AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

505-8071 WIRING GP-CONSOLE -CANOPY S/N FC21-UP PART OF 505-5967, 505-5971 CANOPY AR Type 1 AN ATTACHMENT 304E2 CR


ELECTRICAL AND STARTING SYSTEM
WIRING GP

MINI HYD EXCAVATOR 304E2 CR MINI HYD EXCAVATOR FC2
 304E2CR Mini Hydraulic Excavator FC200001-UP (MACHINE) POWERED BY C2.4 Engine M0071206 304E2 CR FC2   (2016)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CONSOLE
505-8070 WIRING GP-CONSOLE
WIRING GP-CONSOLE
505-8070 WIRING GP-CONSOLE
WIRING GP-CONSOLE
505-8071 WIRING GP-CONSOLE
WIRING GP-CONSOLE
505-8071 WIRING GP-CONSOLE
WIRING GP-CONSOLE
505-8072 WIRING GP-CONSOLE
WIRING GP-CONSOLE
505-8072 WIRING GP-CONSOLE
 

#M00712060120
 

505-8071: WIRING GP-CONSOLE

505-8071 WIRING GP-CONSOLE -CANOPY
S/N FC21-UP
PART OF 505-5967, 505-5971 CANOPY AR
Type 1
AN ATTACHMENT
i06692425 M0071206
5058071 WIRING GP-CONSOLE Parts scheme 5058071 WIRING GP-CONSOLE Parts scheme 5058071 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 304E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [25] STRAP-CABLE  
2. 7K-1181 [31] STRAP-CABLE  
3. 8X-5804 [1] STRAP AS-GROUND  
4. 109-2356 [5] PLUG  
5. 110-6109 [1] KNOB-CONTROL (THROTTLE)  
6. 113-8490 [1] FUSE (10-AMPERE)  
7. 113-8492 [1] FUSE (20-AMPERE)  
8. 116-7471 [1] PULLER-MINIFUSE  
9. 124-3548 [1] FUSE (30-AMPERE)  
10. 140-9378 [8] RELAY AS (12-VOLT)(CONSOLE)  
11. 141-2759 [1] FUSE (5-AMPERE)  
12. 163-6795 [3] STRAP-CABLE  
13. 214-6197 [2] PLUG  
14. 231-9633 [1] RESISTOR AS  
15. 266-1404 [1] SWITCH AS-ROCKER (12-VOLT)(LIGHT)  
  111-7899 [1] GASKET  
16. 266-6935 [1] RELAY AS (12-VOLT)(START)  
17. 266-7379 [2] STRAP-CABLE  
18. 267-7058 [1] SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
19. 298-0663 [1] CLIP (LADDER)  
20. 306-9039 [1] COVER AS-PROTECTION  
21. 319-4420 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
22. 322-8964 [1] SWITCH AS-START (KEY)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
23. 362-3225 [1] SWITCH AS-PRESSURE (PILOT, TRAVEL)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
24. 364-3882 [1] BUZZER (12-VOLT)  
25. 366-4622 [1] KIT-SERVICE METER (32-VOLT DC)  
    (INCLUDES SERVICE METER & FILM)
26. 367-6419 [1] HOLDER-FUSE  
27. 370-5354 [1] PLATE AS  
28. 392-2858 [1] PLATE AS  
29. 445-0000 Y [1] ELECTRONICS GP-MONITOR (CONSOLE)  
30. 464-1212 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
31. 479-4292 [1] GROMMET  
32. 505-8094 Y [1] HARNESS AS-CONSOLE (MAIN)  
33. 505-8111 [1] COVER  
34. 095-0742 M [2] SCREW-MACHINE (M6X1X16-MM)  
35. 096-6166 [1] WASHER-HARD (4.5X9X1-MM THK)  
36. 132-5789 [2] CLIP (LADDER)  
37. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
38. 3J-1907 [1] SEAL-O-RING  
39. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
40. 4P-7581 [1] CLIP (LADDER)  
41. 5C-9553 M [4] BOLT (M6X1X16-MM)  
42. 6V-5210 M [1] SCREW-MACHINE (M4X0.7X10-MM)  
43. 6V-9671 M [1] SCREW-MACHINE (M3X0.5X12-MM)  
44. 7I-2272 M [1] BOLT (M5X0.8X12-MM)  
45. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
46. 8T-2658 M [1] LOCKNUT (M3X0.5-THD)  
47. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
48. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
49. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
50. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
51. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
52. 8T-4970 M [1] BOLT (M6X1X14-MM)  
53. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
54. 9X-8256 [5] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00712060121
 

