AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

234-5013 SENSOR GP-TEMPERATURE S/N T4F5196-UP PART OF 343-8126 BASE GP-FUEL FILTER, 418-9617 SENSOR GP-ENGINE 349F


ELECTRICAL AND STARTING SYSTEM
SENSOR GP
STARTING AID GP
STARTING MOTOR GP
SWITCH GP

EXCAVATOR 349F EXCAVATOR HLB
 349F & 349F L Excavators HLB00001-UP (MACHINE) POWERED BY C13 Engine M0070902 349F HLB   (2013)

ELECTRICAL AND STARTING SYSTEM

SENSOR GP
SENSOR GP-SPEED
384-1836 SENSOR GP-SPEED
SENSOR GP-TEMPERATURE
234-5012 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
234-5013 SENSOR GP-TEMPERATURE
GUARD GP-SENSOR
327-7474 GUARD GP-SENSOR
 

#M00709020410
 

234-5013: SENSOR GP-TEMPERATURE

234-5013 SENSOR GP-TEMPERATURE
S/N T4F5196-UP
PART OF 343-8126 BASE GP-FUEL FILTER, 418-9617 SENSOR GP-ENGINE
i02634117 M0070902
2345013 SENSOR GP-TEMPERATURE Parts scheme
  For full view, you need register

Parts for your 349F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 256-6453 [1] SENSOR-TEMPERATURE (2-PIN)  
2. 238-5080 [1] SEAL-O-RING  
 

#M00709020411
 

324-4364: STARTING AID GP-ETHER

324-4364 STARTING AID GP-ETHER
S/N HLB1-UP; TEW1-UP
PART OF 500-0696, 500-0697, 505-4691, 505-4692, 509-7750, 509-7751, 517-1606, 517-1607 DISTRIBUTION AR, 445-2104 OPTION AR-REGIONAL
i04285693 M0070902
3244364 STARTING AID GP-ETHER Parts scheme
  For full view, you need register

Parts for your 349F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
2. 7N-2059 [1] CLAMP AS (CYLINDER)  
3. 230-0917 [1] FITTING AS  
  236-4545 [1] NUT-SLEEVE (5/16-24-THD)  
4. 239-1134 Y [1] VALVE GP-ETHER STARTING (24-VOLT)  
5. 351-3838 [1] PLATE AS  
6. 352-0399 [1] ATOMIZER GP-ETHER  
  236-4545 [1] NUT-SLEEVE (5/16-24-THD)  
7. 4P-7581 [1] CLIP (LADDER)  
8. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
9. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
10. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
11. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
12. 174-9169 E TUBE (73-CM)  
   
  7N-0296 AF [1] CYLINDER AS-ETHER  
    (MUST BE PROCURED LOCALLY FROM YOUR CAT DEALER)
  A   NOT PART OF THIS GROUP
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00709020412
 

