AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

505-8075 WIRING GP-CONSOLE -CANOPY S/N SHW1-UP PART OF 506-3791, 506-3807 CANOPY AR Type 2 AN ATTACHMENT 305.5E2 CR


ELECTRICAL AND STARTING SYSTEM
WIRING GP

MINI HYD EXCAVATOR 305.5E2 CR MINI HYD EXCAVATOR HRX
 305.5E2CR Mini Hydraulic Excavator HRX00001-UP (MACHINE) POWERED BY C2.4 Engine M0071210 305.5E2 CR HRX   (2016)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CONSOLE
505-8074 WIRING GP-CONSOLE
WIRING GP-CONSOLE
505-8075 WIRING GP-CONSOLE
WIRING GP-CONSOLE
505-8075 WIRING GP-CONSOLE
WIRING GP-CONSOLE
505-8076 WIRING GP-CONSOLE
WIRING GP-CONSOLE
505-8076 WIRING GP-CONSOLE
WIRING GP-CONSOLE
505-8077 WIRING GP-CONSOLE
 

#M00712100120
 

505-8075: WIRING GP-CONSOLE

505-8075 WIRING GP-CONSOLE -CANOPY
S/N SHW1-UP
PART OF 506-3791, 506-3807 CANOPY AR
Type 2
AN ATTACHMENT
i07271092 M0071210
5058075 WIRING GP-CONSOLE Parts scheme 5058075 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 305.5E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [25] STRAP-CABLE  
2. 7K-1181 [31] STRAP-CABLE  
3. 8X-5804 [1] STRAP AS-GROUND  
4. 109-2356 [5] PLUG  
5. 110-6109 [1] KNOB-CONTROL (THROTTLE)  
6. 113-8490 [1] FUSE (10-AMPERE)  
7. 113-8492 [1] FUSE (20-AMPERE)  
8. 116-7471 [1] PULLER-MINIFUSE  
9. 124-3548 [1] FUSE (30-AMPERE)  
10. 140-9378 [1] RELAY AS (12-VOLT)(HORN)  
10A. 140-9378 [1] RELAY AS (12-VOLT)(PATTERN CHANGE)  
10B. 140-9378 [1] RELAY AS (12-VOLT)(FAULT ALARM)  
10C. 140-9378 [1] RELAY AS (12-VOLT)(SERVICE METER)  
10D. 140-9378 [1] RELAY AS (12-VOLT)(FLOODLIGHTS)  
10E. 140-9378 [1] RELAY AS (12-VOLT)(HEADLIGHTS)  
10F. 140-9378 [1] RELAY AS (12-VOLT)(COURTESY LAMP)  
10G. 140-9378 [1] RELAY AS (12-VOLT)(TRAVEL SPEED)  
11. 141-2759 [1] FUSE (5-AMPERE)  
12. 163-6795 [3] STRAP-CABLE  
13. 214-6197 [2] PLUG  
14. 231-9633 [1] RESISTOR AS (TRAVEL SPEED)  
15. 266-1404 [1] SWITCH AS-ROCKER (12-VOLT)(LIGHT)  
  111-7899 [1] GASKET  
16. 266-6935 [1] RELAY AS (12-VOLT)(ENGINE START, SHUTOFF)  
17. 266-7379 [2] STRAP-CABLE  
18. 267-7058 [1] SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
19. 298-0663 [1] CLIP (LADDER)  
20. 306-9039 [1] COVER AS-PROTECTION  
21. 319-4420 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
22. 322-8964 [1] SWITCH AS-START (KEY)(ENGINE)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
23. 362-3225 [1] SWITCH AS-PRESSURE (TRAVEL)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
24. 364-3882 [1] BUZZER (12-VOLT)  
25. 542-8884 [1] METER AS  
  366-4622 [1] KIT-SERVICE METER (32-VOLT DC)  
    (INCLUDES SERVICE METER & FILM)
26. 367-6419 [1] HOLDER-FUSE  
27. 370-5354 [1] PLATE AS  
28. 392-2830 [1] PLATE AS  
29. 445-0000 Y [1] ELECTRONICS GP-MONITOR (CAB CONSOLE)  
30. 464-1212 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
31. 479-4292 [1] GROMMET  
32. 542-8808 CY [1] HARNESS AS-CHASSIS (MAIN)  
33. 505-8111 [1] COVER  
34. 095-0742 M [2] SCREW-MACHINE (M6X1X16-MM)  
35. 096-6166 [1] WASHER-HARD (4.5X9X1-MM THK)  
36. 132-5789 [2] CLIP (LADDER)  
37. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
38. 3J-1907 [1] SEAL-O-RING  
39. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
40. 4P-7581 [1] CLIP (LADDER)  
41. 5C-9553 M [4] BOLT (M6X1X16-MM)  
42. 6V-5210 M [1] SCREW-MACHINE (M4X0.7X10-MM)  
43. 6V-9671 M [1] SCREW-MACHINE (M3X0.5X12-MM)  
44. 7I-2272 M [1] BOLT (M5X0.8X12-MM)  
45. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
46. 8T-2658 M [1] LOCKNUT (M3X0.5-THD)  
47. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
48. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
49. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
50. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
51. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
52. 8T-4970 M [1] BOLT (M6X1X14-MM)  
53. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
54. 9X-8256 [5] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00712100121
 