505-8071: WIRING GP-CONSOLE

505-8071 WIRING GP-CONSOLE -CANOPY
S/N FC21-UP
PART OF 505-5967, 505-5971 CANOPY AR
Type 2
AN ATTACHMENT
i07271089 M0071206
5058071 WIRING GP-CONSOLE Parts scheme 5058071 WIRING GP-CONSOLE Parts scheme 5058071 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 304E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [25] STRAP-CABLE  
2. 7K-1181 [31] STRAP-CABLE  
3. 8X-5804 [1] STRAP AS-GROUND  
4. 109-2356 [5] PLUG  
5. 110-6109 [1] KNOB-CONTROL (THROTTLE)  
6. 113-8490 [1] FUSE (10-AMPERE)  
7. 113-8492 [1] FUSE (20-AMPERE)  
8. 116-7471 [1] PULLER-MINIFUSE  
9. 124-3548 [1] FUSE (30-AMPERE)  
10. 140-9378 [1] RELAY AS (12-VOLT)(HORN)  
10A. 140-9378 [1] RELAY AS (12-VOLT)(PATTERN CHANGE)  
10B. 140-9378 [1] RELAY AS (12-VOLT)(SERVICE METER)  
10C. 140-9378 [1] RELAY AS (12-VOLT)(FLOODLIGHTS)  
10D. 140-9378 [1] RELAY AS (12-VOLT)(HEADLIGHTS)  
10E. 140-9378 [1] RELAY AS (12-VOLT)(FAULT ALARM)  
10F. 140-9378 [1] RELAY AS (12-VOLT)(TRAVEL SPEED)  
10G. 140-9378 [1] RELAY AS (12-VOLT)(SAFETY)  
11. 141-2759 [1] FUSE (5-AMPERE)  
12. 163-6795 [3] STRAP-CABLE  
13. 214-6197 [2] PLUG  
14. 231-9633 [1] RESISTOR AS (TRAVEL SPEED)  
15. 266-1404 [1] SWITCH AS-ROCKER (12-VOLT)(LIGHT)  
  111-7899 [1] GASKET  
16. 266-6935 [1] RELAY AS (12-VOLT)(START)  
17. 266-7379 [2] STRAP-CABLE  
18. 267-7058 [1] SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
19. 298-0663 [1] CLIP (LADDER)  
20. 306-9039 [1] COVER AS-PROTECTION  
21. 319-4420 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
22. 322-8964 [1] SWITCH AS-START (KEY)(ENGINE)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
23. 362-3225 [1] SWITCH AS-PRESSURE (PILOT, TRAVEL)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
24. 364-3882 [1] BUZZER (12-VOLT)  
25. 542-8884 [1] METER AS  
  366-4622 [1] KIT-SERVICE METER (32-VOLT DC)  
    (INCLUDES SERVICE METER & FILM)
26. 367-6419 [1] HOLDER-FUSE  
27. 370-5354 [1] PLATE AS  
28. 392-2858 [1] PLATE AS  
29. 445-0000 Y [1] ELECTRONICS GP-MONITOR (CAB CONSOLE)  
30. 464-1212 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
31. 479-4292 [1] GROMMET  
32. 542-8808 CY [1] HARNESS AS-CHASSIS (MAIN)  
33. 505-8111 [1] COVER  
34. 095-0742 M [2] SCREW-MACHINE (M6X1X16-MM)  
35. 096-6166 [1] WASHER-HARD (4.5X9X1-MM THK)  
36. 132-5789 [2] CLIP (LADDER)  
37. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
38. 3J-1907 [1] SEAL-O-RING  
39. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
40. 4P-7581 [1] CLIP (LADDER)  
41. 5C-9553 M [4] BOLT (M6X1X16-MM)  
42. 6V-5210 M [1] SCREW-MACHINE (M4X0.7X10-MM)  
43. 6V-9671 M [1] SCREW-MACHINE (M3X0.5X12-MM)  
44. 7I-2272 M [1] BOLT (M5X0.8X12-MM)  
45. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
46. 8T-2658 M [1] LOCKNUT (M3X0.5-THD)  
47. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
48. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
49. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
50. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
51. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
52. 8T-4970 M [1] BOLT (M6X1X14-MM)  
53. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
54. 9X-8256 [5] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00712060122
 

