AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

161-9926 SENSOR GP-PRESSURE PART OF 494-7052 WIRING GP-ENGINE OPTIONAL FIELD REPLACEMENT ORDER 350-0664 SENSOR GP-PRESSURE, 249-5293 HARNESS AS-SENSOR AN ATTACHMENT 3516B


ELECTRICAL AND STARTING SYSTEM
SENSOR GP
STARTING AID GP
STARTING MOTOR GP

INDUSTRIAL ENGINE 3516B INDUSTRIAL ENGINE RL8
 3516B Locomotive Engine RL800001-UP M0071856 3516B RL8   (2016)

ELECTRICAL AND STARTING SYSTEM

SENSOR GP
SENSOR GP-EXHAUST TEMPERATURE
415-2428 SENSOR GP-EXHAUST TEMPERATURE
SENSOR GP-POSITION
9X-9647 SENSOR GP-POSITION
SENSOR GP-PRESSURE
161-9926 SENSOR GP-PRESSURE
SENSOR GP-PRESSURE
194-6724 SENSOR GP-PRESSURE
SENSOR GP-PRESSURE
194-6725 SENSOR GP-PRESSURE
SENSOR GP-SPEED
273-5041 SENSOR GP-SPEED
 

#M00718560360
 

161-9926: SENSOR GP-PRESSURE

161-9926 SENSOR GP-PRESSURE
PART OF 494-7052 WIRING GP-ENGINE
OPTIONAL FIELD REPLACEMENT ORDER 350-0664 SENSOR GP-PRESSURE, 249-5293 HARNESS AS-SENSOR
AN ATTACHMENT
i00999990 M0071856
1619926 SENSOR GP-PRESSURE Parts scheme
  For full view, you need register

Parts for your 3516B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-1813 E SLEEVE (34-CM)  
2. 155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
3. 194-5226 [3] WIRE AS (16-GA)  
    -OR-
  194-5227 [3] WIRE AS (14-GA)  
  E   ORDER BY THE CENTIMETER
 

#M00718560361
 

194-6724: SENSOR GP-PRESSURE

194-6724 SENSOR GP-PRESSURE
PART OF 494-7052 WIRING GP-ENGINE
OPTIONAL FIELD REPLACEMENT ORDER 276-6793 SENSOR GP-PRESSURE
AN ATTACHMENT
i01447698 M0071856
1946724 SENSOR GP-PRESSURE Parts scheme
  For full view, you need register

Parts for your 3516B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-1813 E SLEEVE (34-CM)  
2. 155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3. 194-5226 [3] WIRE AS (16-GA)  
  E   ORDER BY THE CENTIMETER
 

#M00718560362
 

194-6725: SENSOR GP-PRESSURE

194-6725 SENSOR GP-PRESSURE
PART OF 494-7052 WIRING GP-ENGINE
AN ATTACHMENT
i01448535 M0071856
1946725 SENSOR GP-PRESSURE Parts scheme
  For full view, you need register

Parts for your 3516B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-1813 E SLEEVE (34-CM)  
2. 155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3. 194-5226 [3] WIRE AS (16-GA)  
    -OR-
  194-5227 [3] WIRE AS (14-GA)  
  E   ORDER BY THE CENTIMETER
 

#M00718560363
 

273-5041: SENSOR GP-SPEED

273-5041 SENSOR GP-SPEED
PART OF 494-7052 WIRING GP-ENGINE
FOR USE WITH FIELD REPLACEMENT OF 129-6628 ON THE FOLLOWING ENGINES ONLY, 3508, 3512, 3508B, 3512B, 3516B, & 3524B
AN ATTACHMENT
i02462186 M0071856
2735041 SENSOR GP-SPEED Parts scheme
  For full view, you need register

Parts for your 3516B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 522-1643 [1] SENSOR GP-SPEED  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  194-5226 [3] WIRE AS (16-GA)  
    -OR-
  194-5227 [3] WIRE AS (14-GA)  
  117-8766 [1] SEAL-O-RING  
  133-1207 [1] WASHER (21.1X28.1X0.9-MM THK)  
 

#M00718560364
 

318-1181: SENSOR GP-SPEED

318-1181 SENSOR GP-SPEED
MAGNETIC, LOW OUTPUT
PART OF 494-7052 WIRING GP-ENGINE
AN ATTACHMENT
i04533711 M0071856
3181181 SENSOR GP-SPEED Parts scheme
  For full view, you need register

Parts for your 3516B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 171-5349 [1] STRAP-MARKER  
2. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
4. 9X-1386 E SLEEVE (14-CM)  
  E   ORDER BY THE CENTIMETER
 

#M00718560365
 

102-2240: SENSOR GP-TEMPERATURE

102-2240 SENSOR GP-TEMPERATURE
PART OF 494-7052 WIRING GP-ENGINE
AN ATTACHMENT
i01966291 M0071856
1022240 SENSOR GP-TEMPERATURE Parts scheme
  For full view, you need register

Parts for your 3516B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-1813 E SLEEVE (34-CM)  
2. 102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  E   ORDER BY THE CENTIMETER
 