349-6519: STARTING MOTOR GP-ELECTRIC

349-6519 STARTING MOTOR GP-ELECTRIC
S/N T4F5196-UP
24-VOLT
PART OF 352-8869 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@349-6530@@@@@
i04292125 M0070902
3496519 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 349F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
14. 3L-3380 [1] BUSHING-TERMINAL  
15. 8C-3089 [1] SEAL-O-RING  
16. 4M-1853 [1] LEVER AS-SHIFT  
17. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
18. 7L-2894 [4] GASKET  
19. 4M-1831 [4] PLUG-LEVER HOUSING  
20. 4M-1854 [1] SHAFT-LEVER  
21. 1H-1023 [1] SEAL-O-RING  
22. 2D-6392 [1] SEAL-O-RING  
23. 7T-3974 [1] HOUSING AS-DRIVE  
24. 6N-3826 [1] DRIVE AS-MOTOR  
25. 2H-3429 [1] RING-RETAINING  
26. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
27. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
28. 6N-3279 [1] INSULATOR  
29. 0S-1597 [13] BOLT (1/4-28X1-IN)  
30. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
31. 1H-2629 [3] STRIP-INSULATION  
32. 7M-0324 [1] COIL AS-FIELD  
33. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
34. 7F-3488 [6] SHOE-POLE  
35. 7M-8651 [1] ARMATURE AS  
36. 7M-0325 [1] INSULATOR  
37. 3T-9524 [6] BRUSH AS  
38. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHER)
40. 3R-8801 [1] CLAMP  
41. 8F-1434 [2] LOCKWASHER  
42. 6V-8188 [6] NUT (1/2-13-THD)  
43. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
44. 4B-2049 [6] NUT (10-32-THD)  
45. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
46. 3T-9494 [6] SPRING  
47. 349-6255 [1] HOUSING AS  
48. 9G-4101 [1] BUSHING-END  
49. 3T-3424 [3] PLUG-FELT  
50. 3T-3423 [3] CUP  
51. 1M-9968 [1] BUSHING  
52. 2F-6678 [1] SEAL-LIP TYPE  
53. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
54. 4M-1896 [1] BUSHING-TERMINAL  
55. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
56. 125-6535 [1] COVER-STARTING MOTOR  
57. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
58. 352-7994 [1] KIT-SWITCH (RELAY, STARTER)  
    (INCLUDES SWITCH AS, COVER, BOLT, ANCHOR, & CLAMP)
  Y   SEPARATE ILLUSTRATION
 

#M00709020413
 

349-6530: STARTING MOTOR GP-ELECTRIC

349-6530 STARTING MOTOR GP-ELECTRIC
S/N HLB1-UP; TEW1-UP
24-VOLT
FIELD REPLACEMENT FOR @@@@@349-6519@@@@@
i04388418 M0070902
3496530 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 349F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
14. 3L-3380 [1] BUSHING-TERMINAL  
15. 8C-3089 [1] SEAL-O-RING  
16. 4M-1853 [1] LEVER AS-SHIFT  
17. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
18. 7L-2894 [4] GASKET  
19. 4M-1831 [4] PLUG-LEVER HOUSING  
20. 4M-1854 [1] SHAFT-LEVER  
21. 1H-1023 [1] SEAL-O-RING  
22. 2D-6392 [1] SEAL-O-RING  
23. 7T-3974 [1] HOUSING AS-DRIVE  
24. 6N-3826 [1] DRIVE AS-MOTOR  
25. 2H-3429 [1] RING-RETAINING  
26. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
27. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
28. 6N-3279 [1] INSULATOR  
29. 0S-1597 [13] BOLT (1/4-28X1-IN)  
30. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
31. 1H-2629 [3] STRIP-INSULATION  
32. 7M-0324 [1] COIL AS-FIELD  
33. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
34. 7F-3488 [6] SHOE-POLE  
35. 7M-8651 [1] ARMATURE AS  
36. 7M-0325 [1] INSULATOR  
37. 3T-9524 [6] BRUSH AS  
38. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
39. 125-6537 [1] INSULATOR  
40. 3R-8801 [1] CLAMP  
41. 8F-1434 [2] LOCKWASHER  
42. 6V-8188 [6] NUT (1/2-13-THD)  
43. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
44. 4B-2049 [6] NUT (10-32-THD)  
45. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
46. 3T-9494 [6] SPRING  
47. 349-6255 [1] HOUSING AS  
48. 9G-4101 [1] BUSHING-END  
49. 3T-3424 [3] PLUG-FELT  
50. 3T-3423 [3] CUP  
51. 1M-9968 [1] BUSHING  
52. 2F-6678 [1] SEAL-LIP TYPE  
53. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
54. 4M-1896 [1] BUSHING-TERMINAL  
55. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
56. 125-6535 [1] COVER-STARTING MOTOR  
57. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
58. 352-7994 [1] KIT-SWITCH (RELAY, STARTER)  
    (KIT INCLUDES STARTER RELAY SWITCH AS, JUMP START PROTECTION COVER, BOLTS, ANCHOR & CLAMP)
59. 3T-3434 [6] PLUG  
  Y   SEPARATE ILLUSTRATION
 

