421-6864 COOLING GP S/N FEH1-UP PART OF 375-5652 COOLING AR 390F EXCAVATOR

Pos.	Part No	Qty	Parts name
1.	375-5643	[1]	LINER
2.	375-5644	[1]	LINER
3.	375-5662	[1]	PLATE
4.	375-5663	[1]	BRACE AS
5.	375-5664	[2]	SPACER (24X40X33-MM THK)
6.	396-3546	[1]	BRACE AS
7.	396-3550	[1]	PLATE AS
8.	443-2100 Y	[1]	MODULE GP-COOLING
9.	441-5295	[1]	LINER
10.	441-5296	[1]	LINER
11.	441-5301	[1]	LINER
12.	441-6865	[1]	LINER
13.	441-6866	[1]	LINER
14.	441-6867	[1]	LINER
15.	441-6868	[1]	LINER
16.	447-1718 M	[5]	BOLT (M20X2.5X50-MM)
17.	447-1717 M	[1]	BOLT (M20X2.5X45-MM)
18.	447-1720 M	[6]	BOLT (M20X2.5X70-MM)
19.	7X-0515	[8]	WASHER-HARD (17X35X5-MM THK)
20.	453-1259 M	[8]	BOLT (M16X2X40-MM)
21.	453-2847 M	[2]	BOLT (M20X2.5X90-MM)
22.	453-2866	[16]	WASHER-HARD (21.5X45X6-MM THK)
23.	8T-6430 M	[2]	BOLT (M20X2.5X50-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#M00727240161

373-0446: COVER GP-WATER PUMP

COVER GP-WATER PUMP

373-0446 COVER GP-WATER PUMP
S/N RDP1-UP
PART OF 446-1536 LINES GP-WATER

i06688126 M0072724

3730446 COVER GP-WATER PUMP Parts scheme

For full view, you need register

Parts for your 390F EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	201-9701	[1]	SEAL-O-RING
2.	369-7512	[1]	COVER-WATER PUMP

#M00727240162

398-5389: FAN GP-SUCTION

FAN GP-SUCTION

398-5389 FAN GP-SUCTION
S/N FEH1-UP
PART OF 375-5652 COOLING AR

i05819197 M0072724

For full view, you need register

Parts for your 390F EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	295-9439 Y	[2]	DRIVE GP-FAN
3.	360-7709	[4]	GUARD AS-FAN
4.	360-7710	[4]	SHROUD-RADIATOR
5.	363-4151 M	[2]	BRACKET AS
6.	363-4153 M	[2]	PLATE AS
7.	364-0983 Y	[2]	MOTOR GP-PISTON (FAN)
8.	511-7539	[2]	SPIDER AS-FAN (7-BLADE)
9.	415-4555	[1]	SHEET AS
	9M-2307	[5]	WASHER (5.2X19X2-MM THK)
	9M-5732	[5]	RIVET-POP
	415-4558	[1]	SHEET-RUBBER
10.	415-4556	[1]	SHEET AS
	9M-2307	[7]	WASHER (5.2X19X2-MM THK)
	9M-5732	[7]	RIVET-POP
	415-4560	[1]	SHEET-RUBBER
11.	415-4557	[1]	SHEET AS
	9M-2307	[8]	WASHER (5.2X19X2-MM THK)
	9M-5732	[8]	RIVET-POP
	415-4562	[1]	SHEET-RUBBER
12.	4M-0189	[2]	SEAL-O-RING
13.	7X-0515	[8]	WASHER-HARD (17X35X5-MM THK)
14.	8T-2561	[60]	WASHER-HARD (10.5X28.5X5-MM THK)
15.	8T-4136 M	[52]	BOLT (M10X1.5X25-MM)
16.	451-2181 M	[6]	BOLT (M12X1.75X30-MM)
17.	447-1707 M	[8]	BOLT (M16X2X60-MM)
18.	453-3432 M	[12]	BOLT (M8X1.25X20-MM)
19.	453-3449 M	[8]	BOLT (M12X1.75X50-MM)
20.	8T-4195 M	[8]	BOLT (M10X1.5X30-MM)
21.	451-2182	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
22.	453-3451	[12]	WASHER-HARD (8.8X16X2-MM THK)
23.	8T-4910 M	[4]	BOLT (M12X1.75X60-MM)
24.	453-3456	[6]	WASHER-HARD (13.5X25.5X5-MM THK)
25.	312-6458 E		TAPE-REFLECTIVE (8-CM EACH)

