AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

343-4360 STARTING AID GP-ETHER AN ATTACHMENT 3516C INDUSTRIAL ENGINE


ELECTRICAL AND STARTING SYSTEM
STARTING AID GP
STARTING MOTOR GP
SWITCH GP
WIRING GP
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMS

INDUSTRIAL ENGINE 3516C INDUSTRIAL ENGINE MNF
 3516C Industrial Engine MNF00001-UP M0071860 3516C MNF   (2016)

ELECTRICAL AND STARTING SYSTEM

STARTING AID GP
STARTING AID GP-ETHER
343-4360 STARTING AID GP-ETHER
 

#M00718600170
 

343-4360: STARTING AID GP-ETHER

343-4360 STARTING AID GP-ETHER
AN ATTACHMENT
i04494168 M0071860
3434360 STARTING AID GP-ETHER Parts scheme
  For full view, you need register

Parts for your 3516C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-6772 [1] STRAP-CABLE (213-MM)  
2. 118-8454 [2] NOZZLE AS-ETHER  
3. 268-1565 [2] ELBOW  
4. 343-4362 I [1] HOSE AS  
5. 343-4363 I [1] HOSE AS  
6. 0S-1594 [1] BOLT (3/8-16X1-IN)  
7. 0T-0065 [1] BOLT (3/8-16X3.5-IN)  
8. 198-4766 [2] WASHER-HARD (11X25X10-MM THK)  
9. 1A-2029 [1] BOLT (3/8-16X1.125-IN)  
10. 316-0487 [1] SPACER (11X25X70-MM THK)  
11. 4D-8123 [4] CLIP (LOOP)  
12. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#M00718600171
 

335-4149: STARTING MOTOR GP-ELECTRIC

335-4149 STARTING MOTOR GP-ELECTRIC -LH
24-VOLT
AN ATTACHMENT
i05069217 M0071860
3354149 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3516C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 352-9766 CY [2] STARTING MOTOR GP-ELECTRIC (24-VOLT)  
2. 9Y-6089 [2] GASKET  
3. 7J-8902 [6] BOLT-12 POINT HEAD (5/8-11X1.5-IN)  
4. 7L-5887 [1] CABLE AS (0000-GA)  
  3L-7634 [2] TERMINAL-RING (0000-GA, 1/2-IN SCREW)  
5. 294-2318 C [2] COVER-TERMINAL (RED)  
6. 4L-6155 [1] CABLE AS (0000-GA)  
  3L-7634 [2] TERMINAL-RING (0000-GA, 1/2-IN SCREW)  
7. 3L-6836 [1] SPACER (0.5X0.75X0.56-IN THK)  
8. 294-2319 C [2] COVER-TERMINAL (BLACK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#M00718600172
 

338-3454: STARTING MOTOR GP-ELECTRIC

338-3454 STARTING MOTOR GP-ELECTRIC
24-VOLT
FIELD REPLACEMENT FOR @@@@@352-9766@@@@@
i03784531 M0071860
3383454 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3516C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 125-6535 [1] COVER-STARTING MOTOR  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 8C-3089 [1] SEAL-O-RING  
17. 4M-1853 [1] LEVER AS-SHIFT  
18. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
19. 7L-2894 [4] GASKET  
20. 4M-1831 [4] PLUG-LEVER HOUSING  
21. 4M-1854 [1] SHAFT-LEVER  
22. 1H-1023 [1] SEAL-O-RING  
23. 2D-6392 [1] SEAL-O-RING  
24. 494-6475 [1] HOUSING AS-DRIVE  
25. 6N-3826 [1] DRIVE AS-MOTOR  
26. 2H-3429 [1] RING-RETAINING  
27. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
28. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 6N-3279 [1] INSULATOR  
30. 0S-1597 [13] BOLT (1/4-28X1-IN)  
31. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
32. 1H-2629 [3] STRIP-INSULATION  
33. 7M-0324 [1] COIL AS-FIELD  
34. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
35. 7F-3488 [6] SHOE-POLE  
36. 7M-8651 [1] ARMATURE AS  
37. 7M-0325 [1] INSULATOR  
38. 3T-9524 [6] BRUSH AS  
39. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
40. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
40A. 3R-8801 [1] CLAMP  
42. 8F-1434 [2] LOCKWASHER  
43. 6V-8188 [6] NUT (1/2-13-THD)  
44. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
45. 4B-2049 [6] NUT (10-32-THD)  
46. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
47. 3T-9494 [6] SPRING  
48. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
49. 9G-4101 [1] BUSHING-END  
50. 3T-3424 [3] PLUG-FELT  
51. 3T-3423 [3] CUP  
52. 1M-9968 [1] BUSHING  
53. 2F-6678 [1] SEAL-LIP TYPE  
54. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
55. 4M-1896 [1] BUSHING-TERMINAL  
56. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
  Y   SEPARATE ILLUSTRATION
 