505-8072: WIRING GP-CONSOLE

505-8072 WIRING GP-CONSOLE -CAB
S/N KC41-UP
CRANE
PART OF 505-5976, 505-5980 CAB AR
Type 1
AN ATTACHMENT
i06692418 M0071206
5058072 WIRING GP-CONSOLE Parts scheme 5058072 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 304E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [19] STRAP-CABLE  
2. 7K-1181 [39] STRAP-CABLE  
3. 8X-5804 [1] STRAP AS-GROUND  
4. 109-2356 [4] PLUG  
5. 110-6109 [1] KNOB-CONTROL (THROTTLE)  
6. 113-8490 [1] FUSE (10-AMPERE)  
7. 113-8492 [1] FUSE (20-AMPERE)  
8. 116-7471 [1] PULLER-MINIFUSE  
9. 124-3548 [1] FUSE (30-AMPERE)  
10. 140-9378 [10] RELAY AS (12-VOLT)(CONSOLE)  
11. 141-2759 [1] FUSE (5-AMPERE)  
12. 158-7802 [1] SWITCH AS-ROCKER (WINDOW WASHER, WIPER)  
  111-7899 [1] GASKET  
13. 163-6795 [3] STRAP-CABLE  
14. 231-9633 [2] RESISTOR AS  
15. 266-1404 [1] SWITCH AS-ROCKER (12-VOLT)(LIGHT)  
  111-7899 [1] GASKET  
16. 266-6935 [1] RELAY AS (12-VOLT)(ENGINE)  
17. 266-7379 [3] STRAP-CABLE  
18. 267-7058 [1] SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
19. 276-2332 [1] SWITCH AS-TOGGLE (THROTTLE CONTROL)  
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  276-1942 [1] SWITCH AS-TOGGLE  
  6T-3632 [1] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3633 [1] RING-LOCKING  
20. 298-0663 [1] CLIP (LADDER)  
21. 319-4420 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
22. 322-8964 [1] SWITCH AS-START (KEY)(ENGINE)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
23. 362-3225 [1] SWITCH AS-PRESSURE (PILOT, TRAVEL)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
24. 364-3882 [1] BUZZER (12-VOLT)  
25. 366-4622 [1] KIT-SERVICE METER (32-VOLT DC)  
    (INCLUDES SERVICE METER & FILM)
26. 367-6419 [1] HOLDER-FUSE  
27. 370-5354 [1] PLATE AS  
28. 392-2858 [1] PLATE AS  
29. 437-4852 [1] COVER  
30. 437-4853 [1] BRACKET AS  
31. 445-0000 Y [1] ELECTRONICS GP-MONITOR  
32. 458-0723 Y [1] HARNESS AS-LIGHTING  
33. 464-1212 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
34. 479-4292 [1] GROMMET  
35. 505-8094 Y [1] HARNESS AS-CONSOLE (MAIN)  
36. 505-8095 Y [1] HARNESS AS-CONSOLE (CRANE)  
37. 095-0723 M [1] SCREW-SPECIAL (M3X0.5X10-MM)  
38. 095-0742 M [2] SCREW-MACHINE (M6X1X16-MM)  
39. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
40. 132-5789 [2] CLIP (LADDER)  
41. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
42. 204-1611 [2] STRAP (DUAL)  
43. 3J-1907 [1] SEAL-O-RING  
44. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
45. 5C-9553 M [6] BOLT (M6X1X16-MM)  
46. 6V-5210 M [1] SCREW-MACHINE (M4X0.7X10-MM)  
47. 7I-2272 M [1] BOLT (M5X0.8X12-MM)  
48. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
49. 8T-0337 M [1] SCREW-MACHINE (M4X0.7X12-MM)  
50. 8T-2658 M [1] LOCKNUT (M3X0.5-THD)  
51. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
52. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
53. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
54. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
55. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
56. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
57. 8T-4970 M [1] BOLT (M6X1X14-MM)  
58. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
59. 9X-8256 [7] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00712060123
 

