974 DISTRIBUTION AR, 466-2765 OPTION AR-REGIONAL

239-1134 VALVE GP-ETHER STARTING

239-1134 VALVE GP-ETHER STARTING
S/N NAJ1-UP; PFL1-UP
PART OF 324-4376 STARTING AID GP-ETHER

STARTING MOTOR GP

3T-9525 PLATE AS-BRUSH

3T-9525 PLATE AS-BRUSH
S/N SYE1-UP
PART OF 349-6536 STARTING MOTOR GP-ELECTRIC

349-6536 STARTING MOTOR GP-ELECTRIC

349-6536 STARTING MOTOR GP-ELECTRIC
S/N SYE1-UP
24-VOLT
PART OF 355-6044 STARTING MOTOR GP-ELECTRIC

355-6044 STARTING MOTOR GP-ELECTRIC

355-6044 STARTING MOTOR GP-ELECTRIC
S/N SYE1-UP
PART OF 485-9800, 516-4820 ENGINE AR-COMPLETE

SWITCH GP

357-3849 SWITCH & MTG GP-LIMIT

357-3849 SWITCH & MTG GP-LIMIT -WINDOW WIPER
S/N NAJ1-UP; PFL1-UP
PART OF 316-8853 INSTALLATION AR-CAB

7N-0719 SWITCH GP-DISCONNECT

7N-0719 SWITCH GP-DISCONNECT -BATTERY
S/N NAJ1-UP; PFL1-UP
PART OF 444-3846 BATTERY & WIRING GP

357-3967 SWITCH GP-LIMIT

357-3967 SWITCH GP-LIMIT -WIPER
S/N NAJ1-UP; PFL1-UP
PART OF 357-3849 SWITCH & MTG GP-LIMIT

383-5711 SWITCH GP-POSITION

383-5711 SWITCH GP-POSITION -HYDRAULIC LOCKOUT
S/N NAJ1-UP; PFL1-UP
PART OF 316-8822 CONSOLE GP-OPERATOR

255-2752 SWITCH GP-START

255-2752 SWITCH GP-START
S/N NAJ1-UP; PFL1-UP
PART OF 328-0246 PANEL GP-SWITCH, 328-0391 SWITCH GP-START

328-0391 SWITCH GP-START

328-0391 SWITCH GP-START
S/N NAJ1-UP; PFL1-UP
PART OF 319-0885, 369-0146 WIRING GP-COMMUNICATION

324-5768 SWITCH GP-WIPER

324-5768 SWITCH GP-WIPER -LOWER
S/N NAJ1-UP; PFL1-UP
PART OF 316-8853 INSTALLATION AR-CAB

VALVE GP

337-7323 VALVE GP-EXHAUST GAS (NRS)

337-7323 VALVE GP-EXHAUST GAS (NRS)
S/N SYE1-UP
PART OF 347-9431 VALVE & MOUNTING GP (NRS)

WIRING GP

319-1193 BATTERY & WIRING GP

319-1193 BATTERY & WIRING GP -COLD WEATHER
S/N NAJ1-UP; PFL1-UP
WITHOUT JUMP START

444-3846 BATTERY & WIRING GP

444-3846 BATTERY & WIRING GP
S/N NAJ1-UP; PFL1-UP
PART OF 444-3845 ELECTRICAL AR

444-3845 ELECTRICAL AR

444-3845 ELECTRICAL AR
S/N NAJ1-UP; PFL1-UP
PART OF 444-4128, 444-4129 COMMON AR

389-2633 ELECTRICAL GP-DEF

389-2633 ELECTRICAL GP-DEF
S/N NAJ1-UP; PFL1-UP
24-VOLT
PART OF 370-5668, 499-6634 MODULE AR-DIESEL EXHAUST FLUID

526-5293 HARNESS AS-FRONT

526-5293 HARNESS AS-FRONT -GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 488-0536 WIRING GP-FRONT
FOR USE WITH 3.9-M (12.8-FT) STICK

526-5295 HARNESS AS-FRONT

526-5295 HARNESS AS-FRONT -GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 488-0538 WIRING GP-FRONT
FOR USE WITH 2.8-M (9.2-FT) STICK

526-5296 HARNESS AS-FRONT

526-5296 HARNESS AS-FRONT -GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 488-0539 WIRING GP-FRONT
FOR USE WITH 2.55-M (8.4-FT) STICK

342-3641 INSTALLATION AR

342-3641 INSTALLATION AR -FRONT WINDOW WIPER
S/N NAJ1-UP; PFL1-UP
FOR USE WITH 1-PIECE WINDOW

513-2945 KIT-GRADE CONTROL

513-2945 KIT-GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
ELECTRICAL HYDRAULIC OVERLAY KIT

367-7314 MOUNTING GP-CONNECTOR

367-7314 MOUNTING GP-CONNECTOR -ENGINE
S/N SYE1-UP
PART OF 485-9800, 516-4820 ENGINE AR-COMPLETE
FOR USE WITH T4F EXTERNAL HARNESS, FUEL COOLED ECMS, AIR COOLED ECM
CANNOT BE USED WITH T4I EXTERNAL HARNESS

328-0054 WIRING GP-CAB

328-0054 WIRING GP-CAB -ROOF
S/N NAJ1-UP; PFL1-UP
PART OF 444-3848 CONTROL & MONITOR GP-CAB

328-0103 WIRING GP-CAB

328-0103 WIRING GP-CAB -FRONT, RH
S/N NAJ1-UP; PFL1-UP
PART OF 444-3848 CONTROL & MONITOR GP-CAB

377-8217 WIRING GP-CAB

377-8217 WIRING GP-CAB
S/N NAJ1-UP; PFL1-UP
PART OF 445-2848 CONTROL AR-AUXILIARY

432-6275 WIRING GP-CAB

432-6275 WIRING GP-CAB -CAMERA
S/N NAJ1-UP; PFL1-UP
PART OF 444-4131, 493-5718 CAMERA & MIRROR AR

444-3849 WIRING GP-CAB

444-3849 WIRING GP-CAB -REAR, RH
S/N NAJ1-UP; PFL1-UP
PART OF 444-3848 CONTROL & MONITOR GP-CAB

447-0415 WIRING GP-CAB

447-0415 WIRING GP-CAB -GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 444-4117 GRADE CONTROL AR

380-5463 WIRING GP-CEM

380-5463 WIRING GP-CEM
S/N NAJ1-UP; PFL1-UP
PART OF 469-6266 MODULE AR-CLEAN EMISSIONS

380-5464 WIRING GP-CEM

380-5464 WIRING GP-CEM
S/N NAJ1-UP; PFL1-UP
PART OF 380-5463 WIRING GP-CEM

447-5113 WIRING GP-CEM

447-5113 WIRING GP-CEM -EXHAUST MODULE
S/N NAJ1-UP; PFL1-UP
PART OF 444-3845 ELECTRICAL AR

444-3855 WIRING GP-CHASSIS

444-3855 WIRING GP-CHASSIS -CAMERA
S/N NAJ1-UP; PFL1-UP
PART OF 444-4131, 493-5718 CAMERA & MIRROR AR

444-3856 WIRING GP-CHASSIS

444-3856 WIRING GP-CHASSIS -MEDIUM PRESSURE
S/N NAJ1-UP; PFL1-UP
PART OF 445-2848 CONTROL AR-AUXILIARY

444-3862 WIRING GP-CHASSIS

444-3862 WIRING GP-CHASSIS -GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 444-4117 GRADE CONTROL AR
Type 1

444-3862 WIRING GP-CHASSIS

444-3862 WIRING GP-CHASSIS -GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 444-4117 GRADE CONTROL AR
Type 2

319-0885 WIRING GP-COMMUNICATION

319-0885 WIRING GP-COMMUNICATION -MACHINE SECURITY SYSTEM
S/N NAJ1-UP; PFL1-UP
PART OF 337-8363 INSTALLATION GP-SECURITY
Type 1

319-0885 WIRING GP-COMMUNICATION

319-0885 WIRING GP-COMMUNICATION -MACHINE SECURITY SYSTEM
S/N NAJ1-UP; PFL1-UP
PART OF 337-8363 INSTALLATION GP-SECURITY
Type 2

328-0023 WIRING GP-COMMUNICATION

328-0023 WIRING GP-COMMUNICATION -PRODUCT LINK
S/N NAJ1-UP; PFL1-UP
PART OF 337-8360 CONTROL AR-COMMUNICATION

369-0146 WIRING GP-COMMUNICATION

369-0146 WIRING GP-COMMUNICATION -MACHINE SECURITY SYSTEM
S/N NAJ1-UP; PFL1-UP
PART OF 366-8683 INSTALLATION GP-SECURITY

377-8211 WIRING GP-CONSOLE

377-8211 WIRING GP-CONSOLE
S/N NAJ1-UP; PFL1-UP
PART OF 444-3848 CONTROL & MONITOR GP-CAB

377-8212 WIRING GP-CONSOLE

377-8212 WIRING GP-CONSOLE -LH
S/N NAJ1-UP; PFL1-UP
PART OF 377-8211 WIRING GP-CONSOLE

377-8213 WIRING GP-CONSOLE

377-8213 WIRING GP-CONSOLE -RH
S/N NAJ1-UP; PFL1-UP
PART OF 377-8211 WIRING GP-CONSOLE

328-0247 WIRING GP-CONVERTER

328-0247 WIRING GP-CONVERTER -12-VOLT, 10-AMPERE
S/N NAJ1-UP; PFL1-UP
PART OF 444-3848 CONTROL & MONITOR GP-CAB

396-3860 WIRING GP-DEF MODULE

396-3860 WIRING GP-DEF MODULE
S/N NAJ1-UP; PFL1-UP
24-VOLT PUMP ELECTRONIC TANK UNIT
PART OF 370-5668 MODULE AR-DIESEL EXHAUST FLUID