#M00709020414
 

352-8869: STARTING MOTOR GP-ELECTRIC

352-8869 STARTING MOTOR GP-ELECTRIC
S/N T4F5196-UP
24-VOLT
PART OF 476-6375, 516-8126 ENGINE AR-COMPLETE
i04292123 M0070902
3528869 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 349F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6089 [1] GASKET  
2. 306-8156 [1] STRAP AS-GROUND  
3. 8S-2332 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
4. 349-6519 Y [1] STARTING MOTOR GP-ELECTRIC  
5. 366-2534 [1] HARNESS AS-WIRING  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  278-8844 [1] PLUG AS-CONNECTOR  
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  264-7029 [1] SEAL-CONNECTOR  
  8T-8737 [2] PLUG-SEAL  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
  289-5150 E SLEEVE (13-CM)  
  5P-1476 [2] TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW)  
6. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
7. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#M00709020415
 

357-3849: SWITCH & MTG GP-LIMIT

357-3849 SWITCH & MTG GP-LIMIT -WINDOW WIPER
S/N HLB1-UP; TEW1-UP
PART OF 316-8853 INSTALLATION AR-CAB
i03862670 M0070902
3573849 SWITCH & MTG GP-LIMIT Parts scheme
  For full view, you need register

Parts for your 349F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-1163 [1] BRACKET  
2. 357-3967 Y [1] SWITCH GP-LIMIT (WIPER)  
3. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00709020416
 

7N-0719: SWITCH GP-DISCONNECT

7N-0719 SWITCH GP-DISCONNECT -BATTERY
S/N HLB1-UP; TEW1-UP
PART OF 475-1163, 499-2152 WIRING GP-CHASSIS
i01102384 M0070902
7N0719 SWITCH GP-DISCONNECT Parts scheme
  For full view, you need register

Parts for your 349F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3922 [1] LOCKWASHER  
2. 8H-5303 [1] NUT (3/4-16-THD)  
3. 9F-5644 [2] LOCKWASHER  
4. 6F-7045 [2] NUT-FULL (3/8-24-THD)  
5. 8H-5306 [1] KEY (BATTERY DISCONNECT)  
 

#M00709020417
 

357-3967: SWITCH GP-LIMIT

357-3967 SWITCH GP-LIMIT -WIPER
S/N HLB1-UP; TEW1-UP
PART OF 357-3849 SWITCH & MTG GP-LIMIT
i04086413 M0070902
3573967 SWITCH GP-LIMIT Parts scheme
  For full view, you need register

Parts for your 349F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 111-4799 [1] SWITCH AS-LIMIT (WIPER)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  5P-5998 [3] TUBE  
3. 357-3968 [1] BRACKET AS  
4. 357-3971 [1] BRACKET  
5. 096-5962 [2] WASHER-HARD (3.4X7X0.8-MM THK)  
6. 120-9027 M [2] SCREW-PAN HEAD (M3X0.5X16-MM)  
7. 5P-8524 [1] GROMMET  
8. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
  M   METRIC PART
 

#M00709020418
 

383-5711: SWITCH GP-POSITION

383-5711 SWITCH GP-POSITION -HYDRAULIC LOCKOUT
S/N HLB1-UP; TEW1-UP
PART OF 316-8822 CONSOLE GP-OPERATOR
i06299073 M0070902
3835711 SWITCH GP-POSITION Parts scheme
  For full view, you need register

Parts for your 349F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
3. 111-4799 [1] SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  5P-5998 D TUBE (0.3-M)  
4. 5C-8312 M [2] NUT (M4X0.7-THD)  
5. 120-9027 M [2] SCREW-PAN HEAD (M3X0.5X16-MM)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#M00709020419
 

