349D2 L Excavator GAX00001-UP (MACHINE) POWERED BY C13 Engine ELECTRICAL AND STARTING SYSTEM Caterpillar SIS

EXCAVATOR 349D2 EXCAVATOR GAX
349D2 L Excavator GAX00001-UP (MACHINE) POWERED BY C13 Engine M0071924 349D2 GAX (2016)

Parts group 349D2:

For full view, you need register

ELECTRICAL AND STARTING SYSTEM

ALARM GP

132-1829 ALARM GP

132-1829 ALARM GP -FAULT
S/N GAX1-UP
24-VOLT
PART OF 336-6296 WIRING GP-CAB

231-1771 ALARM GP-TRAVEL

231-1771 ALARM GP-TRAVEL -BACKUP
S/N GAX1-UP
PART OF 503-6610, 503-6611, 505-1880, 507-8023, 507-8024, 532-6357, 540-2926 DISTRIBUTION AR

ALTERNATOR GP-CHARGING

117-0177 PULLEY GP-FAN & ALT DRIVE

117-0177 PULLEY GP-FAN & ALT DRIVE
S/N TXF5293-UP
3.34:1 DRIVE RATIO. 68.5 MM (2.9 IN) DIAMETER, 8 GROOVE
PART OF 424-8405 ENGINE AR-COMPLETE

235-7133 ALTERNATOR GP-CHARGING

235-7133 ALTERNATOR GP-CHARGING
S/N TXF5293-UP
24-VOLT, 80-AMPERE
PART OF 252-7132 ALTERNATOR GP-CHARGING

252-7132 ALTERNATOR GP-CHARGING

252-7132 ALTERNATOR GP-CHARGING
S/N TXF5293-UP
80-AMPERE
PART OF 424-8405 ENGINE AR-COMPLETE

BATTERY GP

336-6171 BATTERY & WIRING GP

336-6171 BATTERY & WIRING GP
S/N GAX1-UP
PART OF 456-0885 CHASSIS AR

CONTROL GP

342-3614 INSTALLATION AR

342-3614 INSTALLATION AR -WIPER, LOWER
S/N GAX1-UP
PART OF 495-9703, 503-6610 DISTRIBUTION AR, 505-5206, 506-8824, 532-6358 OPTION AR-CAB

CONTROL GP-ELECTRONIC

379-7123 CONTROL AR-COMMUNICATION

379-7123 CONTROL AR-COMMUNICATION -PRODUCT LINK CELLULAR
S/N GAX1-UP
PART OF 495-9703 DISTRIBUTION AR

503-6899 CONTROL AR-COMMUNICATION

503-6899 CONTROL AR-COMMUNICATION -PLE641
S/N GAX1-UP
PART OF 540-2926 DISTRIBUTION AR

503-6900 CONTROL AR-COMMUNICATION

503-6900 CONTROL AR-COMMUNICATION -PL631 SATELLITE
S/N GAX1-UP
PART OF 507-8024 DISTRIBUTION AR

ELECTRONICS GP-ENGINE

249-5278 CONTROL & MTG GP-ENGINE ELEK

249-5278 CONTROL & MTG GP-ENGINE ELEK
S/N TXF5293-UP
PART OF 424-8405 ENGINE AR-COMPLETE

ELECTRONICS GP-MACHINE

221-8872 CONTROL & MTG GP-MACHINE

221-8872 CONTROL & MTG GP-MACHINE
S/N GAX1-UP
PART OF 342-3618 OPERATOR AR

456-9468 ELECTRONICS GP-MACHINE

456-9468 ELECTRONICS GP-MACHINE -ELECTRONIC CONTROL MODULE
S/N GAX1-UP
HIGH HORSEPOWER
PART OF 456-0880 GENERAL AR

541-1456 ELECTRONICS GP-MACHINE

541-1456 ELECTRONICS GP-MACHINE
S/N GAX1-UP
PART OF 541-3408 SPECIAL AR

CONTROL GP-UNPROGRAMMED

351-8490 CONTROL GP-UNPROGRAMMED

351-8490 CONTROL GP-UNPROGRAMMED -PRODUCT LINK 522
S/N GAX1-UP
PART OF 376-6478 CONTROL GP-COMMUNICATION

440-2105 CONTROL GP-UNPROGRAMMED

440-2105 CONTROL GP-UNPROGRAMMED -PL641E CELLULAR
S/N GAX1-UP
PART OF 505-4859 CONTROL & MTG GP-COMMUNICATION

544-1881 CONTROL GP-UNPROGRAMMED

544-1881 CONTROL GP-UNPROGRAMMED
S/N GAX1-UP
PL631 SATELLITE
PART OF 505-4860 CONTROL & MTG GP-COMMUNICATION

LIGHTING GP

153-2521 LAMP GP-FLOOD

153-2521 LAMP GP-FLOOD
S/N GAX1-UP
24-VOLT
PART OF 238-2157 LIGHTING GP-FLOOD

153-2523 LAMP GP-FLOOD

153-2523 LAMP GP-FLOOD
S/N GAX1-UP
24-VOLT
PART OF 4I-5409 LIGHTING GP-FLOOD

167-3441 LAMP GP-FLOOD

167-3441 LAMP GP-FLOOD
S/N GAX1-UP
24-VOLT
PART OF 336-6153 LIGHTING GP-FLOOD

347-9427 LAMP GP-FLOOD

347-9427 LAMP GP-FLOOD -HID
S/N GAX1-UP
24-VOLT, 35-WATT
PART OF 299-3036 LIGHTING GP-FLOOD

238-2157 LIGHTING GP-FLOOD

238-2157 LIGHTING GP-FLOOD -BOOM
S/N GAX1-UP
PART OF 294-1252 BOOM AR-MASS, 294-1250 BOOM AR-REACH

299-3036 LIGHTING GP-FLOOD

299-3036 LIGHTING GP-FLOOD -BOOM
S/N GAX1-UP
HIGH INTENSITY DISCHARGE
CANNOT BE USED WITH @@@@@238-2157@@@@@

336-6153 LIGHTING GP-FLOOD

336-6153 LIGHTING GP-FLOOD -CAB
S/N GAX1-UP
PART OF 505-1880, 507-8024, 540-2926 DISTRIBUTION AR
CANNOT BE USED WITH @@@@@336-6154@@@@@