504-3173 WIRING GP-DEF MODULE

504-3173 WIRING GP-DEF MODULE
S/N NAJ1-UP; PFL1-UP
PART OF 499-6634 MODULE AR-DIESEL EXHAUST FLUID
Type 1

504-3173 WIRING GP-DEF MODULE

504-3173 WIRING GP-DEF MODULE
S/N NAJ1-UP; PFL1-UP
PART OF 499-6634 MODULE AR-DIESEL EXHAUST FLUID
Type 2

488-6384 WIRING GP-ELECTRONIC CONTROL

488-6384 WIRING GP-ELECTRONIC CONTROL
S/N SYE1-UP
PART OF 485-9800, 516-4820 ENGINE AR-COMPLETE

349-1502 WIRING GP-ENGINE

349-1502 WIRING GP-ENGINE -FUEL
S/N SYE1-UP
PART OF 485-9800, 516-4820 ENGINE AR-COMPLETE
CANNOT BE USED WITH ENGINE MOUNTED SECONDARY FUEL FILTER AND INTAKE AIR HEATER RELAY

319-1275 WIRING GP-FRONT

319-1275 WIRING GP-FRONT -GRADE CONTROL, BOOM
S/N NAJ1-UP; PFL1-UP
PART OF 344-0776 BOOM AR-1 PIECE LONG

319-1286 WIRING GP-FRONT

319-1286 WIRING GP-FRONT -GRADE CONTROL, STICK
S/N NAJ1-UP; PFL1-UP
PART OF 444-4153 STICK AR-HOE
FOR USE WITH 3.9-M (12.8-FT) STICK

336-6084 WIRING GP-FRONT

336-6084 WIRING GP-FRONT -GRADE CONTROL, STICK
S/N NAJ1-UP; PFL1-UP
PART OF 444-4150 STICK AR-HOE
FOR USE WITH 3.2-M (10.5-FT) STICK

465-7791 WIRING GP-FRONT

465-7791 WIRING GP-FRONT -GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 467-8376 STICK AR-HOE
FOR USE WITH 2.8-M (9.2-FT) STICK

470-7452 WIRING GP-FRONT

470-7452 WIRING GP-FRONT -GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
MASS BOOM
PART OF 470-6041 BOOM AR-MASS

470-7453 WIRING GP-FRONT

470-7453 WIRING GP-FRONT -GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 470-6042 STICK AR-HOE
FOR USE WITH 2.55-M (8.4-FT) STICK

488-0536 WIRING GP-FRONT

488-0536 WIRING GP-FRONT -GRADE CONTROL, STICK
S/N NAJ1-UP; PFL1-UP
PART OF 488-0473 STICK AR-HOE
Type 1

488-0536 WIRING GP-FRONT

488-0536 WIRING GP-FRONT -GRADE CONTROL, STICK
S/N NAJ1-UP; PFL1-UP
PART OF 488-0473 STICK AR-HOE
Type 2

488-0538 WIRING GP-FRONT

488-0538 WIRING GP-FRONT -GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 488-0477 STICK AR-HOE
Type 1
FOR USE WITH 2.8-M (9.2-FT)

488-0538 WIRING GP-FRONT

488-0538 WIRING GP-FRONT -GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 488-0477 STICK AR-HOE
Type 2
FOR USE WITH 2.8-M (9.2-FT)

488-0539 WIRING GP-FRONT

488-0539 WIRING GP-FRONT -GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 488-0481 STICK AR-HOE
Type 1
FOR USE WITH 2.55-M (8.4-FT)

488-0539 WIRING GP-FRONT

488-0539 WIRING GP-FRONT -GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 488-0481 STICK AR-HOE
Type 2
FOR USE WITH 2.55-M (8.4-FT)

502-6773 WIRING GP-FRONT

502-6773 WIRING GP-FRONT
S/N NAJ10001-UP; PFL10001-UP
GRADE CONTROL
PART OF 502-9423 STICK AR-HOE
FOR USE WITH 3.2-M (10.5-FT) STICK

502-6774 WIRING GP-FRONT

502-6774 WIRING GP-FRONT
S/N NAJ1-UP; PFL1-UP
GRADE CONTROL
PART OF 502-9422 STICK AR-HOE
FOR USE WITH 2.8-M STICK (9.2-FT)

502-6775 WIRING GP-FRONT

502-6775 WIRING GP-FRONT
S/N NAJ10001-UP; PFL10001-UP
GRADE CONTROL
PART OF 502-9428 STICK AR-HOE
FOR USE WITH 2.55-M (8.4-FT) STICK

377-8219 WIRING GP-MEDIUM PRESSURE

377-8219 WIRING GP-MEDIUM PRESSURE
S/N NAJ1-UP; PFL1-UP
PART OF 383-5030 CONTROL AR-AUXILIARY

377-8214 WIRING GP-PLATFORM

377-8214 WIRING GP-PLATFORM
S/N NAJ1-UP; PFL1-UP
PART OF 444-3848 CONTROL & MONITOR GP-CAB

356-0811 WIRING GP-SENSOR

356-0811 WIRING GP-SENSOR -ENGINE OIL LEVEL
S/N SYE1-UP
PART OF 485-9800, 516-4820 ENGINE AR-COMPLETE

343-9066 WIRING GP-UNIT INJECTOR

343-9066 WIRING GP-UNIT INJECTOR
S/N SYE1-UP
PART OF 381-1732, 500-1854 ENGINE AR-CORE
FOR USE WITH UNIT INJECTORS WITHOUT BRAKE
CANNOT BE USED WITH UNIT INJECTORS WITH BRAKE

458-9424 WIRING GP-VALVE

458-9424 WIRING GP-VALVE
S/N NAJ1-UP; PFL1-UP
PART OF 378-9360 VALVE AR-MAIN CONTROL

458-9425 WIRING GP-VALVE

458-9425 WIRING GP-VALVE
S/N NAJ1-UP; PFL1-UP
PART OF 378-9370 VALVE AR-MAIN CONTROL

RELAY GP

347-1934 RELAY GP

347-1934 RELAY GP -ARD NOZZLE HEATER
S/N NAJ1-UP; PFL1-UP
PART OF 469-6266 MODULE AR-CLEAN EMISSIONS

ELECTRONICS GP-MONITOR

378-3184 CONTROL & MTG GP-ELECTRONIC

378-3184 CONTROL & MTG GP-ELECTRONIC -DIESEL EXHAUST FLUID
S/N NAJ1-UP; PFL1-UP
PART OF 370-5668 MODULE AR-DIESEL EXHAUST FLUID

378-9358 CONTROL & MTG GP-ELECTRONIC

378-9358 CONTROL & MTG GP-ELECTRONIC -MAIN CONTROL VALVE
S/N NAJ1-UP; PFL1-UP
PART OF 378-9360 VALVE AR-MAIN CONTROL

378-9368 CONTROL & MTG GP-ELECTRONIC

378-9368 CONTROL & MTG GP-ELECTRONIC -MAIN CONTROL VALVE
S/N NAJ1-UP; PFL1-UP
PART OF 378-9370 VALVE AR-MAIN CONTROL

499-6629 CONTROL & MTG GP-ELECTRONIC

499-6629 CONTROL & MTG GP-ELECTRONIC -DEF
S/N NAJ1-UP; PFL1-UP
PART OF 499-6634 MODULE AR-DIESEL EXHAUST FLUID

503-8026 ELECTRONICS GP-MONITOR

503-8026 ELECTRONICS GP-MONITOR
S/N NAJ1-UP; PFL1-UP
PART OF 540-6526 MONITOR GP-OPERATOR

517-4913 ELECTRONICS GP-MONITOR

517-4913 ELECTRONICS GP-MONITOR
S/N NAJ1-UP; PFL1-UP
PART OF 504-1198 INSTALLATION AR-COMMUNICATION

555-2380 ELECTRONICS GP-MONITOR

555-2380 ELECTRONICS GP-MONITOR -TELEMATICS
S/N NAJ10001-UP; PFL10001-UP
CELLULAR
PART OF 504-1198 INSTALLATION AR-COMMUNICATION

444-3848 CONTROL & MONITOR GP-CAB

444-3848 CONTROL & MONITOR GP-CAB
S/N NAJ1-UP; PFL1-UP
PART OF 444-3845 ELECTRICAL AR

HEATER GP

339-6916 HEATER GP-JACKET WATER

339-6916 HEATER GP-JACKET WATER -REAR
S/N NAJ1-UP; PFL1-UP
120-VOLT, 1500-WATT

ELECTRONICS GP-COMMUNICATION

459-3701 CONTROL & MTG GP-COMMUNICATION

459-3701 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK
S/N NAJ1-UP; PFL1-UP
PART OF 460-1147 INSTALLATION AR-COMMUNICATION

504-1199 CONTROL & MTG GP-COMMUNICATION

504-1199 CONTROL & MTG GP-COMMUNICATION -PL641E CELLULAR
S/N NAJ1-UP; PFL1-UP
PART OF 504-1198 INSTALLATION AR-COMMUNICATION

337-8360 CONTROL AR-COMMUNICATION

337-8360 CONTROL AR-COMMUNICATION -PRODUCT LINK 321SR
S/N NAJ1-UP; PFL1-UP
PART OF 466-2765 OPTION AR-REGIONAL

417-4722 CONTROL GP-COMMUNICATION

417-4722 CONTROL GP-COMMUNICATION -NETWORK MANAGER
S/N NAJ1-UP; PFL1-UP
PART OF 504-1199 CONTROL & MTG GP-COMMUNICATION

454-0437 CONTROL GP-COMMUNICATION

454-0437 CONTROL GP-COMMUNICATION -PRODUCT LINK, JAPAN
S/N NAJ1-UP; PFL1-UP
PART OF 319-4455 INSTALLATION GP-COMMUNICATION