505-8072: WIRING GP-CONSOLE

505-8072 WIRING GP-CONSOLE -CAB
S/N KC41-UP
CRANE
PART OF 505-5976, 505-5980 CAB AR
Type 2
AN ATTACHMENT
i07271033 M0071206
5058072 WIRING GP-CONSOLE Parts scheme 5058072 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 304E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [19] STRAP-CABLE  
2. 7K-1181 [39] STRAP-CABLE  
3. 8X-5804 [1] STRAP AS-GROUND  
4. 109-2356 [4] PLUG  
5. 110-6109 [1] KNOB-CONTROL (THROTTLE)  
6. 113-8490 [1] FUSE (10-AMPERE)  
7. 113-8492 [1] FUSE (20-AMPERE)  
8. 116-7471 [1] PULLER-MINIFUSE  
9. 124-3548 [1] FUSE (30-AMPERE)  
10. 140-9378 [1] RELAY AS (12-VOLT)(HORN)  
10A. 140-9378 [1] RELAY AS (12-VOLT)(PATTERN CHANGE)  
10B. 140-9378 [1] RELAY AS (12-VOLT)(FAULT ALARM)  
10C. 140-9378 [1] RELAY AS (12-VOLT)(SERVICE METER)  
10D. 140-9378 [1] RELAY AS (12-VOLT)(FLOODLIGHTS)  
10E. 140-9378 [1] RELAY AS (12-VOLT)(HEADLIGHTS)  
10F. 140-9378 [1] RELAY AS (12-VOLT)(COURTESY LAMP)  
10G. 140-9378 [1] RELAY AS (12-VOLT)(TRAVEL SPEED)  
10H. 140-9378 [1] RELAY AS (12-VOLT)(SAFETY)  
10J. 140-9378 [1] RELAY AS (12-VOLT)(KEY SWITCH)  
11. 141-2759 [1] FUSE (5-AMPERE)  
12. 158-7802 [1] SWITCH AS-ROCKER (WINDOW WASHER, WIPER)  
  111-7899 [1] GASKET  
13. 163-6795 [3] STRAP-CABLE  
14. 231-9633 [2] RESISTOR AS (TRAVEL SPEED)  
15. 266-1404 [1] SWITCH AS-ROCKER (12-VOLT)(LIGHT)  
  111-7899 [1] GASKET  
16. 266-6935 [1] RELAY AS (12-VOLT)(ENGINE)  
17. 266-7379 [3] STRAP-CABLE  
18. 267-7058 [1] SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
19. 276-2332 [1] SWITCH AS-TOGGLE (THROTTLE CONTROL)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  6T-3632 [1] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3633 [1] RING-LOCKING  
20. 298-0663 [1] CLIP (LADDER)  
21. 319-4420 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
22. 322-8964 [1] SWITCH AS-START (KEY)(ENGINE)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
23. 362-3225 [1] SWITCH AS-PRESSURE (PILOT, TRAVEL)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
24. 364-3882 [1] BUZZER (12-VOLT)  
25. 542-8884 [1] METER AS  
  366-4622 [1] KIT-SERVICE METER (32-VOLT DC)  
    (INCLUDES SERVICE METER & FILM)
26. 367-6419 [1] HOLDER-FUSE  
27. 370-5354 [1] PLATE AS  
28. 392-2858 [1] PLATE AS  
29. 437-4852 [1] COVER  
30. 437-4853 [1] BRACKET AS  
31. 445-0000 Y [1] ELECTRONICS GP-MONITOR (CAB CONSOLE)  
32. 458-0723 Y [1] HARNESS AS-LIGHTING (CRANE)  
33. 464-1212 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
34. 479-4292 [1] GROMMET  
35. 542-8808 CY [1] HARNESS AS-CHASSIS (MAIN)  
36. 505-8095 Y [1] HARNESS AS-CONSOLE (CRANE)  
37. 095-0723 M [1] SCREW-SPECIAL (M3X0.5X10-MM)  
38. 095-0742 M [2] SCREW-MACHINE (M6X1X16-MM)  
39. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
40. 132-5789 [2] CLIP (LADDER)  
41. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
42. 204-1611 [2] STRAP (DUAL)  
43. 3J-1907 [1] SEAL-O-RING  
44. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
45. 5C-9553 M [6] BOLT (M6X1X16-MM)  
46. 6V-5210 M [1] SCREW-MACHINE (M4X0.7X10-MM)  
47. 7I-2272 M [1] BOLT (M5X0.8X12-MM)  
48. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
49. 8T-0337 M [1] SCREW-MACHINE (M4X0.7X12-MM)  
50. 8T-2658 M [1] LOCKNUT (M3X0.5-THD)  
51. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
52. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
53. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
54. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
55. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
56. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
57. 8T-4970 M [1] BOLT (M6X1X14-MM)  
58. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
59. 9X-8256 [7] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00712060124
 

505-8073: WIRING GP-CONSOLE

505-8073 WIRING GP-CONSOLE -CANOPY
S/N KC41-UP
CRANE
PART OF 505-5968, 505-5972 CANOPY AR
Type 1
AN ATTACHMENT
i06692419 M0071206
5058073 WIRING GP-CONSOLE Parts scheme 5058073 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 304E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [18] STRAP-CABLE  
2. 7K-1181 [40] STRAP-CABLE  
3. 8X-5804 [1] STRAP AS-GROUND  
4. 109-2356 [5] PLUG  
5. 110-6109 [1] KNOB-CONTROL (THROTTLE)  
6. 113-8490 [1] FUSE (10-AMPERE)  
7. 113-8492 [1] FUSE (20-AMPERE)  
8. 116-7471 [1] PULLER-MINIFUSE  
9. 124-3548 [1] FUSE (30-AMPERE)  
10. 140-9378 [1] RELAY AS (12-VOLT)(HORN)  
10A. 140-9378 [1] RELAY AS (12-VOLT)(PATTERN CHANGE)  
10B. 140-9378 [1] RELAY AS (12-VOLT)(WARNING LIGHT)  
10C. 140-9378 [1] RELAY AS (12-VOLT)(SERVICE METER)  
10D. 140-9378 [1] RELAY AS (12-VOLT)(FLOODLIGHTS)  
10E. 140-9378 [1] RELAY AS (12-VOLT)(HEADLIGHTS)  
10F. 140-9378 [1] RELAY AS (12-VOLT)(SAFETY)  
10G. 140-9378 [1] RELAY AS (12-VOLT)(TRAVEL SPEED)  
10H. 140-9378 [1] RELAY AS (12-VOLT)(FAULT ALARM)  
11. 141-2759 [1] FUSE (5-AMPERE)  
12. 163-6795 [3] STRAP-CABLE  
13. 231-9633 [1] RESISTOR AS (BACKUP)  
13A. 231-9633 [1] RESISTOR AS (TRAVEL SPEED)  
14. 266-1404 [1] SWITCH AS-ROCKER (12-VOLT)(LIGHT)  
  111-7899 [1] GASKET  
15. 266-6935 [1] RELAY AS (12-VOLT)(ENGINE START, SHUTOFF)  
16. 266-7379 [2] STRAP-CABLE  
17. 267-7058 [1] SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
18. 276-2332 [1] SWITCH AS-TOGGLE (BACKUP CONTROL, CRANE)  
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
19. 298-0663 [1] CLIP (LADDER)  
20. 306-9039 [1] COVER AS-PROTECTION  
21. 319-4420 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
22. 322-8964 J [1] SWITCH AS-START (KEY)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
23. 362-3225 [1] SWITCH AS-PRESSURE (TRAVEL)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
24. 364-3882 [1] BUZZER (12-VOLT)  
25. 366-4622 [1] KIT-SERVICE METER (32-VOLT DC)  
    (INCLUDES SERVICE METER & FILM)
26. 367-6419 [1] HOLDER-FUSE  
27. 370-5354 [1] PLATE AS  
28. 392-2858 [1] PLATE AS  
29. 437-4852 [1] COVER  
30. 437-4853 [1] BRACKET AS  
31. 445-0000 Y [1] ELECTRONICS GP-MONITOR (CONSOLE)  
32. 464-1212 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
33. 479-4292 [1] GROMMET  
34. 505-8094 Y [1] HARNESS AS-CONSOLE (MAIN)  
35. 505-8095 Y [1] HARNESS AS-CONSOLE (CRANE)  
36. 505-8111 [1] COVER  
37. 095-0742 M [2] SCREW-MACHINE (M6X1X16-MM)  
38. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
39. 132-5789 [2] CLIP (LADDER)  
40. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
41. 3J-1907 [1] SEAL-O-RING  
42. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
43. 4P-7581 [1] CLIP (LADDER)  
44. 5C-9553 M [6] BOLT (M6X1X16-MM)  
45. 6V-5210 M [1] SCREW-MACHINE (M4X0.7X10-MM)  
46. 6V-9671 M [1] SCREW-MACHINE (M3X0.5X12-MM)  
47. 7I-2272 M [1] BOLT (M5X0.8X12-MM)  
48. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
49. 8T-0337 M [1] SCREW-MACHINE (M4X0.7X12-MM)  
50. 8T-2658 M [1] LOCKNUT (M3X0.5-THD)  
51. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
52. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
53. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
54. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
55. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
56. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
57. 8T-4970 M [1] BOLT (M6X1X14-MM)  
58. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
59. 9X-8256 [7] WASHER (6.6X12X2-MM THK)  
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00712060125
 