505-8076: WIRING GP-CONSOLE

505-8076 WIRING GP-CONSOLE -CAB
S/N HRX1-UP
CRANE
PART OF 506-3819, 506-3820 CAB AR
Type 1
AN ATTACHMENT
i06681964 M0071210
5058076 WIRING GP-CONSOLE Parts scheme 5058076 WIRING GP-CONSOLE Parts scheme 5058076 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 305.5E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [19] STRAP-CABLE  
2. 7K-1181 [39] STRAP-CABLE  
3. 8X-5804 [1] STRAP AS-GROUND  
4. 109-2356 [4] PLUG  
5. 110-6109 [1] KNOB-CONTROL (THROTTLE)  
6. 113-8490 [1] FUSE (10-AMPERE)  
7. 113-8492 [1] FUSE (20-AMPERE)  
8. 116-7471 [1] PULLER-MINIFUSE  
9. 124-3548 [1] FUSE (30-AMPERE)  
10. 140-9378 [1] RELAY AS (12-VOLT)(HORN)  
10A. 140-9378 [1] RELAY AS (12-VOLT)(PATTERN CHANGE)  
10B. 140-9378 [1] RELAY AS (12-VOLT)(FAULT ALARM)  
10C. 140-9378 [1] RELAY AS (12-VOLT)(SERVICE METER)  
10D. 140-9378 [1] RELAY AS (12-VOLT)(FLOODLIGHTS)  
10E. 140-9378 [1] RELAY AS (12-VOLT)(HEADLIGHTS)  
10F. 140-9378 [1] RELAY AS (12-VOLT)(COURTESY LAMP)  
10G. 140-9378 [1] RELAY AS (12-VOLT)(TRAVEL SPEED)  
10H. 140-9378 [1] RELAY AS (12-VOLT)(SAFETY)  
10J. 140-9378 [1] RELAY AS (12-VOLT)(WARNING LIGHT)  
11. 141-2759 [1] FUSE (5-AMPERE)  
12. 158-7802 [1] SWITCH AS-ROCKER (WINDOW WASHER, WIPER)  
  111-7899 [1] GASKET  
13. 163-6795 [3] STRAP-CABLE  
14. 231-9633 [2] RESISTOR AS (TRAVEL SPEED)  
15. 266-1404 [1] SWITCH AS-ROCKER (12-VOLT)(LIGHT)  
  111-7899 [1] GASKET  
16. 266-6935 [1] RELAY AS (12-VOLT)(ENGINE START, SHUTOFF)  
17. 266-7379 [3] STRAP-CABLE  
18. 267-7058 [1] SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)  
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
19. 276-2332 [1] SWITCH AS-TOGGLE (LOCAL/REMOTE THROTTLE)  
20. 298-0663 [1] CLIP (LADDER)  
21. 319-4420 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
22. 322-8964 [1] SWITCH AS-START (KEY)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
23. 362-3225 [1] SWITCH AS-PRESSURE (TRAVEL)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
24. 364-3882 [1] BUZZER (12-VOLT)  
25. 366-4622 [1] KIT-SERVICE METER (32-VOLT DC)  
  114-2505 [1] FILM-IDENTIFICATION (SERVICE METER)  
26. 367-6419 [1] HOLDER-FUSE  
27. 370-5354 [1] PLATE AS  
28. 392-2830 [1] PLATE AS  
29. 437-4852 [1] COVER  
30. 437-4853 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  9X-2032 M [1] NUT-WELD (M4X0.7-THD)  
31. 445-0000 Y [1] ELECTRONICS GP-MONITOR  
32. 458-0723 Y [1] HARNESS AS-LIGHTING  
33. 464-1212 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
34. 479-4292 [1] GROMMET  
35. 505-8094 Y [1] HARNESS AS-CONSOLE (MAIN)  
36. 505-8095 Y [1] HARNESS AS-CONSOLE (CRANE)  
37. 095-0723 M [1] SCREW-SPECIAL (M3X0.5X10-MM)  
38. 095-0742 M [2] SCREW-MACHINE (M6X1X16-MM)  
39. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
40. 132-5789 [2] CLIP (LADDER)  
41. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
42. 204-1611 [2] STRAP (DUAL)  
43. 3J-1907 [1] SEAL-O-RING  
44. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
45. 5C-9553 M [6] BOLT (M6X1X16-MM)  
46. 6V-5210 M [1] SCREW-MACHINE (M4X0.7X10-MM)  
47. 7I-2272 M [1] BOLT (M5X0.8X12-MM)  
48. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
49. 8T-0337 M [1] SCREW-MACHINE (M4X0.7X12-MM)  
50. 8T-2658 M [1] LOCKNUT (M3X0.5-THD)  
51. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
52. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
53. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
54. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
55. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
56. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
57. 8T-4970 M [1] BOLT (M6X1X14-MM)  
58. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
59. 9X-8256 [7] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00712100122
 