460-1147 INSTALLATION AR-COMMUNICATION

460-1147 INSTALLATION AR-COMMUNICATION -INTERNATIONAL
S/N NAJ1-UP; PFL1-UP

504-1198 INSTALLATION AR-COMMUNICATION

504-1198 INSTALLATION AR-COMMUNICATION -PL641E CELLULAR
S/N NAJ10001-UP; PFL10001-UP
INTERNATIONAL

519-1688 INSTALLATION AR-COMMUNICATION

519-1688 INSTALLATION AR-COMMUNICATION -GRADE CONTROL
S/N NAJ1-UP; PFL1-UP

319-4455 INSTALLATION GP-COMMUNICATION

319-4455 INSTALLATION GP-COMMUNICATION -PRODUCT LINK 321SR
S/N NAJ1-UP; PFL1-UP
PART OF 337-8360 CONTROL AR-COMMUNICATION

521-4911 INSTALLATION GP-COMMUNICATION

521-4911 INSTALLATION GP-COMMUNICATION -ELECTRONIC CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 519-1688 INSTALLATION AR-COMMUNICATION

319-0885 WIRING GP-COMMUNICATION

319-0885 WIRING GP-COMMUNICATION -MACHINE SECURITY SYSTEM
S/N NAJ1-UP; PFL1-UP
PART OF 337-8363 INSTALLATION GP-SECURITY
Type 1

319-0885 WIRING GP-COMMUNICATION

319-0885 WIRING GP-COMMUNICATION -MACHINE SECURITY SYSTEM
S/N NAJ1-UP; PFL1-UP
PART OF 337-8363 INSTALLATION GP-SECURITY
Type 2

328-0023 WIRING GP-COMMUNICATION

328-0023 WIRING GP-COMMUNICATION -PRODUCT LINK
S/N NAJ1-UP; PFL1-UP
PART OF 337-8360 CONTROL AR-COMMUNICATION

369-0146 WIRING GP-COMMUNICATION

369-0146 WIRING GP-COMMUNICATION -MACHINE SECURITY SYSTEM
S/N NAJ1-UP; PFL1-UP
PART OF 366-8683 INSTALLATION GP-SECURITY

459-3700 MOUNTING GP-ANTENNA

459-3700 MOUNTING GP-ANTENNA -PRODUCT LINK
S/N NAJ1-UP; PFL1-UP
PART OF 460-1147, 504-1198 INSTALLATION AR-COMMUNICATION

BLOCK GP-JUNCTION

399-3435 BLOCK GP-JUNCTION

399-3435 BLOCK GP-JUNCTION -TERMINAL
S/N NAJ1-UP; PFL1-UP
PART OF 396-1789 PANEL GP-CIRCUIT BREAKER

CAMERA GP

416-5123 CAMERA & MOUNTING GP

416-5123 CAMERA & MOUNTING GP -WORK AREA VISUAL SYSTEM, REAR
S/N NAJ1-UP; PFL1-UP
PART OF 444-4131, 493-5718 CAMERA & MIRROR AR

444-4131 CAMERA & MIRROR AR

444-4131 CAMERA & MIRROR AR
S/N NAJ1-UP; PFL1-UP

493-5718 CAMERA & MIRROR AR

493-5718 CAMERA & MIRROR AR -REAR VIEW
S/N NAJ1-UP; PFL1-UP
PART OF 506-8971, 506-8972, 506-8973, 506-8974 DISTRIBUTION AR

RECEIVER GP

521-4909 MOUNTING GP-RECEIVER

521-4909 MOUNTING GP-RECEIVER
S/N NAJ1-UP; PFL1-UP
PART OF 519-1688 INSTALLATION AR-COMMUNICATION

539-9513 MOUNTING GP-RECEIVER

539-9513 MOUNTING GP-RECEIVER
S/N NAJ1-UP; PFL1-UP
PART OF 519-1688 INSTALLATION AR-COMMUNICATION

349-2167 RECEIVER GP-LASER

349-2167 RECEIVER GP-LASER -GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 444-4150, 444-4153, 467-8376, 470-6042, 488-0473, 488-0477, 488-0481, 502-9422, 502-9423, 502-9428 STICK AR-HOE

HARNESS GP

483-2890 HARNESS AS-CAB

483-2890 HARNESS AS-CAB -REAR, RH
S/N NAJ1-UP; PFL1-UP
PART OF 444-3849 WIRING GP-CAB

380-5465 HARNESS AS-CEM

380-5465 HARNESS AS-CEM
S/N NAJ1-UP; PFL1-UP
PART OF 380-5464 WIRING GP-CEM

522-3475 HARNESS AS-CEM

522-3475 HARNESS AS-CEM
S/N NAJ1-UP; PFL1-UP
PART OF 504-3173 WIRING GP-DEF MODULE

502-6756 HARNESS AS-CHASSIS

502-6756 HARNESS AS-CHASSIS
S/N NAJ1-UP; PFL1-UP
PART OF 444-3846 BATTERY & WIRING GP

526-0394 HARNESS AS-CHASSIS

526-0394 HARNESS AS-CHASSIS -GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 444-3862 WIRING GP-CHASSIS

396-3862 HARNESS AS-CONTROL

396-3862 HARNESS AS-CONTROL -DIESEL EXHAUST FLUID
S/N NAJ1-UP; PFL1-UP
24-VOLT, PUMP ELECTRONIC TANK UNIT
PART OF 396-3860 WIRING GP-DEF MODULE

504-3085 HARNESS AS-CONTROL

504-3085 HARNESS AS-CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 504-3173 WIRING GP-DEF MODULE

520-6047 HARNESS AS-CONTROL

520-6047 HARNESS AS-CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 521-4911 INSTALLATION GP-COMMUNICATION

349-1503 HARNESS AS-ENGINE

349-1503 HARNESS AS-ENGINE
S/N SYE1-UP
PART OF 349-1502 WIRING GP-ENGINE

476-2142 HARNESS AS-ENGINE

476-2142 HARNESS AS-ENGINE
S/N SYE1-UP
PART OF 476-2144 HARNESS AS-ENGINE

476-2144 HARNESS AS-ENGINE

476-2144 HARNESS AS-ENGINE
S/N SYE1-UP
PART OF 488-6384 WIRING GP-ELECTRONIC CONTROL

487-2116 HARNESS AS-ENGINE

487-2116 HARNESS AS-ENGINE
S/N SYE1-UP
WITHOUT BRAKES
PART OF 343-9066 WIRING GP-UNIT INJECTOR

526-5293 HARNESS AS-FRONT

526-5293 HARNESS AS-FRONT -GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 488-0536 WIRING GP-FRONT
FOR USE WITH 3.9-M (12.8-FT) STICK

526-5295 HARNESS AS-FRONT

526-5295 HARNESS AS-FRONT -GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 488-0538 WIRING GP-FRONT
FOR USE WITH 2.8-M (9.2-FT) STICK

526-5296 HARNESS AS-FRONT

526-5296 HARNESS AS-FRONT -GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
PART OF 488-0539 WIRING GP-FRONT
FOR USE WITH 2.55-M (8.4-FT) STICK

336-5964 HARNESS AS-LIGHTING

336-5964 HARNESS AS-LIGHTING
S/N NAJ1-UP; PFL1-UP
PART OF 489-5111 KIT-LIGHTING, 319-1198 LIGHTING GP-FLOOD

350-8490 HARNESS AS-POWER

350-8490 HARNESS AS-POWER
S/N NAJ1-UP; PFL1-UP
PART OF 319-0885, 369-0146 WIRING GP-COMMUNICATION

349-1504 HARNESS AS-SENSOR

349-1504 HARNESS AS-SENSOR
S/N SYE1-UP
PART OF 349-1503 HARNESS AS-ENGINE

350-8151 HARNESS AS-SENSOR

350-8151 HARNESS AS-SENSOR
S/N NAJ1-UP; PFL1-UP
PART OF 444-3846 BATTERY & WIRING GP

504-9444 HARNESS AS-SENSOR

504-9444 HARNESS AS-SENSOR
S/N NAJ1-UP; PFL1-UP
PART OF 502-6773, 502-6774, 502-6775 WIRING GP-FRONT

355-1642 HARNESS AS-SWITCH

355-1642 HARNESS AS-SWITCH
S/N SYE1-UP
PART OF 355-6044 STARTING MOTOR GP-ELECTRIC

292-0305 HARNESS AS-WIRING

292-0305 HARNESS AS-WIRING
S/N NAJ1-UP; PFL1-UP
PART OF 539-9513 MOUNTING GP-RECEIVER

380-3896 HARNESS AS-WIRING

380-3896 HARNESS AS-WIRING -DEF INJECTOR
S/N NAJ1-UP; PFL1-UP
PART OF 380-5464 WIRING GP-CEM

441-4482 HARNESS AS-WIRING

441-4482 HARNESS AS-WIRING
S/N SYE1-UP
WITHOUT BRAKES
PART OF 487-2116 HARNESS AS-ENGINE

513-2945 KIT-GRADE CONTROL

513-2945 KIT-GRADE CONTROL
S/N NAJ1-UP; PFL1-UP
ELECTRICAL HYDRAULIC OVERLAY KIT

Information:

(For parts list, see above)