#M00718560366
 

195-2150: SENSOR GP-TEMPERATURE

195-2150 SENSOR GP-TEMPERATURE
PART OF 417-4094 WIRING GP-ENGINE
AN ATTACHMENT
i01655455 M0071856
1952150 SENSOR GP-TEMPERATURE Parts scheme
  For full view, you need register

Parts for your 3516B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
 

#M00718560367
 

4P-2732: STARTING AID GP-ETHER

4P-2732 STARTING AID GP-ETHER
AN ATTACHMENT
i00374893 M0071856
4P2732 STARTING AID GP-ETHER Parts scheme
  For full view, you need register

Parts for your 3516B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-7137 [2] VALVE AS-ETHER START  
    (EACH INCLUDES)
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  9X-7138 [1] FILTER & GASKET AS (ETHER STARTING AID)  
2. 7N-2059 [2] CLAMP AS (CYLINDER)  
3. 160-8765 [2] FITTING AS  
    (EACH INCLUDES)
  [1] FILTER (ETHER)  
4. 1N-3416 [2] TUBE-STEEL  
5. 6V-2686 [8] CLIP (SLOT)  
6. 7X-1078 [2] NOZZLE AS-ETHER  
7. 3B-6768 B [2] BUSHING-REDUCER  
8. 3E-7298 C [1] SWITCH AS-TEMPERATURE (ENGINE COOLANT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
9. 6B-1628 [1] BUSHING-REDUCER  
11. 8C-9812 [1] SWITCH AS-TOGGLE (ETHER INJECTION)  
  3L-8187 [3] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
12. 9X-9584 [2] RESISTOR AS  
    (EACH INCLUDES)
  3T-3270 [1] WIRE AS (16-GA)  
  5P-6008 D TUBE-HEAT SHRINK (6.35-MM DIA)(.1M)  
13. 9X-3207 Y [2] TIMER GP (AIR SHUTOFF)  
   
  7X-1062 A [2] CYLINDER AS-ETHER  
    (MUST BE PROCURED LOCALLY FROM YOUR CAT DEALER)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  Y   SEPARATE ILLUSTRATION
 

#M00718560368
 

107-0997: STARTING MOTOR GP-ELECTRIC

107-0997 STARTING MOTOR GP-ELECTRIC
PART OF 494-4302 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
i05808941 M0071856
1070997 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3516B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1597 C [13] BOLT (1/4-28X1-IN)  
2. 3L-3380 [1] BUSHING-TERMINAL  
3. 3T-3418 [1] FRAME AS-END  
4. 3T-3423 [1] CUP  
5. 9G-4101 [1] BUSHING-END  
6. 3T-3424 [1] PLUG-FELT  
7. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
8. 7M-8651 [1] ARMATURE AS  
9. 7M-0324 [1] COIL AS-FIELD  
10. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
11. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
12. 6V-8188 [6] NUT (1/2-13-THD)  
13. 7M-0326 [1] CONNECTOR  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 3E-7769 [1] SOLENOID AS (STARTER)  
16. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
17. 4M-1831 [4] PLUG-LEVER HOUSING  
18. 7L-2894 [4] GASKET  
19. 3R-8797 C [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
20. 7M-0325 [1] INSULATOR  
21. 7F-3488 [6] SHOE-POLE  
22. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
23. 3T-9524 [6] BRUSH AS  
24. 9S-2544 [6] SCREW-HEX HEAD (8-32X11.13-MM)  
25. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
35. 2D-6392 [1] SEAL-O-RING  
36. 2J-8163 [2] SEAL-O-RING  
37. 1T-0808 C [2] WASHER (0.516X0.812X0.09-IN THK)  
38. 3R-8801 [1] CLAMP  
39. 6N-3826 [1] DRIVE AS-MOTOR  
40. 1H-2629 [3] STRIP-INSULATION  
42. 9M-7606 [1] PLUNGER AS  
43. 036-9821 [1] WASHER  
44. 306-3998 C [1] BOOT-RUBBER  
45. 4M-1828 [1] RETAINER-SPRING  
46. 9M-7609 [1] SPRING (SHIFT LEVER)  
47. 1H-1023 [1] SEAL-O-RING  
48. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
49. 3T-3424 [2] PLUG-FELT  
50. 3T-3423 [2] CUP  
51. 1M-9968 [1] BUSHING  
52. 2F-6678 [1] SEAL-LIP TYPE  
53. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
54. 4M-1854 [1] SHAFT-LEVER  
55. 2H-3429 [2] RING-RETAINING  
56. 4M-1853 [1] LEVER AS-SHIFT  
57. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
58. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
59. 4M-1827 [1] RETAINER-SPRING  
60. 8C-3089 [1] SEAL-O-RING  
61. 7T-3974 [1] HOUSING AS-DRIVE  
62. 4M-1896 [1] BUSHING-TERMINAL  
63. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
64. 3T-9494 [6] SPRING  
65. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
66. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES PARTS MARKED J IN GRAPHIC)
70. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
71. 6N-3279 [1] INSULATOR  
72. 4B-2049 [2] NUT (10-32-THD)  
73. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
74. 8F-1434 [2] LOCKWASHER  
75. 3T-3434 B [6] PLUG  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#M00718560369
 