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#M00727240163

424-7894: HOUSING & REGULATOR GP

HOUSING & REGULATOR GP

424-7894 HOUSING & REGULATOR GP
S/N RDP1-UP
PART OF 446-1536 LINES GP-WATER

i06688130 M0072724

4247894 HOUSING & REGULATOR GP Parts scheme

For full view, you need register

Parts for your 390F EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	304-8008	[1]	PLUG AS
	6V-9027	[1]	SEAL-O-RING
	9S-8002	[1]	PLUG (7/16-20-THD)
2.	329-1958	[1]	TUBE-WATER
3.	341-1429	[1]	SEAL
4.	248-5513	[2]	REGULATOR-TEMPERATURE (92-DEG C)
5.	377-6219	[1]	MANIFOLD-HOUSING
6.	417-2952	[1]	HOUSING-REGULATOR
7.	0S-1608	[2]	BOLT (3/8-16X3.75-IN)
8.	2N-5243	[2]	SEAL-O-RING
9.	353-5126	[1]	PLUG AS
	6V-6609	[1]	SEAL-O-RING
	9S-8005	[1]	PLUG (3/4-16-THD)
10.	3S-9643	[2]	SEAL-LIP TYPE
11.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)

#M00727240164

492-6527: KIT-OIL COOLER & LINES GASKET

KIT-OIL COOLER & LINES GASKET

492-6527 KIT-OIL COOLER & LINES GASKET
S/N RDP1-UP
OIL COOLER AND LINES GASKET KIT
FOR USE WITH @@@@@484-3459@@@@@, @@@@@516-8919@@@@@

i07317990 M0072724

For full view, you need register

Parts for your 390F EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
125-0434	[1]	SEAL-INTEGRAL
126-4935	[1]	SEAL-INTEGRAL
6V-3250	[3]	SEAL-O-RING
6V-3908	[1]	SEAL-O-RING
6V-5063	[3]	SEAL-O-RING
6V-6609	[2]	SEAL-O-RING
6V-8676	[1]	SEAL-O-RING
8C-5230	[4]	SEAL-O-RING
8T-9588	[1]	SEAL-O-RING
109-0077	[2]	SEAL-O-RING
113-5304	[2]	SEAL-O-RING
118-7214	[2]	SEAL-O-RING
214-7566	[1]	SEAL-O-RING
214-7568	[3]	SEAL-O-RING
238-5081	[1]	SEAL-O-RING
238-5084	[2]	SEAL-O-RING
291-8145	[1]	SEAL-O-RING
416-1498	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#M00727240165

375-5655: LINES GP-COOLING

LINES GP-COOLING

375-5655 LINES GP-COOLING
S/N FEH1-UP
PART OF 375-5652 COOLING AR

i06709626 M0072724

For full view, you need register

Parts for your 390F EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	111-7421	[1]	CAP
2.	127-0929	[1]	CLAMP-V BAND
3.	284-0671	[1]	CLAMP-BAND
4.	335-1184	[1]	ELBOW-AIR
5.	350-6899	[1]	HOSE
6.	365-0582	[1]	VALVE AS-SHUTOFF (COOLANT)
	6V-6609	[1]	SEAL-O-RING
	6V-7238	[1]	VALVE-SHUTOFF
7.	375-5616	[1]	PIPE AS-AFTERCOOLER (HIGH TEMPERATURE)
8.	375-5665	[1]	HOSE (AFTERCOOLER, HIGH TEMPERATURE)
9.	555-8323	[1]	HOSE (AFTERCOOLER, LOW TEMPERATURE)
10.	399-7535	[1]	HOSE (AFTERCOOLER, LOW TEMPERATURE)
11.	417-2245	[1]	PIPE AS-AFTERCOOLER (HIGH TEMPERATURE)
12.	425-3755	[1]	PIPE AS-AFTERCOOLER (LOW TEMPERATURE)
13.	425-4805	[1]	PIPE AS-AFTERCOOLER (HIGH TEMPERATURE)
14.	520-4649	[1]	HOSE (AFTERCOOLER, HIGH TEMPERATURE)
15.	451-0409	[1]	ELBOW AS
	6V-6609	[1]	SEAL-O-RING
	8T-0119	[1]	ELBOW
16.	526-3563	[4]	CLIP
17.	495-0619	[1]	HOSE-RADIATOR (UPPER)
18.	495-0620	[1]	HOSE-RADIATOR (LOWER)
19.	495-0621	[4]	HOSE-RADIATOR (CENTER)
20.	495-0622	[1]	PIPE AS
21.	495-0623	[1]	SUPPORT AS
22.	495-0624	[1]	PIPE AS
23.	495-0625	[1]	SUPPORT AS
24.	120-5867	[1]	CLIP
25.	135-8575	[2]	BOLT AS
26.	144-0367	[12]	CLAMP-HOSE
27.	5D-1026	[1]	CLAMP-BAND
28.	5M-6214	[1]	PLUG (1/8-27 PTF)
29.	7X-7729	[9]	WASHER (11X25X3-MM THK)
30.	8C-3089	[1]	SEAL-O-RING
31.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
32.	8T-4136 M	[10]	BOLT (M10X1.5X25-MM)
33.	8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
34.	8T-4986	[8]	CLAMP-HOSE
35.	9X-2201	[12]	CLAMP-HOSE
36.	5P-0767 E		HOSE (9-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#M00727240166