#M00718600173
 

352-9766: STARTING MOTOR GP-ELECTRIC

352-9766 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 335-4149 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
i04040907 M0071860
3529766 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3516C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 [6] PLUG (FELT)  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 8C-3089 [1] SEAL-O-RING  
17. 4M-1853 [1] LEVER AS-SHIFT  
18. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
19. 7L-2894 [4] GASKET  
20. 4M-1831 [4] PLUG-LEVER HOUSING  
21. 4M-1854 [1] SHAFT-LEVER  
22. 1H-1023 [1] SEAL-O-RING  
23. 2D-6392 [1] SEAL-O-RING  
24. 528-6787 [1] HOUSING AS-DRIVE  
25. 6N-3826 [1] DRIVE AS-MOTOR  
26. 2H-3429 [1] RING-RETAINING  
27. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
28. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 6N-3279 [1] INSULATOR  
30. 0S-1597 [13] BOLT (1/4-28X1-IN)  
31. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
32. 1H-2629 [3] STRIP-INSULATION  
33. 7M-0324 [1] COIL AS-FIELD  
34. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
35. 7F-3488 [6] SHOE-POLE  
36. 7M-8651 [1] ARMATURE AS  
37. 7M-0325 [1] INSULATOR  
38. 3T-9524 [6] BRUSH AS  
39. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
40. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
41. 3R-8801 [1] CLAMP  
42. 8F-1434 [2] LOCKWASHER  
43. 6V-8188 [6] NUT (1/2-13-THD)  
44. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
45. 4B-2049 [6] NUT (10-32-THD)  
46. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
47. 3T-9494 [6] SPRING  
48. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
49. 9G-4101 [1] BUSHING-END  
50. 3T-3424 [3] PLUG-FELT  
51. 3T-3423 [3] CUP  
52. 1M-9968 [1] BUSHING  
53. 2F-6678 [1] SEAL-LIP TYPE  
54. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
55. 4M-1896 [1] BUSHING-TERMINAL  
56. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
57. 351-8955 [1] SEAL-O-RING  
58. 125-6535 [1] COVER-STARTING MOTOR  
  Y   SEPARATE ILLUSTRATION
 

#M00718600174
 

146-0240: SWITCH GP-TOGGLE

146-0240 SWITCH GP-TOGGLE
PART OF 358-2461 FILTER GP-FUEL
FIELD REPLACEMENT ORDER 1-249-5492 GUARD-SWITCH, 1-259-1107 SWITCH AS-TOGGLE
AN ATTACHMENT
i05769312 M0071860
1460240 SWITCH GP-TOGGLE Parts scheme
  For full view, you need register

Parts for your 3516C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 6T-3633 [1] RING-LOCKING  
4. 6T-3631 [2] NUT-HEX (15/32-32-THD)  
5. 6T-3632 [1] LOCKWASHER  
6. 112-4550 E SLEEVE (11-CM)  
  E   ORDER BY THE CENTIMETER
 

