HYDRAULIC SYSTEM
VALVE GP-CONTROLSWIVEL GP
TANK GP
HYDRAULIC SYSTEM
VALVE GP-CONTROL
#M00727240770
416-5348: SPOOL GP-CONTROL VALVE
416-5348 SPOOL GP-CONTROL VALVE
S/N FEH1-UP
PART OF 346-1500, 346-7610 VALVE GP-CONTROL
S/N FEH1-UP
PART OF 346-1500, 346-7610 VALVE GP-CONTROL
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 304-5114 | [1] | SLEEVE | |
| 2. | 317-5154 | [1] | RING-BACKUP | |
| 3. | 346-1626 | [1] | SPRING | |
| 4. | 346-1628 | [1] | RETAINER | |
| 5. | 346-7576 | [1] | WASHER | |
| 6. | [1] | KIT-SEAL | ||
| 7. | 3J-7354 | [1] | SEAL-O-RING | |
| 8. | 4J-0523 | [1] | SEAL-O-RING | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
#M00727240771
416-5349: SPOOL GP-CONTROL VALVE
416-5349 SPOOL GP-CONTROL VALVE
S/N FEH1-UP
PART OF 346-1500, 346-7610 VALVE GP-CONTROL
S/N FEH1-UP
PART OF 346-1500, 346-7610 VALVE GP-CONTROL
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 304-5114 | [1] | SLEEVE | |
| 2. | 317-5154 | [1] | RING-BACKUP | |
| 3. | 346-1626 | [1] | SPRING | |
| 4. | 346-1628 | [1] | RETAINER | |
| 5. | 346-7576 | [1] | WASHER | |
| 6. | [1] | KIT-SEAL | ||
| 7. | 3J-7354 | [1] | SEAL-O-RING | |
| 8. | 4J-0523 | [1] | SEAL-O-RING | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
#M00727240772
416-5350: SPOOL GP-CONTROL VALVE
416-5350 SPOOL GP-CONTROL VALVE
S/N FEH1-UP
PART OF 346-1500, 346-7610 VALVE GP-CONTROL
S/N FEH1-UP
PART OF 346-1500, 346-7610 VALVE GP-CONTROL
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 304-5114 | [1] | SLEEVE | |
| 2. | 317-5154 | [1] | RING-BACKUP | |
| 3. | 346-1626 | [1] | SPRING | |
| 4. | 346-1628 | [1] | RETAINER | |
| 5. | 346-7576 | [1] | WASHER | |
| 6. | [1] | KIT-SEAL | ||
| 7. | 3J-7354 | [1] | SEAL-O-RING | |
| 8. | 4J-0523 | [1] | SEAL-O-RING | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
#M00727240773
416-5351: SPOOL GP-CONTROL VALVE
416-5351 SPOOL GP-CONTROL VALVE
S/N FEH1-UP
PART OF 346-7570, 346-7580 VALVE GP-CONTROL
S/N FEH1-UP
PART OF 346-7570, 346-7580 VALVE GP-CONTROL
For full view, you need register
#M00727240774
416-5352: SPOOL GP-CONTROL VALVE
416-5352 SPOOL GP-CONTROL VALVE
S/N FEH1-UP
PART OF 346-7570, 346-7580 VALVE GP-CONTROL
S/N FEH1-UP
PART OF 346-7570, 346-7580 VALVE GP-CONTROL
For full view, you need register
#M00727240775
416-5359: SPOOL GP-CONTROL VALVE
For full view, you need register
#M00727240776
349-4075: SWIVEL & MOUNTING GP
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 295-9595 Y | [1] | SWIVEL GP | |
| 2. | 295-9609 | [1] | SUPPORT AS | |
| 3. | 295-9626 | [1] | PLATE | |
| 4. | 7X-2552 M | [5] | BOLT (M16X2X30-MM) | |
| 5. | 8T-0706 | [2] | RING-RETAINING | |
| 6. | 8T-4184 M | [2] | BOLT (M12X1.75X45-MM) | |
| 7. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 8. | 9X-8257 | [5] | WASHER (17.5X30X3.5-MM THK) | |
| 1U-8846 BF | SEALANT-GASKET | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00727240777
295-9595: SWIVEL GP
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7Y-4837 | [1] | COVER | |
| 2. | 7Y-4843 | [1] | RETAINER | |
| 3. | 156-0619 | [5] | SEAL | |
| 4. | 295-9606 | [1] | HOUSING | |
| 5. | 295-9607 | [1] | ROTOR | |
| 6. | 095-1633 | [3] | SEAL-O-RING | |
| 7. | 095-1728 | [1] | SEAL-O-RING | |
| 8. | 455-3798 M | [9] | BOLT (M10X1.5X25-MM) | |
| 9. | 8T-6759 | [1] | PLUG-PIPE | |
| 10. | 148-8407 | [1] | PLUG AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 9S-4191 | [1] | PLUG (9/16-18-THD) | ||
