516-8011 BLADE AR-ANGLING S/N SGG1-UP FOR USE WITH @@@@@522-5190@@@@@ AN ATTACHMENT D6N XL TRACK-TYPE TRACTOR

Part No	Qty	Parts name
522-7374 Y	[1]	BLADE & EDGE GP-ANGLING
453-0763 Y	[1]	WIRING GP-GRADE CONTROL (BLADE)
Y		SEPARATE ILLUSTRATION

#M00721660931

358-2259: BLADE GP-ANGLING

358-2259 BLADE GP-ANGLING
S/N NJN1-156
PART OF 480-8596 BLADE AR-ANGLING
AN ATTACHMENT

i06717612 M0072166

For full view, you need register

Parts for your D6N XL TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	3B-8489	[3]	FITTING-GREASE (1/8-27 PTF)
2.	4T-0231	[3]	RETAINER
3.	089-8249	[2]	SPACER (64X72X13-MM THK)
4.	104-4817	[1]	PIN
5.	223-3279	[1]	RETAINER
6.		[1]	PLATE & FILM GP
	8T-7371	[1]	PLATE-SERIAL NUMBER
	4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
7.	257-0207 Y	[1]	EDGE GP-BIT & CUTTING (ANGLING)
8.	266-4761	[2]	PIN AS
9.	358-2227	[3]	PIN
10.	383-3376	[1]	ARM AS-SUPPORT
11.	437-9738	[2]	DOWEL AS
12.	450-3992	[1]	COVER
13.		[1]	BLADE AS (RH)
13A.	456-9700	[1]	BEARING
15.	466-2917	[6]	SPACER (51.2X57X23-MM THK)
16.	477-0065	[1]	PLATE AS
17.	490-1616	[2]	CAP-BEARING
18.	2U-9234	[2]	BUSHING
19.	5P-1076	[4]	WASHER-HARD (13.5X30X4-MM THK)
20.	7D-1649	[2]	WASHER-HARD (13.5X32X5-MM THK)
21.	8D-3791	[3]	PIN
22.	8T-4123	[1]	WASHER (22X35X3.5-MM THK)
23.	8T-4167	[8]	WASHER-HARD (26X44X4-MM THK)
24.	8T-4183 M	[6]	BOLT (M12X1.75X40-MM)
25.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
26.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
27.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
28.	8T-4956 M	[3]	BOLT (M12X1.75X35-MM)
29.	8T-5460 M	[1]	BOLT (M20X2.5X40-MM)
30.	8T-5878 M	[8]	BOLT (M24X3X80-MM)
31.	9J-4782	[3]	PROTECTOR
32.	348-6260 B	[6]	SHIM (1.5-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#M00721660932

359-3349: BLADE GP-ANGLING

359-3349 BLADE GP-ANGLING
S/N YAC1-UP
PART OF 480-8598 BLADE AR-ANGLING
AN ATTACHMENT

i06713246 M0072166

For full view, you need register

Parts for your D6N XL TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	3B-8489	[3]	FITTING-GREASE (1/8-27 PTF)
2.	4T-0231	[5]	RETAINER
3.	8D-3791	[3]	PIN
4.	9J-4782	[3]	PROTECTOR
5.	089-8249	[2]	SPACER (64X72X13-MM THK)
6.	104-4817	[1]	PIN
7.	177-4548	[1]	PIN
8.	223-3279	[1]	RETAINER
9.		[1]	PLATE & FILM GP
	4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
	8T-7371	[1]	PLATE-SERIAL NUMBER (BLADE)
10.	437-9738 C	[2]	DOWEL AS
11.	257-8150 Y	[1]	EDGE GP-BIT & CUTTING
12.	259-2968 C	[4]	SPACER (52.4X57X23-MM THK)
13.	266-4761	[2]	PIN AS
14.	348-6260 B	[6]	SHIM (1.5-MM THK)
15.	477-0065 C	[1]	PLATE AS
16.	358-2227	[3]	PIN
17.	358-2260	[1]	ARM AS-SUPPORT
18.	358-2270	[1]	BRACKET AS
19.	370-5549	[1]	PIN
20.	C	[1]	BLADE AS (RH)
20A.	9R-3761 M	[1]	BOSS (M10X1.5X51-MM)
20B.	450-3991	[1]	PLATE AS
20C.	456-9700	[1]	BEARING
21.	C	[1]	BLADE AS (LH)
21A.	8P-9770	[1]	PLATE
22.	383-3377	[2]	CAP-BEARING
23.	5P-1076	[4]	WASHER-HARD (13.5X30X4-MM THK)
24.	7D-1649 C	[2]	WASHER-HARD (13.5X32X5-MM THK)
25.	8T-5878 M	[8]	BOLT (M24X3X80-MM)
26.	8T-4123	[1]	WASHER (22X35X3.5-MM THK)
27.	8T-4167	[8]	WASHER-HARD (26X44X4-MM THK)
28.	8T-4183 M	[6]	BOLT (M12X1.75X40-MM)
29.	8T-4223	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
30.	8T-4956 M	[5]	BOLT (M12X1.75X35-MM)
31.	8T-5460 M	[1]	BOLT (M20X2.5X40-MM)
33.	450-3992 C	[1]	COVER
34.	8T-4224 C	[2]	WASHER-HARD (8.8X16X2-MM THK)
35.	8T-4189 CM	[2]	BOLT (M8X1.25X20-MM)
36.	2U-9234 C	[2]	BUSHING
37.	466-2917 C	[2]	SPACER (51.2X57X23-MM THK)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#M00721660933