336-6154 LIGHTING GP-FLOOD

336-6154 LIGHTING GP-FLOOD -CAB GUARD
S/N GAX1-UP
PART OF 347-9844 OPTION AR-LIGHTING
CANNOT BE USED WITH @@@@@336-6153@@@@@

4I-5409 LIGHTING GP-FLOOD

4I-5409 LIGHTING GP-FLOOD -CHASSIS
S/N GAX1-UP
PART OF 456-0885 CHASSIS AR

PANEL GP-CIRCUIT BREAKER

336-6297 PANEL & MTG GP-CIRCUIT BREAKER

336-6297 PANEL & MTG GP-CIRCUIT BREAKER
S/N GAX1-UP
PART OF 342-3618 OPERATOR AR

342-2969 PANEL GP-CIRCUIT BREAKER

342-2969 PANEL GP-CIRCUIT BREAKER
S/N GAX1-UP
PART OF 336-6297 PANEL & MTG GP-CIRCUIT BREAKER

RECEPTACLE GP-AUXILIARY START

336-6219 WIRING GP-AUX START RECEPTACLE

336-6219 WIRING GP-AUX START RECEPTACLE
S/N GAX1-UP
PART OF 447-3411 OPTION AR-REGIONAL

SENSOR GP

354-0042 SENSOR GP-ENGINE

354-0042 SENSOR GP-ENGINE
S/N TXF5293-UP
PART OF 356-2433 ENGINE AR-CORE

222-8367 SENSOR GP-LIQUID LEVEL

222-8367 SENSOR GP-LIQUID LEVEL
S/N GAX1-UP
PART OF 456-0885 CHASSIS AR

382-2001 SENSOR GP-LIQUID LEVEL

382-2001 SENSOR GP-LIQUID LEVEL -WATER IN FUEL
S/N GAX1-UP
PART OF 222-8367 SENSOR GP-LIQUID LEVEL

257-2929 SENSOR GP-MACHINE LEVEL

257-2929 SENSOR GP-MACHINE LEVEL
S/N GAX1-UP

194-6725 SENSOR GP-PRESSURE

194-6725 SENSOR GP-PRESSURE
S/N GAX1-UP
PART OF 380-3958 LINES GP-FUEL

249-0096 SENSOR GP-PRESSURE

249-0096 SENSOR GP-PRESSURE
S/N TXF5293-UP
PART OF 354-0042 SENSOR GP-ENGINE

276-8548 SENSOR GP-PRESSURE

276-8548 SENSOR GP-PRESSURE
S/N TXF5293-UP
AMPSEAL CONNECTOR
PART OF 354-0042 SENSOR GP-ENGINE

434-8214 SENSOR GP-PRESSURE

434-8214 SENSOR GP-PRESSURE
S/N GAX1-UP
PART OF 292-7160 LINES GP-BOOM CYLINDER

300-9805 SENSOR GP-SPEED

300-9805 SENSOR GP-SPEED
S/N TXF5293-UP
PART OF 384-1836 SENSOR GP-SPEED

300-9806 SENSOR GP-SPEED

300-9806 SENSOR GP-SPEED
S/N TXF5293-UP
PART OF 354-0042 SENSOR GP-ENGINE

384-1836 SENSOR GP-SPEED

384-1836 SENSOR GP-SPEED
S/N TXF5293-UP
PART OF 354-0042 SENSOR GP-ENGINE

4P-5820 SENSOR GP-SPEED

4P-5820 SENSOR GP-SPEED
S/N TXF5293-UP
PART OF 313-2148 HOUSING GP-FLYWHEEL

234-5012 SENSOR GP-TEMPERATURE

234-5012 SENSOR GP-TEMPERATURE
S/N TXF5293-UP
PART OF 354-0042 SENSOR GP-ENGINE

234-5013 SENSOR GP-TEMPERATURE

234-5013 SENSOR GP-TEMPERATURE
PART OF 380-3958 LINES GP-FUEL, 354-0042 SENSOR GP-ENGINE

STARTING AID GP

222-8365 STARTING AID GP-ETHER

222-8365 STARTING AID GP-ETHER
S/N GAX1-UP
PART OF 447-3411 OPTION AR-REGIONAL

239-1134 VALVE GP-ETHER STARTING

239-1134 VALVE GP-ETHER STARTING
S/N GAX1-UP
PART OF 222-8365 STARTING AID GP-ETHER

STARTING MOTOR GP

3T-9525 PLATE AS-BRUSH

3T-9525 PLATE AS-BRUSH
S/N TXF5293-UP
PART OF 348-7651 STARTING MOTOR GP-ELECTRIC

348-7651 STARTING MOTOR GP-ELECTRIC

348-7651 STARTING MOTOR GP-ELECTRIC
S/N TXF5293-UP
24-VOLT
PART OF 369-0809 STARTING MOTOR GP-ELECTRIC

369-0809 STARTING MOTOR GP-ELECTRIC

369-0809 STARTING MOTOR GP-ELECTRIC
S/N TXF5293-UP
24-VOLT, 50-MT
PART OF 424-8405 ENGINE AR-COMPLETE
FOR USE WITH LEFT HAND STARTER APPLICATIONS