505-8076: WIRING GP-CONSOLE

505-8076 WIRING GP-CONSOLE -CAB
S/N HRX1-UP
CRANE
PART OF 506-3819, 506-3820 CAB AR
Type 2
AN ATTACHMENT
i07271035 M0071210
5058076 WIRING GP-CONSOLE Parts scheme 5058076 WIRING GP-CONSOLE Parts scheme 5058076 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 305.5E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [19] STRAP-CABLE  
2. 7K-1181 [39] STRAP-CABLE  
3. 8X-5804 [1] STRAP AS-GROUND  
4. 109-2356 [4] PLUG  
5. 110-6109 [1] KNOB-CONTROL (THROTTLE)  
6. 113-8490 [1] FUSE (10-AMPERE)  
7. 113-8492 [1] FUSE (20-AMPERE)  
8. 116-7471 [1] PULLER-MINIFUSE  
9. 124-3548 [1] FUSE (30-AMPERE)  
10. 140-9378 [1] RELAY AS (12-VOLT)(HORN)  
10A. 140-9378 [1] RELAY AS (12-VOLT)(PATTERN CHANGE)  
10B. 140-9378 [1] RELAY AS (12-VOLT)(FAULT ALARM)  
10C. 140-9378 [1] RELAY AS (12-VOLT)(SERVICE METER)  
10D. 140-9378 [1] RELAY AS (12-VOLT)(FLOODLIGHTS)  
10E. 140-9378 [1] RELAY AS (12-VOLT)(HEADLIGHTS)  
10F. 140-9378 [1] RELAY AS (12-VOLT)(COURTESY LAMP)  
10G. 140-9378 [1] RELAY AS (12-VOLT)(TRAVEL SPEED)  
10H. 140-9378 [1] RELAY AS (12-VOLT)(SAFETY)  
10J. 140-9378 [1] RELAY AS (12-VOLT)(WARNING LIGHT)  
11. 141-2759 [1] FUSE (5-AMPERE)  
12. 158-7802 [1] SWITCH AS-ROCKER (WINDOW WASHER, WIPER)  
  111-7899 [1] GASKET  
13. 163-6795 [3] STRAP-CABLE  
14. 231-9633 [2] RESISTOR AS (TRAVEL SPEED)  
15. 266-1404 [1] SWITCH AS-ROCKER (12-VOLT)(LIGHT)  
  111-7899 [1] GASKET  
16. 266-6935 [1] RELAY AS (12-VOLT)(ENGINE START, SHUTOFF)  
17. 266-7379 [3] STRAP-CABLE  
18. 267-7058 [1] SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
19. 276-2332 [1] SWITCH AS-TOGGLE (THROTTLE CONTROL)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
20. 298-0663 [1] CLIP (LADDER)  
21. 319-4420 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
22. 322-8964 [1] SWITCH AS-START (KEY)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
23. 362-3225 [1] SWITCH AS-PRESSURE (TRAVEL)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
24. 364-3882 [1] BUZZER (12-VOLT)  
25. 542-8884 [1] METER AS  
  366-4622 [1] KIT-SERVICE METER (32-VOLT DC)  
    (INCLUDES SERVICE METER & FILM)
26. 367-6419 [1] HOLDER-FUSE  
27. 370-5354 [1] PLATE AS  
28. 392-2830 [1] PLATE AS  
29. 437-4852 [1] COVER  
30. 437-4853 [1] BRACKET AS  
31. 445-0000 Y [1] ELECTRONICS GP-MONITOR (CAB CONSOLE)  
32. 458-0723 Y [1] HARNESS AS-LIGHTING (CRANE)  
33. 464-1212 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
34. 479-4292 [1] GROMMET  
35. 542-8808 CY [1] HARNESS AS-CHASSIS (MAIN)  
36. 505-8095 Y [1] HARNESS AS-CONSOLE (CRANE)  
37. 095-0723 M [1] SCREW-SPECIAL (M3X0.5X10-MM)  
38. 095-0742 M [2] SCREW-MACHINE (M6X1X16-MM)  
39. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
40. 132-5789 [2] CLIP (LADDER)  
41. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
42. 204-1611 [2] STRAP (DUAL)  
43. 3J-1907 [1] SEAL-O-RING  
44. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
45. 5C-9553 M [6] BOLT (M6X1X16-MM)  
46. 6V-5210 M [1] SCREW-MACHINE (M4X0.7X10-MM)  
47. 7I-2272 M [1] BOLT (M5X0.8X12-MM)  
48. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
49. 8T-0337 M [1] SCREW-MACHINE (M4X0.7X12-MM)  
50. 8T-2658 M [1] LOCKNUT (M3X0.5-THD)  
51. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
52. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
53. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
54. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
55. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
56. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
57. 8T-4970 M [1] BOLT (M6X1X14-MM)  
58. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
59. 9X-8256 [7] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00712100123
 