#M00718600175
 

459-1866: WIRING GP-ENGINE

459-1866 WIRING GP-ENGINE
AN ATTACHMENT
i06159511 M0071860
4591866 WIRING GP-ENGINE Parts scheme 4591866 WIRING GP-ENGINE Parts scheme 4591866 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 3516C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-0553 [1] FITTING (SPECIAL)  
2. 7E-5326 [1] COVER  
3. 7E-6016 [1] GASKET  
4. 8T-8737 [2] PLUG-SEAL  
5. 9G-5127 [1] BREATHER (ATMOSPHERIC)(HYDRAULIC)  
6. 9U-2277 [1] CLIP AS  
7. 9X-6772 [72] STRAP-CABLE  
8. 117-0069 [1] BLOCK-SENSOR MOUNTING  
9. 153-7485 [1] WIRE AS-GROUND (ALTERNATOR)  
10. 155-2078 [1] CONNECTOR  
11. 164-0241 [1] SLEEVE  
12. 256-6453 [1] SENSOR-TEMPERATURE (2-PIN)(AFTERCOOLER)  
12A. 256-6453 [1] SENSOR-TEMPERATURE (2-PIN)(COOLANT)  
13. 261-6847 [2] ADAPTER  
14. 265-9033 Y [1] SENSOR GP-SPEED (CRANKSHAFT)  
14A. 265-9033 Y [1] SENSOR GP-SPEED (ENGINE TIMING)  
15. 308-0875 [1] HOSE AS  
16. 318-1181 Y [1] SENSOR GP-SPEED (MAGNETIC)(ENGINE)  
17. 320-3060 [1] SENSOR GP-PRESSURE (FILTERED FUEL)  
17A. 320-3060 [1] SENSOR GP-PRESSURE (UNFILTERED FUEL)  
17B. 320-3060 [1] SENSOR GP-PRESSURE (ENGINE OIL BLOCK INLET)  
17C. 320-3060 [1] SENSOR GP-PRESSURE (ENGINE OIL FILTER INLET)  
18. 320-3061 [1] SENSOR GP-PRESSURE (AIR INLET MANIFOLD)  
19. 320-3063 [1] SENSOR GP-PRESSURE (ATMOSPHERIC)  
19A. 320-3063 [1] SENSOR GP-PRESSURE (CRANKCASE)  
20. 335-3999 [1] CONNECTOR  
21. 353-5439 [3] CONNECTOR  
22. 353-5441 [2] ADAPTER-ELBOW  
23. 387-8296 Y [1] HARNESS AS-ENGINE  
24. 415-2431 [1] SENSOR GP-EXHAUST TEMPERATURE (TURBOCHARGER INLET, LH)  
24A. 415-2431 [1] SENSOR GP-EXHAUST TEMPERATURE (TURBOCHARGER INLET, RH)  
    (EACH SENSOR GP INCLUDES)
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  230-4014 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
25. 430-9455 Y [1] SENSOR GP-LIQUID LEVEL (ENGINE OIL, LOW)  
26. 454-8551 [1] GUARD AS-SENSOR  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
27. 459-1867 Y [1] PROTECTION GP-WIRING  