SWITCH GP

7N-0719 SWITCH GP-DISCONNECT

7N-0719 SWITCH GP-DISCONNECT -BATTERY
S/N GAX1-UP
PART OF 342-2969 PANEL GP-CIRCUIT BREAKER

125-1302 SWITCH GP-MAGNETIC

125-1302 SWITCH GP-MAGNETIC
S/N GAX1-UP
24-VOLT
PART OF 342-2969 PANEL GP-CIRCUIT BREAKER

275-1253 SWITCH GP-PRESSURE

275-1253 SWITCH GP-PRESSURE
S/N GAX1-UP
PART OF 380-3958 LINES GP-FUEL

319-4420 SWITCH GP-ROTARY

319-4420 SWITCH GP-ROTARY -THROTTLE POSITION
S/N GAX1-UP
PART OF 251-0542 PANEL GP-SWITCH

255-2751 SWITCH GP-START

255-2751 SWITCH GP-START -ENGINE, KEY
S/N GAX1-UP
PART OF 251-0542 PANEL GP-SWITCH

165-5970 SWITCH GP-TOGGLE

165-5970 SWITCH GP-TOGGLE
S/N GAX1-UP
PART OF 336-6171 BATTERY & WIRING GP

238-2208 SWITCH GP-WIPER

238-2208 SWITCH GP-WIPER -LOWER
S/N GAX1-UP
PART OF 342-3614 INSTALLATION AR

WIRING GP

336-6171 BATTERY & WIRING GP

336-6171 BATTERY & WIRING GP
S/N GAX1-UP
PART OF 456-0885 CHASSIS AR

241-7601 CONNECTION GP-ELECTRICAL

241-7601 CONNECTION GP-ELECTRICAL
S/N TXF5293-UP
PROVIDES ADDITIONAL 8-MM GROUND STUD BELOW ECM
PART OF 424-8405 ENGINE AR-COMPLETE

299-2598 FASTENER GP-WIRING HARNESS

299-2598 FASTENER GP-WIRING HARNESS -SYSTEM 1, 1-WAY, 1-PUMP
S/N GAX1-UP
PART OF 350-3311 CONTROL AR-AUXILIARY

342-3614 INSTALLATION AR

342-3614 INSTALLATION AR -WIPER, LOWER
S/N GAX1-UP
PART OF 495-9703, 503-6610 DISTRIBUTION AR, 505-5206, 506-8824, 532-6358 OPTION AR-CAB

235-8200 PLUG GP-CONNECTOR

235-8200 PLUG GP-CONNECTOR
S/N TXF5293-UP
PART OF 424-8405 ENGINE AR-COMPLETE

336-6219 WIRING GP-AUX START RECEPTACLE

336-6219 WIRING GP-AUX START RECEPTACLE
S/N GAX1-UP
PART OF 447-3411 OPTION AR-REGIONAL

336-6137 WIRING GP-CAB

336-6137 WIRING GP-CAB -COUPLER
S/N GAX1-UP
PART OF 344-4126 CONTROL AR-QUICK COUPLER

336-6253 WIRING GP-CAB

336-6253 WIRING GP-CAB -WORK AREA VISUAL SYSTEM, REAR
S/N GAX1-UP
PART OF 346-4448 CAMERA AR

336-6296 WIRING GP-CAB

336-6296 WIRING GP-CAB
S/N GAX1-UP
PART OF 342-3618 OPERATOR AR

493-8521 WIRING GP-CAB

493-8521 WIRING GP-CAB -CAMERA, SIDE
S/N GAX1-UP
PART OF 493-7178 CAMERA AR

336-6252 WIRING GP-CAMERA

336-6252 WIRING GP-CAMERA -WORK AREA VISUAL SYSTEM, REAR
S/N GAX1-UP
PART OF 346-4448 CAMERA AR

493-6941 WIRING GP-CHASSIS

493-6941 WIRING GP-CHASSIS -CAMERA, SIDE
S/N GAX1-UP
PART OF 493-7178 CAMERA AR

493-8519 WIRING GP-CHASSIS

493-8519 WIRING GP-CHASSIS -CAMERA, REAR
S/N GAX1-UP
PART OF 493-7178 CAMERA AR

336-6243 WIRING GP-COMMUNICATION

336-6243 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N GAX1-UP
PART OF 340-3893 INSTALLATION AR-COMMUNICATION

366-9348 WIRING GP-COMMUNICATION

366-9348 WIRING GP-COMMUNICATION -PRODUCT LINK 522
S/N GAX1-UP
PART OF 379-7123 CONTROL AR-COMMUNICATION

505-4862 WIRING GP-COMMUNICATION

505-4862 WIRING GP-COMMUNICATION
S/N GAX1-UP
PART OF 503-6899, 503-6900 CONTROL AR-COMMUNICATION

251-0433 WIRING GP-CONSOLE

251-0433 WIRING GP-CONSOLE
S/N GAX1-UP
PART OF 342-3618 OPERATOR AR

393-1282 WIRING GP-CONSOLE

393-1282 WIRING GP-CONSOLE -LH
S/N GAX1-UP
PART OF 251-0433 WIRING GP-CONSOLE

393-1283 WIRING GP-CONSOLE

393-1283 WIRING GP-CONSOLE -RH
S/N GAX1-UP
PART OF 251-0433 WIRING GP-CONSOLE

350-8247 WIRING GP-CONVERTER

350-8247 WIRING GP-CONVERTER
S/N GAX1-UP
12-VOLT, 10- AMPERE POWER SUPPLY
PART OF 495-9703, 503-6610 DISTRIBUTION AR, 505-5206, 506-8824, 532-6358 OPTION AR-CAB

354-0045 WIRING GP-ELECTRONIC CONTROL

354-0045 WIRING GP-ELECTRONIC CONTROL
S/N TXF5293-8664
PART OF 424-8405 ENGINE AR-COMPLETE
FOR USE WITH @@@@@354-0042@@@@@