505-8077: WIRING GP-CONSOLE

505-8077 WIRING GP-CONSOLE -CANOPY
S/N HRX1-UP
CRANE
PART OF 506-3809, 506-5022 CANOPY AR
Type 1
AN ATTACHMENT
i06681647 M0071210
5058077 WIRING GP-CONSOLE Parts scheme 5058077 WIRING GP-CONSOLE Parts scheme 5058077 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 305.5E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [18] STRAP-CABLE  
2. 7K-1181 [40] STRAP-CABLE  
3. 8X-5804 [1] STRAP AS-GROUND  
4. 109-2356 [5] PLUG  
5. 110-6109 [1] KNOB-CONTROL (THROTTLE)  
6. 113-8490 [1] FUSE (10-AMPERE)  
7. 113-8492 [1] FUSE (20-AMPERE)  
8. 116-7471 [1] PULLER-MINIFUSE  
9. 124-3548 [1] FUSE (30-AMPERE)  
10. 140-9378 [1] RELAY AS (12-VOLT)(HORN)  
10A. 140-9378 [1] RELAY AS (12-VOLT)(PATTERN CHANGE)  
10B. 140-9378 [1] RELAY AS (12-VOLT)(FAULT ALARM)  
10C. 140-9378 [1] RELAY AS (12-VOLT)(SERVICE METER)  
10D. 140-9378 [1] RELAY AS (12-VOLT)(FLOODLIGHTS)  
10E. 140-9378 [1] RELAY AS (12-VOLT)(HEADLIGHTS)  
10F. 140-9378 [1] RELAY AS (12-VOLT)(COURTESY LAMP)  
10G. 140-9378 [1] RELAY AS (12-VOLT)(TRAVEL SPEED)  
10H. 140-9378 [1] RELAY AS (12-VOLT)(SAFETY)  
11. 141-2759 [1] FUSE (5-AMPERE)  
12. 163-6795 [3] STRAP-CABLE  
13. 231-9633 [2] RESISTOR AS (TRAVEL SPEED)  
14. 266-1404 [1] SWITCH AS-ROCKER (12-VOLT)(LIGHT)  
  111-7899 [1] GASKET  
15. 266-6935 [1] RELAY AS (12-VOLT)(ENGINE START, SHUTOFF)  
16. 266-7379 [2] STRAP-CABLE  
17. 267-7058 [1] SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
18. 276-2332 [1] SWITCH AS-TOGGLE (LOCAL/REMOTE THROTTLE)  
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
19. 298-0663 [1] CLIP (LADDER)  
20. 306-9039 [1] COVER AS-PROTECTION  
21. 319-4420 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
22. 322-8964 [1] SWITCH AS-START (KEY)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
23. 362-3225 [1] SWITCH AS-PRESSURE (TRAVEL)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
24. 364-3882 [1] BUZZER (12-VOLT)  
25. 366-4622 [1] KIT-SERVICE METER (32-VOLT DC)  
    (INCLUDES SERVICE METER & FILM)
26. 367-6419 [1] HOLDER-FUSE  
27. 370-5354 [1] PLATE AS  
28. 392-2830 [1] PLATE AS  
29. 437-4852 [1] COVER  
30. 437-4853 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  9X-2032 M [1] NUT-WELD (M4X0.7-THD)  
  [1] BRACKET  
31. 445-0000 Y [1] ELECTRONICS GP-MONITOR  
32. 464-1212 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
33. 479-4292 [1] GROMMET  
34. 505-8094 Y [1] HARNESS AS-CONSOLE (MAIN)  
35. 505-8095 Y [1] HARNESS AS-CONSOLE (CRANE)  
36. 505-8111 [1] COVER  
37. 095-0742 M [2] SCREW-MACHINE (M6X1X16-MM)  
38. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
39. 132-5789 [2] CLIP (LADDER)  
40. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
41. 3J-1907 [1] SEAL-O-RING  
42. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
43. 4P-7581 [1] CLIP (LADDER)  
44. 5C-9553 M [6] BOLT (M6X1X16-MM)  
45. 6V-5210 M [1] SCREW-MACHINE (M4X0.7X10-MM)  
46. 6V-9671 M [1] SCREW-MACHINE (M3X0.5X12-MM)  
47. 7I-2272 M [1] BOLT (M5X0.8X12-MM)  
48. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
49. 8T-0337 M [1] SCREW-MACHINE (M4X0.7X12-MM)  
50. 8T-2658 M [1] LOCKNUT (M3X0.5-THD)  
51. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
52. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
53. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
54. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
55. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
56. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
57. 8T-4970 M [1] BOLT (M6X1X14-MM)  
58. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
59. 9X-8256 [7] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00712100124
 

