AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

370-6692 CYLINDER GP-STICK S/N HLB1-UP; TEW1-UP 190-MM (7.5-IN) BORE X 1758-MM (69.2-IN) STROKE PART OF 358-8460 CYLINDER & SEAL GP-STICK 349F


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
FILTER GP

EXCAVATOR 349F EXCAVATOR HLB
 349F & 349F L Excavators HLB00001-UP (MACHINE) POWERED BY C13 Engine M0070902 349F HLB   (2013)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BUCKET
358-8503 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
367-5217 CYLINDER GP-BUCKET
CYLINDER GP-STICK
370-6692 CYLINDER GP-STICK
CYLINDER GP-STICK
513-3691 CYLINDER GP-STICK
GUARD GP-CYLINDER
295-9600 GUARD GP-CYLINDER
 

#M00709020660
 

370-6692: CYLINDER GP-STICK

370-6692 CYLINDER GP-STICK
S/N HLB1-UP; TEW1-UP
190-MM (7.5-IN) BORE X 1758-MM (69.2-IN) STROKE
PART OF 358-8460 CYLINDER & SEAL GP-STICK
i04893815 M0070902
3706692 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 349F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 358-8462 [1] CYLINDER AS  
1A. 126-1956 [1] BUSHING  
2. 358-8472 [1] ROD AS  
2A. 228-5618 [1] BUSHING  
3. 370-6693 [1] HEAD  
4. 370-6664 J [1] SEAL-O-RING  
5. 370-6665 J [2] RING-BACKUP  
6. 165-9293 J [1] SEAL-LIP TYPE  
7. 087-5397 J [1] RING-BACKUP  
8. 333-8673 J [1] SEAL-U-CUP  
9. 333-8672 J [1] SEAL-BUFFER  
10. 114-0763 [1] BUSHING  
11. 087-5393 [1] RING-RETAINING  
12. 200-3620 J [1] RING-SEAL  
13. 359-7190 [1] STOP  
14. 358-8478 [1] PISTON  
15. 204-2845 J [2] RING  
16. 495-8218 J [1] SEAL AS  
17. 204-2846 J [1] RING  
18. 126-1971 M [1] LOCKNUT-SPECIAL  
19. 225-4641 [1] RING-RETAINING  
20. 225-4642 [1] RING  
21. 095-0930 [2] RING-RETAINING (EXTERNAL)  
22. 359-7189 [1] STOP  
23. 173-9684 M [10] BOLT (M24X3X100-MM)  
   
    AVAILABLE REPAIR KIT(S):
  518-5140 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#M00709020661
 

513-3691: CYLINDER GP-STICK

513-3691 CYLINDER GP-STICK
S/N HLB1-UP; TEW1-UP
190-MM (7.5-IN) BORE X 1758-MM (69.2-IN) STROKE
PART OF 358-8460, 518-0753 CYLINDER & SEAL GP-STICK
i06991309 M0070902
5133691 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 349F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 513-3690 [1] CYLINDER AS-STICK  
1A. 462-2010 [1] BUSHING  
2. 513-3687 [1] ROD AS  
2A. 228-5618 [1] BUSHING  
3. 370-6693 [1] HEAD  
4. 370-6664 J [1] SEAL-O-RING  
5. 370-6665 J [2] RING-BACKUP  
6. 165-9293 J [1] SEAL-LIP TYPE  
7. 087-5397 J [1] RING-BACKUP  
8. 333-8673 J [1] SEAL-U-CUP  
9. 333-8672 J [1] SEAL-BUFFER  
10. 114-0763 [1] BUSHING  
11. 524-7886 [1] STOP  
12. 200-3620 J [1] RING-SEAL  
13. 359-7190 [1] STOP  
14. 358-8478 [1] PISTON  
15. 204-2845 J [2] RING  
16. 495-8218 J [1] SEAL AS  
17. 204-2846 J [1] RING  
18. 126-1971 M [1] LOCKNUT-SPECIAL  
19. 143-1452 [2] RING-RETAINING  
20. 087-5393 [1] RING-RETAINING  
21. 147-5764 [1] RING-RETAINING  
22. 147-5765 [1] RING  
23. 173-9684 M [10] BOLT (M24X3X100-MM)  
24. 6V-8237 [10] WASHER (26X44X4-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  518-5140 J KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#M00709020662
 

315-4440: DRIVE & MTG GP-AUXILIARY PUMP

315-4440 DRIVE & MTG GP-AUXILIARY PUMP
S/N HLB10001-UP; TEW10001-UP
PART OF 325-8920 PUMP & MTG GP-AUXILIARY
i03993332 M0070902
3154440 DRIVE & MTG GP-AUXILIARY PUMP Parts scheme
  For full view, you need register

