AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

354-0045 WIRING GP-ELECTRONIC CONTROL S/N TXF8665-UP PART OF 424-8405 ENGINE AR-COMPLETE FOR USE WITH @@@@@354-0042@@@@@ 349D2


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 349D2 EXCAVATOR GAX
 349D2 L Excavator GAX00001-UP (MACHINE) POWERED BY C13 Engine M0071924 349D2 GAX   (2016)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CONVERTER
350-8247 WIRING GP-CONVERTER
WIRING GP-ELECTRONIC CONTROL
354-0045 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
354-0045 WIRING GP-ELECTRONIC CONTROL
WIRING GP-FINE SWING
299-2856 WIRING GP-FINE SWING
WIRING GP-PLATFORM
336-5983 WIRING GP-PLATFORM
WIRING GP-QUICK COUPLER
336-6195 WIRING GP-QUICK COUPLER
 

#M00719240250
 

354-0045: WIRING GP-ELECTRONIC CONTROL

354-0045 WIRING GP-ELECTRONIC CONTROL
S/N TXF8665-UP
PART OF 424-8405 ENGINE AR-COMPLETE
FOR USE WITH @@@@@354-0042@@@@@
i07478369 M0071924
3540045 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 C [16] STRAP-CABLE  
2. 516-4037 CY [1] HARNESS AS-SENSOR (ENGINE)  
3. 132-5789 C [2] CLIP (LADDER)  
4. 156-6175 [2] CLIP (LADDER)  
5. 2Y-5829 M [2] NUT (M10X1.5-THD)  
6. 352-3970 [1] CLIP (LADDER)  
7. 4P-7581 C [4] CLIP (LADDER)  
8. 4P-8134 C [2] CLIP (LADDER)  
9. 5P-9085 [1] CLIP (LOOP)  
10. 6V-3918 M [1] BOLT (M8X1.25X50-MM)  
11. 6V-5839 C [7] WASHER (11X21X2.5-MM THK)  
12. 6V-8212 CM [6] BOLT (M10X1.5X16-MM)  
13. 6V-8836 M [2] BOLT (M6X1X14-MM)  
14. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
15. 9X-2097 M [1] STUD (M8X1.25-THD)  
16. 9X-8267 [2] WASHER (6.6X12X2-MM THK)  
17. 8M-9124 [1] WASHER (10X22.5X8-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00719240251
 

299-2856: WIRING GP-FINE SWING

299-2856 WIRING GP-FINE SWING
S/N GAX1-UP
PART OF 456-0885 CHASSIS AR
i04586410 M0071924
2992856 WIRING GP-FINE SWING Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [3] STRAP-CABLE  
2. 111-4836 [1] CLIP  
3. 111-4837 [2] CLIP  
4. 238-2171 [1] BRACKET AS  
5. 299-3027 [1] HARNESS AS-VALVE (FINE SWING)  
  103-2529 E HOSE (50-CM)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS,WEDGE & INTERFACE SEAL)
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
6. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
8. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#M00719240252
 