ELECTRICAL AND STARTING SYSTEM

ALARM GP

Operation and Maintenance Manual

Travel Alarm - Test - If Equipped
336F XE Excavator

Selective Catalytic Reduction Warning System
336F XE Excavator

Troubleshooting

Alarm - Test
336F Excavator

ALTERNATOR GP-CHARGING

Engine News

Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}

Operation and Maintenance Manual

Belt - Inspect/Adjust/Replace
336F XE Excavator

Special Instruction

Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}

Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}

Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}

Specifications

Alternator and Regulator
C9.3 Tier 4 Final Engines

Testing and Adjusting

Charging System - Test
C9.3 Tier 4 Final Engines

Troubleshooting

Alternator Problem - Charging Problem and/or Noisy Operation
C9.3 Tier 4 Final Engines

Disassembly and Assembly

Alternator - Remove and Install
336F Excavator Engine Supplement

Service Magazine

Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}

BATTERY GP

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
336F XE Excavator

Battery - Clean
336F XE Excavator

Battery Hold-Down - Tighten
336F XE Excavator

Battery - Recycle
336F XE Excavator

Fuses - Replace
336F XE Excavator

Tool Operating Manual

M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}

M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}

Testing and Adjusting

Battery - Test
C9.3 Tier 4 Final Engines

Troubleshooting

Battery Problem
C9.3 Tier 4 Final Engines

Electrical Power Supply - Test
C9.3 Tier 4 Final Engines

Electrical Power Supply - Test
336F Excavator

Electrical Power Supply - Test
2D and 3D GRADE System for Hydraulic Excavators

Disassembly and Assembly

Battery - Remove and Install
336F Excavator Engine Supplement

CONTROL GP

Testing and Adjusting

Joystick and Pedal - Calibrate
336F XE Excavator Machine System

CONTROL GP-ELECTRONIC

Operation and Maintenance Manual

Product Link - PL631 - If Equipped
Regulatory Compliance Information

Product Link - PL641 - If Equipped
Regulatory Compliance Information

General Information
Regulatory Compliance Information

Product Link - PL631V2 - If Equipped
Regulatory Compliance Information

Special Instruction

Cat Production Measurement System (CPM) Auto Calibration Procedure for Certain 336F XE, 349F XE, 352F XE, 374F, and 390F Excavators {1408, 1901, 7610, 7620}
Cat Production Measurement System (CPM) Auto Calibration Procedure for Certain 336F XE, 349F XE, 352F XE, 374F, and 390F Excavators {1408, 1901, 7610, 7620}

Disassembly and Assembly

Electronic Control (Diesel Exhaust Fluid) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Electronic Control (Diesel Exhaust Fluid) - Remove and Install
336F Excavator Engine Supplement

Service Magazine

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Improved B and E Series Hammer Work Tool Parameters are Now Available for Certain Hydraulic Excavators {5488, 6333, 7490, 7610, 7620}
Improved B and E Series Hammer Work Tool Parameters are Now Available for Certain Hydraulic Excavators {5488, 6333, 7490, 7610, 7620}

ELECTRONICS GP-ENGINE

Engine News

A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Special Instruction

Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}

Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ^® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}

Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}

Diesel Exhaust Fluid Quality Sensor Updates on C9.3 - C18 Tier 4 Final Engines {108U, 1920}
Diesel Exhaust Fluid Quality Sensor Updates on C9.3 - C18 Tier 4 Final Engines {108U, 1920}

Technical Information Bulletin

A Low Intake Pressure Code May Falsely Trip on Certain C9.3, C13, C15, and C18Industrial and Machine Tier 4 Final Engines {7432, 7620}
A Low Intake Pressure Code May Falsely Trip on Certain C9.3, C13, C15, and C18Industrial and Machine Tier 4 Final Engines {7432, 7620}

Troubleshooting

System Overview
C9.3 Tier 4 Final Engines

Engine Monitoring System
C9.3 Tier 4 Final Engines

Diagnostic Capabilities
C9.3 Tier 4 Final Engines

Configuration Parameters
C9.3 Tier 4 Final Engines

Engine Shutdown Occurrence
C9.3 Tier 4 Final Engines

Engine Shutdown Occurs Intermittently
C9.3 Tier 4 Final Engines

Engine Shutdown While Idling
C9.3 Tier 4 Final Engines

Engine Stalls at Low RPM
C9.3 Tier 4 Final Engines

Cat ET Service Features
C9.3 Tier 4 Final Engines

Customer Passwords
C9.3 Tier 4 Final Engines

Factory Passwords
C9.3 Tier 4 Final Engines

ECM Will Not Accept Factory Passwords
C9.3 Tier 4 Final Engines

Test ECM Mode
C9.3 Tier 4 Final Engines

ECM Software - Install
C9.3 Tier 4 Final Engines

ECM - Replace
C9.3 Tier 4 Final Engines

Engine Overcrank Occurrence
C9.3 Tier 4 Final Engines

Data Link Configuration Status - Test
C9.3 Tier 4 Final Engines

Cat ET Service Error Identifiers
C9.3 Tier 4 Final Engines

Electronic Service Tool Does Not Communicate
C9.3 Tier 4 Final Engines

Diagnostic Trouble Codes
C9.3 Tier 4 Final Engines

Event Codes
C9.3 Tier 4 Final Engines

Data Link - Test
C9.3 Tier 4 Final Engines

DEF Control Module Power - Test
C9.3 Tier 4 Final Engines

Shutdown (Ground Level) - Test
C9.3 Tier 4 Final Engines

Timing - Calibrate
C9.3 Tier 4 Final Engines

Disassembly and Assembly

Engine Control Module - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Engine Electronic Control - Remove and Install
336F Excavator Engine Supplement

Speed/Timing Sensor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Electronic Control (Diesel Exhaust Fluid) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Electronic Control (Aftertreatment) - Remove and Install
336F Excavator Engine Supplement

Electronic Control (Diesel Exhaust Fluid) - Remove and Install
336F Excavator Engine Supplement

Service Magazine

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
New Machine Software for Cat^® Product Link Is Now Available on Certain Cat^® Products {7490, 7606, 7610, 7620}

New Software Is Now Used on Certain C9.3, C13, C15, and C18 Tier 4 Final Machine Engines {7620}
New Software Is Now Used on Certain C9.3, C13, C15, and C18 Tier 4 Final Machine Engines {7620}

New Software Updates Are Now Used On Certain Tier 4 Final Machines {1920}
New Software Updates Are Now Used On Certain Tier 4 Final Machines {1920}

Updated Engine Software is Now Used on Certain Cat® Machine Engines {1901, 1920}
Updated Engine Software is Now Used on Certain Cat^® Machine Engines {1901, 1920}

ELECTRONICS GP-POWER TRAIN

Special Instruction

Systems Operation

General Information
Machine Security System (MSS3i) Integrated

System Overview
Machine Security System (MSS3i) Integrated

Operation of Status Indicator
Machine Security System (MSS3i) Integrated

Key Information
Machine Security System (MSS3i) Integrated

Scheduled Access - "Security System Bypass Times"
Machine Security System (MSS3i) Integrated

Diagnostic Operation
Machine Security System (MSS3i) Integrated

Protected Functions
Machine Security System (MSS3i) Integrated

Service Operation Using Service Tool
Machine Security System (MSS3i) Integrated

Electronic Control Module (ECM)
Machine Security System (MSS3i) Integrated

System Components
Machine Security System (MSS3i) Integrated

Data Link
Machine Security System (MSS3i) Integrated

Normal Operation
Machine Security System (MSS3i) Integrated

Testing and Adjusting

General Information
Machine Security System (MSS3i) Integrated

Troubleshooting
Machine Security System (MSS3i) Integrated

Key - Program
Machine Security System (MSS3i) Integrated

Scheduled Access - Program - Security System Bypass
Machine Security System (MSS3i) Integrated

Time - Set
Machine Security System (MSS3i) Integrated

Factory Password - Obtain
Machine Security System (MSS3i) Integrated

Configuration
Machine Security System (MSS3i) Integrated

Machine Security System - Uninstall
Machine Security System (MSS3i) Integrated

Glossary of Terms
Machine Security System (MSS3i) Integrated

Service Magazine

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

CONTROL GP-GRADE

Operation and Maintenance Manual

Safety Messages
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

General Information
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Display Description
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Flashing Messages
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

System Components
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Grade Control Guidance Screen
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Grade Control Configuration
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Machine Monitoring System Configuration
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Startup
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Operator Controls
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

End User License Agreement
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Glossary
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Safety Messages
Cat Grade Control for 2D and 3D Excavators

General Information
Cat Grade Control for 2D and 3D Excavators

System Components
Cat Grade Control for 2D and 3D Excavators

Startup
Cat Grade Control for 2D and 3D Excavators

System Components Troubleshooting
Cat Grade Control for 2D and 3D Excavators

GNSS Systems Troubleshooting
Cat Grade Control for 2D and 3D Excavators

UTS Systems Troubleshooting
Cat Grade Control for 2D and 3D Excavators

2D Guidance Method
Cat Grade Control for 2D and 3D Excavators

Special Instruction

Instructions for Installing Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Instructions for Installing Rotary Position Sensor for Cat^® Grade Control on Certain Series E and Series F Excavators {5736, 7220}

Machine Guidance Upgrades For Cat® Grade Control Hydraulic Excavators {7220}
Machine Guidance Upgrades For Cat^® Grade Control Hydraulic Excavators {7220}

Installation Procedure for the 513-2945 Hydraulic Attachment Kit for Cat Grade With Assist on Certain 336F XE Excavators {1408, 7220, 7490, 7610, 7620}
Installation Procedure for the 513-2945 Hydraulic Attachment Kit for Cat Grade With Assist on Certain 336F XE Excavators {1408, 7220, 7490, 7610, 7620}

Procedure to Reimburse Software Enabled Attachment (SEA) {7220, 7490, 7601, 7603, 7610, 7620}
Procedure to Reimburse Software Enabled Attachment (SEA) {7220, 7490, 7601, 7603, 7610, 7620}