384-6824: LINES GP-TURBOCHARGER WATER

LINES GP-TURBOCHARGER WATER

384-6824 LINES GP-TURBOCHARGER WATER
S/N RDP1-UP
PROVIDES TURBO WATER LINES WITH HORIZONTAL TEE FITTING. PROVIDES WATER SUPPLY AND DRAIN LINES TO TURBO
PART OF 484-3459, 516-8919, 547-8683 ENGINE AR-COMPLETE
FOR USE WITH GT45 REAR EXHAUST CONFIGURATION

i06687055 M0072724

3846824 LINES GP-TURBOCHARGER WATER Parts scheme

For full view, you need register

Parts for your 390F EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	459-5116	[1]	HOSE & TUBE AS
2.	357-9304	[1]	BRACKET AS
	1F-0750	[1]	NUT-WELD (3/8-16-THD)
3.	421-6189	[1]	CONNECTOR AS
	6V-6609	[1]	SEAL-O-RING
	9X-2304	[1]	CONNECTOR
	180-8424	[1]	SEAL-O-RING
4.	415-9374	[1]	HOSE & TUBE AS
5.	353-5114	[1]	TEE AS
	180-8424	[1]	SEAL-O-RING
	353-5113	[1]	ADAPTER-TEE
6.	366-4693	[2]	ADAPTER AS
			(EACH INCLUDES)
	6V-6609	[1]	SEAL-O-RING
	030-8110	[1]	CONNECTOR
7.	0S-0509	[4]	BOLT (3/8-16X0.75-IN)
8.	0S-1594	[1]	BOLT (3/8-16X1-IN)
9.	132-7551	[1]	SPACER (11X19X6-MM THK)
10.	349-1209	[1]	CLIP
11.	351-0279	[1]	ADAPTER AS
	5P-6944	[1]	ADAPTER
	6V-6609	[1]	SEAL-O-RING
12.	4K-6297	[1]	ELBOW
13.	5D-6523	[1]	CLIP
14.	5M-2894	[5]	WASHER-HARD (10.2X18.5X2.5-MM THK)
15.	6V-3250	[1]	SEAL-O-RING
16.	9S-8752	[1]	NUT-FULL (3/8-16-THD)
17.	389-3719	[1]	ELBOW AS
	6V-3250	[1]	SEAL-O-RING
	090-5725	[1]	ELBOW
18.	8M-0547	[1]	ELBOW-FLARED (SWIVEL)
19.	2H-0435	[2]	CLAMP