354-0045 WIRING GP-ELECTRONIC CONTROL

354-0045 WIRING GP-ELECTRONIC CONTROL
S/N TXF8665-UP
PART OF 424-8405 ENGINE AR-COMPLETE
FOR USE WITH @@@@@354-0042@@@@@

299-2856 WIRING GP-FINE SWING

299-2856 WIRING GP-FINE SWING
S/N GAX1-UP
PART OF 456-0885 CHASSIS AR

336-5983 WIRING GP-PLATFORM

336-5983 WIRING GP-PLATFORM
S/N GAX1-UP
PART OF 342-3618 OPERATOR AR

336-6195 WIRING GP-QUICK COUPLER

336-6195 WIRING GP-QUICK COUPLER
S/N GAX1-UP
PART OF 344-4126 CONTROL AR-QUICK COUPLER

230-0961 WIRING GP-UNIT INJECTOR

230-0961 WIRING GP-UNIT INJECTOR
S/N TXF5293-UP
PART OF 356-2433 ENGINE AR-CORE

ELECTRONICS GP-MONITOR

221-8861 ELECTRONICS GP-MONITOR

221-8861 ELECTRONICS GP-MONITOR
S/N GAX1-UP
PART OF 456-0880 GENERAL AR

503-8026 ELECTRONICS GP-MONITOR

503-8026 ELECTRONICS GP-MONITOR
S/N GAX1-UP
PART OF 548-9082 MONITOR GP-OPERATOR

517-4913 ELECTRONICS GP-MONITOR

517-4913 ELECTRONICS GP-MONITOR
S/N GAX1-UP
PART OF 503-6899, 503-6900 CONTROL AR-COMMUNICATION

519-6935 ELECTRONICS GP-MONITOR

519-6935 ELECTRONICS GP-MONITOR -TELEMATICS
S/N GAX1-UP
CELLULAR
PART OF 503-6899 CONTROL AR-COMMUNICATION

519-6936 ELECTRONICS GP-MONITOR

519-6936 ELECTRONICS GP-MONITOR
S/N GAX1-UP
TELEMATICS SATELLITE
PART OF 503-6900 CONTROL AR-COMMUNICATION

HEATER GP

324-4136 HEATER GP-JACKET WATER

324-4136 HEATER GP-JACKET WATER -REAR
S/N GAX1-UP
120-VOLT
PART OF 447-3411 OPTION AR-REGIONAL

ELECTRONICS GP-COMMUNICATION

309-5842 CONTROL & MTG GP-COMMUNICATION

309-5842 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK 321SR
S/N GAX1-UP
PART OF 340-3893 INSTALLATION AR-COMMUNICATION

338-6892 CONTROL & MTG GP-COMMUNICATION

338-6892 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK 121SR
S/N GAX1-UP
PART OF 340-3893 INSTALLATION AR-COMMUNICATION

381-7372 CONTROL & MTG GP-COMMUNICATION

381-7372 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK CELLULAR
S/N GAX1-UP
PART OF 379-7123 CONTROL AR-COMMUNICATION

505-4859 CONTROL & MTG GP-COMMUNICATION

505-4859 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK CELLULAR
S/N GAX1-UP
PART OF 503-6899 CONTROL AR-COMMUNICATION

505-4860 CONTROL & MTG GP-COMMUNICATION

505-4860 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK
S/N GAX1-UP
PART OF 503-6900 CONTROL AR-COMMUNICATION

379-7123 CONTROL AR-COMMUNICATION

379-7123 CONTROL AR-COMMUNICATION -PRODUCT LINK CELLULAR
S/N GAX1-UP
PART OF 495-9703 DISTRIBUTION AR

503-6899 CONTROL AR-COMMUNICATION

503-6899 CONTROL AR-COMMUNICATION -PLE641
S/N GAX1-UP
PART OF 540-2926 DISTRIBUTION AR

503-6900 CONTROL AR-COMMUNICATION

503-6900 CONTROL AR-COMMUNICATION -PL631 SATELLITE
S/N GAX1-UP
PART OF 507-8024 DISTRIBUTION AR

376-6478 CONTROL GP-COMMUNICATION

376-6478 CONTROL GP-COMMUNICATION -PRODUCT LINK CELLULAR
S/N GAX1-UP
PART OF 381-7372 CONTROL & MTG GP-COMMUNICATION

417-4722 CONTROL GP-COMMUNICATION

417-4722 CONTROL GP-COMMUNICATION -PLE601 NETWORK MANAGER
S/N GAX1-UP
YELLOW KEY
PART OF 505-4859 CONTROL & MTG GP-COMMUNICATION

459-0786 CONTROL GP-COMMUNICATION

459-0786 CONTROL GP-COMMUNICATION
S/N GAX1-UP
PART OF 505-4860 CONTROL & MTG GP-COMMUNICATION, 417-4722 CONTROL GP-COMMUNICATION