Technical Information Bulletin

SNM940 Radio CAN Connection to the Cat® Grade Control or AccuGrade System Could Cause Communication Failure with GNSS System {7220, 733T}
SNM940 Radio CAN Connection to the Cat^® Grade Control or AccuGrade System Could Cause Communication Failure with GNSS System {7220, 733T}

Systems Operation

General Information
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

System Components
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Guidance Terms
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Machine Dimensions
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

General Information
2D and 3D GRADE System for Hydraulic Excavators

System Components
2D and 3D GRADE System for Hydraulic Excavators

Display Firmware Upgrade
2D and 3D GRADE System for Hydraulic Excavators

Testing and Adjusting

Machine Dimensions - Configure
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

System - Set
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

System - Calibrate
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

System Accuracy - Test
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

System - Set
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

System Accuracy - Test
2D and 3D GRADE System for Hydraulic Excavators

ELECTRONICS GP-IMPLEMENT

Special Instruction

Adaptive Control System (ACS) Advanced Calibration Procedures {5051, 5063}
Adaptive Control System (ACS) Advanced Calibration Procedures {5051, 5063}

Service Magazine

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

ELECTRONICS GP-MACHINE

Engine News

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Operation and Maintenance Manual

Machine Security System - If Equipped
336F XE Excavator

Product Link - PL631 - If Equipped
Regulatory Compliance Information

Product Link - PL641 - If Equipped
Regulatory Compliance Information

Machine Security System - MSS3i and MSS S1 - If Equipped
Regulatory Compliance Information

General Information
Regulatory Compliance Information

Product Link - PL631V2 - If Equipped
Regulatory Compliance Information

Special Instruction

Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}

Installation Procedure for the 443-7976 Control Gp on Certain Hydraulic Excavators {1931, 7600}
Installation Procedure for the 443-7976 Control Gp on Certain Hydraulic Excavators {1931, 7600}

Procedure For Flashing Monitor Software on 300D2, 300E, and 300F Hydraulic Excavators with the 466-3565 Monitor{7610, 7620}
Procedure For Flashing Monitor Software on 300D2, 300E, and 300F Hydraulic Excavators with the 466-3565 Monitor{7610, 7620}

Adaptive Control System (ACS) Advanced Calibration Procedures {5051, 5063}
Adaptive Control System (ACS) Advanced Calibration Procedures {5051, 5063}

Procedure for Software Enabled Attachments (SEA) of Cat Production Measurement (CPM) Application on Certain Excavators {7610, 7620}
Procedure for Software Enabled Attachments (SEA) of Cat Production Measurement (CPM) Application on Certain Excavators {7610, 7620}

Technical Information Bulletin

Quick Coupler Installation Status{7610, 7620}
Quick Coupler Installation Status{7610, 7620}

Systems Operation

General Information
Machine Security System (MSS3i) Integrated

System Overview
Machine Security System (MSS3i) Integrated

Operation of Status Indicator
Machine Security System (MSS3i) Integrated

Key Information
Machine Security System (MSS3i) Integrated

Scheduled Access - "Security System Bypass Times"
Machine Security System (MSS3i) Integrated

Diagnostic Operation
Machine Security System (MSS3i) Integrated

Protected Functions
Machine Security System (MSS3i) Integrated

Service Operation Using Service Tool
Machine Security System (MSS3i) Integrated

Electronic Control Module (ECM)
Machine Security System (MSS3i) Integrated

System Components
Machine Security System (MSS3i) Integrated

Data Link
Machine Security System (MSS3i) Integrated

Normal Operation
Machine Security System (MSS3i) Integrated

Testing and Adjusting

General Information
Machine Security System (MSS3i) Integrated

Troubleshooting
Machine Security System (MSS3i) Integrated

Key - Program
Machine Security System (MSS3i) Integrated

Scheduled Access - Program - Security System Bypass
Machine Security System (MSS3i) Integrated

Time - Set
Machine Security System (MSS3i) Integrated

Factory Password - Obtain
Machine Security System (MSS3i) Integrated

Configuration
Machine Security System (MSS3i) Integrated

Machine Security System - Uninstall
Machine Security System (MSS3i) Integrated

Glossary of Terms
Machine Security System (MSS3i) Integrated

Troubleshooting

ECM Software - Install
336F Excavator

ECM - Configure
336F Excavator

ECM - Replace
336F Excavator

CAN Data Link - Test
336F Excavator

ECM Software - Install
2D and 3D GRADE System for Hydraulic Excavators

ECM - Configure
2D and 3D GRADE System for Hydraulic Excavators

ECM - Replace
2D and 3D GRADE System for Hydraulic Excavators

Service Magazine

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

New Machine Software and Cat Grade Control / Cat Production Measurement Software are Available for Certain 336F XE, 349F XE, and 352F XE Hydraulic Excavators {7610, 7620}
New Machine Software and Cat Grade Control / Cat Production Measurement Software are Available for Certain 336F XE, 349F XE, and 352F XE Hydraulic Excavators {7610, 7620}

New Implement Software Group Is Now Used on Certain 336D2 XE, 336E H and 336F XE Excavators {7490, 7601, 7610, 7620}
New Implement Software Group Is Now Used on Certain 336D2 XE, 336E H and 336F XE Excavators {7490, 7601, 7610, 7620}

A New Cat Production Measurement Auto Calibration Tool Is Now Available on Certain 336F XE, 349F XE, 352F XE, 374F and 390F Excavators {7610, 7620}
A New Cat Production Measurement Auto Calibration Tool Is Now Available on Certain 336F XE, 349F XE, 352F XE, 374F and 390F Excavators {7610, 7620}

New Machine Software Group Is Now Available for Certain Excavators {7610, 7620}
New Machine Software Group Is Now Available for Certain Excavators {7610, 7620}

New Cat Grade Control/Cat Production Measurement Software Is Now Available on Certain 336F XE, 349F XE, 352F XE, 374F and 390F Excavators {7610, 7620}
New Cat Grade Control/Cat Production Measurement Software Is Now Available on Certain 336F XE, 349F XE, 352F XE, 374F and 390F Excavators {7610, 7620}

New Machine Software Group Is Now Available on Certain 336F Excavators {7610, 7620}
New Machine Software Group Is Now Available on Certain 336F Excavators {7610, 7620}

New Monitor Software For TD520 GRADE Display and EC520 Controller is Now Available on Certain Hydraulic Excavators {7610, 7620}
New Monitor Software For TD520 GRADE Display and EC520 Controller is Now Available on Certain Hydraulic Excavators {7610, 7620}

New Cat® Production Measurement Software is Now Available on Certain 336F XE, 349F XE, 352F XE, 374F, and 390F Excavators {7610, 7620}
New Cat® Production Measurement Software is Now Available on Certain 336F XE, 349F XE, 352F XE, 374F, and 390F Excavators {7610, 7620}

CONTROL GP-SPEED

Systems Operation

Engine Control
336F XE Excavator Machine System

CONTROL GP-UNPROGRAMMED

Electronic Control Module
336F XE Excavator Machine System

Service Magazine

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

CONTROL GP-VOLTAGE

Disassembly and Assembly

Voltage Control (Load Protection) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Voltage Control (Load Protection) - Remove and Install
336F Excavator Engine Supplement

ELECTRICAL GP

Operation and Maintenance Manual

General Information
Regulatory Compliance Information

ELECTRONICS GP

Special Instruction

Cat® VIMS Converter Functionality {7610, 7620}
Cat^® VIMS Converter Functionality {7610, 7620}

2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat^® Products {1408}

Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}

Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}

Technical Information Bulletin

Cat Production Measurement Meter Values on VisionLink Report are Incorrect. {7620}
Cat Production Measurement Meter Values on VisionLink Report are Incorrect. {7620}

Troubleshooting

3D System Components - Test
2D and 3D GRADE System for Hydraulic Excavators

Service Magazine

"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24

Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02

New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat^® Product Link {7606, 7610, 7620}

New Software Is Now Used on Certain C9.3, C13, C15, and C18 Tier 4 Final Machine Engines {7620}
New Software Is Now Used on Certain C9.3, C13, C15, and C18 Tier 4 Final Machine Engines {7620}

New Software is Now Used on Certain C9.3 through C18 Tier 4 Final Machine Engines {1000, 108U, 7620}
New Software is Now Used on Certain C9.3 through C18 Tier 4 Final Machine Engines {1000, 108U, 7620}

A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}

A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}

Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat^® Products {1400}

IGNITION GP

Disassembly and Assembly

Ignition Coil - Remove and Install - Clean Emissions Module
336F Excavator Engine Supplement

Ignition Coil - Remove and Install
C9.3 Engines for Caterpillar Built Machines

LIGHTING GP

Operation and Maintenance Manual

High Intensity Discharge Lamp (HID) - Replace - If Equipped
336F XE Excavator

Specifications

Flood Lamp
336F XE Excavator Machine System Specifications

Flood Lighting - Boom
336F XE Excavator Machine System Specifications

Flood Lighting - Mass
336F XE Excavator Machine System Specifications

Flood Lamp
336F XE Excavator Machine System Specifications

Service Magazine

An Improved Halogen Lamp is Now Available for Certain Excavators {1434}
An Improved Halogen Lamp is Now Available for Certain Excavators {1434}

MOTOR GP

Troubleshooting

Engine Does Not Crank
C9.3 Tier 4 Final Engines

Aftertreatment Cooling Fan - Test
C9.3 Tier 4 Final Engines

Engine Overcrank Occurrence
C9.3 Tier 4 Final Engines

Engine Cranks but Does Not Start
C9.3 Tier 4 Final Engines

DEF Pump Motor - Test
C9.3 Tier 4 Final Engines

Disassembly and Assembly

Refrigerant Condenser and Mounting - Remove and Install
336F Excavator Engine Supplement