336-5983: WIRING GP-PLATFORM

336-5983 WIRING GP-PLATFORM
S/N GAX1-UP
PART OF 342-3618 OPERATOR AR
i06701204 M0071924
3365983 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-2342 [1] STRAP AS-GROUND  
2. 3E-5169 [1] GUARD-SWITCH (SECONDARY SHUTDOWN)  
3. 3S-2093 [3] STRAP-CABLE  
4. 7K-1181 [13] STRAP-CABLE  
5. 111-4837 [5] CLIP  
6. 111-4838 [2] CLIP  
7. 111-4839 [2] STRAP  
8. 116-0118 [11] CLIP  
9. 234-1122 [1] COVER  
10. 251-0299 [1] HARNESS AS-SWITCH (SECONDARY SHUTDOWN)  
  2L-8074 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
11. 467-7448 [1] HARNESS AS-PLATFORM  
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [13] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [27] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [24] STRAP-CABLE  
  8N-1546 [1] PIN-CONNECTOR (6-GA)  
  8T-8737 [26] PLUG-SEAL  
  102-7964 [1] PLUG-CONNECTOR (16-PIN)  
  102-7965 [17] TERMINAL (FEMALE)  
  9W-0852 [9] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [41] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  116-0255 [1] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 BE TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  121-1039 [1] TERMINAL (MALE)  
  121-1168 [2] CONNECTOR-RECEPTACLE  
  121-1173 [34] TERMINAL (MALE)  
  125-4766 [1] PLUG-CONNECTOR (17-PIN)  
  125-4841 [1] WEDGE-PLUG LOCK (21-PIN)  
  125-7874 BE TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)  
  125-7875 BE TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)  
  9X-3402 [55] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [55] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  127-5484 [1] RECEPTACLE AS-CONNECTOR (1-PIN)  
  2L-8050 [1] TERMINAL-RING (6-GA, 1/4-IN SCREW)  
    -OR-
  2L-8058 [1] TERMINAL-RING (8-GA, 1/4-IN SCREW)  
  2L-8052 [2] TERMINAL-RING (6-GA, 3/8-IN SCREW)  
    -OR-
  2L-8060 [2] TERMINAL-RING (8-GA, 3/8-IN SCREW)  
  2L-8069 [2] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  134-3296 [1] HOUSING-PLUG  
  134-3297 [2] SEAL  
  9X-3401 [25] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [25] PIN-CONNECTOR (14-GA TO 16-GA)  
  153-2620 [1] PLUG AS-CONNECTOR (54-PIN, BLACK)  
  163-6759 [1] SEAL  
  155-2270 [6] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [2] DIODE  
  230-4009 [3] PLUG AS-CONNECTOR (12-PIN)  
    (EACH INCLUDES)
  264-7034 [1] SEAL-CONNECTOR  
  230-4011 [3] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  230-5010 [3] PLUG AS-CONNECTOR (6-PIN)  
    (EACH INCLUDES)
  264-7032 [1] SEAL-CONNECTOR  
  238-2363 [10] TERMINAL (FEMALE)  
  238-2366 [7] TERMINAL (MALE)  
  239-7352 [1] PLUG AS-CONNECTOR (6-PIN)  
  264-7032 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  243-4508 [2] RECEPTACLE AS-CONNECTOR (6-PIN)  
  243-4509 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  243-4510 [2] RECEPTACLE AS-CONNECTOR (12-PIN)  
  342-2972 [1] CAP-CONNECTOR (2-PIN)  
  342-2974 [3] CAP-CONNECTOR (6-PIN)  
12. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
13. 4D-1836 [1] SWITCH-TOGGLE (SECONDARY SHUTDOWN)  
14. 7X-2621 M [6] BOLT (M10X1.5X12-MM)  
15. 8T-0337 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
16. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#M00719240253
 

336-6195: WIRING GP-QUICK COUPLER

336-6195 WIRING GP-QUICK COUPLER
S/N GAX1-UP
PART OF 344-4126 CONTROL AR-QUICK COUPLER
i06710922 M0071924
3366195 WIRING GP-QUICK COUPLER Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 7I-2673 [1] STRAP-CABLE  
3. 7K-1181 [20] STRAP-CABLE  
4. 342-3138 [1] HARNESS AS-QUICK COUPLER  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  125-7874 BE TUBE-HEAT SHRINK (5.72-MM DIA)  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
5. 4P-7428 [1] CLIP (LADDER)  
6. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#M00719240254
 

230-0961: WIRING GP-UNIT INJECTOR

230-0961 WIRING GP-UNIT INJECTOR
S/N TXF5293-UP
PART OF 356-2433 ENGINE AR-CORE
i04574935 M0071924
2300961 WIRING GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-6508 [6] CAP AS  
2. 418-7614 Y [1] HARNESS AS-WIRING (UNIT INJECTOR)  
3. 6V-8837 M [5] BOLT (M6X1X16-MM)  
4. 6V-8836 M [2] BOLT (M6X1X14-MM)  
5. 9X-8267 [2] WASHER (6.6X12X2-MM THK)  
6. 237-9960 [5] CLIP (LADDER)  
7. 3S-2093 [5] STRAP-CABLE  
8. 5P-0537 [5] WASHER-HARD (7.2X14.5X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00719240255
 