28. 030-7946 [1] ELBOW  
29. 032-9828 [2] GROMMET  
30. 0L-1143 [1] BOLT (3/8-16X2.5-IN)  
31. 0S-0509 [17] BOLT (3/8-16X0.75-IN)  
32. 165-3931 [2] BOLT (3/8-16X1.75-IN)  
33. 0S-1590 [13] BOLT (3/8-16X2-IN)  
34. 165-3929 [2] BOLT (3/8-16X1.5-IN)  
35. 0S-1594 [6] BOLT (3/8-16X1-IN)  
36. 0S-1595 [3] BOLT (1/2-13X1.25-IN)  
37. 0S-1620 [1] BOLT (1/2-13X0.75-IN)  
38. 0S-1621 [4] BOLT (1/2-13X1-IN)  
39. 121-5729 [1] ELBOW  
40. 130-5300 [1] CLIP  
41. 204-2281 [5] STRAP-CABLE  
43. 204-8000 [5] MOUNTING-CABLE TIE  
44. 228-7100 [5] SEAL-O-RING  
45. 228-7101 [1] SEAL-O-RING  
46. 238-5080 [1] SEAL-O-RING  
47. 2A-4639 [1] BOLT (3/8-16X1.625-IN)  
48. 2H-3855 [1] BOLT (1/2-13X0.875-IN)  
49. 309-4314 [1] CLIP (LADDER)  
50. 330-9739 [1] ADAPTER  
51. 352-3965 [2] CLIP (LADDER)(LADDER)  
52. 3A-3692 [1] CLIP  
53. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
54. 3H-7654 [1] WASHER-HARD (13.5X22.5X3-MM THK)  
55. 3J-1907 [1] SEAL-O-RING  
56. 3K-0360 [1] SEAL-O-RING  
57. 3P-1932 [1] ADAPTER  
58. 4B-4281 [1] WASHER (16.8X33X2.5-MM THK)  
59. 4P-0489 [15] SPACER (11X25X26.8-MM THK)  
60. 4P-7428 [2] CLIP (LADDER)  
61. 4P-7429 [1] CLIP (LADDER)  
62. 4P-7581 [14] CLIP (LADDER)  
63. 4P-8134 [41] CLIP (LADDER)  
64. 4S-1962 [1] CLIP (LOOP)  
65. 5M-2894 [42] WASHER-HARD (10.2X18.5X2.5-MM THK)  
66. 5P-7462 [2] CLIP (SLOT)  
67. 5P-7463 [2] CLIP (TAB)  
68. 5P-7464 [5] CLIP (SLOT)  
69. 5P-7465 [5] CLIP (TAB)  
70. 5P-7468 [13] CLIP (SLOT)  
71. 5P-7469 [13] CLIP (TAB)  
72. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
73. 6V-0683 [2] GROMMET  
74. 6V-1249 [5] GROMMET (22-MM ID)  
75. 6V-1874 [1] GROMMET (31-MM ID)  
76. 6V-4349 [5] GROMMET  
77. 136-7227 [1] SEAL-O-RING  
78. 6V-5048 [7] SEAL-O-RING  
79. 6V-9028 [2] SEAL-O-RING  
80. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
81. 8L-2786 [1] SEAL-O-RING  
82. 8T-6767 [2] PLUG-PIPE (3/8-18-THD)  
83. 8T-7087 [1] GROMMET (34-MM ID)  
84. 8T-9518 [6] GROMMET (24-MM ID)  
  Y   SEPARATE ILLUSTRATION
 

#M00718600176
 

6L-4502: CHART-PLATE & FILM

6L-4502 CHART-PLATE & FILM
i06744685 M0071860
  For full view, you need register

Parts for your 3516C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  [1] FILM-IDENTIFICATION (CERTIFICATION)  
    CONTACT YOUR LOCAL DEALER.
    INSTALL FILM VERTICALLY ON THE RH REAR VALVE COVER, READABLE FROM THE FRONT OF THE ENGINE. IF THAT VALVE COVER IS NOT AVAILABLE, MOVE FILM FORWARD TO THE NEXT AVAILABLE VALVE COVER.
  250-3444 [1] FILM-INFORMATION (STANDARD ROTATION)  
    INSTALL FILM ON THE LH CAM GEAR COVER IN A VISIBLE LOCATION, IF THAT COVER IS NOT AVAILABLE MOVE TO THE RH CAM GEAR COVER.
  225-3226 [4] FILM-WARNING (HOT SURFACE)  
    INSTALL FILMS ON CYL. #3, #4, #11 AND #12 ROCKER BASES IF ANY OF THESE BASES ARE NOT AVAILABLE MOVE FILM TO THE FIRST VISIBLE ROCKER BASE NEAREST THE TURBOS.
  225-3227 [2] FILM-WARNING (HOT SURFACE)  
    INSTALL ONE FILM ON THE RH SIDE ON THE OIL COOLER, ABOVE THE DIPSTICK, AND ONE FILM ON THE LH SIDE OF THE ENGINE,ON THE CRANKCASE COVER NEAR THE MIDLINE OF THE ENGINE, BOTH FILMS SHOULD BE VISIBLE FROM THE SIDE OF THE ENGINE.
  228-3369 [2] FILM-WARNING (DO NOT OPERATE, READ OMM)  
    INSTALL ONE FILM ON THE FIRST AVAILABLE ROCKER BASE ON EACH SIDE OF THE ENGINE, NEAREST THE CENTERLINE OF THE ENGINE.
  115-5852 [1] PLATE & FILM GP (ENGINE INFORMATION)  
    CONTACT YOUR LOCAL DEALER.
    INSTALL FILM ON THE RH HEAD FACE AT THE REAR OF THE BLOCK BETWEEN REAR CYL. HEAD AND THE FLYWHEEL HOUSING.
    INSTALL CLEAR LAMINATE OVER FILM.
  419-8867 [2] PLATE-IDENTIFICATION (CAT)  
    INSTALL ONE ON THE RH REAR CAM COVER AND ONE ON THE LH FRONT CAM COVER IF VISIBLE.
    IF EITHER PRIMARY LOCATION IS NOT VISIBLE INSTALL PLATE ON THE NEXT VISIBLE CAM COVER LOCATION ON THAT SIDE OF THE ENGINE.
  3N-3790 [1] PLATE-SERIAL NUMBER (ENGINE)  
    CONTACT YOUR LOCAL DEALER.
    REFLATTEN AFTER STAMPING
    INSTALL ON LH SIDE OF BLOCK NEAR REAR FACE ON CAMSHAFT COMPARTMENT USING 7B3028 DRIVE SCREWS.
    STAMP SERIAL NUMBER IN BLOCK JUST BELOW PLATE IN FIGURES 6 HIGH.
  7B-3028 [2] SCREW-DRIVE (NO 4X 3/16-IN)  
 

#M00718600177
 

102-9939: PLATE & FILM GP

102-9939 PLATE & FILM GP
AN ATTACHMENT
i00555764 M0071860
  For full view, you need register

Parts for your 3516C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3N-3790 [1] PLATE-SERIAL NUMBER (ENGINE)  
  7B-3028 [2] SCREW-DRIVE (NO 4X 3/16-IN)  
 

Information:

Caterpillar Parts SIS Catalog 3516C :

SENSOR GP-SPEED
318-1181 SENSOR GP-SPEED
SENSOR GP-SPEED
265-9033 SENSOR GP-SPEED
SENSOR GP-POSITION
266-1473 SENSOR GP-POSITION
SENSOR GP-LIQUID LEVEL
430-9455 SENSOR GP-LIQUID LEVEL
PROTECTION GP-WIRING
459-1867 PROTECTION GP-WIRING
PLATE AS-BRUSH
3T-9525 PLATE AS-BRUSH
MOUNTING GP-SENSOR
447-5920 MOUNTING GP-SENSOR
132-6469 HARNESS AS-WIRING
STARTING MOTOR GP-ELECTRIC
335-4149 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
338-3454 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
352-9766 STARTING MOTOR GP-ELECTRIC
SWITCH GP-TOGGLE
146-0240 SWITCH GP-TOGGLE
WIRING GP-ENGINE
459-1866 WIRING GP-ENGINE
6L-4502 CHART-PLATE & FILM
102-9939 PLATE & FILM GP
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.