262-1421 ELECTRONICS GP-COMMUNICATION

262-1421 ELECTRONICS GP-COMMUNICATION -PRODUCT LINK 300
S/N GAX1-UP
PART OF 309-5842 CONTROL & MTG GP-COMMUNICATION

340-3893 INSTALLATION AR-COMMUNICATION

340-3893 INSTALLATION AR-COMMUNICATION -PRODUCT LINK 321SR
S/N GAX1-UP
PART OF 505-1880 DISTRIBUTION AR

336-6243 WIRING GP-COMMUNICATION

336-6243 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N GAX1-UP
PART OF 340-3893 INSTALLATION AR-COMMUNICATION

366-9348 WIRING GP-COMMUNICATION

366-9348 WIRING GP-COMMUNICATION -PRODUCT LINK 522
S/N GAX1-UP
PART OF 379-7123 CONTROL AR-COMMUNICATION

505-4862 WIRING GP-COMMUNICATION

505-4862 WIRING GP-COMMUNICATION
S/N GAX1-UP
PART OF 503-6899, 503-6900 CONTROL AR-COMMUNICATION

338-6881 MOUNTING GP-ANTENNA

338-6881 MOUNTING GP-ANTENNA -PRODUCT LINK
S/N GAX1-UP
PART OF 340-3893 INSTALLATION AR-COMMUNICATION

381-7373 MOUNTING GP-ANTENNA

381-7373 MOUNTING GP-ANTENNA -PRODUCT LINK CELLULAR
S/N GAX1-UP
PART OF 379-7123 CONTROL AR-COMMUNICATION

473-4248 MOUNTING GP-ANTENNA

473-4248 MOUNTING GP-ANTENNA -PRODUCT LINK
S/N GAX1-UP
PART OF 503-6900 CONTROL AR-COMMUNICATION

477-9416 MOUNTING GP-ANTENNA

477-9416 MOUNTING GP-ANTENNA
S/N GAX1-UP
PART OF 503-6899 CONTROL AR-COMMUNICATION

BLOCK GP-JUNCTION

9W-0742 BLOCK GP-JUNCTION

9W-0742 BLOCK GP-JUNCTION
S/N GAX1-UP
PART OF 336-6171 BATTERY & WIRING GP

CAMERA GP

313-7833 CAMERA & MOUNTING GP

313-7833 CAMERA & MOUNTING GP -WORK AREA VISUAL SYSTEM, REAR
S/N GAX1-UP
PART OF 307-7757 MOUNTING GP-CAMERA

459-0359 CAMERA & MOUNTING GP

459-0359 CAMERA & MOUNTING GP -WORK AREA VISUAL SYSTEM, REAR
S/N GAX1-UP
PART OF 493-7178 CAMERA AR

492-8876 CAMERA & MOUNTING GP

492-8876 CAMERA & MOUNTING GP -SIDE VIEW
S/N GAX1-UP
PART OF 493-7178 CAMERA AR

346-4448 CAMERA AR

346-4448 CAMERA AR -WORK AREA VISUAL SYSTEM, REAR
S/N GAX1-UP
PART OF 495-9703, 540-2926 DISTRIBUTION AR

493-7178 CAMERA AR

493-7178 CAMERA AR -WORK AREA VISUAL SYSTEM, REAR
S/N GAX1-UP
PART OF 503-6610, 532-6357 DISTRIBUTION AR

336-6684 CAMERA GP

336-6684 CAMERA GP -WORK AREA VISUAL SYSTEM, REAR
S/N GAX1-UP
12-VOLT, 24-VOLT
PART OF 313-7833 CAMERA & MOUNTING GP

460-6371 CAMERA GP

460-6371 CAMERA GP -WORK AREA VISUAL SYSTEM, REAR
S/N GAX1-UP
PART OF 459-0359 CAMERA & MOUNTING GP

490-2633 CAMERA GP

490-2633 CAMERA GP -SIDE VIEW
S/N GAX1-UP
PART OF 492-8876 CAMERA & MOUNTING GP

307-7757 MOUNTING GP-CAMERA

307-7757 MOUNTING GP-CAMERA -WORK AREA VISUAL SYSTEM, REAR
S/N GAX1-UP
PART OF 346-4448 CAMERA AR

336-6252 WIRING GP-CAMERA

336-6252 WIRING GP-CAMERA -WORK AREA VISUAL SYSTEM, REAR
S/N GAX1-UP
PART OF 346-4448 CAMERA AR

RADIO GP

336-3545 RADIO GP-COMMUNICATION

336-3545 RADIO GP-COMMUNICATION -PRODUCT LINK 121SR
S/N GAX1-UP
PART OF 338-6892 CONTROL & MTG GP-COMMUNICATION

HARNESS GP

503-0793 HARNESS AS-CHASSIS

503-0793 HARNESS AS-CHASSIS
S/N GAX1-UP
PART OF 336-6171 BATTERY & WIRING GP

524-6970 HARNESS AS-CHASSIS

524-6970 HARNESS AS-CHASSIS -PRODUCT LINK
S/N GAX1-UP
PART OF 505-4862 WIRING GP-COMMUNICATION

385-2664 HARNESS AS-ENGINE

385-2664 HARNESS AS-ENGINE
S/N TXF5293-8664
PART OF 354-0045 WIRING GP-ELECTRONIC CONTROL
FOR USE WITH INDUSTRIAL AND COMMERCIAL APPLICATIONS WITH OCV SYSTEM
CANNOT BE USED WITH MACHINE APPLICATIONS INDUSTRIAL AND COMMERCIAL APPLICATIONS WITH NO OVC SYSTEM

495-9718 HARNESS AS-PANEL

495-9718 HARNESS AS-PANEL
S/N GAX1-UP
PART OF 251-0542 PANEL GP-SWITCH

516-4037 HARNESS AS-SENSOR

516-4037 HARNESS AS-SENSOR
S/N TXF8665-UP
PART OF 354-0045 WIRING GP-ELECTRONIC CONTROL

319-0956 HARNESS AS-SOLENOID

319-0956 HARNESS AS-SOLENOID
S/N GAX1-UP
PART OF 336-6171 BATTERY & WIRING GP

418-7614 HARNESS AS-WIRING

418-7614 HARNESS AS-WIRING
S/N TXF5293-UP
PART OF 230-0961 WIRING GP-UNIT INJECTOR

Information:

(For parts list, see above)

ELECTRICAL AND STARTING SYSTEM

ALARM GP

Operation and Maintenance Manual

Travel Alarm - Test - If Equipped
345D, 349D and 349D2 Excavators

Troubleshooting

MID 039 - CID 0271 - FMI 06
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

ALTERNATOR GP-CHARGING

Engine News

Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}

Operation and Maintenance Manual

Belt - Inspect/Adjust/Replace
345D, 349D and 349D2 Excavators

Special Instruction

Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}

Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}

Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}

Specifications

Alternator and Regulator
C11 and C13 Engines

Alternator Mounting
C11 and C13 Engines

Alternator and Regulator
C11 and C13 Engines

Alternator Mounting
C11 and C13 Engines

Alternator and Regulator
C11 and C13 Engines

Alternator Mounting
C11 and C13 Engines

Alternator and Regulator
C11 and C13 Engines

Testing and Adjusting

Charging System - Test
C11 and C13 Engines for Caterpillar Built Machines

Charging System - Test
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Troubleshooting

Alternator - Noisy Operation
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 0167 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0168 - FMI 05
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Disassembly and Assembly

Alternator - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Alternator - Remove and Install
345D and 349D Excavators C13 Engine Supplement

Service Magazine

Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}

BATTERY GP

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
345D, 349D and 349D2 Excavators

Battery - Clean
345D, 349D and 349D2 Excavators

Battery Hold-Down - Tighten
345D, 349D and 349D2 Excavators

Battery - Recycle
345D, 349D and 349D2 Excavators

Fuses - Replace
345D, 349D and 349D2 Excavators

Tool Operating Manual

M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}

M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}

Testing and Adjusting

Battery - Test
C11 and C13 Engines for Caterpillar Built Machines

Troubleshooting

CID 0168 FMI 01 System Voltage Low
C11 and C13 Engines for Caterpillar Built Machines