353-0604: DRIVE GP-FINAL

353-0604 DRIVE GP-FINAL -WITHOUT MOTOR
S/N GAX1-UP
PART OF 462-4341 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@480-7429@@@@@
i06815614 M0071924
3530604 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2R-0525 [2] CUP-BEARING  
2. 7Y-0667 [2] RING-RETAINING  
3. 7Y-0808 B [1] SHIM (1.6-MM THK)  
4. 7Y-1469 [1] COUPLING  
5. 7Y-1472 B [1] SHIM (0.15-MM THK)  
6. 7Y-1473 B [1] SHIM (0.3-MM THK)  
7. 7Y-1474 B [1] SHIM (0.4-MM THK)  
8. 7Y-1475 B [1] SHIM (0.5-MM THK)  
9. 7Y-1476 B [1] SHIM (0.6-MM THK)  
10. 7Y-1477 B [1] SHIM (0.7-MM THK)  
11. 7Y-1478 B [1] SHIM (0.8-MM THK)  
12. 7Y-1479 B [1] SHIM (1-MM THK)  
13. 7Y-1480 B [1] SHIM (1.6-MM THK)  
14. 7Y-1493 [1] SPACER (8.7X50X14-MM THK)  
15. 114-1541 [6] PIN-DOWEL  
16. 136-2898 [14] WASHER (58.3X89X1-MM THK)  
17. 191-2690 [6] WASHER (42.3X70X1-MM THK)  
18. 199-4719 [1] GEAR-COUPLING  
19. 227-6048 [12] WASHER (26X40X4-MM THK)  
20. 255-2272 [1] SEAL GP-DUO-CONE  
  205-9114 [2] RING-TORIC  
21. 296-6185 [4] SHAFT (PLANET)  
22. 296-6195 [3] SHAFT (PLANET)  
23. 296-6248 [3] BEARING AS-ROLLER  
24. 333-2927 [1] GEAR-SUN (18-TEETH)(15-TEETH)  
25. 333-2928 [1] GEAR-SUN (21-TEETH)(21-TEETH)  
26. 333-2929 [1] GEAR-SUN (21-TEETH)(21-TEETH)  
27. 333-2930 [3] GEAR-PLANETARY (21-TEETH)(21-TEETH)  
28. 333-2931 [3] GEAR-PLANETARY (20-TEETH)(20-TEETH)  
29. 333-2932 [4] GEAR-PLANETARY (20-TEETH)(20-TEETH)  
30. 333-2936 [1] CARRIER AS  
31. 333-2938 [1] CARRIER-PLANETARY  
32. 333-2939 [1] CARRIER-PLANETARY  
33. 333-2942 [1] SPACER (183X209.6X8.5-MM THK)  
34. 480-7403 [1] COVER  
35. 333-2960 [1] GEAR-RING  
36. 333-3033 [1] HOUSING-MOTOR  
37. 333-3035 [1] PLATE  
38. 346-5216 [11] BEARING-NEEDLE  
39. 346-5556 [2] CONE-BEARING  
40. 353-0605 [1] HOUSING-GEAR  
41. 451-2176 [28] WASHER-HARD (22X35X3.5-MM THK)  
42. 451-2182 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 143-0811 M [20] BOLT (12X1.75X35-MM)  
44. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
45. 096-8058 [3] RING-RETAINING  
46. 238-6588 [7] PIN-SPRING  
47. 3E-2338 [2] PLUG-PIPE  
48. 4S-5924 [1] SEAL-O-RING  
49. 6V-8133 M [12] BOLT (M24X3X80-MM)  
50. 6V-8200 M [20] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
51. 7M-8485 [2] SEAL-O-RING  
52. 7Y-1492 [2] SPACER (67X101.1X10-MM THK)  
53. 7Y-5217 M [28] BOLT-SOCKET HEAD (M20X2.5X70-MM)  
54. 8C-5240 [1] SEAL-O-RING  
55. 5P-8245 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#M00719240256
 

460-4988: DRIVE GP-FINAL

460-4988 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N GAX1-UP
PART OF 227-6042 POWER TRAIN AR
i06815587 M0071924
4604988 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-6399 Y [1] SPROCKET GP (NON-SEGMENTED)  
2. 462-4341 Y [1] DRIVE GP-FINAL  
  Y   SEPARATE ILLUSTRATION
 

#M00719240257
 

462-4341: DRIVE GP-FINAL

462-4341 DRIVE GP-FINAL -WITH MOTOR
S/N GAX1-UP
PART OF 460-4988 DRIVE GP-FINAL
i06815593 M0071924
4624341 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 353-0604 Y [1] DRIVE GP-FINAL  
2. 417-7195 Y [1] MOTOR & MTG GP-TRAVEL  
  Y   SEPARATE ILLUSTRATION
 

