BASIC ENGINE
HOUSING GP-FRONTSERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITSBASIC ENGINE
LIFTING GP-ENGINEAIR COMPRESSOR GP
MOUNTING GP-ENGINE
MOUNTING GP-STARTING MOTOR
PAN GP-OIL
PISTON & ROD GP
CYLINDER BLOCK GP
BASIC ENGINE
HOUSING GP-FRONT
#M00726820050
455-1697: KIT-FRONT COVER GASKET
455-1697 KIT-FRONT COVER GASKET
S/N L8R1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER.. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
S/N L8R1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER.. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4R-9999 | [1] | EXCLUDER-CRANKSHAFT SEAL | ||
| 258-5646 | [1] | GASKET | ||
| 275-2164 | [1] | SEAL | ||
| 288-5726 | [1] | SEAL GP-CRANKSHAFT (CLOCKWISE ROTATION) | ||
| 6V-3250 | [1] | SEAL-O-RING | ||
| 6V-5063 | [1] | SEAL-O-RING | ||
| 6V-6609 | [1] | SEAL-O-RING | ||
| 6V-8260 | [1] | SEAL-O-RING | ||
| 061-9455 | [1] | SEAL-O-RING | ||
| 228-4947 | [2] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#M00726820051
450-2544: KIT-REAR COVER GASKET
450-2544 KIT-REAR COVER GASKET
S/N L8R1-UP
KIT CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
S/N L8R1-UP
KIT CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9Y-6089 | [1] | GASKET | |
| 2. | 4H-7869 | [1] | GASKET | |
| 3. | 1P-1669 | [3] | PLUG-SEAL | |
| 4. | 528-5683 | [1] | SEAL GP-CRANKSHAFT (COUNTERCLOCKWISE ROTATION) | |
| 5. | 061-9455 | [1] | SEAL-O-RING | |
| 6. | 214-7567 | [1] | SEAL-O-RING | |
| 7. | 238-5084 | [1] | SEAL-O-RING | |
| FOR A LIST OF RELATED PARTS THAT REQIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#M00726820052
398-2313: LIFTING GP-ENGINE
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS#M00726820053
418-4529: MOUNTING GP-ALTERNATOR & COMPR
418-4529 MOUNTING GP-ALTERNATOR & COMPR
S/N WYE1-UP
PART OF 433-9279 ENGINE AR-COMPLETE
S/N WYE1-UP
PART OF 433-9279 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 243-2310 | [3] | COVER | |
| 2. | 333-1207 | [2] | IDLER AS | |
| 3. | 506-7646 | [1] | BRACKET-SUPPORT | |
| 4. | 347-7963 | [1] | TENSIONER-BELT | |
| 5. | 279-2589 | [1] | PULLEY AS-IDLER (8-GROOVE) | |
| 6. | 6V-3822 M | [3] | BOLT (M10X1.5X35-MM) | |
| 7. | 6V-5230 M | [4] | BOLT (M10X1.5X60-MM) | |
| 8. | 6V-5839 | [7] | WASHER (11X21X2.5-MM THK) | |
| 9. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4178 M | [1] | BOLT (M10X1.5X90-MM) | |
| M | METRIC PART | |||
#M00726820054
365-0232: MOUNTING GP-ENGINE & XMSN
365-0232 MOUNTING GP-ENGINE & XMSN
S/N L8R1-UP
PART OF 392-7176 INSTALLATION AR-ENGINE
S/N L8R1-UP
PART OF 392-7176 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9W-7385 | [4] | SLEEVE | |
| 2. | 8Y-7119 | [4] | WASHER (26X144X12-MM THK) | |
| 3. | 241-3799 | [4] | MOUNT AS | |
| 4. | 365-0290 | [2] | MOUNT AS | |
| 5. | 7X-2563 M | [8] | BOLT (M20X2.5X60-MM) | |
| 6. | 7X-7729 | [10] | WASHER (11X25X3-MM THK) | |
| 7. | 8C-3290 M | [4] | BOLT (M24X3X150-MM) | |
| 8. | 8T-4123 | [8] | WASHER (22X35X3.5-MM THK) | |
| 9. | 8T-4167 | [4] | WASHER-HARD (26X44X4-MM THK) | |
| 10. | 8T-4195 M | [12] | BOLT (M10X1.5X30-MM) | |
| M | METRIC PART | |||
#M00726820055
367-2759: MOUNTING GP-STARTING MOTOR
367-2759 MOUNTING GP-STARTING MOTOR
S/N WYE1-UP
24-VOLT, RH. PROVIDES STARTER WITHOUT GROUNDING HARDWARE
PART OF 433-9279 ENGINE AR-COMPLETE
FOR USE WITH RH STARTER CONFIGURATIONS
CANNOT BE USED WITH LH STARTER CONFIGURATIONS
S/N WYE1-UP
24-VOLT, RH. PROVIDES STARTER WITHOUT GROUNDING HARDWARE
PART OF 433-9279 ENGINE AR-COMPLETE
FOR USE WITH RH STARTER CONFIGURATIONS
CANNOT BE USED WITH LH STARTER CONFIGURATIONS
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS#M00726820056
381-6727: PAN GP-OIL
381-6727 PAN GP-OIL
S/N WYE1-UP
PROVIDES OIL PAN WITHOUT OIL LEVEL SENSOR
PART OF 433-9279 ENGINE AR-COMPLETE
S/N WYE1-UP
PROVIDES OIL PAN WITHOUT OIL LEVEL SENSOR
PART OF 433-9279 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 190-6114 | [1] | GASKET-OIL PAN (ENGINE) | |
| 2. | 367-8000 | [1] | PAN-OIL | |
| 3. | 307-2673 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8005 | [1] | PLUG (3/4-16-THD) | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 4. | 309-5131 | [1] | PLUG AS | |
| 9S-8006 | [1] | PLUG (7/8-14-THD) | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 5. | 329-3706 | [6] | STUD (M8X1.25X42.25-MM, 22.00-MM) | |
| 6. | 346-1581 | [2] | STUD | |
| 7. | 6V-3918 M | [24] | BOLT (M8X1.25X50-MM) | |
| 8. | 9M-1974 | [32] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 4C-9612 B | SEALANT-SILICONE | ||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#M00726820057
300-4170: PISTON & ROD GP
300-4170 PISTON & ROD GP
S/N WYE1-UP
16.5:1 COMBUSTION RATIO
PART OF 434-5135 ENGINE AR-CORE
S/N WYE1-UP
16.5:1 COMBUSTION RATIO
PART OF 434-5135 ENGINE AR-CORE
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 524-5566 | [1] | PIN-PISTON | |
| 2. | 256-9658 | [1] | ROD AS-CONNECTING | |
| 2A. | 160-8197 M | [2] | BOLT (M12X1.25X62-MM) | |
| 3. | 471-0275 | [1] | RING-PISTON (INTERMEDIATE) | |
| 4. | 262-2891 | [1] | RING-PISTON (OIL) | |
| 5. | 269-7290 | [1] | BEARING-CONNECTING ROD | |
| 282-2478 AB | [1] | BEARING-CONNECTING ROD (0.25-MM US) | ||
| 282-2479 AB | [1] | BEARING-CONNECTING ROD (0.51-MM US) | ||
| 6. | 273-2600 | [1] | TUBE AS-OIL JET | |
| 7. | 300-1319 | [1] | RING-PISTON (TOP) | |
| 8. | 396-1539 | [1] | BODY AS-PISTON | |
| 9. | 6V-3940 M | [1] | BOLT (M8X1.25X25-MM) | |
| 10. | 6V-5589 | [2] | RING-RETAINING | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#M00726820058
275-4260: PLUG GP-CYLINDER BLOCK
275-4260 PLUG GP-CYLINDER BLOCK
S/N WYE1-UP
PROVIDES AN O-RING PORT PLUG FOR THE REAR OF THE BLOCK, FOR USE WITH ENGINES NOT USING A JACKET WATER HEATER., SEE 350-5472 FOR JACKET WATER HEATER INSTALLATION LOCATION.
PART OF 433-9279 ENGINE AR-COMPLETE
S/N WYE1-UP
PROVIDES AN O-RING PORT PLUG FOR THE REAR OF THE BLOCK, FOR USE WITH ENGINES NOT USING A JACKET WATER HEATER., SEE 350-5472 FOR JACKET WATER HEATER INSTALLATION LOCATION.
PART OF 433-9279 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS#M00726820059
275-8699: PLUG GP-CYLINDER BLOCK
275-8699 PLUG GP-CYLINDER BLOCK
S/N WYE1-UP
PROVIDES AN O-RING PORT PLUG FOR THE RH SIDE OF BLOCK
PART OF 433-9279 ENGINE AR-COMPLETE
FOR USE WITH ENGINES NOT USING A BYPASS AUXILIARY COOLER
S/N WYE1-UP
PROVIDES AN O-RING PORT PLUG FOR THE RH SIDE OF BLOCK
PART OF 433-9279 ENGINE AR-COMPLETE
FOR USE WITH ENGINES NOT USING A BYPASS AUXILIARY COOLER
For full view, you need register
