AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

348-6300 BLADE GP-ANGLING S/N BG91-UP Type 2 AN ATTACHMENT D6K2 TRACK-TYPE TRACTOR


WORK TOOLS
BLADE GP
GROUND ENGAGING TOOLS (G.E.T.)

TRACK-TYPE TRACTOR D6K2 TRACK-TYPE TRACTOR EL7
 D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERED BY C4.4 ENGINE M0072160 D6K2 EL7   (2016)

WORK TOOLS

BLADE GP
BLADE & EDGE GP-ANGLING
483-9320 BLADE & EDGE GP-ANGLING
BLADE GP-ANGLING
348-6280 BLADE GP-ANGLING
BLADE GP-ANGLING
348-6280 BLADE GP-ANGLING
BLADE GP-ANGLING
348-6300 BLADE GP-ANGLING
BLADE GP-ANGLING
348-6300 BLADE GP-ANGLING
BLADE GP-ANGLING
371-0749 BLADE GP-ANGLING
BLADE GP-ANGLING
371-0779 BLADE GP-ANGLING
SHIM GP-SPECIAL
498-6447 SHIM GP-SPECIAL
 

#M00721600740
 

348-6300: BLADE GP-ANGLING

348-6300 BLADE GP-ANGLING
S/N BG91-UP
Type 2
AN ATTACHMENT
i07455247 M0072160
3486300 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6K2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [3] RETAINER  
3. 9J-4782 [1] PROTECTOR  
4. 089-8249 [2] SPACER (64X72X13-MM THK)  
5. 104-4817 [1] PIN  
6. 223-3279 [1] RETAINER  
7. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
8. 466-2917 [2] SPACER (51.2X57X23-MM THK)  
9. 342-8850 Y [1] EDGE GP-CUTTING  
10. 348-6260 B [6] SHIM (1.5-MM THK)  
11. [1] BLADE AS-ANGLING  
  9C-6809 M [2] BLOCK (M10X1.5-MM)  
  9R-3761 M [1] BOSS (M10X1.5X51-MM)  
11A. 456-9700 [1] BEARING  
  9R-2672 M [2] BOSS-THREADED (M10X1.5X120-MM)  
12. 358-2194 [3] PIN  
13. 477-0065 [1] PLATE AS  
14. 359-3371 [4] SPACER (50X58X16-MM THK)  
15. 490-1616 [2] CAP-BEARING  
16. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
17. 8T-5878 M [8] BOLT (M24X3X80-MM)  
18. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
19. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
20. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
21. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
23. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
25. 541-3521 C [1] COVER  
26. 541-3522 C [1] BRACKET AS  
27. 466-2918 [2] SPACER (51.2X57X10-MM THK)  
28. 8T-4137 CM [4] BOLT (M10X1.5X20-MM)  
29. 8T-4136 CM [5] BOLT (M10X1.5X25-MM)  
30. 8T-4121 C [9] WASHER-HARD (11X21X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00721600741
 