PANEL GP-CIRCUIT BREAKER

Operation and Maintenance Manual

Circuit Breakers - Reset
336F XE Excavator

Special Instruction

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Technical Information Bulletin

The Circuit Breaker Film on the Circuit Breaker Box May Be Incorrect on Certain E Series and F Series Excavators{1417}
The Circuit Breaker Film on the Circuit Breaker Box May Be Incorrect on Certain E Series and F Series Excavators{1417}

PANEL GP-FUSE

Special Instruction

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

SENSOR GP

Installation Procedure for the 354-4378 Pressure Sensor Group {1439, 5051}
Installation Procedure for the 354-4378 Pressure Sensor Group {1439, 5051}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

NOx Sensors Handling and Installation Procedures {191N}
NOx Sensors Handling and Installation Procedures {191N}

Machine Guidance Upgrades For Cat® Grade Control Hydraulic Excavators {7220}
Machine Guidance Upgrades For Cat^® Grade Control Hydraulic Excavators {7220}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 2566453 TEMPERATURE SENSORS ON CERTAIN 336D, 336F, 340D, AND 340F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 2566453 TEMPERATURE SENSORS ON CERTAIN 336D, 336F, 340D, AND 340F EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE SETTING FOR CAT GRADE CONTROL ON CERTAIN 336F AND 349F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SETTING FOR CAT GRADE CONTROL ON CERTAIN 336F AND 349F EXCAVATORS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}

Specifications

Coolant Temperature Sensor
C9.3 Tier 4 Final Engines

Engine Oil Pressure Sensor
C9.3 Tier 4 Final Engines

Inlet Manifold Air Pressure Sensor
C9.3 Tier 4 Final Engines

Atmospheric Pressure Sensor
C9.3 Tier 4 Final Engines

Engine Oil Pressure Sensor
C9.3 Tier 4 Final Engines

Coolant Temperature Sensor
C9.3 Tier 4 Final Engines

Atmospheric Pressure Sensor
C9.3 Tier 4 Final Engines

Inlet Manifold Temperature Sensor
C9.3 Tier 4 Final Engines

Inlet Manifold Air Pressure Sensor
C9.3 Tier 4 Final Engines

Speed/Timing Sensor
C9.3 Tier 4 Final Engines

Coolant Temperature Sensor
C9.3 Tier 4 Final Engines

Inlet Air Temperature Sensor
C9.3 Tier 4 Final Engines

Speed/Timing Sensor
C9.3 Tier 4 Final Engines

Coolant Temperature Sensor
C9.3 Tier 4 Final Engines

Speed/Timing Sensor
C9.3 Tier 4 Final Engines

Atmospheric Pressure Sensor
C9.3 Tier 4 Final Engines

Crankcase Pressure Sensor
C9.3 Tier 4 Final Engines

Pressure Sensor (DPF Inlet)
C9.3 Tier 4 Final Engines

Pressure Sensor (ARD Combustion Air)
C9.3 Tier 4 Final Engines

Temperature Sensor (DPF Inlet, Flame Detect)
C9.3 Tier 4 Final Engines

Speed/Timing Sensor
C9.3 Tier 4 Final Engines

Inlet Manifold Temperature Sensor - Charge Air Cooler Outlet
C9.3 Tier 4 Final Engines

Temperature Sensor (NOx Reduction System)
C9.3 Tier 4 Final Engines

Speed/Timing Sensor
C9.3 Tier 4 Final Engines

Inlet Manifold Air Pressure Sensor
C9.3 Tier 4 Final Engines

Pressure Sensor (NOx Reduction System)
C9.3 Tier 4 Final Engines

Temperature Sensor (NOx Reduction System)
C9.3 Tier 4 Final Engines

Engine Oil Pressure Sensor
C9.3 Tier 4 Final Engines

Speed/Timing Sensor
C9.3 Tier 4 Final Engines

Inlet Manifold Air Pressure Sensor
C9.3 Tier 4 Final Engines

Inlet Manifold Temperature Sensor
C9.3 Tier 4 Final Engines

Engine Oil Pressure Sensor
C9.3 Tier 4 Final Engines

Inlet Air Temperature Sensor
C9.3 Tier 4 Final Engines

Speed/Timing Sensor
C9.3 Tier 4 Final Engines

Inlet Manifold Temperature Sensor
C9.3 Tier 4 Final Engines

Pressure Sensor (NRS Differential)
C9.3 Tier 4 Final Engines

Temperature Sensor (DPF Inlet, Flame Detect)
C9.3 Tier 4 Final Engines

Inlet Manifold Air Pressure Sensor
C9.3 Tier 4 Final Engines

Nitrogen Oxide Sensor - Engine Exhaust Out
C9.3 Tier 4 Final Engines

Nitrogen Oxide Sensor - Exhaust Pipe Out
C9.3 Tier 4 Final Engines

Nitrogen Oxide Sensor
C9.3 Tier 4 Final Engines

Inlet Manifold Air Pressure Sensor
C9.3 Tier 4 Final Engines

Pressure Sensor - Accumulator
336F XE Excavator Machine System Specifications

Pressure Sensor - BOOM DOWN
336F XE Excavator Machine System Specifications

Position Sensor (Boom)
336F XE Excavator Machine System Specifications

Position Sensor and Mounting
336F XE Excavator Machine System Specifications

Inlet Manifold Temperature Sensor
C9.3 Tier 4 Final Engines

Nitrogen Oxide Sensor
C9.3 Tier 4 Final Engines

Tool Operating Manual

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

Service Letter-Asia

Systems Operation

Sensors
336D2 XE, 336E H and 336F XE Excavators Tool Control System

Reuse And Salvage Guidelines

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Service Letter-APD

Troubleshooting

Coolant Level - Test
C9.3 Tier 4 Final Engines

Sensor Calibration Required - Test
C9.3 Tier 4 Final Engines

Sensor Signal (Analog, Passive) - Test
C9.3 Tier 4 Final Engines

Sensor Supply - Test
C9.3 Tier 4 Final Engines

Sensor (Data Link Type) - Test
C9.3 Tier 4 Final Engines

Speed/Timing - Test
C9.3 Tier 4 Final Engines

Sensor Signal (Analog, Active) - Test
C9.3 Tier 4 Final Engines

NOx Sensor - Test
C9.3 Tier 4 Final Engines

DEF Pump Pressure Sensor - Test
C9.3 Tier 4 Final Engines

DEF Pump Sensor Supply - Test
C9.3 Tier 4 Final Engines

NOx Conversion Is Low
C9.3 Tier 4 Final Engines

SCR Catalyst Inlet Temperature Sensor - Test
C9.3 Tier 4 Final Engines

Cooling Fan Speed - Test
C9.3 Tier 4 Final Engines

Water in Fuel - Test
C9.3 Tier 4 Final Engines

Pressure Sensor (Swing) - Functional Test
336F Excavator

Sensor Signal (Analog, Passive) - Test
336F Excavator

Sensor Signal (PWM) - Test
336F Excavator

Sensor Supply - Test
336F Excavator

Sensor (Data Link Type) - Test
336F Excavator

Sensor (Data Link Type) - Test
2D and 3D GRADE System for Hydraulic Excavators

Sensor Signal (PWM) - Test
2D and 3D GRADE System for Hydraulic Excavators

Timing - Calibrate
C9.3 Tier 4 Final Engines

Disassembly and Assembly

Fuel Pressure Sensor - Remove and Install - Rail
C9.3 Engines for Caterpillar Built Machines

Engine Oil Pressure Sensor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Inlet Manifold Pressure Sensor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Coolant Temperature Sensor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Crankcase Pressure Sensor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Inlet Manifold Temperature Sensor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Flame Detection Temperature Sensor - Remove and Install - Clean Emissions Module
336F Excavator Engine Supplement

Atmospheric Pressure Sensor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Pressure Sensor (DPF) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Temperature Sensor (Catalyst Inlet) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Pressure Sensor (ARD Combustion Air) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Speed/Timing Sensor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Nitrogen Oxide Sensor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Pressure Sensor (NRS Absolute) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Pressure Sensor (NRS Differential) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Temperature Sensor (DPF) - Remove and Install
336F Excavator Engine Supplement

Pressure Sensor (ARD Combustion Air) - Remove and Install
336F Excavator Engine Supplement

Pressure Sensor (DPF) - Remove and Install
336F Excavator Engine Supplement

Nitrogen Oxide Sensor - Remove and Install
336F Excavator Engine Supplement

Position Sensor and Mounting (Bucket) - Remove and Install
336F Excavator Machine Systems

Service Magazine

A Torque Specification Prevents Damage to the Liquid Level Sensor Gp {7422}
2015/08/19

Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}
Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}

SOLENOID GP

Specifications

Exhaust Gas Valve (NRS)
C9.3 Tier 4 Final Engines

Troubleshooting

Cooling Fan Control - Test
C9.3 Tier 4 Final Engines

Injector Solenoid - Test
C9.3 Tier 4 Final Engines

Cooling Fan Reversing - Test
C9.3 Tier 4 Final Engines

Disassembly and Assembly

Solenoid Valve (ARD Fuel) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Solenoid Valve (DEF Heater Coolant) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Solenoid Valve (ARD Main Fuel) - Remove and Install - Clean Emissions Manifold
336F Excavator Engine Supplement

Solenoid Valve (DEF Heater Coolant) - Remove and Install
336F Excavator Engine Supplement