350-8405: SWITCH GP-ROCKER

350-8405 SWITCH GP-ROCKER -BOOM PRESSURE CONTROL
S/N HLB1-UP; TEW1-UP
PART OF 323-7862 CONTROL AR-BOOM
i04195109 M0070902
  For full view, you need register

Parts for your 349F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  306-8314 [1] SWITCH AS-ROCKER (BOOM PRESSURE CONTROL)  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
  167-3543 [4] TERMINAL (MALE)  
 

Information:

Special Instruction
Installation Procedure for the 354-4378 Pressure Sensor Group {1439, 5051}
Installation Procedure for the 354-4378 Pressure Sensor Group {1439, 5051}
Instructions for Installing Rotary Position Sensor for Cat<SUP>&reg;</SUP> Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Instructions for Installing Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
NOx Sensors Handling and Installation Procedures {191N}
NOx Sensors Handling and Installation Procedures {191N}
Machine Guidance Upgrades For Cat<SUP>&reg;</SUP> Grade Control Hydraulic Excavators {7220}
Machine Guidance Upgrades For Cat® Grade Control Hydraulic Excavators {7220}
Technical Information Bulletin
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Specifications
Coolant Temperature Sensor
C13 Tier 4 Final Engines
Engine Oil Pressure Sensor
C13 Tier 4 Final Engines
Inlet Manifold Air Pressure Sensor
C13 Tier 4 Final Engines
Atmospheric Pressure Sensor
C13 Tier 4 Final Engines
Engine Oil Pressure Sensor
C13 Tier 4 Final Engines
Engine Oil Pressure Sensor
C13 Tier 4 Final Engines
Engine Oil Pressure Sensor
C13 Tier 4 Final Engines
Coolant Temperature Sensor
C13 Tier 4 Final Engines
Atmospheric Pressure Sensor
C13 Tier 4 Final Engines
Inlet Manifold Temperature Sensor
C13 Tier 4 Final Engines
Inlet Manifold Air Pressure Sensor
C13 Tier 4 Final Engines
Speed/Timing Sensor
C13 Tier 4 Final Engines
Coolant Temperature Sensor
C13 Tier 4 Final Engines
Fuel Pressure Sensor
C13 Tier 4 Final Engines
Coolant Temperature Sensor
C13 Tier 4 Final Engines
Speed/Timing Sensor
C13 Tier 4 Final Engines
Coolant Temperature Sensor
C13 Tier 4 Final Engines
Speed/Timing Sensor
C13 Tier 4 Final Engines
Atmospheric Pressure Sensor
C13 Tier 4 Final Engines
Crankcase Pressure Sensor
C13 Tier 4 Final Engines
Pressure Sensor (DPF Inlet)
C13 Tier 4 Final Engines
Pressure Sensor (ARD Combustion Air)
C13 Tier 4 Final Engines
Temperature Sensor (DPF Inlet, Flame Detect)
C13 Tier 4 Final Engines
Speed/Timing Sensor
C13 Tier 4 Final Engines
Speed/Timing Sensor
C13 Tier 4 Final Engines
Inlet Manifold Temperature Sensor - Charge Air Cooler Outlet
C13 Tier 4 Final Engines
Temperature Sensor (NOx Reduction System)
C13 Tier 4 Final Engines
Speed/Timing Sensor
C13 Tier 4 Final Engines
Soot Antenna
C13 Tier 4 Final Engines
Pressure Sensor (NRS Absolute)
C13 Tier 4 Final Engines
Inlet Manifold Air Pressure Sensor
C13 Tier 4 Final Engines
Temperature Sensor (NOx Reduction System)
C13 Tier 4 Final Engines
Temperature Sensor (NOx Reduction System)
C13 Tier 4 Final Engines
Fuel Pressure Sensor
C13 Tier 4 Final Engines
Boost Pressure Sensor
C13 Tier 4 Final Engines
Engine Oil Pressure Sensor
C13 Tier 4 Final Engines
Speed/Timing Sensor
C13 Tier 4 Final Engines
Speed/Timing Sensor
C13 Tier 4 Final Engines
Speed/Timing Sensor
C13 Tier 4 Final Engines
Speed/Timing Sensor
C13 Tier 4 Final Engines
Inlet Manifold Air Pressure Sensor
C13 Tier 4 Final Engines
Inlet Manifold Temperature Sensor
C13 Tier 4 Final Engines
Engine Oil Pressure Sensor
C13 Tier 4 Final Engines
Speed/Timing Sensor
C13 Tier 4 Final Engines
Pressure Sensor (Exhaust Differential)
C13 Tier 4 Final Engines
Inlet Manifold Temperature Sensor
C13 Tier 4 Final Engines
Fuel Temperature Sensor
C13 Tier 4 Final Engines
Pressure Sensor (NRS Differential)
C13 Tier 4 Final Engines
Throttle Position Sensor
C13 Tier 4 Final Engines
Temperature Sensor (DPF Inlet, Flame Detect)
C13 Tier 4 Final Engines
Inlet Manifold Air Pressure Sensor
C13 Tier 4 Final Engines
Nitrogen Oxide Sensor - Engine Exhaust Out
C13 Tier 4 Final Engines
Nitrogen Oxide Sensor - Exhaust Pipe Out
C13 Tier 4 Final Engines
Nitrogen Oxide Sensor
C13 Tier 4 Final Engines
Inlet Manifold Air Pressure Sensor
C13 Tier 4 Final Engines
Pressure Sensor - Accumulator
349F and 352F Excavators Machine System Specifications
Pressure Sensor - BOOM DOWN
349F and 352F Excavators Machine System Specifications