505-8073: WIRING GP-CONSOLE

505-8073 WIRING GP-CONSOLE -CANOPY
S/N KC41-UP
CRANE
PART OF 505-5968, 505-5972 CANOPY AR
Type 2
AN ATTACHMENT
i07271090 M0071206
5058073 WIRING GP-CONSOLE Parts scheme 5058073 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 304E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [18] STRAP-CABLE  
2. 7K-1181 [40] STRAP-CABLE  
3. 8X-5804 [1] STRAP AS-GROUND  
4. 109-2356 [5] PLUG  
5. 110-6109 [1] KNOB-CONTROL (THROTTLE)  
6. 113-8490 [1] FUSE (10-AMPERE)  
7. 113-8492 [1] FUSE (20-AMPERE)  
8. 116-7471 [1] PULLER-MINIFUSE  
9. 124-3548 [1] FUSE (30-AMPERE)  
10. 140-9378 [1] RELAY AS (12-VOLT)(HORN)  
10A. 140-9378 [1] RELAY AS (12-VOLT)(PATTERN CHANGE)  
10B. 140-9378 [1] RELAY AS (12-VOLT)(WARNING LIGHT)  
10C. 140-9378 [1] RELAY AS (12-VOLT)(SERVICE METER)  
10D. 140-9378 [1] RELAY AS (12-VOLT)(FLOODLIGHTS)  
10E. 140-9378 [1] RELAY AS (12-VOLT)(HEADLIGHTS)  
10F. 140-9378 [1] RELAY AS (12-VOLT)(SAFETY)  
10G. 140-9378 [1] RELAY AS (12-VOLT)(TRAVEL SPEED)  
10H. 140-9378 [1] RELAY AS (12-VOLT)(FAULT ALARM)  
11. 141-2759 [1] FUSE (5-AMPERE)  
12. 163-6795 [3] STRAP-CABLE  
13. 231-9633 [1] RESISTOR AS (BACKUP)  
13A. 231-9633 [1] RESISTOR AS (TRAVEL SPEED)  
14. 266-1404 [1] SWITCH AS-ROCKER (12-VOLT)(LIGHT)  
  111-7899 [1] GASKET  
15. 266-6935 [1] RELAY AS (12-VOLT)(ENGINE START, SHUTOFF)  
16. 266-7379 [2] STRAP-CABLE  
17. 267-7058 [1] SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
18. 276-2332 [1] SWITCH AS-TOGGLE (THROTTLE CONTROL)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
19. 298-0663 [1] CLIP (LADDER)  
20. 306-9039 [1] COVER AS-PROTECTION  
21. 319-4420 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
22. 322-8964 [1] SWITCH AS-START (KEY)(ENGINE)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
23. 362-3225 [1] SWITCH AS-PRESSURE (PILOT, TRAVEL)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
24. 364-3882 [1] BUZZER (12-VOLT)  
25. 542-8884 [1] METER AS  
  366-4622 [1] KIT-SERVICE METER (32-VOLT DC)  
    (INCLUDES SERVICE METER & FILM)
26. 367-6419 [1] HOLDER-FUSE  
27. 370-5354 [1] PLATE AS  
28. 392-2858 [1] PLATE AS  
29. 437-4852 [1] COVER  
30. 437-4853 [1] BRACKET AS  
31. 445-0000 Y [1] ELECTRONICS GP-MONITOR (CAB CONSOLE)  
32. 464-1212 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
33. 479-4292 [1] GROMMET  
34. 542-8808 CY [1] HARNESS AS-CHASSIS (MAIN)  
35. 505-8095 Y [1] HARNESS AS-CONSOLE (CRANE)  
36. 505-8111 [1] COVER  
37. 095-0742 M [2] SCREW-MACHINE (M6X1X16-MM)  
38. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
39. 132-5789 [2] CLIP (LADDER)  
40. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
41. 3J-1907 [1] SEAL-O-RING  
42. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
43. 4P-7581 [1] CLIP (LADDER)  
44. 5C-9553 M [6] BOLT (M6X1X16-MM)  
45. 6V-5210 M [1] SCREW-MACHINE (M4X0.7X10-MM)  
46. 6V-9671 M [1] SCREW-MACHINE (M3X0.5X12-MM)  
47. 7I-2272 M [1] BOLT (M5X0.8X12-MM)  
48. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
49. 8T-0337 M [1] SCREW-MACHINE (M4X0.7X12-MM)  
50. 8T-2658 M [1] LOCKNUT (M3X0.5-THD)  
51. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
52. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
53. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
54. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
55. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
56. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
57. 8T-4970 M [1] BOLT (M6X1X14-MM)  
58. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
59. 9X-8256 [7] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00712060126
 