| M | METRIC PART | |||
#M00727240778
493-8538: TANK & FILTER GP-HYDRAULIC
493-8538 TANK & FILTER GP-HYDRAULIC
S/N FEH1-UP
PART OF 382-7058 TANK GP-HYDRAULIC
S/N FEH1-UP
PART OF 382-7058 TANK GP-HYDRAULIC
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-2827 | [1] | GUIDE-VALVE | |
| 2. | 6E-5534 Y | [2] | FILTER GP-OIL (HYDRAULIC) | |
| 3. | 8J-8782 | [1] | BODY-DRAIN VALVE | |
| 4. | 8J-8783 | [1] | VALVE-DRAIN (HYDRAULIC TANK) | |
| 5. | 9J-7031 | [1] | PLUG-DRAIN | |
| 6. | 188-4145 Y | [2] | FILTER GP-OIL (HYDRAULIC RETURN) | |
| 7. | 227-0592 | [1] | COVER AS | |
| 8. | 256-6453 | [1] | SENSOR-TEMPERATURE (2-PIN)(HYDRAULIC TANK OIL) | |
| 9. | 315-4441 | [1] | SWITCH AS-PRESSURE (HYDRAULIC OIL) | |
| 10. | 333-4583 | [2] | PIPE | |
| 11. | 347-6081 Y | [1] | GAUGE GP-SIGHT (HYDRAULIC OIL LEVEL) | |
| 12. | 359-8385 | [1] | FLANGE AS | |
| 175-6176 | [1] | SEAL-O-RING | ||
| 13. | 363-2518 Y | [1] | BREATHER GP (HYDRAULIC TANK) | |
| 14. | 363-2570 | [1] | PIPE AS | |
| 15. | 364-1012 Y | [1] | SCREEN GP-HYDRAULIC | |
| 16. | 493-8540 Y | [1] | TANK GP-HYDRAULIC | |
| 17. | 095-1735 | [1] | SEAL-O-RING | |
| 18. | 170-8553 M | [4] | BOLT-SOCKET HEAD (M12X1.75X40-MM) | |
| 19. | 1H-8278 | [2] | SEAL-O-RING | |
| 20. | 2H-3934 | [1] | SEAL-O-RING | |
| 21. | 3K-0360 | [1] | SEAL-O-RING | |
| 22. | 4J-0524 | [2] | SEAL-O-RING | |
| 23. | 4J-0527 | [1] | SEAL-O-RING | |
| 24. | 5C-9553 M | [3] | BOLT (M6X1X16-MM) | |
| 25. | 5M-2057 | [1] | SEAL-O-RING | |
| 26. | 7B-3039 | [1] | SPRING | |
| 27. | 8J-1665 | [1] | SEAL-O-RING | |
| 28. | 8T-0267 M | [2] | BOLT-SOCKET HEAD (M6X1X12-MM) | |
| 29. | 8T-3298 | [1] | SEAL-RECTANGULAR | |
| 30. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 31. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 32. | 8T-4194 M | [16] | BOLT (M12X1.75X50-MM) | |
| 33. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 34. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 35. | 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 36. | 8T-7547 M | [8] | BOLT (M8X1.25X30-MM) | |
| 37. | 9X-8256 | [3] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00727240779
382-7057: TANK & MTG GP-HYDRAULIC
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9S-8178 | [6] | SPACER (0.891X1.625X1.5-IN THK) | |
| 2. | 087-8906 B | [6] | SHIM (2-MM THK) | |
| 3. | 087-8907 B | [6] | SHIM (1-MM THK) | |
| 4. | 087-8909 B | [6] | SHIM (0.4-MM THK) | |
| 5. | 382-7058 Y | [1] | TANK GP-HYDRAULIC | |
| 6. | 447-1716 M | [6] | BOLT (M20X2.5X80-MM) | |
| 7. | 135-8579 | [6] | BOLT AS | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
HYDRAULIC SYSTEM
VALVE GP-CONTROL
Operation and Maintenance Manual
Special Instruction
Installation Procedure for the <NOBR>458-7612</NOBR> Auxiliary Hydraulic Control Ar on Certain 390F Hydraulic Excavators {1408, 5051, 5057, 7405, 7557}
Installation Procedure for the458-7612 Auxiliary Hydraulic Control Ar on Certain 390F Hydraulic Excavators {1408, 5051, 5057, 7405, 7557}
Installation Procedure for the
Adaptive Control System (ACS) Advanced Calibration Procedures {5051, 5063}
Adaptive Control System (ACS) Advanced Calibration Procedures {5051, 5063}