#M00719240258
 

480-7429: DRIVE GP-FINAL

480-7429 DRIVE GP-FINAL -WITHOUT MOTOR
S/N GAX1-UP
FIELD REPLACEMENT ORDER @@@@@504-1674@@@@@, @@@@@518-1212@@@@@
FIELD REPLACEMENT FOR @@@@@353-0604@@@@@
i06870448 M0071924
4807429 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2R-0525 [2] CUP-BEARING  
2. 7Y-0667 [2] RING-RETAINING  
3. 7Y-0808 B [1] SHIM (1.6-MM THK)  
4. 7Y-1469 [1] COUPLING  
5. 7Y-1472 B [1] SHIM (0.15-MM THK)  
6. 7Y-1473 B [1] SHIM (0.3-MM THK)  
7. 7Y-1474 B [1] SHIM (0.4-MM THK)  
8. 7Y-1475 B [1] SHIM (0.5-MM THK)  
9. 7Y-1476 B [1] SHIM (0.6-MM THK)  
10. 7Y-1477 B [1] SHIM (0.7-MM THK)  
11. 7Y-1478 B [1] SHIM (0.8-MM THK)  
12. 7Y-1479 B [1] SHIM (1-MM THK)  
13. 7Y-1480 B [1] SHIM (1.6-MM THK)  
14. 7Y-1493 [1] SPACER (8.7X50X14-MM THK)  
15. 114-1541 [6] PIN-DOWEL  
16. 136-2898 [14] WASHER (58.3X89X1-MM THK)  
17. 191-2690 [6] WASHER (42.3X70X1-MM THK)  
18. 199-4719 [1] GEAR-COUPLING  
19. 227-6048 [12] WASHER (26X40X4-MM THK)  
20. 255-2272 [1] SEAL GP-DUO-CONE  
  205-9114 [2] RING-TORIC  
21. 296-6185 [4] SHAFT (PLANET)  
22. 296-6195 [3] SHAFT (PLANET)  
23. 296-6248 [3] BEARING AS-ROLLER  
24. 333-2927 [1] GEAR-SUN (18-TEETH)(15-TEETH)  
25. 333-2928 [1] GEAR-SUN (21-TEETH)(21-TEETH)  
26. 333-2929 [1] GEAR-SUN (21-TEETH)(21-TEETH)  
27. 333-2930 [3] GEAR-PLANETARY (21-TEETH)(21-TEETH)  
28. 333-2931 [3] GEAR-PLANETARY (20-TEETH)(20-TEETH)  
29. 333-2932 [4] GEAR-PLANETARY (20-TEETH)(20-TEETH)  
30. 333-2936 [1] CARRIER AS  
31. 333-2938 [1] CARRIER-PLANETARY  
32. 333-2939 [1] CARRIER-PLANETARY  
33. 333-2942 [1] SPACER (183X209.6X8.5-MM THK)  
34. 480-7403 [1] COVER  
35. 333-2960 [1] GEAR-RING  
36. 333-3033 [1] HOUSING-MOTOR  
37. 333-3035 [1] PLATE  
38. 346-5216 [11] BEARING-NEEDLE  
39. 346-5556 [2] CONE-BEARING  
40. 353-0605 [1] HOUSING-GEAR  
41. 451-2176 [28] WASHER-HARD (22X35X3.5-MM THK)  
42. 451-2182 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 143-0811 M [20] BOLT (12X1.75X35-MM)  
44. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
45. 096-8058 [3] RING-RETAINING  
46. 238-6588 [7] PIN-SPRING  
47. 3E-2338 [2] PLUG-PIPE  
48. 4S-5924 [1] SEAL-O-RING  
49. 6V-8133 M [12] BOLT (M24X3X80-MM)  
50. 6V-8200 M [20] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
51. 7M-8485 [2] SEAL-O-RING  
52. 7Y-1492 [2] SPACER (67X101.1X10-MM THK)  
53. 7Y-5217 M [28] BOLT-SOCKET HEAD (M20X2.5X70-MM)  
54. 8C-5240 [1] SEAL-O-RING  
55. 5P-8245 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#M00719240259
 