505-8062: WIRING GP-ENGINE

505-8062 WIRING GP-ENGINE -CAB
PART OF 505-5975, 505-5976, 505-5979, 505-5980 CAB AR
Type 1
AN ATTACHMENT
i06691809 M0071206
5058062 WIRING GP-ENGINE Parts scheme 5058062 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 304E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 370-5367 [1] STRAP AS-GROUND  
2. 3S-2093 [12] STRAP-CABLE  
3. 7K-1181 [15] STRAP-CABLE  
4. 266-7379 [1] STRAP-CABLE  
5. 267-4211 [1] SPACER (8.8X16X15-MM THK)  
6. 416-4218 Y [1] HARNESS AS-WIRING (CAN DATA LINK)  
7. 465-6073 [1] BRACKET  
8. 465-6074 [1] BRACKET  
9. 471-5195 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
10. 477-1182 [1] BRACKET AS  
11. 505-8096 Y [1] HARNESS AS-ENGINE  
12. 096-2626 [1] CLIP  
13. 096-6166 [8] WASHER-HARD (4.5X9X1-MM THK)  
14. 127-4839 M [1] BOLT (M10X1.25X25-MM)  
15. 132-5789 [4] CLIP (LADDER)  
16. 132-7551 [1] SPACER (11X19X6-MM THK)  
17. 150-3715 M [2] BOLT (M12X1.25X25-MM)  
18. 156-6175 [7] CLIP (LADDER)  
19. 204-1611 [2] STRAP (DUAL)  
20. 310-1898 [1] CLIP (LADDER)  
21. 352-3964 [2] CLIP (LADDER)  
22. 4P-8134 [1] CLIP (LADDER)  
23. 5C-2890 M [1] NUT (M6X1-THD)  
24. 5C-8312 M [4] NUT (M4X0.7-THD)  
25. 5C-9553 M [6] BOLT (M6X1X16-MM)  
26. 5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
27. 5P-7464 [1] CLIP (SLOT)  
28. 5P-7465 [1] CLIP (TAB)  
29. 6V-9672 M [4] SCREW-MACHINE (M4X0.7X16-MM)  
30. 7C-4354 [1] CLIP  
31. 8T-2920 [1] GROMMET (27-MM ID)  
32. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
34. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
35. 8T-4138 M [2] BOLT (M6X1X20-MM)  
36. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
37. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
38. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
39. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
40. 8T-4200 M [6] BOLT (M8X1.25X16-MM)  
41. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
42. 8T-4224 [9] WASHER-HARD (8.8X16X2-MM THK)  
43. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
44. 8T-4971 M [1] BOLT (M6X1X30-MM)  
45. 9X-8256 [9] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00712060127
 

