166-6937 MODULE GP-QUAD GAUGE BOOST PRESSURE, AFTERCOOLER TEMPERATURE, INTAKE AIR TEMPERATURE, ENGINE OIL PRESSURE PART OF 394-8291 PANEL GP-INSTRUMENT AN ATTACHMENT 3516B

OPERATOR STATION

MONITOR GP

0. 166-6937 MODULE GP-

ELECTRICAL AND STARTING SYSTEM

MODULE GP-SYSTEM COMMUNICATION

1. 188-3080 MODULE GP-

OPERATOR STATION

PANEL GP

2. 180-7386 PANEL GP-C
3. 394-8291 PANEL GP-I
4. 9X-3207 TIMER GP

SERVICE EQUIPMENT AND SUPPLIES

CHARTS & FILMS

5. 6L-4502 CHART-PLAT

SHIPPING GP

6. 354-0498 COVER GP-S

CHARTS & FILMS

7. 352-9860 FILM GP
8. 357-1662 FILM GP
0. INFORMATION

INDUSTRIAL ENGINE 3516B INDUSTRIAL ENGINE RL8
3516B Locomotive Engine RL800001-UP M0071856 3516B RL8 (2016)

OPERATOR STATION

MONITOR GP

166-6929 MODULE GP-QUAD GAUGE

166-6936 MODULE GP-QUAD GAUGE

166-6937 MODULE GP-QUAD GAUGE

#M00718560400

166-6937: MODULE GP-QUAD GAUGE

MODULE GP-QUAD GAUGE

166-6937 MODULE GP-QUAD GAUGE
BOOST PRESSURE, AFTERCOOLER TEMPERATURE, INTAKE AIR TEMPERATURE, ENGINE OIL PRESSURE
PART OF 394-8291 PANEL GP-INSTRUMENT
AN ATTACHMENT

i01182172 M0071856

1666937 MODULE GP-QUAD GAUGE Parts scheme

For full view, you need register

Parts for your 3516B INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE ASSEMBLY & WEDGE)
2.	186-3735	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
3.	3E-3389	[1]	WEDGE-RECEPTACLE LOCK (8-PIN)
4.	8T-8737	[1]	PLUG-SEAL

#M00718560401

188-3080: MODULE GP-SYSTEM COMMUNICATION

MODULE GP-SYSTEM COMMUNICATION

188-3080 MODULE GP-SYSTEM COMMUNICATION
AN ATTACHMENT

i02665591 M0071856

1883080 MODULE GP-SYSTEM COMMUNICATION Parts scheme

For full view, you need register

Parts for your 3516B INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	109-5737	[1]	FILM-IDENTIFICATION (COMMUNICATION MODULE)
2.	193-5488	[1]	BATTERY (LITHIUM)
3.	109-5738	[1]	FILM-IDENTIFICATION (COMMUNICATION MODULE)

#M00718560402

180-7386: PANEL GP-CONTROL

PANEL GP-CONTROL

180-7386 PANEL GP-CONTROL
AN ATTACHMENT

i01487740 M0071856

For full view, you need register

Parts for your 3516B INDUSTRIAL ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
158-6255 Y	[1]	CONTROL GP-ENGINE MONITORING (CATERPILLAR MONITORING SYSTEM)
8N-0694 Y	[1]	SWITCH AS-TOGGLE (SINGLE POLE)(SCROLL)
8D-2676 Y	[1]	SWITCH AS-TOGGLE (SINGLE POLE)(ENGINE PARAMETER, RH, LH)
8N-1535	[1]	BELL AS-END
100-5566	[1]	BEZEL
153-8531	[1]	FILM-IDENTIFICATION (CONTROL PANEL)
6V-8378	[4]	NUT (10-32-THD)
9X-6856	[11]	PIN-CONNECTOR (16-GA TO 18-GA)
8T-9834	[1]	PLUG AS-CONNECTOR (40-PIN)
3E-4367	[1]	RING-RETAINING
3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
9X-3132	[2]	SEAL-CONNECTOR (40-PIN)
3T-0203	[1]	PLUG AS-CONNECTOR (20-PIN)
8T-8737	[25]	PLUG-SEAL
7G-7917	[18]	PLUG-SEAL
7U-4891	[4]	SCREW (10-32X1-IN)
186-3736	[25]	SOCKET-CONNECTOR (16-GA TO 18-GA)
9X-6772	[1]	STRAP-CABLE
7N-8008	[1]	SWITCH AS-TOGGLE (CLEAR, MODE)
3L-8187	[6]	LOCKWASHER
6T-3631	[2]	NUT-HEX (15/32-32-THD)
6T-3632	[1]	LOCKWASHER
6T-3633	[1]	RING-LOCKING
6V-8374	[6]	SCREW-MACHINE (6-32X0.25-IN)
4B-4274	[4]	WASHER (5.5X13X1.2-MM THK)
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#M00718560403