505-8077: WIRING GP-CONSOLE

505-8077 WIRING GP-CONSOLE -CANOPY
S/N HRX1-UP
CRANE
PART OF 506-3809, 506-5022 CANOPY AR
Type 2
AN ATTACHMENT
i07271093 M0071210
5058077 WIRING GP-CONSOLE Parts scheme 5058077 WIRING GP-CONSOLE Parts scheme 5058077 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 305.5E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [18] STRAP-CABLE  
2. 7K-1181 [40] STRAP-CABLE  
3. 8X-5804 [1] STRAP AS-GROUND  
4. 109-2356 [5] PLUG  
5. 110-6109 [1] KNOB-CONTROL (THROTTLE)  
6. 113-8490 [1] FUSE (10-AMPERE)  
7. 113-8492 [1] FUSE (20-AMPERE)  
8. 116-7471 [1] PULLER-MINIFUSE  
9. 124-3548 [1] FUSE (30-AMPERE)  
10. 140-9378 [1] RELAY AS (12-VOLT)(HORN)  
10A. 140-9378 [1] RELAY AS (12-VOLT)(PATTERN CHANGE)  
10B. 140-9378 [1] RELAY AS (12-VOLT)(FAULT ALARM)  
10C. 140-9378 [1] RELAY AS (12-VOLT)(SERVICE METER)  
10D. 140-9378 [1] RELAY AS (12-VOLT)(FLOODLIGHTS)  
10E. 140-9378 [1] RELAY AS (12-VOLT)(HEADLIGHTS)  
10F. 140-9378 [1] RELAY AS (12-VOLT)(COURTESY LAMP)  
10G. 140-9378 [1] RELAY AS (12-VOLT)(TRAVEL SPEED)  
10H. 140-9378 [1] RELAY AS (12-VOLT)(SAFETY)  
11. 141-2759 [1] FUSE (5-AMPERE)  
12. 163-6795 [3] STRAP-CABLE  
13. 231-9633 [2] RESISTOR AS (TRAVEL SPEED)  
14. 266-1404 [1] SWITCH AS-ROCKER (12-VOLT)(LIGHT)  
  111-7899 [1] GASKET  
15. 266-6935 [1] RELAY AS (12-VOLT)(ENGINE START, SHUTOFF)  
16. 266-7379 [2] STRAP-CABLE  
17. 267-7058 [1] SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
18. 276-2332 [1] SWITCH AS-TOGGLE (LOCAL/REMOTE THROTTLE)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
19. 298-0663 [1] CLIP (LADDER)  
20. 306-9039 [1] COVER AS-PROTECTION  
21. 319-4420 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
22. 322-8964 [1] SWITCH AS-START (KEY)(ENGINE)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
23. 362-3225 [1] SWITCH AS-PRESSURE (TRAVEL)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
24. 364-3882 [1] BUZZER (12-VOLT)  
25. 542-8884 [1] METER AS  
  366-4622 [1] KIT-SERVICE METER (32-VOLT DC)  
    (INCLUDES SERVICE METER & FILM)
26. 367-6419 [1] HOLDER-FUSE  
27. 370-5354 [1] PLATE AS  
28. 392-2830 [1] PLATE AS  
29. 437-4852 [1] COVER  
30. 437-4853 [1] BRACKET AS  
31. 445-0000 Y [1] ELECTRONICS GP-MONITOR (CAB CONSOLE)  
32. 464-1212 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
33. 479-4292 [1] GROMMET  
34. 542-8808 CY [1] HARNESS AS-CHASSIS (MAIN)  
35. 505-8095 Y [1] HARNESS AS-CONSOLE (CRANE)  
36. 505-8111 [1] COVER  
37. 095-0742 M [2] SCREW-MACHINE (M6X1X16-MM)  
38. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
39. 132-5789 [2] CLIP (LADDER)  
40. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
41. 3J-1907 [1] SEAL-O-RING  
42. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
43. 4P-7581 [1] CLIP (LADDER)  
44. 5C-9553 M [6] BOLT (M6X1X16-MM)  
45. 6V-5210 M [1] SCREW-MACHINE (M4X0.7X10-MM)  
46. 6V-9671 M [1] SCREW-MACHINE (M3X0.5X12-MM)  
47. 7I-2272 M [1] BOLT (M5X0.8X12-MM)  
48. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
49. 8T-0337 M [1] SCREW-MACHINE (M4X0.7X12-MM)  
50. 8T-2658 M [1] LOCKNUT (M3X0.5-THD)  
51. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
52. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
53. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
54. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
55. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
56. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
57. 8T-4970 M [1] BOLT (M6X1X14-MM)  
58. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
59. 9X-8256 [7] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00712100125
 

505-8064: WIRING GP-ENGINE

505-8064 WIRING GP-ENGINE -CAB
PART OF 506-3798, 506-3803, 506-3819, 506-3820 CAB AR
Type 1
AN ATTACHMENT
i06749514 M0071210
5058064 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 305.5E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 370-5367 [1] STRAP AS-GROUND  
2. 3S-2093 [14] STRAP-CABLE  
3. 7K-1181 [15] STRAP-CABLE  
4. 266-7379 [2] STRAP-CABLE  
5. 267-4211 [1] SPACER (8.8X16X15-MM THK)  
6. 326-9726 [1] BASE-MOUNTING  
7. 416-4218 Y [1] HARNESS AS-WIRING (CAN DATA LINK)  
8. 465-6073 [1] BRACKET  
9. 465-6074 [1] BRACKET  
10. 471-5195 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
11. 477-1182 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
12. 505-8096 Y [1] HARNESS AS-ENGINE  
13. 096-2626 [1] CLIP  
14. 096-6166 [8] WASHER-HARD (4.5X9X1-MM THK)  
15. 127-4839 M [1] BOLT (M10X1.25X25-MM)  
16. 132-5789 [4] CLIP (LADDER)  
17. 132-7551 [1] SPACER (11X19X6-MM THK)  
18. 150-3715 M [2] BOLT (M12X1.25X25-MM)  
19. 156-6175 [7] CLIP (LADDER)  
20. 204-1611 [2] STRAP (DUAL)  
21. 310-1898 [1] CLIP (LADDER)  
22. 352-3964 [1] CLIP (LADDER)  
23. 4P-7581 [1] CLIP (LADDER)  
24. 4P-8134 [1] CLIP (LADDER)  
25. 5C-2890 M [1] NUT (M6X1-THD)  
26. 5C-8312 M [4] NUT (M4X0.7-THD)  
27. 5C-9553 M [6] BOLT (M6X1X16-MM)  
28. 5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
29. 5P-7464 [1] CLIP (SLOT)  
30. 5P-7465 [1] CLIP (TAB)  
31. 6V-9672 M [4] SCREW-MACHINE (M4X0.7X16-MM)  
32. 7C-4354 [1] CLIP  
33. 8T-2920 [1] GROMMET (27-MM ID)  
34. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
36. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
37. 8T-4138 M [2] BOLT (M6X1X20-MM)  
38. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
39. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
40. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
41. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
42. 8T-4200 M [6] BOLT (M8X1.25X16-MM)  
43. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
44. 8T-4224 [9] WASHER-HARD (8.8X16X2-MM THK)  
45. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
46. 8T-4971 M [1] BOLT (M6X1X30-MM)  
47. 9X-8256 [9] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00712100126
 

505-8064: WIRING GP-ENGINE

505-8064 WIRING GP-ENGINE -CAB
PART OF 506-3798, 506-3803, 506-3819, 506-3820 CAB AR
Type 2
AN ATTACHMENT
i07313489 M0071210
5058064 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 305.5E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 370-5367 [1] STRAP AS-GROUND  
2. 3S-2093 C [15] STRAP-CABLE  
3. 7K-1181 C [16] STRAP-CABLE  
4. 266-7379 [2] STRAP-CABLE  
5. 267-4211 [1] SPACER (8.8X16X15-MM THK)  
6. 326-9726 C [2] BASE-MOUNTING  
7. 416-4218 Y [1] HARNESS AS-WIRING (CAN DATA LINK)  
8. 465-6073 [1] BRACKET  
9. 465-6074 [1] BRACKET  
10. 471-5195 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
11. 477-1182 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
12. 542-8809 CY [1] HARNESS AS-ENGINE  
13. 096-2626 [1] CLIP  
14. 096-6166 [8] WASHER-HARD (4.5X9X1-MM THK)  
15. 127-4839 M [1] BOLT (M10X1.25X25-MM)  
16. 132-5789 [4] CLIP (LADDER)  
17. 132-7551 [1] SPACER (11X19X6-MM THK)  
18. 150-3715 M [2] BOLT (M12X1.25X25-MM)  
19. 156-6175 [7] CLIP (LADDER)  
20. 204-1611 [2] STRAP (DUAL)  
21. 310-1898 [1] CLIP (LADDER)  
22. 352-3964 [1] CLIP (LADDER)  
23. 4P-7581 [1] CLIP (LADDER)  
24. 4P-8134 [1] CLIP (LADDER)  
25. 5C-2890 M [1] NUT (M6X1-THD)  
26. 5C-8312 M [4] NUT (M4X0.7-THD)  
27. 5C-9553 M [6] BOLT (M6X1X16-MM)  
28. 5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
29. 5P-7464 [1] CLIP (SLOT)  
30. 5P-7465 [1] CLIP (TAB)  
31. 6V-9672 M [4] SCREW-MACHINE (M4X0.7X16-MM)  
32. 7C-4354 [1] CLIP  
33. 8T-2920 [1] GROMMET (27-MM ID)  
34. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
36. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
37. 8T-4138 M [2] BOLT (M6X1X20-MM)  
38. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
39. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
40. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
41. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
42. 8T-4200 M [6] BOLT (M8X1.25X16-MM)  
43. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
44. 8T-4224 [9] WASHER-HARD (8.8X16X2-MM THK)  
45. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
46. 8T-4971 M [1] BOLT (M6X1X30-MM)  
47. 9X-8256 [9] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00712100127
 

505-8065: WIRING GP-ENGINE

505-8065 WIRING GP-ENGINE -CANOPY
PART OF 506-3791, 506-3807, 506-3809, 506-5022 CANOPY AR
Type 1
AN ATTACHMENT
i06681627 M0071210
5058065 WIRING GP-ENGINE Parts scheme 5058065 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 305.5E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 370-5367 [1] STRAP AS-GROUND  
2. 3S-2093 [10] STRAP-CABLE  
3. 7K-1181 [16] STRAP-CABLE  
4. 266-7379 [1] STRAP-CABLE  
5. 267-4211 [1] SPACER (8.8X16X15-MM THK)  
6. 416-4218 Y [1] HARNESS AS-WIRING (CAN DATA LINK)  
7. 465-6073 [1] BRACKET  
8. 465-6074 [1] BRACKET  
9. 471-5195 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
10. 477-1182 [1] BRACKET AS  
11. 505-8096 Y [1] HARNESS AS-ENGINE  
12. 096-2626 [1] CLIP  
13. 096-6166 [8] WASHER-HARD (4.5X9X1-MM THK)  
14. 127-4839 M [1] BOLT (M10X1.25X25-MM)  
15. 132-5789 [4] CLIP (LADDER)  
16. 132-7551 [1] SPACER (11X19X6-MM THK)  
17. 150-3715 M [2] BOLT (M12X1.25X25-MM)  
18. 156-6175 [7] CLIP (LADDER)  
19. 204-1611 [1] STRAP (DUAL)  
20. 310-1898 [1] CLIP (LADDER)  
21. 352-3964 [1] CLIP (LADDER)  
22. 4P-7581 [1] CLIP (LADDER)  
23. 4P-8134 [1] CLIP (LADDER)  
24. 5C-2890 M [1] NUT (M6X1-THD)  
25. 5C-8312 M [4] NUT (M4X0.7-THD)  
26. 5C-9553 M [6] BOLT (M6X1X16-MM)  
27. 5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
28. 5P-7464 [1] CLIP (SLOT)  
29. 5P-7465 [1] CLIP (TAB)  
30. 6V-9672 M [4] SCREW-MACHINE (M4X0.7X16-MM)  
31. 7C-4354 [1] CLIP  
32. 8T-2920 [1] GROMMET (27-MM ID)  
33. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
34. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
35. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
36. 8T-4138 M [2] BOLT (M6X1X20-MM)  
37. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
38. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
39. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
40. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
41. 8T-4200 M [6] BOLT (M8X1.25X16-MM)  
42. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4224 [9] WASHER-HARD (8.8X16X2-MM THK)  
44. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
45. 8T-4971 M [1] BOLT (M6X1X30-MM)  
46. 9X-8256 [9] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00712100128
 