505-8062: WIRING GP-ENGINE

505-8062 WIRING GP-ENGINE -CAB
PART OF 505-5975, 505-5976, 505-5979, 505-5980 CAB AR
Type 2
AN ATTACHMENT
i07313475 M0071206
5058062 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 304E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 370-5367 [1] STRAP AS-GROUND  
2. 3S-2093 C [13] STRAP-CABLE  
3. 7K-1181 C [16] STRAP-CABLE  
4. 266-7379 [1] STRAP-CABLE  
5. 267-4211 [1] SPACER (8.8X16X15-MM THK)  
6. 416-4218 Y [1] HARNESS AS-WIRING (CAN DATA LINK)  
7. 465-6073 [1] BRACKET  
8. 465-6074 [1] BRACKET  
9. 471-5195 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
10. 477-1182 [1] BRACKET AS  
11. 542-8809 CY [1] HARNESS AS-ENGINE  
12. 096-2626 [1] CLIP  
13. 096-6166 [8] WASHER-HARD (4.5X9X1-MM THK)  
14. 127-4839 M [1] BOLT (M10X1.25X25-MM)  
15. 132-5789 [4] CLIP (LADDER)  
16. 132-7551 [1] SPACER (11X19X6-MM THK)  
17. 150-3715 M [2] BOLT (M12X1.25X25-MM)  
18. 156-6175 [7] CLIP (LADDER)  
19. 204-1611 [2] STRAP (DUAL)  
20. 310-1898 [1] CLIP (LADDER)  
21. 352-3964 [2] CLIP (LADDER)  
22. 4P-8134 [1] CLIP (LADDER)  
23. 5C-2890 M [1] NUT (M6X1-THD)  
24. 5C-8312 M [4] NUT (M4X0.7-THD)  
25. 5C-9553 M [6] BOLT (M6X1X16-MM)  
26. 5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
27. 5P-7464 [1] CLIP (SLOT)  
28. 5P-7465 [1] CLIP (TAB)  
29. 6V-9672 M [4] SCREW-MACHINE (M4X0.7X16-MM)  
30. 7C-4354 [1] CLIP  
31. 8T-2920 [1] GROMMET (27-MM ID)  
32. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
34. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
35. 8T-4138 M [2] BOLT (M6X1X20-MM)  
36. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
37. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
38. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
39. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
40. 8T-4200 M [6] BOLT (M8X1.25X16-MM)  
41. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
42. 8T-4224 [9] WASHER-HARD (8.8X16X2-MM THK)  
43. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
44. 8T-4971 M [1] BOLT (M6X1X30-MM)  
45. 9X-8256 [9] WASHER (6.6X12X2-MM THK)  
46. 326-9726 C [1] BASE-MOUNTING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00712060128
 

505-8063: WIRING GP-ENGINE

505-8063 WIRING GP-ENGINE -CANOPY
PART OF 505-5967, 505-5968, 505-5971, 505-5972 CANOPY AR
Type 1
AN ATTACHMENT
i06692424 M0071206
5058063 WIRING GP-ENGINE Parts scheme 5058063 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 304E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 370-5367 [1] STRAP AS-GROUND  
2. 3S-2093 [11] STRAP-CABLE  
3. 7K-1181 [16] STRAP-CABLE  
4. 266-7379 [1] STRAP-CABLE  
5. 267-4211 [1] SPACER (8.8X16X15-MM THK)  
6. 416-4218 Y [1] HARNESS AS-WIRING (CAN DATA LINK)  
7. 465-6073 [1] BRACKET  
8. 465-6074 [1] BRACKET  
9. 471-5195 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
10. 477-1182 [1] BRACKET AS  
11. 505-8096 Y [1] HARNESS AS-ENGINE  
12. 096-2626 [1] CLIP  
13. 096-6166 [8] WASHER-HARD (4.5X9X1-MM THK)  
14. 127-4839 M [1] BOLT (M10X1.25X25-MM)  
15. 132-5789 [4] CLIP (LADDER)  
16. 132-7551 [1] SPACER (11X19X6-MM THK)  
17. 150-3715 M [2] BOLT (M12X1.25X25-MM)  
18. 156-6175 [7] CLIP (LADDER)  
19. 204-1611 [1] STRAP (DUAL)  
20. 310-1898 [1] CLIP (LADDER)  
21. 352-3964 [1] CLIP (LADDER)  
22. 4P-7581 [1] CLIP (LADDER)  
23. 4P-8134 [1] CLIP (LADDER)  
24. 5C-2890 M [1] NUT (M6X1-THD)  
25. 5C-8312 M [4] NUT (M4X0.7-THD)  
26. 5C-9553 M [6] BOLT (M6X1X16-MM)  
27. 5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
28. 5P-7464 [1] CLIP (SLOT)  
29. 5P-7465 [1] CLIP (TAB)  
30. 6V-9672 M [4] SCREW-MACHINE (M4X0.7X16-MM)  
31. 7C-4354 [1] CLIP  
32. 8T-2920 [1] GROMMET (27-MM ID)  
33. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
34. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
35. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
36. 8T-4138 M [2] BOLT (M6X1X20-MM)  
37. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
38. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
39. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
40. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
41. 8T-4200 M [6] BOLT (M8X1.25X16-MM)  
42. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4224 [9] WASHER-HARD (8.8X16X2-MM THK)  
44. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
45. 8T-4971 M [1] BOLT (M6X1X30-MM)  
46. 9X-8256 [9] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00712060129
 