371-0749: BLADE GP-ANGLING

371-0749 BLADE GP-ANGLING -FOLDABLE
S/N DWN1-UP
AN ATTACHMENT
i06691448 M0072160
3710749 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6K2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [3] RETAINER  
3. 8D-3791 [3] PIN  
4. 9J-4782 [3] PROTECTOR  
5. 089-8249 [2] SPACER (64X72X13-MM THK)  
6. 104-4817 [1] PIN  
7. 223-3279 [1] RETAINER  
8. [1] PLATE & FILM GP  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
9. 437-9738 [2] DOWEL AS  
10. 466-2917 [2] SPACER (51.2X57X23-MM THK)  
11. 266-4761 [2] PIN AS  
12. 358-2194 [3] PIN  
13. 477-0065 [1] PLATE AS  
14. 358-2260 [1] ARM AS-SUPPORT  
15. 359-3371 [4] SPACER (50X58X16-MM THK)  
16. [1] BLADE AS (LH)  
  8P-9770 [1] PLATE  
17. [1] BLADE AS (RH)  
17A. 456-9700 [1] BEARING  
  450-3991 [1] PLATE AS  
  9R-3761 M [1] BOSS (M10X1.5X51-MM)  
18. 371-0759 Y [1] EDGE GP-BIT & CUTTING  
19. 490-1616 [2] CAP-BEARING  
20. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
21. 7D-1649 [2] WASHER-HARD (13.5X32X5-MM THK)  
22. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
23. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
24. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
25. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
27. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
28. 8T-5878 M [8] BOLT (M24X3X80-MM)  
29. 348-6260 B [6] SHIM (1.5-MM THK)  
30. 466-2918 [2] SPACER (51.2X57X10-MM THK)  
31. B [6] SHIM (0.5-MM THK)  
32. 450-3992 [1] COVER  
33. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
34. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
35. 2U-9234 [2] BUSHING  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00721600742
 

371-0779: BLADE GP-ANGLING

371-0779 BLADE GP-ANGLING -FOLDABLE
S/N GJJ1-UP
AN ATTACHMENT
i06709310 M0072160
3710779 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6K2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [3] RETAINER  
3. 8D-3791 [3] PIN  
4. 089-8249 [2] SPACER (64X72X13-MM THK)  
5. 104-4817 [1] PIN  
6. 223-3279 [1] RETAINER  
7. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
8. 266-4761 [2] PIN AS  
9. 358-2194 [3] PIN  
10. 358-2260 [1] ARM AS-SUPPORT  
11. 359-3371 [4] SPACER (50X58X16-MM THK)  
12. 371-0808 Y [1] EDGE GP-BIT & CUTTING  
13. 490-1616 [2] CAP-BEARING  
14. 437-9738 [2] DOWEL AS  
15. 450-3992 [1] COVER  
16. 477-0065 [1] PLATE AS  
17. [1] BLADE AS (RH)  
17A. 456-9700 [1] BEARING  
  9R-3761 M [1] BOSS (M10X1.5X51-MM)  
  450-3991 [1] PLATE AS  
18. [1] BLADE AS (LH)  
  8P-9770 [1] PLATE  
20. 466-2917 [2] SPACER (51.2X57X23-MM THK)  
21. 466-2918 [2] SPACER (51.2X57X10-MM THK)  
22. 2U-9234 [2] BUSHING  
23. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
24. 7D-1649 [2] WASHER-HARD (13.5X32X5-MM THK)  
25. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
26. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
27. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
28. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
29. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
30. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
31. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
32. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
33. 8T-5878 M [8] BOLT (M24X3X80-MM)  
34. 9J-4782 [3] PROTECTOR  
35. 348-6260 B SHIM (1.5-MM THK)  
36. 498-6447 BY [2] SHIM GP-SPECIAL  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00721600743
 

325-0002: EDGE GP-BIT & CUTTING

325-0002 EDGE GP-BIT & CUTTING
S/N BB91-UP
PART OF 348-6280 BLADE GP-ANGLING
AN ATTACHMENT
i06691439 M0072160
3250002 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6K2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-9379 [1] BIT-END (RH)  
2. 8E-9378 [1] BIT-END (LH)  
3. 2J-3506 [26] NUT-FULL (3/4-10-THD)  
4. 5J-4773 [26] BOLT-PLOW (3/4-10X2.5-IN)  
5. 5P-8248 [26] WASHER-HARD (20X36.5X3.5-MM THK)  
6. 8E-7245 [2] EDGE-CUTTING  
 