483-9280: BLADE GP-ANGLING

483-9280 BLADE GP-ANGLING
S/N ENN1-UP
FOLDABLE
PART OF 480-8596 BLADE AR-ANGLING
Type 1
AN ATTACHMENT

i06831855 M0072166

For full view, you need register

Parts for your D6N XL TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	3B-8489	[3]	FITTING-GREASE (1/8-27 PTF)
2.	4T-0231	[3]	RETAINER
3.	089-8249	[2]	SPACER (64X72X13-MM THK)
4.	104-4817	[1]	PIN
5.	223-3279	[1]	RETAINER
6.		[1]	PLATE & FILM GP
	4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
	8T-7371	[1]	PLATE-SERIAL NUMBER
7.	257-0207 Y	[1]	EDGE GP-BIT & CUTTING (ANGLING)
8.	358-2227	[3]	PIN
9.	358-2260	[1]	ARM AS-SUPPORT
10.	383-3364	[2]	CAP-BEARING
11.	450-3992	[1]	COVER
12.	466-2917	[6]	SPACER (51.2X57X23-MM THK)
13.	477-0065	[1]	PLATE AS
14.		[1]	BLADE AS-RH
14A.	456-9700	[1]	BEARING
16.	483-9298	[2]	BOSS
17.	483-9299	[2]	RETAINER
18.	505-7081	[2]	PIN AS
19.	484-0217	[2]	PIN AS
20.	144-5478	[2]	BOLT (M20X2.5X130-MM)
21.	328-4847	[2]	SPACER (28X17.5X13-MM THK)
22.	3E-9411	[2]	WASHER-HARD (17.5X38X6-MM THK)
23.	5P-1076	[4]	WASHER-HARD (13.5X30X4-MM THK)
24.	8D-3791	[3]	PIN
25.	8T-4123	[1]	WASHER (22X35X3.5-MM THK)
26.	8T-4167	[8]	WASHER-HARD (26X44X4-MM THK)
27.	8T-4183 M	[4]	BOLT (M12X1.75X40-MM)
28.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
29.	8T-4193 M	[2]	BOLT (M16X2X50-MM)
30.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
31.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
32.	8T-4956 M	[3]	BOLT (M12X1.75X35-MM)
33.	8T-5460 M	[1]	BOLT (M20X2.5X40-MM)
34.	8T-5878 M	[8]	BOLT (M24X3X80-MM)
35.	9J-4782	[3]	PROTECTOR
36.	348-6260 B	[6]	SHIM (1.5-MM THK)
37.	483-9315 B	[20]	SHIM (0.5-MM THK)
38.	484-0219 B	[12]	SHIM (0.5-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#M00721660934

483-9280: BLADE GP-ANGLING

483-9280 BLADE GP-ANGLING
S/N ENN1-UP
FOLDABLE
PART OF 480-8596 BLADE AR-ANGLING
Type 2
AN ATTACHMENT

i07704541 M0072166

For full view, you need register

Parts for your D6N XL TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	3B-8489	[3]	FITTING-GREASE (1/8-27 PTF)
2.	4T-0231	[3]	RETAINER
3.	089-8249	[2]	SPACER (64X72X13-MM THK)
4.	104-4817	[1]	PIN
5.	223-3279	[1]	RETAINER
6.		[1]	PLATE & FILM GP
	4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
	8T-7371	[1]	PLATE-SERIAL NUMBER
7.	257-0207 Y	[1]	EDGE GP-BIT & CUTTING (ANGLING)
8.	358-2227	[3]	PIN
9.	358-2260	[1]	ARM AS-SUPPORT
10.	490-1616 C	[2]	CAP-BEARING
11.	450-3992	[1]	COVER
12.	466-2917	[6]	SPACER (51.2X57X23-MM THK)
13.	477-0065	[1]	PLATE AS
14.		[1]	BLADE AS-RH
14A.	456-9700	[1]	BEARING
16.	483-9298	[2]	BOSS
17.	483-9299	[2]	RETAINER
18.	505-7081 C	[2]	PIN AS
19.	484-0217 C	[1]	PIN AS
20.	144-5478	[2]	BOLT (M20X2.5X130-MM)
21.	328-4847 C	[1]	SPACER (28X17.5X13-MM THK)
22.	3E-9411 C	[1]	WASHER-HARD (17.5X38X6-MM THK)
23.	5P-1076	[4]	WASHER-HARD (13.5X30X4-MM THK)
24.	232-4810 C	[3]	PIN
25.	8T-4123	[1]	WASHER (22X35X3.5-MM THK)
26.	8T-4167	[8]	WASHER-HARD (26X44X4-MM THK)
27.	8T-4183 M	[4]	BOLT (M12X1.75X40-MM)
28.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
29.	8T-4193 CM	[1]	BOLT (M16X2X50-MM)
30.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
31.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
32.	8T-4956 M	[3]	BOLT (M12X1.75X35-MM)
33.	8T-5460 M	[1]	BOLT (M20X2.5X40-MM)
34.	114-6099 M	[8]	BOLT (M24X3X80-MM)
35.	9J-4782	[3]	PROTECTOR
36.	348-6260 B	[6]	SHIM (1.5-MM THK)
37.	483-9315 B	[20]	SHIM (0.5-MM THK)
38.	484-0219 B	[12]	SHIM (0.5-MM THK)
39.	505-7069 C	[1]	PIN
40.	500-4763 C	[1]	PLATE
41.	8T-4184 CM	[2]	BOLT (M12X1.75X45-MM)
42.	7D-1649 C	[2]	WASHER-HARD (13.5X32X5-MM THK)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#M00721660935