#M00727240167

444-5850: LINES GP-WATER

LINES GP-WATER

444-5850 LINES GP-WATER
S/N RDP1-UP
NRS COOLER
PART OF 484-3459 ENGINE AR-COMPLETE

i06687059 M0072724

For full view, you need register

Parts for your 390F EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-9588	[1]	SEAL-O-RING
2.	338-1556	[2]	RETAINER
3.	344-1816	[1]	ELBOW
4.	349-8402	[1]	TUBE
5.	355-9558	[1]	ELBOW
6.	361-1285	[1]	ELBOW
7.	445-6881	[1]	HOSE
8.	444-3516	[1]	TUBE
9.	444-3517	[1]	TUBE AS
10.	442-7347	[1]	ELBOW
11.	174-4883	[1]	STUD (3/8-16X2-IN)
12.	0S-0509	[2]	BOLT (3/8-16X0.75-IN)
13.	118-7214	[2]	SEAL-O-RING
14.	1B-9575	[2]	BOLT (5/16-18X1.56-IN)
15.	1H-5514	[2]	BOLT (5/16-18X1.625-IN)
16.	523-4273	[2]	CLAMP-BAND
17.	304-8008	[1]	PLUG AS
	6V-9027	[1]	SEAL-O-RING
	9S-8002	[1]	PLUG (7/16-20-THD)
18.	4B-3388	[1]	BOLT (5/16-18X1.125-IN)
19.	4F-7391	[1]	SEAL-O-RING
20.	4F-7957	[2]	BOLT (1/4-20X0.875-IN)
21.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
22.	5P-0537	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
23.	7L-6580	[2]	SEAL-O-RING
24.	8S-0023	[2]	CLIP (SLOT)
25.	8S-0024	[2]	CLIP (TAB)
26.	9M-1974	[4]	WASHER-HARD (8.8X16X2-MM THK)
27.	9N-0869	[2]	WASHER-HARD (8.8X25.5X2-MM THK)
28.	9X-6458	[1]	WASHER-HARD (10.2X22.5X3-MM THK)
29.	206-6876	[1]	CAP-TUBE
30.	0S-1615	[2]	BOLT (1/4-20X0.75-IN)

#M00727240168

446-1536: LINES GP-WATER

LINES GP-WATER

446-1536 LINES GP-WATER
S/N RDP1-UP
PART OF 484-3459, 516-8919, 547-8683 ENGINE AR-COMPLETE
CANNOT BE USED WITH CU-NI CORE OIL COOLER, STD FLOW WATER PUMP, ON-ENGINE MOUNTED TRANS COOLER

i06687062 M0072724

For full view, you need register

Parts for your 390F EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	126-4935	[1]	SEAL-INTEGRAL
2.	341-4966 Y	[1]	BONNET GP-OIL COOLER
3.	353-5140	[1]	PLUG AS
3A.	6V-5063	[1]	SEAL-O-RING
3B.	9S-8008	[1]	PLUG (1-1/16-12-THD)
4.	373-0445 Y	[1]	COOLER GP-ENGINE OIL
5.	373-0446 Y	[1]	COVER GP-WATER PUMP
6.	424-7894 Y	[1]	HOUSING & REGULATOR GP
7.	0S-1588	[4]	BOLT (3/8-16X1.25-IN)
8.	125-0434	[1]	SEAL-INTEGRAL
9.	167-4407	[1]	SEAL-O-RING
10.	1A-2029	[6]	BOLT (3/8-16X1.125-IN)
11.	353-5124	[1]	PLUG AS
11A.	6V-3250	[1]	SEAL-O-RING
11B.	9S-8004	[1]	PLUG (9/16-18-THD)
12.	5M-2894	[13]	WASHER-HARD (10.2X18.5X2.5-MM THK)
13.	9F-8999	[3]	BOLT (3/8-16X7-IN)
	Y		SEPARATE ILLUSTRATION

#M00727240169

480-7638: LINES GP-WATER

LINES GP-WATER

480-7638 LINES GP-WATER
S/N RDP1-UP
PART OF 484-3459, 516-8919, 547-8683 ENGINE AR-COMPLETE

i06839269 M0072724

For full view, you need register

Parts for your 390F EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-9588	[1]	SEAL-O-RING
2.	338-1556	[2]	RETAINER
3.	344-1816	[1]	ELBOW
4.	349-8402	[1]	TUBE
5.	355-9558	[1]	ELBOW
6.	388-8922	[1]	ELBOW
7.	445-6881	[1]	HOSE
8.	523-4273	[2]	CLAMP-BAND
9.	493-0357	[1]	TUBE AS
10.	493-0358	[1]	TUBE AS
11.	0S-0509	[2]	BOLT (3/8-16X0.75-IN)
12.	0S-1594	[1]	BOLT (3/8-16X1-IN)
13.	118-7214	[2]	SEAL-O-RING
14.	1B-9575	[2]	BOLT (5/16-18X1.56-IN)
15.	1H-5514	[2]	BOLT (5/16-18X1.625-IN)
16.	2B-2695	[1]	BOLT (5/16-18X0.875-IN)
17.	3E-4352	[1]	WASHER-HARD (8.8X20.5X2.5-MM THK)
18.	4F-7957	[2]	BOLT (1/4-20X0.875-IN)
19.	5M-2894	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
20.	5P-0537	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
21.	7L-6580	[2]	SEAL-O-RING
22.	8S-0023	[2]	CLIP (SLOT)
23.	8S-0024	[2]	CLIP (TAB)
24.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
25.	9X-6458	[1]	WASHER-HARD (10.2X22.5X3-MM THK)
26.	493-1489	[1]	BRACKET AS
	4K-9097	[1]	NUT-WELD (5/16-18-THD)