394-8291: PANEL GP-INSTRUMENT

PANEL GP-INSTRUMENT

394-8291 PANEL GP-INSTRUMENT
AN ATTACHMENT

i06269457 M0071856

3948291 PANEL GP-INSTRUMENT Parts scheme

For full view, you need register

Parts for your 3516B INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-4480	[1]	BOOT-SWITCH
2.	4W-5972	[1]	KNOB
3.	8C-6123	[1]	NUT (1/4-40-THD)
4.	9W-0073	[1]	SWITCH AS-PUSH BUTTON (ALARM SILENCE)
5.	100-5566	[4]	BEZEL
6.	118-5075	[6]	LAMP (12-VOLT)
7.	122-9457	[1]	POTENTIOMETER (ENGINE SPEED)
8.	123-9694	[1]	HORN
9.	153-8531	[1]	FILM-IDENTIFICATION (CONTROL PANEL)
10.	155-2556	[1]	HARNESS AS-BOX
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	155-2265	[3]	KIT-CONNECTING PLUG (8-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	5P-4571	[7]	TERMINAL-BLADE (14-GA TO 16-GA)
			-OR-
	5P-5618	[7]	TERMINAL-BLADE (10-GA TO 12-GA)
	6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.6-M)
	7E-8866	[12]	TERMINAL-BLADE (14-GA TO 16-GA)
	8N-1534	[1]	RECEPTACLE AS-CONNECTOR (20-PIN)
	8N-1536	[1]	NUT (1-5/8-18-THD)
	8T-8730	[35]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[41]	PLUG-SEAL
	8T-9834	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3132	[2]	SEAL-CONNECTOR (40-PIN)
	9X-6856	[8]	PIN-CONNECTOR (16-GA TO 18-GA)
	113-5183	[6]	SOCKET-LAMP
	113-5184	[12]	TERMINAL-RECEPTACLE (16-GA TO 18-GA)
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
11.	155-2576	[1]	FILM-CONTROL PANEL (LOCOMOTIVE)
12.	155-2577	[1]	PLATE AS
13.	155-2597	[1]	BRACKET
14.	166-6929 Y	[1]	MODULE GP-QUAD GAUGE (EXHAUST GAS TEMP, FILTERS)
15.	166-6937 Y	[1]	MODULE GP-QUAD GAUGE (AIR INLET,AFTERCOOLER,ENG OIL)
16.	158-6255 CY	[1]	CONTROL GP-ENGINE MONITORING
17.		[1]	SWITCH AS-ROCKER
	3E-8775	[1]	SWITCH AS (24-VOLT)(CLEAR, MODE)
	3E-8825	[2]	LAMP (24-VOLT)
	155-2705	[1]	ACTUATOR
18.		[1]	SWITCH AS-ROCKER
	3E-8768	[1]	SWITCH AS (24-VOLT)(SCROLL)
	3E-8825	[1]	LAMP (24-VOLT)
	155-2706	[1]	ACTUATOR
19.		[1]	SWITCH AS-ROCKER
	3E-8858	[1]	SWITCH AS (ENGINE PARAMETER, RH, LH)
	3E-8825	[2]	LAMP (24-VOLT)
	155-2705	[1]	ACTUATOR
20.	166-6936 Y	[1]	MODULE GP-QUAD GAUGE (BATTERY, COOLANT, FUEL, OIL)
21.	4B-4274	[16]	WASHER (5.5X13X1.2-MM THK)
22.	6V-8225 M	[2]	NUT (M6X1-THD)
23.	6V-8378	[16]	NUT (10-32-THD)
24.	7U-4891	[16]	SCREW (10-32X1-IN)
25.	8T-3991 M	[2]	SCREW-BUTTON HEAD (M6X1X20-MM)
26.	9X-8267	[2]	WASHER (6.6X12X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#M00718560404