STARTING AID GP

Operation and Maintenance Manual

Ether Starting Aid Cylinder - Replace - If Equipped
336F XE Excavator

Engine Starting
336F XE Excavator

Specifications

Ether Starting Aid
336F XE Excavator Machine System Specifications

STARTING MOTOR GP

Special Instruction

Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}

Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}

Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}

Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}

Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}

Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat^® Products {1453}

Specifications

Electric Starting Motor
C9.3 Tier 4 Final Engines

Testing and Adjusting

Electric Starting System - Test
C9.3 Tier 4 Final Engines

Pinion Clearance - Adjust
C9.3 Tier 4 Final Engines

Disassembly and Assembly

Electric Starting Motor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Electric Starting Motor - Remove and Install
336F Excavator Engine Supplement

SWITCH GP

Operation and Maintenance Manual

Battery Disconnect Switch
336F XE Excavator

Special Instruction

Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines

Switches
336D2 XE, 336E H and 336F XE Excavators Tool Control System

Troubleshooting

Coolant Level - Test
C9.3 Tier 4 Final Engines

Cooling Fan Control - Test
C9.3 Tier 4 Final Engines

Speed Control - Test
C9.3 Tier 4 Final Engines

Shutdown (Ground Level) - Test
C9.3 Tier 4 Final Engines

Relay - Test
336F Excavator

Window Wiper Delay - Test
336F Excavator

Switch Circuits - Test
336F Excavator

Switch Circuits - Test
C9.3 Tier 4 Final Engines

Service Magazine

Improved Start Switch Assembly is Now Used on Certain Cat® Products {1416}
Improved Start Switch Assembly is Now Used on Certain Cat^® Products {1416}

TOOLS

Tool Operating Manual

NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}

NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}

M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}

Systems Operation

Service Operation Using Service Tool
Machine Security System (MSS3i) Integrated

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Troubleshooting

Electronic Service Tools
C9.3 Tier 4 Final Engines

Cat ET Service Features
C9.3 Tier 4 Final Engines

Customer Passwords
C9.3 Tier 4 Final Engines

Factory Passwords
C9.3 Tier 4 Final Engines

ECM Will Not Accept Factory Passwords
C9.3 Tier 4 Final Engines

Test ECM Mode
C9.3 Tier 4 Final Engines

Cat ET Service Error Identifiers
C9.3 Tier 4 Final Engines

Electronic Service Tool Does Not Communicate
C9.3 Tier 4 Final Engines

Service Tools
336F Excavator

Service Tools
2D and 3D GRADE System for Hydraulic Excavators

Service Magazine

Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11

A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

VALVE GP

Specifications

Exhaust Gas Valve (NRS)
C9.3 Tier 4 Final Engines

Troubleshooting

Solenoid Valve - Test
C9.3 Tier 4 Final Engines

Disassembly and Assembly

Solenoid Valve (ARD Fuel) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Solenoid Valve (DEF Heater Coolant) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Solenoid Valve (ARD Main Fuel) - Remove and Install - Clean Emissions Manifold
336F Excavator Engine Supplement

Solenoid Valve (DEF Heater Coolant) - Remove and Install
336F Excavator Engine Supplement

WARNING GP

Testing and Adjusting

Overload Warning - Set - If Equipped
336F XE Excavator Machine System

Troubleshooting

Alarm - Test
336F Excavator

WIRING GP

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
336F XE Excavator

Battery - Recycle
336F XE Excavator

SmartBoom Operation - If Equipped
336F XE Excavator

SmartBoom Control - If Equipped
336F XE Excavator

Power Receptacle - If Equipped
336F XE Excavator

Battery Disconnect Switch
336F XE Excavator

Fuses - Replace
336F XE Excavator

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Installation of the 336-6360 Cab Wiring Gp {1408}
Installation of the 336-6360 Cab Wiring Gp {1408}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for 324-5789 Medium Pressure Wiring on Certain Hydraulic Excavators{1408}
Installation Procedure for 324-5789 Medium Pressure Wiring on Certain Hydraulic Excavators{1408}

Installation Procedure for the 443-7977 Valve Wiring Gp on Certain Hydraulic Excavators{1408, 5734}
Installation Procedure for the 443-7977 Valve Wiring Gp on Certain Hydraulic Excavators{1408, 5734}

Installation Procedure for the 377-8217 Valve Wiring Gp on Certain Hydraulic Excavators{1408, 7301}
Installation Procedure for the 377-8217 Valve Wiring Gp on Certain Hydraulic Excavators{1408, 7301}

Installation Procedure for the 377-8219 Medium Pressure Wiring on Certain Hydraulic Excavators{1408}
Installation Procedure for the 377-8219 Medium Pressure Wiring on Certain Hydraulic Excavators{1408}

Installation Procedure for the 441-0108 Control Ar - Medium Pressure {1408, 5051, 5057, 5059, 5070, 5073, 7405}
Installation Procedure for the 441-0108 Control Ar - Medium Pressure {1408, 5051, 5057, 5059, 5070, 5073, 7405}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Installation Procedure for 377-8180 Chassis Wiring Gp of Certain Hydraulic Excavators{1408}
Installation Procedure for 377-8180 Chassis Wiring Gp of Certain Hydraulic Excavators{1408}

Installation Procedure for the 456-4115 Auxiliary Control Ar (Tool Control) on Certain 336F Hydraulic Excavators {1408, 5051, 5057, 5705, 7301, 7405, 7557}
Installation Procedure for the 456-4115 Auxiliary Control Ar (Tool Control) on Certain 336F Hydraulic Excavators {1408, 5051, 5057, 5705, 7301, 7405, 7557}

Installation Procedure for the 444-3856 Wiring Gp - Chassis on Certain 336F Hydraulic Excavators{1408}
Installation Procedure for the 452-7035 Wiring Gp - Chassis on Certain Hydraulic Excavators{1408}

Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}

Procedure to Install Additional Cameras on Series F Excavators {1408, 7301, 7348}
Procedure to Install Additional Cameras on Series F Excavators {1408, 7301, 7348}

GRADE System Calibration and Measure-Up Procedure for the 2D and 3D on Excavators {1408, 7220}
GRADE System Calibration and Measure-Up Procedure for the 2D and 3D on Excavators {1408, 7220}

Specifications

Electronic Unit Injector Wiring
C9.3 Tier 4 Final Engines

Radio (AM/FM)
336F XE Excavator Machine System Specifications

Tool Operating Manual

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines

Switches
336D2 XE, 336E H and 336F XE Excavators Tool Control System

Sensors
336D2 XE, 336E H and 336F XE Excavators Tool Control System

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C9.3 Tier 4 Final Engines

Connector Contact Description
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Overload Warning - Set - If Equipped
336F XE Excavator Machine System

System Schematic
336F XE, 349F XE, 352F XE, 374F and 390F Excavators Cat^® Production Measurement Application

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

Electrical Connectors
C9.3 Tier 4 Final Engines

Electrical Connectors - Inspect
C9.3 Tier 4 Final Engines

ARD Ignition - Test
C9.3 Tier 4 Final Engines

Electrical Connector - Inspect
336F Excavator

Connector Locations
336F Excavator

Wiring Harness (Open Circuit) - Test
336F Excavator

Wiring Harness (Short Circuit) - Test
336F Excavator

System Schematic
336F Excavator

Connector Contact Description
336F Excavator

Connector Locations
2D and 3D GRADE System for Hydraulic Excavators

CAN Data Link - Test
2D and 3D GRADE System for Hydraulic Excavators

Electrical Connector - Inspect
2D and 3D GRADE System for Hydraulic Excavators

Wiring Harness (Open Circuit) - Test
2D and 3D GRADE System for Hydraulic Excavators

Wiring Harness (Short Circuit) - Test
2D and 3D GRADE System for Hydraulic Excavators

Disassembly and Assembly

Inlet Manifold Pressure Sensor - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Nozzle Heater Harness - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

Pressure Sensor (ARD Combustion Air) - Remove and Install
336F Excavator Engine Supplement

Service Magazine

Rework Procedure is Available to Replace a Cab Harness Connector to Match the Harness Connector of a Field Installed Product Link Kit on Certain E Series and F Series Excavators {1408, 7301}
2014/11/17

A New Special Instruction is Available for Troubleshooting the Upper Window Wiper Relay Circuit on Certain 311D-349D, E Series, and F Series Excavators {1408, 7305}
2015/08/07

New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}

New Steel Cable Straps are Now Used on Certain Tier 4 Final Engines {1408, 1900}
New Steel Cable Straps are Now Used on Certain Tier 4 Final Engines {1408, 1900}

Updated Instructions for GRADE System Calibration and Measure-Up Procedure Are Now Used on Certain Excavators {7220}
Updated Instructions for GRADE System Calibration and Measure-Up Procedure Are Now Used on Certain Excavators {7220}

CONNECTION GP

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}

New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553}
New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553}

RELAY GP

Specifications

Relay (ARD Nozzle Heater)
C9.3 Tier 4 Final Engines

Systems Operation

Air Conditioning and Heating System Relay Operation
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Heating

Disassembly and Assembly

Relay (ARD Nozzle Heater) - Remove and Install - Clean Emissions Module
336F Excavator Engine Supplement

Relay (ARD Nozzle Heater) - Remove and Install
C9.3 Engines for Caterpillar Built Machines

ELECTRONICS GP-MONITOR

Engine News

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Operation and Maintenance Manual

Monitoring System
336F XE Excavator

Production Measurement Application
336F XE Excavator

Production Measurement - Calibrate - Bucket Zero Adjustment
336F XE Excavator

Production Measurement - Calibrate - Boom Single Operation and Front Multi Operation
336F XE Excavator

Monitoring System - Monitor with Installed Cat Grade With Assist
336F XE Excavator

General Information
Regulatory Compliance Information

Special Instruction

Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}

Installation Of Operator ID System on Cat® and Non-Cat Products {7600, 7610, 7620}
Installation Of Operator ID System on Cat^® and Non-Cat Products {7600, 7610, 7620}

Cat® VIMS Converter Functionality {7610, 7620}
Cat^® VIMS Converter Functionality {7610, 7620}