505-8063: WIRING GP-ENGINE

505-8063 WIRING GP-ENGINE -CANOPY
PART OF 505-5967, 505-5968, 505-5971, 505-5972 CANOPY AR
Type 2
AN ATTACHMENT
i07313487 M0071206
5058063 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 304E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 370-5367 [1] STRAP AS-GROUND  
2. 3S-2093 C [13] STRAP-CABLE  
3. 7K-1181 C [17] STRAP-CABLE  
4. 266-7379 C [2] STRAP-CABLE  
5. 267-4211 [1] SPACER (8.8X16X15-MM THK)  
6. 416-4218 Y [1] HARNESS AS-WIRING (CAN DATA LINK)  
7. 465-6073 [1] BRACKET  
8. 465-6074 [1] BRACKET  
9. 471-5195 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
10. 477-1182 [1] BRACKET AS  
11. 542-8809 CY [1] HARNESS AS-ENGINE  
12. 096-2626 [1] CLIP  
13. 096-6166 [8] WASHER-HARD (4.5X9X1-MM THK)  
14. 127-4839 M [1] BOLT (M10X1.25X25-MM)  
15. 132-5789 [4] CLIP (LADDER)  
16. 132-7551 [1] SPACER (11X19X6-MM THK)  
17. 150-3715 M [2] BOLT (M12X1.25X25-MM)  
18. 156-6175 [7] CLIP (LADDER)  
19. 204-1611 [1] STRAP (DUAL)  
20. 310-1898 [1] CLIP (LADDER)  
21. 352-3964 [1] CLIP (LADDER)  
22. 4P-7581 [1] CLIP (LADDER)  
23. 4P-8134 [1] CLIP (LADDER)  
24. 5C-2890 M [1] NUT (M6X1-THD)  
25. 5C-8312 M [4] NUT (M4X0.7-THD)  
26. 5C-9553 M [6] BOLT (M6X1X16-MM)  
27. 5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
28. 5P-7464 [1] CLIP (SLOT)  
29. 5P-7465 [1] CLIP (TAB)  
30. 6V-9672 M [4] SCREW-MACHINE (M4X0.7X16-MM)  
31. 7C-4354 [1] CLIP  
32. 8T-2920 [1] GROMMET (27-MM ID)  
33. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
34. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
35. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
36. 8T-4138 M [2] BOLT (M6X1X20-MM)  
37. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
38. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
39. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
40. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
41. 8T-4200 M [6] BOLT (M8X1.25X16-MM)  
42. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4224 [9] WASHER-HARD (8.8X16X2-MM THK)  
44. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
45. 8T-4971 M [1] BOLT (M6X1X30-MM)  
46. 9X-8256 [9] WASHER (6.6X12X2-MM THK)  
47. 326-9726 C [1] BASE-MOUNTING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Battery - Recycle
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators
Battery or Battery Cable - Inspect/Replace
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators
Battery Disconnect Switch - If Equipped
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators
Fuses - Replace
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Installation Procedure for Key Box Kit on Certain Mini Hydraulic Excavators {1408, 5258, 7301}
Installation Procedure for Key Box Kit on Certain Mini Hydraulic Excavators {1408, 5258, 7301}
Technical Information Bulletin
Service Hour Meter Malfunctions on Mini Hydraulic Excavators Equipped with a Canopy {1408, 7301}
Service Hour Meter Malfunctions on Mini Hydraulic Excavators Equipped with a Canopy {1408, 7301}
Systems Operation
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Troubleshooting
Electrical Connectors
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Relay - Test - ECM Main Relay
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Service Magazine
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
An Improved Service Meter Kit Is Now Used on Certain Mini Hydraulic Excavators {1408, 7301}
An Improved Service Meter Kit Is Now Used on Certain Mini Hydraulic Excavators {1408, 7301}
Installation Procedure for the Key Box Kit Is Now Available on Certain Mini Hydraulic Excavators {1408, 5258, 7301}
Installation Procedure for the Key Box Kit Is Now Available on Certain Mini Hydraulic Excavators {1408, 5258, 7301}
A New Service Meter Kit Is Now Used On Certain Mini Hydraulic Excavators {1408, 7301}
A New Service Meter Kit Is Now Used On Certain Mini Hydraulic Excavators {1408, 7301}

Caterpillar Parts SIS Catalog 304E2 CR :

WIRING GP-CONSOLE
505-8070 WIRING GP-CONSOLE
WIRING GP-CONSOLE
505-8070 WIRING GP-CONSOLE
WIRING GP-COMMUNICATION
505-8099 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
505-8097 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
505-8097 WIRING GP-COMMUNICATION
WIRING GP-BOOM
398-5862 WIRING GP-BOOM
SWITCH GP-ROTARY
319-4420 SWITCH GP-ROTARY
SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT
WIRING GP-CONSOLE
505-8071 WIRING GP-CONSOLE
WIRING GP-CONSOLE
505-8072 WIRING GP-CONSOLE
WIRING GP-CONSOLE
505-8072 WIRING GP-CONSOLE
WIRING GP-CONSOLE
505-8073 WIRING GP-CONSOLE
WIRING GP-CONSOLE
505-8073 WIRING GP-CONSOLE
WIRING GP-ENGINE
505-8062 WIRING GP-ENGINE
WIRING GP-ENGINE
505-8062 WIRING GP-ENGINE
WIRING GP-ENGINE
505-8063 WIRING GP-ENGINE
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.