504-1673: DRIVE GP-FINAL

504-1673 DRIVE GP-FINAL -WITH MOTOR, LH
S/N GAX1-UP
PART OF 518-1209 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@511-6019@@@@@
i06893809 M0071924
5041673 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 417-7195 Y [1] MOTOR & MTG GP-TRAVEL  
2. 504-1674 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR, LH)  
3. 095-1269 M [1] SETSCREW-SOCKET (M10X1.5-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Battery Disconnect Switch
345D, 349D and 349D2 Excavators
Battery or Battery Cable - Inspect/Replace
345D, 349D and 349D2 Excavators
Battery - Recycle
345D, 349D and 349D2 Excavators
SmartBoom Operation - If Equipped
345D, 349D and 349D2 Excavators
SmartBoom Control - If Equipped
345D, 349D and 349D2 Excavators
Power Receptacle - If Equipped
345D, 349D and 349D2 Excavators
Camera Harness - Disconnect and Connect
345D, 349D and 349D2 Excavators
Fuses - Replace
345D, 349D and 349D2 Excavators
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Master Guide for Field Installation of <NOBR>459-8880</NOBR> Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 5057, 5059, 5063, 7405, 7553, 7557}
Master Guide for Field Installation of 459-8880 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 5057, 5059, 5063, 7405, 7553, 7557}
Installation of the <NOBR>469-5771</NOBR> Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 3108, 5057, 5059, 5063, 5070, 5073, 5459, 7405, 7553, 7557}
Installation of the 469-5771 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 3108, 5057, 5059, 5063, 5070, 5073, 5459, 7405, 7553, 7557}
Installation of the <NOBR>467-6749</NOBR> Chassis Wiring Gp on Certain Hydraulic Excavators {1408}
Installation of the 467-6749 Chassis Wiring Gp on Certain Hydraulic Excavators {1408}
Specifications
Electronic Unit Injector Wiring
C11 and C13 Engines
Electronic Unit Injector Wiring
C11 and C13 Engines
Systems Operation
Relays
345D, 349D and 349D2 Excavators Tool Control System
Senders
345D, 349D and 349D2 Excavators Tool Control System
Sensors
345D, 349D and 349D2 Excavators Tool Control System
Switches
345D, 349D and 349D2 Excavators Tool Control System
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines
Sensors
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Switches
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
C11 and C13 Engines for Caterpillar Built Machines
Wiring Harness (Open Circuit) - Test
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Wiring Harness (Short Circuit) - Test
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Overload Warning - Set - If Equipped
345D, 349D and 349D2 Excavators Hydraulic System
System Schematic
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Electrical Connector - Inspect
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Troubleshooting
CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C11 and C13 Engines for Caterpillar Built Machines
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C11 and C13 Engines for Caterpillar Built Machines
Electrical Connectors - Inspect
C11 and C13 Engines for Caterpillar Built Machines
CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C13 Engines for Caterpillar Built Machines
CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C11 and C13 Engines for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C13 Engines for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C13 Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines
Fuel Filter Differential Pressure Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines
CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
CID 0174 FMI 04 Fuel Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines
CID 2417 FMI 05 Ether Injection Control Solenoid current low
C11 and C13 Engines for Caterpillar Built Machines
CID 2417 FMI 06 Ether Injection Control Solenoid current high
C11 and C13 Engines for Caterpillar Built Machines
Sensors and Electrical Connectors
C11 and C13 Engines for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines
Throttle Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines
MID 039 - CID 0096 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C11 and C13 Engines for Caterpillar Built Machines
Low Engine Oil Pressure Lamp Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines
CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C11 and C13 Engines for Caterpillar Built Machines
CID 0190 FMI 08 Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines
MID 039 - CID 0096 - FMI 05
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0110 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0110 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0586 - FMI 05
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0586 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2280 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Electrical Component and Connector Locations
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0588 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0588 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0600 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Service Magazine
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 349D2 :

WIRING GP-ELECTRONIC CONTROL
354-0045 WIRING GP-ELECTRONIC CONTROL
WIRING GP-CONVERTER
350-8247 WIRING GP-CONVERTER
WIRING GP-CONSOLE
393-1283 WIRING GP-CONSOLE
WIRING GP-CONSOLE
393-1282 WIRING GP-CONSOLE
251-0433 WIRING GP-CONSOLE
WIRING GP-COMMUNICATION
505-4862 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
366-9348 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
336-6243 WIRING GP-COMMUNICATION
WIRING GP-FINE SWING
299-2856 WIRING GP-FINE SWING
WIRING GP-PLATFORM
336-5983 WIRING GP-PLATFORM
WIRING GP-QUICK COUPLER
336-6195 WIRING GP-QUICK COUPLER
WIRING GP-UNIT INJECTOR
230-0961 WIRING GP-UNIT INJECTOR
DRIVE GP-FINAL
353-0604 DRIVE GP-FINAL
DRIVE GP-FINAL
460-4988 DRIVE GP-FINAL
DRIVE GP-FINAL
462-4341 DRIVE GP-FINAL
DRIVE GP-FINAL
480-7429 DRIVE GP-FINAL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.