Procedure to Access and Configure Functions on TD520 Cat® GRADE Display {7347, 7490, 7601, 7603, 7610, 7620}
Procedure to Access and Configure Functions on TD520 Cat^® GRADE Display {7347, 7490, 7601, 7603, 7610, 7620}

Procedure to Reimburse Software Enabled Attachment (SEA) {7220, 7490, 7601, 7603, 7610, 7620}
Procedure to Reimburse Software Enabled Attachment (SEA) {7220, 7490, 7601, 7603, 7610, 7620}

Technical Information Bulletin

Cat Production Measurement Meter Values on VisionLink Report are Incorrect. {7620}
Cat Production Measurement Meter Values on VisionLink Report are Incorrect. {7620}

Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}

Systems Operation

General Information
F Series Excavator Monitoring System

Input Components
F Series Excavator Monitoring System

Warning Operation
F Series Excavator Monitoring System

Password Entry
F Series Excavator Monitoring System

Data Link
F Series Excavator Monitoring System

Menu Outline
F Series Excavator Monitoring System

Display Setting Menu
F Series Excavator Monitoring System

Language Select Menu
F Series Excavator Monitoring System

Performance Menu
F Series Excavator Monitoring System

Power Mode Setting Menu
F Series Excavator Monitoring System

Maintenance Intervals Menu
F Series Excavator Monitoring System

Work Tool Select Menu
F Series Excavator Monitoring System

Current Totals Menu
F Series Excavator Monitoring System

Engine Shutdown Setting Menu
F Series Excavator Monitoring System

Password Change Menu
F Series Excavator Monitoring System

Controls Setup Menu - If Equipped
F Series Excavator Monitoring System

Reverse Fan Setting Menu - If Equipped
F Series Excavator Monitoring System

Service Menu
F Series Excavator Monitoring System

ECM Summary Menu
F Series Excavator Monitoring System

Diagnostic Menu
F Series Excavator Monitoring System

Status Menu
F Series Excavator Monitoring System

Configuration Menu
F Series Excavator Monitoring System

Tool Programming Menu
F Series Excavator Monitoring System

Override Parameters Menu
F Series Excavator Monitoring System

Calibration Menu
F Series Excavator Monitoring System

Device Test Menu
F Series Excavator Monitoring System

WinFlash Menu
F Series Excavator Monitoring System

Prestart Monitoring Function - If Equipped
F Series Excavator Monitoring System

Display Module
336F XE, 349F XE, 352F XE, 374F and 390F Excavators Cat^® Production Measurement Application

Menu Navigation
336F XE, 349F XE, 352F XE, 374F and 390F Excavators Cat^® Production Measurement Application

Normal Weighing Operation
336F XE, 349F XE, 352F XE, 374F and 390F Excavators Cat^® Production Measurement Application

Reweigh Operation
336F XE, 349F XE, 352F XE, 374F and 390F Excavators Cat^® Production Measurement Application

Zero Operation
336F XE, 349F XE, 352F XE, 374F and 390F Excavators Cat^® Production Measurement Application

General Information
336F XE, 349F XE, 352F XE, 374F and 390F Excavators Cat^® Production Measurement Application

Data Link
336F XE, 349F XE, 352F XE, 374F and 390F Excavators Cat^® Production Measurement Application

Input Components
336F XE, 349F XE, 352F XE, 374F and 390F Excavators Cat^® Production Measurement Application

Payload Measurement
336F XE, 349F XE, 352F XE, 374F and 390F Excavators Cat^® Production Measurement Application

Sound Setup
336F XE, 349F XE, 352F XE, 374F and 390F Excavators Cat^® Production Measurement Application

Site Configuration
336F XE, 349F XE, 352F XE, 374F and 390F Excavators Cat^® Production Measurement Application

Required Settings
336F XE, 349F XE, 352F XE, 374F and 390F Excavators Cat^® Production Measurement Application

Features
2D and 3D GRADE System for Hydraulic Excavators

Testing and Adjusting

Bucket Measure-Up
336F XE, 349F XE, 352F XE, 374F and 390F Excavators Cat^® Production Measurement Application

Calibration
336F XE, 349F XE, 352F XE, 374F and 390F Excavators Cat^® Production Measurement Application

Troubleshooting
336F XE, 349F XE, 352F XE, 374F and 390F Excavators Cat^® Production Measurement Application

Operational Checks
336F XE, 349F XE, 352F XE, 374F and 390F Excavators Cat^® Production Measurement Application

Calibration
2D and 3D GRADE System for Hydraulic Excavators

Troubleshooting

3D System Components - Test
2D and 3D GRADE System for Hydraulic Excavators

Service Magazine

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

New Inspection and Repair Procedure Is Now Available for Cat® Products Located in India Equipped with Product Link {7606}
2014/09/22

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

New Phone Number for VIMS Support Is Now Available for All Cat® Products Equipped with VIMS {7601}
2015/03/02

New Software Is Now Available for All Cat® Products With PL522 China System {7606, 7620}
2015/03/04

New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12

New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat^® Product Link {7606, 7610, 7620}

HEATER GP

Operation and Maintenance Manual

Engine Starting
336F XE Excavator

ELECTRONICS GP-WORK TOOL

Special Instruction

Technical Information Bulletin

Quick Coupler Installation Status{7610, 7620}
Quick Coupler Installation Status{7610, 7620}

Service Magazine

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

ELECTRONICS GP-COMMUNICATION

Engine News

A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}

Operation and Maintenance Manual

Product Link
336F XE Excavator

Product Link - Product Link Japan
336F XE Excavator

Product Link - PL631 - If Equipped
Regulatory Compliance Information

Product Link - PL641 - If Equipped
Regulatory Compliance Information

Wireless Device - EC520 - If Equipped
Regulatory Compliance Information

Wireless Device - TD520 - If Equipped
Regulatory Compliance Information

Wireless Device - MS995, MS975, MS955 Receiver - If Equipped
Regulatory Compliance Information

General Information
Regulatory Compliance Information

Product Link - PL631V2 - If Equipped
Regulatory Compliance Information

Special Instruction

Installation Guide for Product Link PL121SR and PL321{7606}
Installation Guide for Product Link PL121SR and PL321{7606}

Installation Procedure for Product Link PL522 and PL523 (Cellular) {7606}
Installation Procedure for Product Link PL522 and PL523 (Cellular) {7606}

Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620}
Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620}

Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606}
Installation of Remote Disable Module (RDM) Kit on Cat^® and Non-Cat Equipment {7606}

Technical Information Bulletin

Invalid Product Link Status Information is Displayed on the Monitors of Certain E Series and F Series Excavators {7602, 7606, 7610, 7620}
Invalid Product Link Status Information is Displayed on the Monitors of Certain E Series and F Series Excavators {7602, 7606, 7610, 7620}

Troubleshooting

3D System Components - Test
2D and 3D GRADE System for Hydraulic Excavators

Service Magazine

Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}
2015/09/15

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

New Software Is Now Available for All Cat® Products With The Product Link PL421 or Product Link PL420 System {7606, 7620}
2014/12/10

New Software for Product Link PL522 Module Is Now Available for All Cat® Products {7606}
2014/08/08

Troubleshooting SIM Cards on Certain Product Link 522 and 523 for all Cat Products {7606}
2015/02/17

Loss of Daily Reports May Be an Indicator of End of Life for the Product Link® ECM on PL321SR and PL321VSR Systems {7606}
2014/08/13

Capturing Engine Stop Messages and Idle Information on All Caterpillar Products Equipped with Product Link 522 {7606}
2014/07/25

Service Meter Adjustment Is Now Available in VisionLinkTM {7478, 7606}
2014/08/20

New Inspection and Repair Procedure Is Now Available for Cat® Products Located in India Equipped with Product Link {7606}
2014/09/22

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24

Revision to "Reports and Messages Not Available" Troubleshooting Procedure for Cat® Products with Cat® Product Link 121/321 {7606}
2014/12/24

Event Codes (E2131, E2132, or E2133) Appearing Occasionally with On-board Machine Systems with a PL321, or PL121 Satellite System Installed {7600, 7606}
2015/01/06

Procedure to Improve Reporting into VisionLink after Re-Registration of Product Link Systems PL121/321 {7606}
2015/03/17

New Software Is Now Available for All Cat® Products With PL522 China System {7606, 7620}
2015/03/04

New Software for Product Link PL522 Module Is Now Available for All Cat® Products {7606, 7620}
2015/06/26

New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12

Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02

New Product Link Software for PL300 Is Now Available for All Cat® Products {7606, 7620}
2015/09/11

CAMERA GP

Operation and Maintenance Manual

Camera
336F XE Excavator

Camera - Clean - If Equipped
336F XE Excavator

Special Instruction

Procedure to Install Additional Cameras on Series F Excavators {1408, 7301, 7348}
Procedure to Install Additional Cameras on Series F Excavators {1408, 7301, 7348}

Technical Information Bulletin

Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}

ELECTRONICS GP-GENERATOR SET

Special Instruction

Service Magazine

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

METER GP-SERVICE

Service Meter Adjustment Is Now Available in VisionLinkTM {7478, 7606}
2014/08/20

RECEIVER GP

Specifications

Laser Receiver
336F XE Excavator Machine System Specifications

ANTENNA GP

Antenna
336F XE Excavator Machine System Specifications

RADIO GP

Technical Information Bulletin

HARNESS GP

Special Instruction

Procedure to Install Additional Cameras on Series F Excavators {1408, 7301, 7348}
Procedure to Install Additional Cameras on Series F Excavators {1408, 7301, 7348}

Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat® Products Equipped with BR Series Connectors {1408}
Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat^® Products Equipped with BR Series Connectors {1408}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Tool Operating Manual

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Magazine