9X-3207: TIMER GP

TIMER GP

9X-3207 TIMER GP
PART OF 4P-2732 STARTING AID GP-ETHER
AN ATTACHMENT

i00090809 M0071856

For full view, you need register

Parts for your 3516B INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7N-7781	[1]	HOUSING-RECEPTACLE (14-GA TO 18-GA)
	7N-7779	[1]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	7N-7780	[2]	PIN-CONNECTOR (14-GA TO 18-GA)

#M00718560405

6L-4502: CHART-PLATE & FILM

CHART-PLATE & FILM

6L-4502 CHART-PLATE & FILM

i06729663 M0071856

For full view, you need register

Parts for your 3516B INDUSTRIAL ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
	[1]	FILM-IDENTIFICATION (CERTIFICATION)
		CONTACT YOUR LOCAL DEALER.
		INSTALL FILM VERTICALLY ON THE RH REAR VALVE COVER, READABLE FROM THE FRONT OF THE ENGINE. IF THAT VALVE COVER IS NOT AVAILABLE, MOVE FILM FORWARD TO THE NEXT AVAILABLE VALVE COVER.
250-3444	[1]	FILM-INFORMATION (STANDARD ROTATION)
		INSTALL FILM ON THE LH CAM GEAR COVER IN A VISIBLE LOCATION, IF THAT COVER IS NOT AVAILABLE MOVE TO THE RH CAM GEAR COVER.
225-3226	[2]	FILM-WARNING (HOT SURFACE)
		INSTALL FILM ON CYL. #15 & #16 ROCKER BASES, IF THESE ARE NOT AVAILABLE MOVE FILM FORWARD TO THE FIRST VISIBLE ROCKER BASE FROM THE SIDE OF THE ENGINE.
225-3227	[2]	FILM-WARNING (HOT SURFACE)
		INSTALL ONE FILM ON THE RH SIDE ON THE OIL COOLER, ABOVE THE DIPSTICK, AND ONE FILM ON THE LH SIDE OF THE ENGINE, ON THE CRANKCASE COVER NEAR THE MIDLINE OF THE ENGINE, BOTH FILMS SHOULD BE VISIBLE FROM THE SIDE OF THE ENGINE.
228-3369	[2]	FILM-WARNING (DO NOT OPERATE, READ OMM)
		INSTALL ONE FILM ON THE FIRST AVAILABLE ROCKER BASE ON EACH SIDE OF THE ENGINE, NEAREST THE CENTERLINE OF THE ENGINE.
115-5852	[1]	PLATE & FILM GP (ENGINE INFORMATION)
		CONTACT YOUR LOCAL DEALER.
		INSTALL FILM ON THE LH, FRONT, LOWER HEAD FACE OF THE BLOCK BETWEEN CYL. #2 AND THE FRONT HOUSING, READABLE FROM THE REAR OF ENGINE.
		INSTALL CLEAR LAMINATE OVER FILM.
298-5631	[2]	PLATE-IDENTIFICATION (CAT)
		INSTALL ONE ON RH REAR CAM COVER AND ONE ON THE LH FRONT CAM COVER IF VISIBLE. IF EITHER PRIMARY LOCATION IS NOT VISIBLE INSTALL PLATE ON THE NEXT VISIBLE CAM COVER LOCATION ON THAT SIDE OF THE ENGINE.
3N-3790	[1]	PLATE-SERIAL NUMBER (ENGINE)
		CONTACT YOUR LOCAL DEALER.
		REFLATTEN AFTER STAMPING
		INSTALL ON LH SIDE OF BLOCK NEAR REAR FACE ON CAMSHAFT COMPARTMENT USING 7B-3028 DRIVE SCREWS.
		STAMP SERIAL NUMBER IN BLOCK JUST BELOW PLATE IN FIGURES 6 HIGH.
7B-3028	[2]	SCREW-DRIVE (NO 4X 3/16-IN)