505-8065: WIRING GP-ENGINE

505-8065 WIRING GP-ENGINE -CANOPY
PART OF 506-3791, 506-3807, 506-3809, 506-5022 CANOPY AR
Type 2
AN ATTACHMENT
i07313497 M0071210
5058065 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 305.5E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 370-5367 [1] STRAP AS-GROUND  
2. 3S-2093 C [12] STRAP-CABLE  
3. 7K-1181 C [17] STRAP-CABLE  
4. 266-7379 [1] STRAP-CABLE  
5. 267-4211 [1] SPACER (8.8X16X15-MM THK)  
6. 416-4218 Y [1] HARNESS AS-WIRING (CAN DATA LINK)  
7. 465-6073 [1] BRACKET  
8. 465-6074 [1] BRACKET  
9. 471-5195 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
10. 477-1182 [1] BRACKET AS  
11. 542-8809 CY [1] HARNESS AS-ENGINE  
12. 096-2626 [1] CLIP  
13. 096-6166 [8] WASHER-HARD (4.5X9X1-MM THK)  
14. 127-4839 M [1] BOLT (M10X1.25X25-MM)  
15. 132-5789 [4] CLIP (LADDER)  
16. 132-7551 [1] SPACER (11X19X6-MM THK)  
17. 150-3715 M [2] BOLT (M12X1.25X25-MM)  
18. 156-6175 [7] CLIP (LADDER)  
19. 204-1611 [1] STRAP (DUAL)  
20. 310-1898 [1] CLIP (LADDER)  
21. 352-3964 [1] CLIP (LADDER)  
22. 4P-7581 [1] CLIP (LADDER)  
23. 4P-8134 [1] CLIP (LADDER)  
24. 5C-2890 M [1] NUT (M6X1-THD)  
25. 5C-8312 M [4] NUT (M4X0.7-THD)  
26. 5C-9553 M [6] BOLT (M6X1X16-MM)  
27. 5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
28. 5P-7464 [1] CLIP (SLOT)  
29. 5P-7465 [1] CLIP (TAB)  
30. 6V-9672 M [4] SCREW-MACHINE (M4X0.7X16-MM)  
31. 7C-4354 [1] CLIP  
32. 8T-2920 [1] GROMMET (27-MM ID)  
33. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
34. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
35. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
36. 8T-4138 M [2] BOLT (M6X1X20-MM)  
37. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
38. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
39. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
40. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
41. 8T-4200 M [6] BOLT (M8X1.25X16-MM)  
42. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4224 [9] WASHER-HARD (8.8X16X2-MM THK)  
44. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
45. 8T-4971 M [1] BOLT (M6X1X30-MM)  
46. 9X-8256 [9] WASHER (6.6X12X2-MM THK)  
47. 326-9726 C [2] BASE-MOUNTING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00712100129
 

370-5334: WIRING GP-FRONT

370-5334 WIRING GP-FRONT
S/N SHW1-UP
PART OF 468-4615 BOOM AR
i04589411 M0071210
3705334 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 305.5E2 CR MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [3] STRAP-CABLE  
2. 7K-1181 [2] STRAP-CABLE  
3. 204-1611 [2] STRAP (DUAL)  
4. 279-1308 [1] PLATE AS  
5. 370-5397 [1] HARNESS AS-FRONT (BOOM)  
  103-2529 E HOSE (199-CM)  
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
  2L-8075 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
6. 5C-9553 M [1] BOLT (M6X1X16-MM)  
7. 5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
8. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
9. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
10. 9M-8406 [2] CLIP (LOOP)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Battery - Recycle
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators
Battery or Battery Cable - Inspect/Replace
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators
Battery Disconnect Switch - If Equipped
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators
Fuses - Replace
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Installation Procedure for Key Box Kit on Certain Mini Hydraulic Excavators {1408, 5258, 7301}
Installation Procedure for Key Box Kit on Certain Mini Hydraulic Excavators {1408, 5258, 7301}
Technical Information Bulletin
Service Hour Meter Malfunctions on Mini Hydraulic Excavators Equipped with a Canopy {1408, 7301}
Service Hour Meter Malfunctions on Mini Hydraulic Excavators Equipped with a Canopy {1408, 7301}
Systems Operation
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Troubleshooting
Electrical Connectors
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Relay - Test - ECM Main Relay
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Service Magazine
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
An Improved Service Meter Kit Is Now Used on Certain Mini Hydraulic Excavators {1408, 7301}
An Improved Service Meter Kit Is Now Used on Certain Mini Hydraulic Excavators {1408, 7301}
Installation Procedure for the Key Box Kit Is Now Available on Certain Mini Hydraulic Excavators {1408, 5258, 7301}
Installation Procedure for the Key Box Kit Is Now Available on Certain Mini Hydraulic Excavators {1408, 5258, 7301}
A New Service Meter Kit Is Now Used On Certain Mini Hydraulic Excavators {1408, 7301}
A New Service Meter Kit Is Now Used On Certain Mini Hydraulic Excavators {1408, 7301}

Caterpillar Parts SIS Catalog 305.5E2 CR :

WIRING GP-CONSOLE
505-8075 WIRING GP-CONSOLE
WIRING GP-CONSOLE
505-8074 WIRING GP-CONSOLE
WIRING GP-CONSOLE
505-8074 WIRING GP-CONSOLE
WIRING GP-COMMUNICATION
505-8099 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
505-8097 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
505-8097 WIRING GP-COMMUNICATION
SWITCH GP-ROTARY
319-4420 SWITCH GP-ROTARY
SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT
WIRING GP-CONSOLE
505-8076 WIRING GP-CONSOLE
WIRING GP-CONSOLE
505-8076 WIRING GP-CONSOLE
WIRING GP-CONSOLE
505-8077 WIRING GP-CONSOLE
WIRING GP-CONSOLE
505-8077 WIRING GP-CONSOLE
WIRING GP-ENGINE
505-8064 WIRING GP-ENGINE
WIRING GP-ENGINE
505-8064 WIRING GP-ENGINE
WIRING GP-ENGINE
505-8065 WIRING GP-ENGINE
WIRING GP-ENGINE
505-8065 WIRING GP-ENGINE
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.