#M00721600744
 

371-0759: EDGE GP-BIT & CUTTING

371-0759 EDGE GP-BIT & CUTTING
S/N DWN1-UP
PART OF 371-0749 BLADE GP-ANGLING
FOR USE WITH FOLDABLE BLADE
AN ATTACHMENT
i06691451 M0072160
3710759 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6K2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
2. 8E-9379 [1] BIT-END (RH)  
3. 300-0168 [1] BIT-END (LH)  
4. 342-8851 [1] EDGE-CUTTING  
5. 371-0758 [1] EDGE-CUTTING  
6. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
7. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#M00721600745
 

371-0808: EDGE GP-BIT & CUTTING

371-0808 EDGE GP-BIT & CUTTING
S/N GJJ1-UP
PART OF 483-9320 BLADE & EDGE GP-ANGLING, 371-0779 BLADE GP-ANGLING
FOR USE WITH FOLDABLE BLADE
AN ATTACHMENT
i06709318 M0072160
3710808 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6K2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-9379 [1] BIT-END (RH)  
2. 297-1699 [1] BIT-END  
3. 371-0786 [1] EDGE-CUTTING  
4. 2J-3506 [26] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [26] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [26] WASHER-HARD (20X36.5X3.5-MM THK)  
7. 8E-7245 [1] EDGE-CUTTING  
 

#M00721600746
 

507-2843: EDGE GP-BIT & CUTTING

507-2843 EDGE GP-BIT & CUTTING
S/N EL71-UP; MGM1-UP
GENERAL DUTY
FIELD INSTALLATION
i07311497 M0072160
5072843 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6K2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 140-6787 [1] BIT-END (RH)  
2. 140-6788 [1] BIT-END (LH)  
3. 342-8851 [2] EDGE-CUTTING  
4. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#M00721600747
 

507-2844: EDGE GP-BIT & CUTTING

507-2844 EDGE GP-BIT & CUTTING
S/N EL71-UP; MGM1-UP
EXTENDED
FIELD INSTALLATION
i07313727 M0072160
5072844 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6K2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-5407 [1] BIT-END (RH)  
2. 4T-5408 [1] BIT-END (LH)  
3. 484-2299 [2] EDGE-CUTTING  
4. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#M00721600748
 

522-4004: EDGE GP-BIT & CUTTING

522-4004 EDGE GP-BIT & CUTTING
S/N MGM1-UP
FIELD INSTALLATION
i07030624 M0072160
5224004 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6K2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 462-4828 [1] BIT-END (RH)  
2. 462-4829 [1] BIT-END (LH)  
3. 484-2299 [2] EDGE-CUTTING  
4. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#M00721600749
 

342-8850: EDGE GP-CUTTING

342-8850 EDGE GP-CUTTING
S/N BG91-UP
PART OF 348-6300 BLADE GP-ANGLING
AN ATTACHMENT
i05898704 M0072160
3428850 EDGE GP-CUTTING Parts scheme
  For full view, you need register

Parts for your D6K2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
2. 8E-9378 [1] BIT-END (LH)  
3. 8E-9379 [1] BIT-END (RH)  
4. 342-8851 [2] EDGE-CUTTING  
5. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
6. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

Information:

Caterpillar Parts SIS Catalog D6K2 :

BLADE GP-ANGLING
348-6300 BLADE GP-ANGLING
BLADE GP-ANGLING
348-6280 BLADE GP-ANGLING
BLADE GP-ANGLING
348-6280 BLADE GP-ANGLING
BLADE & EDGE GP-ANGLING
483-9320 BLADE & EDGE GP-ANGLING
BIT-END
462-4829 BIT-END
BIT-END
462-4828 BIT-END
WIPER GP-WINDOW
484-8213 WIPER GP-WINDOW
WINDOW GP-SLIDING
388-1411 WINDOW GP-SLIDING
BLADE GP-ANGLING
371-0749 BLADE GP-ANGLING
BLADE GP-ANGLING
371-0779 BLADE GP-ANGLING
EDGE GP-BIT & CUTTING
325-0002 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
371-0759 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
371-0808 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2843 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2844 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
522-4004 EDGE GP-BIT & CUTTING
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.