CID 0168 FMI 02 System Voltage intermittent/erratic
C11 and C13 Engines for Caterpillar Built Machines

CID 0168 FMI 00 System Voltage High
C11 and C13 Engines for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 0167 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0168 - FMI 05
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Disassembly and Assembly

Battery - Remove and Install
345D and 349D Excavators C13 Engine Supplement

Service Magazine

Improved Battery Group Is Now Used on Certain Excavators, Mobile Hydraulic Power Units, and Wheeled Excavators {1401}
Improved Battery Group Is Now Used on Certain Excavators, Mobile Hydraulic Power Units, and Wheeled Excavators {1401}

CONTROL GP-ELECTRONIC

Operation and Maintenance Manual

Product Link - PL631 - If Equipped
Regulatory Compliance Information

Product Link - PL641 - If Equipped
Regulatory Compliance Information

General Information
Regulatory Compliance Information

Product Link - PL631V2 - If Equipped
Regulatory Compliance Information

Systems Operation

Electronic Control System
345D, 349D and 349D2 Excavators Hydraulic System

Service Magazine

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

ELECTRONICS GP-ENGINE

Engine News

A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Special Instruction

Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}

Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ^® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}

Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}

Troubleshooting

ECM Will Not Communicate with Other Systems or Display Modules
C11 and C13 Engines for Caterpillar Built Machines

Self-Diagnostics
C11 and C13 Engines for Caterpillar Built Machines

Flash Programming
C11 and C13 Engines for Caterpillar Built Machines

System Overview
C11 and C13 Engines for Caterpillar Built Machines

Electronic Service Tool Will Not Communicate with ECM
C11 and C13 Engines for Caterpillar Built Machines

Programming Parameters
C11 and C13 Engines for Caterpillar Built Machines

Event Codes
C11 and C13 Engines for Caterpillar Built Machines

CID 0268 FMI 02 Check Programmable Parameters
C11 and C13 Engines for Caterpillar Built Machines

CID 0248 FMI 12 Cat Data Link failed
C11 and C13 Engines for Caterpillar Built Machines

CID 0248 FMI 09 Cat Data Link not communicating
C11 and C13 Engines for Caterpillar Built Machines

System Configuration Parameters
C11 and C13 Engines for Caterpillar Built Machines

Cat Data Link Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

User Defined Shutdown Input Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Diagnostic Codes
C11 and C13 Engines for Caterpillar Built Machines

Replacing the ECM
C11 and C13 Engines for Caterpillar Built Machines

ECM Will Not Accept Factory Passwords
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 0590 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Disassembly and Assembly

Engine Control Module - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Engine Electronic Control - Remove and Install
345D and 349D Excavators C13 Engine Supplement

Service Magazine

New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
New Machine Software for Cat^® Product Link Is Now Available on Certain Cat^® Products {7490, 7606, 7610, 7620}

ELECTRONICS GP-POWER TRAIN

Special Instruction

ELECTRONICS GP-IMPLEMENT

Troubleshooting

Sensor Supply - Test
C11 and C13 Engines for Caterpillar Built Machines

ELECTRONICS GP-MACHINE

Engine News

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Operation and Maintenance Manual

Machine Security System - If Equipped
345D, 349D and 349D2 Excavators

Product Link - PL631 - If Equipped
Regulatory Compliance Information

Product Link - PL641 - If Equipped
Regulatory Compliance Information

Machine Security System - MSS3i and MSS S1 - If Equipped
Regulatory Compliance Information

General Information
Regulatory Compliance Information

Product Link - PL631V2 - If Equipped
Regulatory Compliance Information

Special Instruction

Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN EXCAVATORS AND MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN EXCAVATORS AND MATERIAL HANDLERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-China

Service Letter-Asia

Systems Operation

General Information
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

System Operation
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Diagnostic Operation
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electronic Control Module (Machine)
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Related Components
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Service Letter-APD

Testing and Adjusting

Electronic Control Module (ECM) - Flash Program
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electronic Control Module (ECM) - Replace
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Calibration
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Glossary of Electrical Terms
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electronic Control Module (ECM) - Configure
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Troubleshooting

General Information
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0041 - FMI 06
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Diagnostic Code List
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Event Code List
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0248 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0262 - FMI 06
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0254 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0246 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0247 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

E-Ceiling and Cab Avoidance - Troubleshoot
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Service Magazine

CONTROL GP-UNPROGRAMMED

Service Letter-NACD

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-China

Service Letter-Asia

Systems Operation

Electronic Control Module (Machine)
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Service Letter-APD

Testing and Adjusting

Electronic Control Module (ECM) - Flash Program
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electronic Control Module (ECM) - Replace
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electronic Control Module (ECM) - Configure
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

ELECTRICAL GP

Operation and Maintenance Manual

General Information
Regulatory Compliance Information

ELECTRONICS GP

Special Instruction

Cat® VIMS Converter Functionality {7610, 7620}
Cat^® VIMS Converter Functionality {7610, 7620}

2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat^® Products {1408}

Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}

Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}

Technical Information Bulletin

Cat® Product Link PL631/PLE631 Deactivated when Shipped Out of Caterpillar Xuzhou China on Certain Excavators {7606}
Cat^® Product Link PL631/PLE631 Deactivated when Shipped Out of Caterpillar Xuzhou China on Certain Excavators {7606}

Service Magazine

New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat^® Product Link {7606, 7610, 7620}

A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}

A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}

Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat^® Products {1400}

LIGHTING GP

Operation and Maintenance Manual

High Intensity Discharge Lamp (HID) - Replace - If Equipped
345D, 349D and 349D2 Excavators

Specifications

Boom Lighting
345D, 349D and 349D2 Excavator Machine System Specifications

Chassis Lighting
345D, 349D and 349D2 Excavator Machine System Specifications

Service Magazine

An Improved Halogen Lamp is Now Available for Certain Excavators {1434}
An Improved Halogen Lamp is Now Available for Certain Excavators {1434}