117-8846: STARTING MOTOR GP-ELECTRIC

117-8846 STARTING MOTOR GP-ELECTRIC
32-VOLT
PART OF 399-8642 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
i00678109 M0071856
1178846 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3516B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
2. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
3. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
4. 9S-2544 [6] SCREW-HEX HEAD (8-32X11.13-MM)  
5. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
6. 3T-3418 [1] FRAME AS-END  
7. 3T-9525 [1] PLATE AS-BRUSH (STARTING MOTOR)  
8. 7F-3491 [2] WASHER (0.516X1X0.094-IN THK)  
9. 242-7979 [1] SOLENOID AS (STARTING MOTOR)  
10. 2J-8163 [2] SEAL-O-RING  
11. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
12. 3T-3434 [6] PLUG  
13. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
14. 3L-3380 [1] BUSHING-TERMINAL  
15. 036-9821 [1] WASHER  
16. 4M-1828 [1] RETAINER-SPRING  
17. 4M-1829 [1] BOOT-RUBBER  
19. 9M-7609 [1] SPRING (SHIFT LEVER)  
20. 4M-1827 [1] RETAINER-SPRING  
21. 8C-3089 [1] SEAL-O-RING  
22. 4M-1853 [1] LEVER AS-SHIFT  
23. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
24. 7L-2894 [4] GASKET  
25. 4M-1831 [4] PLUG-LEVER HOUSING  
26. 4M-1854 [1] SHAFT-LEVER  
27. 1H-1023 [1] SEAL-O-RING  
28. 2D-6392 [1] SEAL-O-RING  
29. 7T-3974 [1] HOUSING AS-DRIVE  
30. 6N-3826 [1] DRIVE AS-MOTOR  
31. 2H-3429 [2] RING-RETAINING  
32. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
33. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 6N-3279 [1] INSULATOR  
35. 036-9823 [13] BOLT (1/4-28X1-IN)  
36. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
37. 1H-2629 [3] STRIP-INSULATION  
38. 7M-0324 [1] COIL AS-FIELD  
39. 3F-0379 [12] SCREW-POLE SHOE (3/8-24-THD)  
40. 7F-3488 [6] SHOE-POLE  
41. 7M-8651 [1] ARMATURE AS  
42. 7M-0325 [1] INSULATOR  
43. 3T-9524 [6] BRUSH AS  
44. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & INSULATED WASHERS)
45. 3T-3422 [1] WIRE AS  
46. 3R-8801 [1] CLAMP  
47. 8F-1434 [2] LOCKWASHER  
48. 6V-8188 [6] NUT (1/2-13-THD)  
49. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
50. 4B-2049 [2] NUT (10-32-THD)  
51. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
52. 3T-9494 [6] SPRING  
53. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
54. 9G-4101 [1] BUSHING-END  
55. 3T-3424 [3] PLUG-FELT  
56. 3T-3423 [3] CUP  
57. 1M-9968 [1] BUSHING  
58. 2F-6678 [1] SEAL-LIP TYPE  
59. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
60. 4M-1896 [1] BUSHING-TERMINAL  
61. 6T-0362 [1] INSULATOR  
 

Information:

Special Instruction
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Caterpillar Parts SIS Catalog 3516B :

SENSOR GP-POSITION
9X-9647 SENSOR GP-POSITION
SENSOR GP-EXHAUST TEMPERATURE
415-2428 SENSOR GP-EXHAUST TEMPERATURE
PLUG GP-CONNECTOR
232-4670 PLUG GP-CONNECTOR
PLATE AS-BRUSH
3T-9525 PLATE AS-BRUSH
MOUNTING GP-SENSOR
399-6445 MOUNTING GP-SENSOR
348-8985 HARNESS AS-WIRING
HARNESS AS-WIRING
155-2579 HARNESS AS-WIRING
132-6469 HARNESS AS-WIRING
SENSOR GP-PRESSURE
194-6724 SENSOR GP-PRESSURE
SENSOR GP-PRESSURE
194-6725 SENSOR GP-PRESSURE
SENSOR GP-SPEED
273-5041 SENSOR GP-SPEED
SENSOR GP-SPEED
318-1181 SENSOR GP-SPEED
SENSOR GP-TEMPERATURE
102-2240 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
195-2150 SENSOR GP-TEMPERATURE
STARTING AID GP-ETHER
4P-2732 STARTING AID GP-ETHER
STARTING MOTOR GP-ELECTRIC
107-0997 STARTING MOTOR GP-ELECTRIC

Truck sale:

Caterpillar 3516B
 
Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.
 
500,000 
Caterpillar 3516B, Stationary Generator Sets, Construction
- Stationary Generator Sets
FINNING CHILE S.A.
 
350,000 
Caterpillar 3516B, Stationary Generator Sets, Construction


Caterpillar 3516B
 
Caterpillar 3516B
- Industrial engines
RING POWER CORP.
Caterpillar 3516B
 
Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.