Adaptive Control System (ACS) Advanced Calibration Procedures {5051, 5063}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LOAD HOLD CHECK VALVE COVER FIXING BOLTS AND WASHERS ON CERTAIN 349F, 352F, 374F, AND 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LOAD HOLD CHECK VALVE COVER FIXING BOLTS AND WASHERS ON CERTAIN 349F, 352F, 374F, AND 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LOAD HOLD CHECK VALVE COVER FIXING BOLTS AND WASHERS ON CERTAIN 349F, 352F, 374F, AND 390F EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LOAD HOLD CHECK VALVE COVER FIXING BOLTS AND WASHERS ON CERTAIN 349F, 352F, 374F, AND 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LOAD HOLD CHECK VALVE COVER FIXING BOLTS AND WASHERS ON CERTAIN 349F, 352F, 374F, AND 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LOAD HOLD CHECK VALVE COVER FIXING BOLTS AND WASHERS ON CERTAIN 349F, 352F, 374F, AND 390F EXCAVATORS
Service Letter-Asia
Systems Operation
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LOAD HOLD CHECK VALVE COVER FIXING BOLTS AND WASHERS ON CERTAIN 349F, 352F, 374F, AND 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LOAD HOLD CHECK VALVE COVER FIXING BOLTS AND WASHERS ON CERTAIN 349F, 352F, 374F, AND 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LOAD HOLD CHECK VALVE COVER FIXING BOLTS AND WASHERS ON CERTAIN 349F, 352F, 374F, AND 390F EXCAVATORS
Testing and Adjusting
Troubleshooting
IMV Controllability Troubleshooting
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
IMV Calibration - Functional Test
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
Bypass Valve (ACS Valve) - Functional Test
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
Drift Reduction Valve - Functional Test
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
Flow Combiner Valve - Functional Test
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
Hydraulic System Warm-Up - Functional Test
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
Manual Hydraulic Valve - Health Check
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
Disassembly and Assembly
Service Magazine
Improved Machining Process for the Control Valve Spool Group Is Now Used on Certain Excavators, Material Handlers, Mobile Hydraulic Power Units and Work Tools {5051, 5464}
Improved Machining Process for the Control Valve Spool Group Is Now Used on Certain Excavators, Material Handlers, Mobile Hydraulic Power Units and Work Tools {5051, 5464}
Improved Machining Process for the Control Valve Spool Group Is Now Used on Certain Excavators, Material Handlers, Mobile Hydraulic Power Units and Work Tools {5051, 5464}
Improved Machining Process for the Straight Travel Control Valve Spool Group Is Now Used on Certain Excavators, Material Handlers, and Mobile Hydraulic Power Units {5051, 5464}
Improved Machining Process for the Straight Travel Control Valve Spool Group Is Now Used on Certain Excavators, Material Handlers, and Mobile Hydraulic Power Units {5051, 5464}
Improved Machining Process for the Straight Travel Control Valve Spool Group Is Now Used on Certain Excavators, Material Handlers, and Mobile Hydraulic Power Units {5051, 5464}
Improved Adaptive Control System (ACS) Valve Is Now Used on Certain Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {5051}
Improved Adaptive Control System (ACS) Valve Is Now Used on Certain Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {5051}
Improved Adaptive Control System (ACS) Valve Is Now Used on Certain Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {5051}