PANEL GP-CIRCUIT BREAKER

Operation and Maintenance Manual

Circuit Breakers - Reset
345D, 349D and 349D2 Excavators

Special Instruction

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Troubleshooting

MID 039 - CID 2280 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

PANEL GP-FUSE

Special Instruction

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

SENDER GP

Systems Operation

Senders
345D, 349D and 349D2 Excavators Tool Control System

SENSOR GP

Special Instruction

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Technical Information Bulletin

Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}

Specifications

Engine Oil Pressure Sensor
C11 and C13 Engines

Coolant Temperature Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Inlet Manifold Temperature Sensor
C11 and C13 Engines

Inlet Manifold Air Pressure Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Fuel Temperature Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Coolant Temperature Sensor
C11 and C13 Engines

Fuel Temperature Sensor
C11 and C13 Engines

Inlet Manifold Temperature Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Inlet Manifold Air Pressure Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Fuel Temperature Sensor
C11 and C13 Engines

Liquid Level Sensor (Water Separator)
C11 and C13 Engines

Coolant Temperature Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Coolant Temperature Sensor
C11 and C13 Engines

Fuel Temperature Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Fuel Pressure Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Inlet Manifold Temperature Sensor - Charge Air Cooler Outlet
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Inlet Manifold Air Pressure Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Fuel Pressure Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Inlet Manifold Air Pressure Sensor
C11 and C13 Engines

Inlet Manifold Temperature Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Inlet Manifold Temperature Sensor
C11 and C13 Engines

Fuel Temperature Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Systems Operation

Sensors
345D, 349D and 349D2 Excavators Tool Control System

Sensors
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Reuse And Salvage Guidelines

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Troubleshooting

CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0261 FMI 13 Engine Timing Calibration required
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0094 FMI 03 Fuel Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0094 FMI 04 Fuel Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

Engine Speed/Timing Sensor Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C11 and C13 Engines for Caterpillar Built Machines

5 Volt Engine Pressure Sensor Supply Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Engine Temperature Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Engine Speed/Timing Sensor - Calibrate
C11 and C13 Engines for Caterpillar Built Machines

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C11 and C13 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C11 and C13 Engines for Caterpillar Built Machines

CID 0190 FMI 08 Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 0041 - FMI 06
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0190 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0262 - FMI 06
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1130 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1960 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1968 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1968 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1968 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1969 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1969 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1969 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2265 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2265 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2265 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2266 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2266 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2266 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 3012 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 3012 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 3012 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1130 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1130 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1609 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1609 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1609 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Sensor Signal (Analog, Active) - Test
C11 and C13 Engines for Caterpillar Built Machines

Sensor Supply - Test
C11 and C13 Engines for Caterpillar Built Machines

Disassembly and Assembly

Fuel Temperature Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Boost Pressure Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Inlet Air Temperature Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Atmospheric Pressure Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Camshaft Position Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Engine Oil Pressure Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Crankshaft Position Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

SOLENOID GP

Troubleshooting

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C11 and C13 Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C11 and C13 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

STARTING AID GP

Operation and Maintenance Manual

Ether Starting Aid Cylinder - Replace - If Equipped
345D, 349D and 349D2 Excavators

Engine Starting
345D, 349D and 349D2 Excavators

Specifications

Ether Starting Aid
345D, 349D and 349D2 Excavator Machine System Specifications

Troubleshooting

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C11 and C13 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C11 and C13 Engines for Caterpillar Built Machines

Ether Injection System - Test
C11 and C13 Engines for Caterpillar Built Machines

Disassembly and Assembly

Ether Start Valve - Remove and Install
345D and 349D Excavators C13 Engine Supplement

STARTING MOTOR GP

Special Instruction

Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}

Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}

Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}

Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}

Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}

Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat^® Products {1453}

Specifications

Electric Starting Motor
C11 and C13 Engines

Testing and Adjusting

Electric Starting System - Test
C11 and C13 Engines for Caterpillar Built Machines

Pinion Clearance - Adjust
C11 and C13 Engines for Caterpillar Built Machines

Disassembly and Assembly

Electric Starting Motor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Electric Starting Motor - Remove and Install
345D and 349D Excavators C13 Engine Supplement

SWITCH GP

Operation and Maintenance Manual

Battery Disconnect Switch
345D, 349D and 349D2 Excavators

Special Instruction

Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}

Specifications

Engine Oil Level Switch - If Equipped
C11 and C13 Engines

Systems Operation

Switches
345D, 349D and 349D2 Excavators Tool Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines

Switches
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Troubleshooting

Fuel Filter Differential Pressure Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 1960 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Service Magazine

Improved Start Switch Assembly is Now Used on Certain Cat® Products {1416}
Improved Start Switch Assembly is Now Used on Certain Cat^® Products {1416}

TOOLS

Tool Operating Manual

NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}

NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}

M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Service Tools
345D, 349D and 349D2 Excavators Tool Control System

Troubleshooting

Electronic Service Tool Will Not Communicate with ECM
C11 and C13 Engines for Caterpillar Built Machines

Electronic Service Tools
C11 and C13 Engines for Caterpillar Built Machines

Factory Passwords
C11 and C13 Engines for Caterpillar Built Machines

Service Tools
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Using Caterpillar Electronic Technician to Determine Diagnostic Codes
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Service Magazine

A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

VALVE GP

Systems Operation

Solenoid Valve (Proportional Reducing) - Power Shift System
345D, 349D and 349D2 Excavators Hydraulic System

WARNING GP

Testing and Adjusting

Overload Warning - Set - If Equipped
345D, 349D and 349D2 Excavators Hydraulic System

WIRING GP

Operation and Maintenance Manual

Battery Disconnect Switch
345D, 349D and 349D2 Excavators

Battery or Battery Cable - Inspect/Replace
345D, 349D and 349D2 Excavators

Battery - Recycle
345D, 349D and 349D2 Excavators

SmartBoom Operation - If Equipped
345D, 349D and 349D2 Excavators

SmartBoom Control - If Equipped
345D, 349D and 349D2 Excavators

Power Receptacle - If Equipped
345D, 349D and 349D2 Excavators

Camera Harness - Disconnect and Connect
345D, 349D and 349D2 Excavators

Fuses - Replace
345D, 349D and 349D2 Excavators

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Master Guide for Field Installation of 459-8880 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 5057, 5059, 5063, 7405, 7553, 7557}
Master Guide for Field Installation of 459-8880 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 5057, 5059, 5063, 7405, 7553, 7557}

Installation of the 469-5771 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 3108, 5057, 5059, 5063, 5070, 5073, 5459, 7405, 7553, 7557}
Installation of the 469-5771 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 3108, 5057, 5059, 5063, 5070, 5073, 5459, 7405, 7553, 7557}

Installation of the 467-6749 Chassis Wiring Gp on Certain Hydraulic Excavators {1408}
Installation of the 467-6749 Chassis Wiring Gp on Certain Hydraulic Excavators {1408}

Specifications

Electronic Unit Injector Wiring
C11 and C13 Engines

Systems Operation

Relays
345D, 349D and 349D2 Excavators Tool Control System

Senders
345D, 349D and 349D2 Excavators Tool Control System

Sensors
345D, 349D and 349D2 Excavators Tool Control System

Switches
345D, 349D and 349D2 Excavators Tool Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines

Sensors
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Switches
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C11 and C13 Engines for Caterpillar Built Machines

Wiring Harness (Open Circuit) - Test
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Overload Warning - Set - If Equipped
345D, 349D and 349D2 Excavators Hydraulic System

System Schematic
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Connector - Inspect
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Troubleshooting

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C11 and C13 Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C11 and C13 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C11 and C13 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C11 and C13 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C11 and C13 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C11 and C13 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C11 and C13 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C11 and C13 Engines for Caterpillar Built Machines

CID 0190 FMI 08 Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 05
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Component and Connector Locations
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Service Magazine

CONNECTION GP

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}

ELECTRONICS GP-MONITOR

Engine News

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Operation and Maintenance Manual

Monitoring System
345D, 349D and 349D2 Excavators

General Information
Regulatory Compliance Information

Special Instruction

Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}

Installation Of Operator ID System on Cat® and Non-Cat Products {7600, 7610, 7620}
Installation Of Operator ID System on Cat^® and Non-Cat Products {7600, 7610, 7620}

Cat® VIMS Converter Functionality {7610, 7620}
Cat^® VIMS Converter Functionality {7610, 7620}

Technical Information Bulletin

Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}

Systems Operation

Setting Mode
D Series Excavator Monitoring System

Maintenance Information Mode
D Series Excavator Monitoring System

Service Mode
D Series Excavator Monitoring System

Password Change Mode
D Series Excavator Monitoring System

Password Entry
D Series Excavator Monitoring System

Device Test Mode
D Series Excavator Monitoring System

Override Mode
D Series Excavator Monitoring System

Tool Program Mode
D Series Excavator Monitoring System

Output Components
D Series Excavator Monitoring System

Status Mode
D Series Excavator Monitoring System

Input Components
D Series Excavator Monitoring System

Data Link
D Series Excavator Monitoring System

Prestart Monitoring Function
D Series Excavator Monitoring System

General Information
D Series Excavator Monitoring System

Warning Operation
D Series Excavator Monitoring System

Maintenance Mode
D Series Excavator Monitoring System

ECM Information Mode
D Series Excavator Monitoring System

Diagnostic Mode
D Series Excavator Monitoring System

Menu Outline
D Series Excavator Monitoring System

Calibration Mode
D Series Excavator Monitoring System

Performance Mode
D Series Excavator Monitoring System

Configuration Mode
D Series Excavator Monitoring System

Troubleshooting

CID 0286 FMI 05 EMS Oil Lamp open/short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0286 FMI 06 EMS Oil Lamp short to +batt
C11 and C13 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Service Magazine

New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat^® Product Link {7606, 7610, 7620}

HEATER GP

Operation and Maintenance Manual

Engine Starting
345D, 349D and 349D2 Excavators

ELECTRONICS GP-WORK TOOL

Special Instruction

ELECTRONICS GP-COMMUNICATION

Engine News

A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}

Operation and Maintenance Manual

Product Link
345D, 349D and 349D2 Excavators

Product Link - PL631 - If Equipped
Regulatory Compliance Information

Product Link - PL641 - If Equipped
Regulatory Compliance Information

Wireless Device - EC520 - If Equipped
Regulatory Compliance Information

Wireless Device - TD520 - If Equipped
Regulatory Compliance Information

Wireless Device - MS995, MS975, MS955 Receiver - If Equipped
Regulatory Compliance Information

General Information
Regulatory Compliance Information

Product Link - PL631V2 - If Equipped
Regulatory Compliance Information

Special Instruction

Installation Procedure for Product Link PL522 and PL523 (Cellular) {7606}
Installation Procedure for Product Link PL522 and PL523 (Cellular) {7606}

Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620}
Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620}

Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606}
Installation of Remote Disable Module (RDM) Kit on Cat^® and Non-Cat Equipment {7606}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Service Letter-China

Service Letter-Asia

Service Letter-APD

Service Magazine

Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}
Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}

CAMERA GP

Operation and Maintenance Manual

Camera Harness - Disconnect and Connect
345D, 349D and 349D2 Excavators

Camera
345D, 349D and 349D2 Excavators

Camera - Clean/Adjust - If Equipped
345D, 349D and 349D2 Excavators

Technical Information Bulletin

Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}

ELECTRONICS GP-GENERATOR SET

Special Instruction

ANTENNA GP

Specifications

Antenna
345D, 349D and 349D2 Excavator Machine System Specifications

HARNESS GP

Special Instruction

Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat® Products Equipped with BR Series Connectors {1408}
Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat^® Products Equipped with BR Series Connectors {1408}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Magazine

New Chassis Harness Assembly in the Communication Wiring Group Is Now Used on Certain 349D2 Excavators {1408}
New Chassis Harness Assembly in the Communication Wiring Group Is Now Used on Certain 349D2 Excavators {1408}