Temperature Sensor (Catalyst Inlet)
C13 Tier 4 Final Engines
Inlet Manifold Temperature Sensor
C13 Tier 4 Final Engines
Throttle Position Sensor
C13 Tier 4 Final Engines
Nitrogen Oxide Sensor
C13 Tier 4 Final Engines
Position Sensor - Boom and Stick
349F and 352F Excavators Machine System Specifications
Position Sensor and Mounting - Body Tilt Sensor
349F and 352F Excavators Machine System Specifications
Systems Operation
Sensors
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Troubleshooting
Timing - Calibrate
C13, C15, and C18 Tier 4 Final Engines
Coolant Level - Test
C13, C15, and C18 Tier 4 Final Engines
Sensor Calibration Required - Test
C13, C15, and C18 Tier 4 Final Engines
Sensor Signal (Analog, Active) - Test
C13, C15, and C18 Tier 4 Final Engines
Sensor Signal (Analog, Passive) - Test
C13, C15, and C18 Tier 4 Final Engines
Sensor Supply - Test
C13, C15, and C18 Tier 4 Final Engines
Speed/Timing - Test
C13, C15, and C18 Tier 4 Final Engines
Sensor (Data Link Type) - Test
C13, C15, and C18 Tier 4 Final Engines
NOx Sensor - Test
C13, C15, and C18 Tier 4 Final Engines
DEF Pump Pressure Sensor - Test
C13, C15, and C18 Tier 4 Final Engines
DEF Pump Sensor Supply - Test
C13, C15, and C18 Tier 4 Final Engines
NOx Conversion Is Low
C13, C15, and C18 Tier 4 Final Engines
SCR Catalyst Inlet Temperature Sensor - Test
C13, C15, and C18 Tier 4 Final Engines
Cooling Fan Speed - Test
C13, C15, and C18 Tier 4 Final Engines
Sensor Signal (Analog, Passive) - Test
349F and 352F Excavators
Sensor Supply - Test
349F and 352F Excavators
Sensor Signal (PWM) - Test
349F and 352F Excavators
Water in Fuel - Test
C13, C15, and C18 Tier 4 Final Engines
Sensor Signal (Analog, Passive) - Test
349F and 352F Excavator Machine System
Sensor Signal (Analog, Active) - Test
349F and 352F Excavator Machine System
Sensor Signal (PWM) - Test
349F and 352F Excavator Machine System
Sensor Supply - Test
349F and 352F Excavator Machine System
Disassembly and Assembly
Camshaft Position Sensor - Remove and Install
C13 Engine for Caterpillar Built Machines
Crankshaft Position Sensor - Remove and Install
C13 Engine for Caterpillar Built Machines
Coolant Temperature Sensor - Remove and Install
C13 Engine for Caterpillar Built Machines
Engine Oil Pressure Sensor - Remove and Install
C13 Engine for Caterpillar Built Machines
Crankcase Pressure Sensor - Remove and Install
C13 Engine for Caterpillar Built Machines
Fuel Pressure Sensor - Remove and Install
C13 Engine for Caterpillar Built Machines
Fuel Temperature Sensor - Remove and Install
C13 Engine for Caterpillar Built Machines
Boost Pressure Sensor - Remove and Install
C13 Engine for Caterpillar Built Machines
Atmospheric Pressure Sensor - Remove and Install
C13 Engine for Caterpillar Built Machines
Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C13 Engine for Caterpillar Built Machines
Pressure Sensor (DPF) - Remove and Install
C13 Engine for Caterpillar Built Machines
Temperature Sensor (Catalyst Inlet) - Remove and Install
C13 Engine for Caterpillar Built Machines
Nitrogen Oxide Sensor - Remove and Install
C13 Engine for Caterpillar Built Machines
Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C13 Engine for Caterpillar Built Machines
Pressure Sensor (ARD Combustion Air) - Remove and Install
C13 Engine for Caterpillar Built Machines
Pressure Sensor (Cooled Exhaust Gas) - Remove and Install
C13 Engine for Caterpillar Built Machines
Inlet Air Temperature Sensor - Remove and Install
C13 Engine for Caterpillar Built Machines
Flame Detection Temperature Sensor - Remove and Install
349F and 352F Excavators Engine Supplement
Temperature Sensor (Catalyst Inlet) - Remove and Install
349F and 352F Excavators Engine Supplement
Pressure Sensor (DPF) - Remove and Install
349F and 352F Excavators Engine Supplement
Pressure Sensor (NRS Differential) - Remove and Install
C13 Engine for Caterpillar Built Machines
Pressure Sensor (NRS Absolute) - Remove and Install
C13 Engine for Caterpillar Built Machines
Position Sensor and Mounting (Bucket) - Remove and Install
349F and 352F Excavators Machine Systems
Service Magazine
An Improved Pilot Pressure Sensor is Now Used on Certain Excavators and Mobile Hydraulic Power Units {1439}
An Improved Pilot Pressure Sensor is Now Used on Certain Excavators and Mobile Hydraulic Power Units {1439}

Caterpillar Parts SIS Catalog 349F :

SENSOR GP-TEMPERATURE
234-5012 SENSOR GP-TEMPERATURE
SENSOR GP-SPEED
384-1836 SENSOR GP-SPEED
SENSOR GP-SPEED
364-0608 SENSOR GP-SPEED
SENSOR GP-SPEED
300-9806 SENSOR GP-SPEED
SENSOR GP-SPEED
300-9805 SENSOR GP-SPEED
SENSOR GP-PRESSURE
484-6970 SENSOR GP-PRESSURE
SENSOR GP-PRESSURE
454-5075 SENSOR GP-PRESSURE
SENSOR GP-PRESSURE
415-8044 SENSOR GP-PRESSURE
STARTING AID GP-ETHER
324-4364 STARTING AID GP-ETHER
STARTING MOTOR GP-ELECTRIC
349-6519 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
349-6530 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
352-8869 STARTING MOTOR GP-ELECTRIC
SWITCH & MTG GP-LIMIT
357-3849 SWITCH & MTG GP-LIMIT
SWITCH GP-DISCONNECT
7N-0719 SWITCH GP-DISCONNECT
SWITCH GP-LIMIT
357-3967 SWITCH GP-LIMIT
SWITCH GP-POSITION
383-5711 SWITCH GP-POSITION
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.