Parts for your 349F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 236-6919 [2] SEAL-O-RING  
2. 334-9958 [1] COUPLING  
3. 334-9959 [1] SPACER  
4. 8T-4648 M [2] BOLT (M12X1.75X70-MM)  
5. 2L-6726 [1] RING-RETAINING  
  M   METRIC PART
 

#M00709020663
 

333-2878: DRIVE & MTG GP-SWING

333-2878 DRIVE & MTG GP-SWING
S/N HLB1-UP; TEW1-UP
PART OF 333-2876, 539-0888 POWER TRAIN AR
i06526216 M0070902
3332878 DRIVE & MTG GP-SWING Parts scheme
  For full view, you need register

Parts for your 349F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7561 [4] CORK  
2. 5D-1026 [2] CLAMP-BAND  
3. 096-4755 [4] PIN  
4. 475-1176 CY [1] DRIVE GP-SWING (WITH MOTOR, RH)  
5. 475-1175 CY [1] DRIVE GP-SWING (WITH MOTOR, LH)  
6. 509-7906 M [20] BOLT (M24X3X70-MM)  
7. 6V-8237 [20] WASHER (26X44X4-MM THK)  
8. 5P-0767 E HOSE (130-CM EACH)  
   
  1U-8846 BF [1] SEALANT-GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00709020664
 

418-7155: DRIVE GP-SWING

418-7155 DRIVE GP-SWING -WITHOUT MOTOR, LH
S/N HLB1-UP; TEW1-UP
PART OF 475-1175 DRIVE GP-SWING
i06527449 M0070902
4187155 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-6112 [1] BREATHER (SWING DRIVE)  
2. 6V-7238 [1] VALVE-SHUTOFF  
3. 7Y-0597 [1] SPACER-SPECIAL  
4. 094-0611 [14] WASHER (47.3X76X1-MM THK)  
5. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
6. 114-1399 [1] PIPE-GAUGE  
7. 114-1403 [1] CAGE  
8. 227-6108 [1] SHAFT-PINION  
9. 227-6215 [1] BOSS (1/4-18-THD)  
10. 296-6268 [3] BEARING AS-ROLLER  
11. 418-7160 [1] GEAR-SUN (13-TEETH, 18-TEETH)  
12. 418-7161 [1] GEAR-SUN (23-TEETH)  
13. 418-7162 [3] GEAR-PLANETARY (25-TEETH)  
14. 418-7163 [4] GEAR-PLANETARY (22-TEETH)  
15. 418-7164 [1] GEAR-RING (69-TEETH)  
16. 418-7167 [4] SHAFT  
17. 418-7232 [1] COVER-HOUSING  
18. 418-7233 [8] BEARING AS-ROLLER  
19. 418-7234 [1] CARRIER AS  
20. 418-7235 [1] CARRIER-PLANETARY  
21. 422-1352 [2] SPACER (49.6X69.5X6-MM THK)  
22. 422-4054 [3] RING-RETAINING  
23. 451-2182 [52] WASHER-HARD (13.5X25.5X3-MM THK)  
24. 453-3446 M [1] BOLT (M12X1.75X35-MM)  
25. 453-3447 M [20] BOLT (M12X1.75X40-MM)  
26. 456-0784 [1] HOUSING  
27. 486-7828 [1] HOSE AS  
28. 093-1730 [2] RING-RETAINING  
29. 095-0670 M [30] BOLT (M12X1.75X45-MM)  
30. 509-6676 [4] PIN-SPRING  
31. 095-1806 [1] BEARING-ROLLER  
32. 096-2653 [1] RING-RETAINING  
33. 096-4339 [1] BEARING AS-ROLLER  
34. 135-9044 [2] SEAL-LIP TYPE  
35. 136-2803 [2] CLIP  
36. 3K-0360 [1] SEAL-O-RING  
37. 5P-2235 [1] SEAL-O-RING  
38. 7D-5363 [2] CONNECTOR (9/16-18-THD)  
39. 8T-4244 M [1] NUT (M12X1.75-THD)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#M00709020665
 

470-0474: DRIVE GP-SWING

470-0474 DRIVE GP-SWING -WITHOUT MOTOR, RH
S/N HLB1-UP; TEW1-UP
PART OF 475-1176 DRIVE GP-SWING
i06565323 M0070902
4700474 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-6112 [1] BREATHER (SWING DRIVE)  
2. 6V-7238 [1] VALVE-SHUTOFF  
3. 7Y-0597 [1] SPACER-SPECIAL  
4. 094-0611 [14] WASHER (47.3X76X1-MM THK)  
5. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
6. 114-1399 [1] PIPE-GAUGE  
7. 114-1403 [1] CAGE  
8. 227-6108 [1] SHAFT-PINION  
9. 227-6215 [1] BOSS (1/4-18-THD)  
10. 296-6268 [3] BEARING AS-ROLLER  
11. 418-7160 [1] GEAR-SUN (13-TEETH, 18-TEETH)  
12. 418-7161 [1] GEAR-SUN (23-TEETH)  
13. 418-7162 [3] GEAR-PLANETARY (25-TEETH)  
14. 418-7163 [4] GEAR-PLANETARY (22-TEETH)  
15. 418-7164 [1] GEAR-RING (69-TEETH)  
16. 418-7167 [4] SHAFT  
17. 418-7232 [1] COVER-HOUSING  
18. 418-7233 [8] BEARING AS-ROLLER  
19. 418-7234 [1] CARRIER AS  
20. 418-7235 [1] CARRIER-PLANETARY  
21. 422-1352 [2] SPACER (49.6X69.5X6-MM THK)  
22. 422-4054 [3] RING-RETAINING  
23. 451-2182 [52] WASHER-HARD (13.5X25.5X3-MM THK)  
24. 453-3446 M [1] BOLT (M12X1.75X35-MM)  
25. 453-3447 M [20] BOLT (M12X1.75X40-MM)  
26. 456-0784 [1] HOUSING  
27. 486-7828 [1] HOSE AS  
28. 093-1730 [2] RING-RETAINING  
29. 095-0670 M [30] BOLT (M12X1.75X45-MM)  
30. 509-6676 [4] PIN-SPRING  
31. 095-1806 [1] BEARING-ROLLER  
32. 096-2653 [1] RING-RETAINING  
33. 096-4339 [1] BEARING AS-ROLLER  
34. 135-9044 [2] SEAL-LIP TYPE  
35. 136-2803 [2] CLIP  
36. 3K-0360 [1] SEAL-O-RING  
37. 5P-2235 [1] SEAL-O-RING  
38. 7D-5363 [2] CONNECTOR (9/16-18-THD)  
39. 8T-4244 M [1] NUT (M12X1.75-THD)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#M00709020666
 

475-1175: DRIVE GP-SWING

475-1175 DRIVE GP-SWING -WITH MOTOR, LH
S/N HLB1-UP; TEW1-UP
PART OF 333-2878 DRIVE & MTG GP-SWING
i06527413 M0070902
4751175 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 418-7155 Y [1] DRIVE GP-SWING  
2. 486-5235 Y [1] MOTOR & MTG GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#M00709020667
 

475-1176: DRIVE GP-SWING

475-1176 DRIVE GP-SWING -WITH MOTOR, RH
S/N HLB1-UP; TEW1-UP
PART OF 333-2878 DRIVE & MTG GP-SWING
i06565313 M0070902
4751176 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 470-0474 Y [1] DRIVE GP-SWING  
2. 486-5235 Y [1] MOTOR & MTG GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#M00709020668
 

158-8987: FILTER & VALVE GP-PILOT

158-8987 FILTER & VALVE GP-PILOT -HYDRAULIC OIL
S/N HLB1-UP; TEW1-UP
PART OF 424-9524 LINES GP-PILOT
i01256862 M0070902
1588987 FILTER & VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 349F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-8670 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, PILOT)  
2. 215-4909 [1] VALVE GP-PILOT RELIEF (HYDRAULIC FILTER)  
2A. 095-1584 [1] SEAL-O-RING  
2B. 095-1590 [1] SEAL-O-RING  
2C. 095-1596 [1] SEAL-O-RING  
 

#M00709020669
 

188-4145: FILTER GP-OIL

188-4145 FILTER GP-OIL -HYDRAULIC RETURN
S/N HLB1-UP; TEW1-UP
PART OF 460-0382 TANK & FILTER GP-HYDRAULIC
i06194789 M0070902
1884145 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 349F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-2620 Y [1] HOUSING GP-FILTER  
2. 177-2617 Y [1] BLOCK GP-HYDRAULIC  
3. 177-2625 [1] PACKING  
4. 095-1682 [1] SEAL-O-RING  
5. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
6. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
7. 419-8528 CY [1] FILTER GP-OIL (HYDRAULIC RETURN)  
8. 173-3510 [1] COVER  
9. 123-2003 [1] SEAL-O-RING  
10. 8T-4184 M [4] BOLT (M12X1.75X45-MM)  
11. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 175-6178 [1] HOUSING  
13. 177-2623 [1] VALVE AS (BYPASS)  
14. 175-6174 [1] PIPE  
15. 8T-4970 M [2] BOLT (M6X1X14-MM)  
16. 175-6176 [1] SEAL-O-RING  
17. 6V-8932 M [1] SETSCREW-SOCKET (M6X1X10-MM)  
18. 095-1663 [2] SEAL-O-RING  
19. 187-7171 [2] BOLT (M8X1.25X14-MM)  
20. 175-6175 [1] PIPE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER HEAD BOLTS ON CERTAIN 345, 349, 352 LARGE EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER HEAD BOLTS ON CERTAIN 345, 349, 352 LARGE EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Bucket Cylinder
349F and 352F Excavators Machine System Specifications
Boom Cylinder Lines
349F and 352F Excavators Machine System Specifications
Boom Cylinder Lines
349F and 352F Excavators Machine System Specifications
Boom Cylinder
349F and 352F Excavators Machine System Specifications
Boom Lines
349F and 352F Excavators Machine System Specifications
Bucket Cylinder
349F and 352F Excavators Machine System Specifications
Bucket Cylinder
349F and 352F Excavators Machine System Specifications
Cylinder Guard
349F and 352F Excavators Machine System Specifications
Boom Cylinder Lines
349F and 352F Excavators Machine System Specifications
Boom Cylinder Lines
349F and 352F Excavators Machine System Specifications
Stick Cylinder
349F and 352F Excavators Machine System Specifications
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER HEAD BOLTS ON CERTAIN 345, 349, 352 LARGE EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER HEAD BOLTS ON CERTAIN 345, 349, 352 LARGE EXCAVATORS
Service Letter-Asia
Systems Operation
Cylinders (Boom, Stick and Bucket)
349F and 352F Excavators Hydraulic System
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER HEAD BOLTS ON CERTAIN 345, 349, 352 LARGE EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER HEAD BOLTS ON CERTAIN 345, 349, 352 LARGE EXCAVATORS
Testing and Adjusting
Cylinder Drift - Check - Loaded Bucket
349F and 352F Excavators Hydraulic System
Cylinder Drift - Check - Empty Bucket
349F and 352F Excavators Hydraulic System
Cylinder Speed - Check
349F and 352F Excavators Hydraulic System
Relief Valve (Counterweight Cylinder) - Test and Adjust
349F and 352F Excavators Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Counterweight Cylinder - Remove and Install
349F and 352F Excavators Machine Systems
Manual Valve (Boom Lowering) - Remove and Install
349F and 352F Excavators Machine Systems
Load Control Valve (Stick Cylinder) - Remove and Install
349F and 352F Excavators Machine Systems
Load Control Valve (Stick Cylinder) - Remove and Install
349F and 352F Excavators Machine Systems
Bucket Cylinder - Remove and Install
349F and 352F Excavators Machine Systems
Stick Cylinder - Remove and Install
349F and 352F Excavators Machine Systems
Boom Cylinder - Remove and Install
349F and 352F Excavators Machine Systems
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
New Cylinder Head Bolts are Now Used on Certain Excavators {5456, 5457, 5458}
2015/04/08
New Bolts are Now Used for the Stick Cylinder Head on Certain Excavators {5458}
2015/09/25
New Cylinder Head Bolts are Now Used on Certain Excavators {5457, 5458}
New Cylinder Head Bolts are Now Used on Certain Excavators {5457, 5458}
New Stick Cylinder Group Is Now Used on Certain Excavators and OEM Excavator Based Specialty Solutions {5458}
New Stick Cylinder Group Is Now Used on Certain Excavators and OEM Excavator Based Specialty Solutions {5458}
Stick Cylinder Head Bolted Joint Improvement is Now Used on Certain 349D, 349D2, 349E, 349F, and 352F Excavators {5458}
Stick Cylinder Head Bolted Joint Improvement is Now Used on Certain 349D, 349D2, 349E, 349F, and 352F Excavators {5458}

Caterpillar Parts SIS Catalog 349F :

CYLINDER GP-BUCKET
367-5217 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
358-8503 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
357-9784 CYLINDER GP-BUCKET
CYLINDER GP-BOOM
419-5749 CYLINDER GP-BOOM
358-8432 CYLINDER AR-BOOM
CYLINDER & SEAL GP-STICK
518-0753 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
358-8460 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
358-8460 CYLINDER & SEAL GP-STICK
CYLINDER GP-STICK
513-3691 CYLINDER GP-STICK
DRIVE & MTG GP-AUXILIARY PUMP
315-4440 DRIVE & MTG GP-AUXILIARY PUMP
DRIVE & MTG GP-SWING
333-2878 DRIVE & MTG GP-SWING
DRIVE GP-SWING
418-7155 DRIVE GP-SWING
DRIVE GP-SWING
470-0474 DRIVE GP-SWING
DRIVE GP-SWING
475-1175 DRIVE GP-SWING
DRIVE GP-SWING
475-1176 DRIVE GP-SWING
FILTER & VALVE GP-PILOT
158-8987 FILTER & VALVE GP-PILOT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.