257-0207: EDGE GP-BIT & CUTTING

257-0207 EDGE GP-BIT & CUTTING
S/N ENN1-UP; NJN1-156
PART OF 358-2259, 483-9280 BLADE GP-ANGLING
FOR USE WITH FOLDABLE BLADE
AN ATTACHMENT

i03626238 M0072166

For full view, you need register

Parts for your D6N XL TRACK-TYPE TRACTOR:

Part No	Qty	Parts name
8E-9379	[1]	BIT-END (RH)
5J-4773	[22]	BOLT-PLOW (3/4-10X2.5-IN)
3G-4282	[1]	EDGE-CUTTING
257-0264	[1]	EDGE-CUTTING
257-0265	[1]	EDGE-CUTTING
2J-3506	[22]	NUT-FULL (3/4-10-THD)
5P-8248	[22]	WASHER-HARD (20X36.5X3.5-MM THK)

#M00721660936

257-8150: EDGE GP-BIT & CUTTING

257-8150 EDGE GP-BIT & CUTTING
S/N YAC1-UP; FLM1-UP
PART OF 483-9300 BLADE & EDGE GP-ANGLING, 359-3349 BLADE GP-ANGLING
AN ATTACHMENT

i06713288 M0072166

2578150 EDGE GP-BIT & CUTTING Parts scheme

For full view, you need register

Parts for your D6N XL TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	8E-9378	[1]	BIT-END (LH)
2.	8E-9379	[1]	BIT-END (RH)
3.	278-2168	[2]	EDGE-CUTTING
4.	278-2169	[1]	EDGE-CUTTING
5.	278-2170	[1]	EDGE-CUTTING
6.	2J-3506	[28]	NUT-FULL (3/4-10-THD)
7.	5J-4773	[28]	BOLT-PLOW (3/4-10X2.5-IN)
8.	5P-8248	[28]	WASHER-HARD (20X36.5X3.5-MM THK)

#M00721660937

3G-4210: EDGE GP-BIT & CUTTING

3G-4210 EDGE GP-BIT & CUTTING -LEVEL CUT
S/N NJN1-UP
19-MM (0.7-IN) THICK. REVERSIBLE
FIELD INSTALLATION

i07279099 M0072166

3G4210 EDGE GP-BIT & CUTTING Parts scheme

For full view, you need register

Parts for your D6N XL TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	3G-4282	[2]	EDGE-CUTTING
2.	3G-4285	[2]	BIT-END
3.	2J-3506	[22]	NUT-FULL (3/4-10-THD)
4.	5J-4773	[22]	BOLT-PLOW (3/4-10X2.5-IN)
5.	5P-8248	[22]	WASHER-HARD (20X36.5X3.5-MM THK)

#M00721660938

4T-2314: EDGE GP-BIT & CUTTING

4T-2314 EDGE GP-BIT & CUTTING
S/N AA31-UP; SGG1-UP
PART OF 359-3410, 386-7276, 522-7374 BLADE & EDGE GP-ANGLING
AN ATTACHMENT

i06712777 M0072166

4T2314 EDGE GP-BIT & CUTTING Parts scheme

For full view, you need register

Parts for your D6N XL TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	8E-9378	[1]	BIT-END (LH)
	8E-9379	[1]	BIT-END (RH)
2.	4T-2315	[2]	EDGE-CUTTING
3.	5J-4773	[28]	BOLT-PLOW (3/4-10X2.5-IN)
	2J-3506	[28]	NUT-FULL (3/4-10-THD)
	5P-8248	[28]	WASHER-HARD (20X36.5X3.5-MM THK)

#M00721660939

507-2847: EDGE GP-BIT & CUTTING

507-2847 EDGE GP-BIT & CUTTING -GENERAL DUTY
S/N NJN1-UP
FIELD INSTALLATION

i06939275 M0072166

5072847 EDGE GP-BIT & CUTTING Parts scheme

For full view, you need register

Parts for your D6N XL TRACK-TYPE TRACTOR: