POWER TRAIN
AXLE GPPOWER TRAIN AR
POWER TRAIN
AXLE GP
#M00739280250
241-7436: AXLE & MTG AR-REAR
241-7436 AXLE & MTG AR-REAR
S/N FB81-UP
PART OF 433-6275 POWER TRAIN AR
AN ATTACHMENT
S/N FB81-UP
PART OF 433-6275 POWER TRAIN AR
AN ATTACHMENT
For full view, you need register
Parts for your M318F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5W-0965 | [20] | RING | |
| 2. | 8T-4123 | [16] | WASHER (22X35X3.5-MM THK) | |
| 3. | 8U-5923 | [2] | FITTING AS | |
| 4. | 303-9446 | [20] | LOCKWASHER | |
| 5. | 5W-1386 M | [20] | NUT (M22X1.5-THD) | |
| 6. | 237-4525 Y | [1] | AXLE & TRANSMISSION AR | |
| 7. | 241-6199 | [1] | ELBOW AS | |
| 6V-8398 | [1] | SEAL-O-RING | ||
| 8T-6850 | [1] | SEAL-O-RING | ||
| 241-6192 | [1] | ELBOW | ||
| 8. | 4I-6766 M | [8] | BOLT (M20X2.5X230-MM) | |
| 9. | 6V-6560 | [2] | SEAL-O-RING | |
| 10. | 188-2720 M | [8] | LOCKNUT (M20X2.5-THD) | |
| 11. | 6V-8398 | [3] | SEAL-O-RING | |
| 12. | 8T-6850 | [1] | SEAL-O-RING | |
| 13. | 8T-7488 | [1] | CONNECTOR | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00739280251
237-4525: AXLE & TRANSMISSION AR
237-4525 AXLE & TRANSMISSION AR
S/N FB81-UP
PART OF 241-7436 AXLE & MTG AR-REAR
AN ATTACHMENT
S/N FB81-UP
PART OF 241-7436 AXLE & MTG AR-REAR
AN ATTACHMENT
For full view, you need register
Parts for your M318F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 237-4526 Y | [1] | TRANSMISSION GP (DIRECT DRIVE) | |
| 2. | 233-8734 | [2] | HOUSING-AXLE | |
| 3. | 233-8737 | [2] | SHAFT-AXLE | |
| 4. | 233-8738 | [1] | HOUSING | |
| 5. | 054-6514 B | [2] | SHIM (0.1-MM THK) | |
| 121-7679 B | [2] | SHIM (0.15-MM THK) | ||
| 054-6513 B | [2] | SHIM (0.2-MM THK) | ||
| 121-7680 B | [2] | SHIM (0.25-MM THK) | ||
| 054-6512 B | [2] | SHIM (0.3-MM THK) | ||
| 128-7675 B | [2] | SHIM (0.35-MM THK) | ||
| 7T-0564 B | [2] | SHIM (0.4-MM THK) | ||
| 121-7677 B | [2] | SHIM (0.45-MM THK) | ||
| 7T-0563 B | [2] | SHIM (0.5-MM THK) | ||
| 121-7678 B | [2] | SHIM (0.55-MM THK) | ||
| 7T-0562 B | [2] | SHIM (0.6-MM THK) | ||
| 128-7676 B | [2] | SHIM (0.65-MM THK) | ||
| 128-7677 B | [2] | SHIM (0.7-MM THK) | ||
| 128-7680 B | [2] | SHIM (0.75-MM THK) | ||
| 7T-0561 B | [2] | SHIM (0.8-MM THK) | ||
| 128-7681 B | [2] | SHIM (0.85-MM THK) | ||
| 128-7683 B | [2] | SHIM (0.9-MM THK) | ||
| 128-7684 B | [2] | SHIM (0.95-MM THK) | ||
| 7T-0560 B | [2] | SHIM (1-MM THK) | ||
| 128-7685 B | [2] | SHIM (1.05-MM THK) | ||
| 128-7686 B | [2] | SHIM (1.1-MM THK) | ||
| 128-7687 B | [2] | SHIM (1.15-MM THK) | ||
| 128-7688 B | [2] | SHIM (1.25-MM THK) | ||
| 128-7689 B | [2] | SHIM (1.3-MM THK) | ||
| 128-7690 B | [2] | SHIM (1.35-MM THK) | ||
| 7T-0558 B | [2] | SHIM (1.4-MM THK) | ||
| 128-7691 B | [2] | SHIM (1.45-MM THK) | ||
| 128-7692 B | [2] | SHIM (1.5-MM THK) | ||
| 128-7693 B | [2] | SHIM (1.55-MM THK) | ||
| 128-7694 B | [2] | SHIM (1.6-MM THK) | ||
| 128-7695 B | [2] | SHIM (1.65-MM THK) | ||
| 7T-0552 B | [2] | SHIM (2-MM THK) | ||
| 202-8137 B | [2] | SHIM (1.47-MM THK) | ||
| 202-8138 B | [2] | SHIM (1.63-MM THK) | ||
| 202-8139 B | [2] | SHIM (1.75-MM THK) | ||
| 202-8140 B | [2] | SHIM (1.7-MM THK) | ||
| 202-8141 B | [2] | SHIM (1.8-MM THK) | ||
| 202-8142 B | [2] | SHIM (1.85-MM THK) | ||
| 202-8143 B | [2] | SHIM (1.9-MM THK) | ||
| 202-8144 B | [2] | SHIM (1.95-MM THK) | ||
| 45. | 9R-7003 | [1] | BEARING-TAPERED ROLLER | |
| 46. | 6Y-2942 | [1] | BEARING-TAPERED ROLLER | |
| 47. | 6Y-2943 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 48. | 8U-6079 | [2] | SEAL-O-RING | |
| 49. | 238-4666 M | [32] | BOLT (M18X2.5X65-MM) | |
| 50. | 5W-5531 | [32] | WASHER (19X30X3-MM THK) | |
| 51. | 263-3629 | [3] | PLUG AS | |
| 52. | 203-0215 | [4] | SEAL-O-RING | |
| 53. | 263-3630 | [1] | PLUG AS-MAGNET (RIGHT AXLE HOUSING) | |
| 54. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 55. | 9X-0690 | [10] | NUT | |
| 56. | 233-8728 | [1] | GEAR-CROWN | |
| 57. | 9R-6991 | [1] | CASE-DIFFERENTIAL | |
| 58. | 9R-6964 | [2] | GEAR-DIFFERENTIAL | |
| 59. | 6T-5749 | [2] | WASHER-THRUST | |
| 60. | 128-7855 | [4] | GEAR-PINION | |
| 61. | 9R-6994 | [4] | WASHER-THRUST | |
| 62. | 119-9288 | [2] | SHAFT | |
| 63. | 9R-6818 M | [12] | BOLT (M12X1.5X125-MM) | |
| 64. | 9R-6819 | [12] | WASHER (13X21.9X3-MM THK) | |
| 65. | 8T-2450 | [4] | PIN-SPRING | |
| 66. | 9R-6962 | [4] | PIN-CLAMPING | |
| 67. | 233-8739 | [2] | HUB GP-WHEEL | |
| (EACH INCLUDES) | ||||
| 243-0378 | [1] | NUT | ||
| 68. | 8T-0088 M | [28] | BOLT (M16X2X65-MM) | |
| 69. | 8D-5054 | [28] | WASHER-HARD (17X30X3-MM THK) | |
| 70. | 8U-5927 | [2] | SEAL-O-RING | |
| 71. | 233-8742 | [2] | GEAR-SUN | |
| 72. | 5W-5682 | [2] | VALVE AS-PURGE (AXLE) | |
| 74. | 263-4057 | [8] | DOWEL | |
| 75. | 203-5417 | [2] | SEAL-LIP TYPE | |
| 76. | 121-8167 | [4] | BEARING-ROLLER | |
| 77. | 238-3298 | [2] | SLEEVE-SPACER | |
| 78. | 263-3700 | [2] | HUB | |
| 79. | 110-4745 | [2] | SEAL-O-RING | |
| 80. | 263-3701 | [2] | GEAR-CARRIER | |
| 81. | 8U-2359 | [4] | SEAL-O-RING | |
| 82. | 8U-2058 | [2] | SEAL-O-RING | |
| 83. | 298-2314 C | [2] | GEAR-INTERNAL | |
| 84. | 263-3703 | [2] | PISTON | |
| 85. | 8U-2373 | [2] | SEAL | |
| 86. | 238-3303 | [2] | RING (2-MM THK) | |
| 87. | 8U-0754 | [2] | SEAL | |
| 88. | 238-3304 | [2] | RING (2-MM THK) | |
| 89. | 8U-3592 | [16] | SPRING | |
| 90. | 238-3305 | [16] | SPRING | |
| 91. | 298-2315 C | [16] | BOLT-SPECIAL | |
| 92. | 8U-3591 | [16] | SPACER (6.5X15X7-MM THK) | |
| 93. | 263-3704 | [12] | DISC-CLUTCH (4.5-MM THK) | |
| 94. | 238-3307 B | [12] | DISC-CLUTCH (2-MM THK) | |
| 238-3308 B | [12] | DISC-CLUTCH (3-MM THK) | ||
| 238-3309 B | [12] | DISC-CLUTCH (2.5-MM THK) | ||
| 97. | 110-0165 B | [2] | WASHER-THRUST (1.5-MM THK) | |
| 110-0164 B | [2] | WASHER-THRUST (1.7-MM THK) | ||
| 110-0163 B | [2] | WASHER-THRUST (2-MM THK) | ||
| 110-0162 B | [2] | WASHER-THRUST (2.2-MM THK) | ||
| 110-0161 B | [2] | WASHER-THRUST (2.5-MM THK) | ||
| 110-0160 B | [2] | WASHER-THRUST (2.7-MM THK) | ||
| 110-0159 B | [2] | WASHER-THRUST (3-MM THK) | ||
| 104. | 238-3310 | [2] | HOUSING | |
| 105. | 238-3311 | [6] | GEAR-PLANETARY | |
| 106. | 213-9783 | [6] | BEARING-ROLLER | |
| 107. | 190-8590 | [12] | RING-SNAP | |
| 108. | 190-8591 | [12] | WASHER (64.5X72.1X2-MM THK) | |
| 109. | 110-4737 | [6] | RING-RETAINING | |
| 110. | 5W-2177 M | [4] | BOLT-SOCKET HEAD (M12X1.75X20-MM) | |
| 111. | 9R-3168 M | [2] | SCREW (M10X1.5X20-MM) | |
| 112. | 238-3312 | [20] | STUD-WHEEL | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00739280252
331-1400: AXLE & TRANSMISSION AR
331-1400 AXLE & TRANSMISSION AR
S/N FB81-UP
PART OF 394-5010 AXLE AR-REAR
Type 1
AN ATTACHMENT
S/N FB81-UP
PART OF 394-5010 AXLE AR-REAR
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your M318F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 416-1916 CY | [1] | TRANSMISSION GP (DIRECT DRIVE) | |
| 2. | 333-8043 | [2] | HOUSING-AXLE | |
| 3. | 333-8044 | [2] | SHAFT-AXLE | |
| 4. | 233-8738 | [1] | HOUSING | |
| 5. | 054-6514 B | [2] | SHIM (0.1-MM THK) | |
| 121-7679 B | [2] | SHIM (0.15-MM THK) | ||
| 054-6513 B | [2] | SHIM (0.2-MM THK) | ||
| 121-7680 B | [2] | SHIM (0.25-MM THK) | ||
| 054-6512 B | [2] | SHIM (0.3-MM THK) | ||
| 128-7675 B | [2] | SHIM (0.35-MM THK) | ||
| 7T-0564 B | [2] | SHIM (0.4-MM THK) | ||
| 121-7677 B | [2] | SHIM (0.45-MM THK) | ||
| 7T-0563 B | [2] | SHIM (0.5-MM THK) | ||
| 121-7678 B | [2] | SHIM (0.55-MM THK) | ||
| 7T-0562 B | [2] | SHIM (0.6-MM THK) | ||
| 128-7676 B | [2] | SHIM (0.65-MM THK) | ||
| 128-7677 B | [2] | SHIM (0.7-MM THK) | ||
| 128-7680 B | [2] | SHIM (0.75-MM THK) | ||
| 7T-0561 B | [2] | SHIM (0.8-MM THK) | ||
| 128-7681 B | [2] | SHIM (0.85-MM THK) | ||
| 128-7683 B | [2] | SHIM (0.9-MM THK) | ||
| 128-7684 B | [2] | SHIM (0.95-MM THK) | ||
| 7T-0560 B | [2] | SHIM (1-MM THK) | ||
| 128-7685 B | [2] | SHIM (1.05-MM THK) | ||
| 128-7686 B | [2] | SHIM (1.1-MM THK) | ||
| 128-7687 B | [2] | SHIM (1.15-MM THK) | ||
| 128-7688 B | [2] | SHIM (1.25-MM THK) | ||
| 128-7689 B | [2] | SHIM (1.3-MM THK) | ||
| 128-7690 B | [2] | SHIM (1.35-MM THK) | ||
| 7T-0558 B | [2] | SHIM (1.4-MM THK) | ||
| 128-7691 B | [2] | SHIM (1.45-MM THK) | ||
| 202-8137 B | [2] | SHIM (1.47-MM THK) | ||
| 128-7692 B | [2] | SHIM (1.5-MM THK) | ||
| 128-7693 B | [2] | SHIM (1.55-MM THK) | ||
| 128-7694 B | [2] | SHIM (1.6-MM THK) | ||
| 202-8138 B | [2] | SHIM (1.63-MM THK) | ||
| 128-7695 B | [2] | SHIM (1.65-MM THK) | ||
| 202-8139 B | [2] | SHIM (1.75-MM THK) | ||
| 202-8140 B | [2] | SHIM (1.7-MM THK) | ||
| 202-8141 B | [2] | SHIM (1.8-MM THK) | ||
| 202-8142 B | [2] | SHIM (1.85-MM THK) | ||
| 202-8143 B | [2] | SHIM (1.9-MM THK) | ||
| 202-8144 B | [2] | SHIM (1.95-MM THK) | ||
| 7T-0552 B | [2] | SHIM (2-MM THK) | ||
| 45. | 6Y-2942 | [2] | BEARING-TAPERED ROLLER | |
| 46. | 6Y-2943 | [2] | CUP-BEARING (TAPERED ROLLER) | |
| 47. | 8U-6079 | [2] | SEAL-O-RING | |
| 48. | 5W-5627 M | [32] | BOLT (M18X2.5X60-MM) | |
| 49. | 263-3629 | [3] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 203-0215 | [1] | SEAL-O-RING | ||
| 50. | 203-0215 | [1] | SEAL-O-RING | |
| 51. | 263-3630 | [1] | PLUG AS-MAGNET (AXLE HOUSING) | |
| 52. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 53. | 6V-8149 M | [10] | NUT (M12X1.75-THD) | |
| 54. | 372-4119 | [1] | GEAR-CROWN | |
| 55. | 371-7328 | [1] | CASE-DIFFERENTIAL | |
| 56. | 331-1391 | [1] | COVER | |
| 58. | 331-1393 | [2] | WASHER-THRUST | |
| 59. | 416-2319 | [2] | GEAR-DIFFERENTIAL | |
| 60. | 331-1396 | [4] | GEAR-DIFFERENTIAL | |
| 61. | 331-1397 | [4] | WASHER-THRUST | |
| 62. | 331-1398 | [1] | SHAFT | |
| 63. | 331-1399 | [2] | SHAFT | |
| 64. | 204-3975 | [2] | PIN-SPRING | |
| 65. | 336-7377 M | [16] | BOLT-SOCKET HEAD (M12X1.5X35-MM) | |
| 66. | 233-8739 | [2] | HUB GP-WHEEL | |
| (EACH INCLUDES) | ||||
| 243-0378 | [1] | NUT | ||
| 67. | 5W-5682 | [2] | VALVE AS-PURGE (AXLE) | |
| 68. | 8T-4140 M | [28] | BOLT (M16X2X60-MM) | |
| 69. | 8U-5927 | [2] | SEAL-O-RING | |
| 70. | 375-2548 | [2] | GEAR-SUN | |
| 71. | 203-5417 | [2] | SEAL-LIP TYPE | |
| 72. | 121-8167 | [4] | BEARING-ROLLER | |
| 73. | 238-3298 | [2] | SLEEVE-SPACER | |
| 74. | 333-8029 | [2] | HUB-FLANGE | |
| 75. | 7X-5762 | [2] | SEAL-O-RING | |
| 76. | 263-3701 | [2] | GEAR-CARRIER | |
| 77. | 320-9728 | [4] | SEAL-O-RING | |
| 78. | 320-9731 | [2] | SEAL-O-RING | |
| 79. | 298-2314 | [2] | GEAR-INTERNAL | |
| 80. | 328-8804 | [2] | PISTON | |
| 81. | 263-4057 | [8] | DOWEL | |
| 82. | 355-2319 | [2] | SEAL | |
| 83. | 238-3303 | [2] | RING (2-MM THK) | |
| 84. | 8U-0754 | [2] | SEAL | |
| 85. | 238-3304 | [2] | RING (2-MM THK) | |
| 86. | 8U-3592 | [16] | SPRING | |
| 87. | 238-3305 | [16] | SPRING | |
| 88. | 298-2315 | [16] | BOLT-SPECIAL | |
| 89. | 8U-3591 | [16] | SPACER (6.5X15X7-MM THK) | |
| 90. | 263-3704 | [12] | DISC-CLUTCH (4.5-MM THK) | |
| 91. | 238-3309 | [10] | DISC-CLUTCH (2.5-MM THK) | |
| 92. | 238-3307 B | [2] | DISC-CLUTCH (2-MM THK) | |
| 93. | 238-3308 B | [2] | DISC-CLUTCH (3-MM THK) | |
| 94. | 238-3309 B | [2] | DISC-CLUTCH (2.5-MM THK) | |
| 95. | 375-1360 | [2] | WASHER-THRUST (10X40.2X5.1-MM THK) | |
| 96. | 375-8264 | [2] | CAGE-PINION | |
| 97. | 375-1359 | [6] | GEAR-PLANETARY | |
| 99. | 110-4737 | [6] | RING-RETAINING | |
| 100. | 6V-3668 M | [4] | BOLT (M12X1.75X30-MM) | |
| 101. | 243-5336 M | [2] | BOLT (M10X1.5X20-MM) | |
| 102. | 333-8037 | [20] | STUD-WHEEL | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00739280253
331-1400: AXLE & TRANSMISSION AR
331-1400 AXLE & TRANSMISSION AR
S/N FB81-UP
PART OF 394-5010 AXLE AR-REAR
Type 2
AN ATTACHMENT
S/N FB81-UP
PART OF 394-5010 AXLE AR-REAR
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your M318F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 416-1916 Y | [1] | TRANSMISSION GP (DIRECT DRIVE) | |
| 2. | 333-8043 | [2] | HOUSING-AXLE | |
| 3. | 333-8044 | [2] | SHAFT-AXLE | |
| 4. | 233-8738 | [1] | HOUSING | |
| 5. | 054-6514 B | [2] | SHIM (0.1-MM THK) | |
| 121-7679 B | [2] | SHIM (0.15-MM THK) | ||
| 054-6513 B | [2] | SHIM (0.2-MM THK) | ||
| 121-7680 B | [2] | SHIM (0.25-MM THK) | ||
| 054-6512 B | [2] | SHIM (0.3-MM THK) | ||
| 128-7675 B | [2] | SHIM (0.35-MM THK) | ||
| 7T-0564 B | [2] | SHIM (0.4-MM THK) | ||
| 121-7677 B | [2] | SHIM (0.45-MM THK) | ||
| 7T-0563 B | [2] | SHIM (0.5-MM THK) | ||
| 121-7678 B | [2] | SHIM (0.55-MM THK) | ||
| 7T-0562 B | [2] | SHIM (0.6-MM THK) | ||
| 128-7676 B | [2] | SHIM (0.65-MM THK) | ||
| 128-7677 B | [2] | SHIM (0.7-MM THK) | ||
| 128-7680 B | [2] | SHIM (0.75-MM THK) | ||
| 7T-0561 B | [2] | SHIM (0.8-MM THK) | ||
| 128-7681 B | [2] | SHIM (0.85-MM THK) | ||
| 128-7683 B | [2] | SHIM (0.9-MM THK) | ||
| 128-7684 B | [2] | SHIM (0.95-MM THK) | ||
| 7T-0560 B | [2] | SHIM (1-MM THK) | ||
| 128-7685 B | [2] | SHIM (1.05-MM THK) | ||
| 128-7686 B | [2] | SHIM (1.1-MM THK) | ||
| 128-7687 B | [2] | SHIM (1.15-MM THK) | ||
| 128-7688 B | [2] | SHIM (1.25-MM THK) | ||
| 128-7689 B | [2] | SHIM (1.3-MM THK) | ||
| 128-7690 B | [2] | SHIM (1.35-MM THK) | ||
| 7T-0558 B | [2] | SHIM (1.4-MM THK) | ||
| 128-7691 B | [2] | SHIM (1.45-MM THK) | ||
| 202-8137 B | [2] | SHIM (1.47-MM THK) | ||
| 128-7692 B | [2] | SHIM (1.5-MM THK) | ||
| 128-7693 B | [2] | SHIM (1.55-MM THK) | ||
| 128-7694 B | [2] | SHIM (1.6-MM THK) | ||
| 202-8138 B | [2] | SHIM (1.63-MM THK) | ||
| 128-7695 B | [2] | SHIM (1.65-MM THK) | ||
| 202-8139 B | [2] | SHIM (1.75-MM THK) | ||
| 202-8140 B | [2] | SHIM (1.7-MM THK) | ||
| 202-8141 B | [2] | SHIM (1.8-MM THK) | ||
| 202-8142 B | [2] | SHIM (1.85-MM THK) | ||
| 202-8143 B | [2] | SHIM (1.9-MM THK) | ||
| 202-8144 B | [2] | SHIM (1.95-MM THK) | ||
| 7T-0552 B | [2] | SHIM (2-MM THK) | ||
| 45. | 6Y-2942 | [2] | BEARING-TAPERED ROLLER | |
| 46. | 6Y-2943 | [2] | CUP-BEARING (TAPERED ROLLER) | |
| 47. | 8U-6079 | [2] | SEAL-O-RING | |
| 48. | 5W-5627 M | [32] | BOLT (M18X2.5X60-MM) | |
| 49. | 263-3629 | [3] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 203-0215 | [1] | SEAL-O-RING | ||
| 50. | 203-0215 | [1] | SEAL-O-RING | |
| 51. | 263-3630 | [1] | PLUG AS-MAGNET (AXLE HOUSING) | |
| 52. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 53. | 6V-8149 M | [10] | NUT (M12X1.75-THD) | |
| 54. | 372-4119 | [1] | GEAR-CROWN | |
| 55. | 519-7018 C | [1] | CASE-DIFFERENTIAL | |
| 56. | 331-1391 | [1] | COVER | |
| 58. | 331-1393 | [2] | WASHER-THRUST | |
| 59. | 416-2319 | [2] | GEAR-DIFFERENTIAL | |
| 60. | 331-1396 | [4] | GEAR-DIFFERENTIAL | |
| 61. | 331-1397 | [4] | WASHER-THRUST | |
| 62. | 331-1398 | [1] | SHAFT | |
| 63. | 519-7019 C | [2] | SHAFT | |
| 64. | 2M-3521 C | [2] | PIN-SPRING | |
| 65. | 336-7377 M | [16] | BOLT-SOCKET HEAD (M12X1.5X35-MM) | |
| 66. | 233-8739 | [2] | HUB GP-WHEEL | |
| (EACH INCLUDES) | ||||
| 243-0378 | [1] | NUT | ||
| 67. | 5W-5682 | [2] | VALVE AS-PURGE (AXLE) | |
| 68. | 8T-4140 M | [28] | BOLT (M16X2X60-MM) | |
| 69. | 8U-5927 | [2] | SEAL-O-RING | |
| 70. | 375-2548 | [2] | GEAR-SUN | |
| 71. | 203-5417 | [2] | SEAL-LIP TYPE | |
| 72. | 121-8167 | [4] | BEARING-ROLLER | |
| 73. | 238-3298 | [2] | SLEEVE-SPACER | |
| 74. | 333-8029 | [2] | HUB-FLANGE | |
| 75. | 7X-5762 | [2] | SEAL-O-RING | |
| 76. | 263-3701 | [2] | GEAR-CARRIER | |
| 77. | 320-9728 | [4] | SEAL-O-RING | |
| 78. | 320-9731 | [2] | SEAL-O-RING | |
| 79. | 298-2314 | [2] | GEAR-INTERNAL | |
| 80. | 328-8804 | [2] | PISTON | |
| 81. | 263-4057 | [8] | DOWEL | |
| 82. | 355-2319 | [2] | SEAL | |
| 83. | 238-3303 | [2] | RING (2-MM THK) | |
| 84. | 8U-0754 | [2] | SEAL | |
| 85. | 238-3304 | [2] | RING (2-MM THK) | |
| 86. | 8U-3592 | [16] | SPRING | |
| 87. | 238-3305 | [16] | SPRING | |
| 88. | 298-2315 | [16] | BOLT-SPECIAL | |
| 89. | 8U-3591 | [16] | SPACER (6.5X15X7-MM THK) | |
| 90. | 263-3704 | [12] | DISC-CLUTCH (4.5-MM THK) | |
| 91. | 238-3309 | [10] | DISC-CLUTCH (2.5-MM THK) | |
| 92. | 238-3307 B | [2] | DISC-CLUTCH (2-MM THK) | |
| 93. | 238-3308 B | [2] | DISC-CLUTCH (3-MM THK) | |
| 94. | 238-3309 B | [2] | DISC-CLUTCH (2.5-MM THK) | |
| 95. | 375-1360 | [2] | WASHER-THRUST (10X40.2X5.1-MM THK) | |
| 96. | 375-8264 | [2] | CAGE-PINION | |
| 97. | 375-1359 | [6] | GEAR-PLANETARY | |
| 99. | 110-4737 | [6] | RING-RETAINING | |
| 100. | 6V-3668 M | [4] | BOLT (M12X1.75X30-MM) | |
| 101. | 243-5336 M | [2] | BOLT (M10X1.5X20-MM) | |
| 102. | 333-8037 | [20] | STUD-WHEEL | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00739280254
394-5010: AXLE AR-REAR
For full view, you need register
Parts for your M318F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5W-0965 | [20] | RING | |
| 2. | 8U-5923 | [2] | FITTING AS | |
| 3. | 241-6199 | [1] | ELBOW AS | |
| 6V-8398 | [1] | SEAL-O-RING | ||
| 8T-6850 | [1] | SEAL-O-RING | ||
| 227-0061 | [1] | ELBOW | ||
| 4. | 303-9446 | [20] | LOCKWASHER | |
| 5. | 331-1400 Y | [1] | AXLE & TRANSMISSION AR (REAR) | |
| 6. | 303-9445 M | [20] | NUT-HEX FLANGE (M22X1.5-THD) | |
| 7. | 4I-6766 M | [8] | BOLT (M20X2.5X230-MM) | |
| 8. | 6V-6560 | [2] | SEAL-O-RING | |
| 9. | 6V-7688 M | [8] | LOCKNUT (M20X2.5-THD) | |
| 10. | 6V-8398 | [3] | SEAL-O-RING | |
| 11. | 8T-4123 | [16] | WASHER (22X35X3.5-MM THK) | |
| 12. | 8T-6850 | [1] | SEAL-O-RING | |
| 13. | 8T-7488 | [1] | CONNECTOR | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00739280255
331-1380: AXLE GP-STEERING
331-1380 AXLE GP-STEERING
S/N FB81-UP
PART OF 241-7435 AXLE & MTG AR-FRONT
AN ATTACHMENT
S/N FB81-UP
PART OF 241-7435 AXLE & MTG AR-FRONT
AN ATTACHMENT
For full view, you need register
Parts for your M318F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 372-4119 | [1] | GEAR-CROWN | |
| 2. | 372-4122 | [1] | PINION | |
| 3. | 110-0124 B | [1] | SHIM (2-MM THK) | |
| 110-0122 B | [1] | SHIM (1.8-MM THK) | ||
| 110-0121 B | [1] | SHIM (1.5-MM THK) | ||
| 110-0120 B | [1] | SHIM (1.2-MM THK) | ||
| 129-9912 B | [1] | SHIM (1.9-MM THK) | ||
| 129-9913 B | [1] | SHIM (1.7-MM THK) | ||
| 129-9914 B | [1] | SHIM (1.6-MM THK) | ||
| 129-9915 B | [1] | SHIM (1.4-MM THK) | ||
| 129-9916 B | [1] | SHIM (1.3-MM THK) | ||
| 190-8567 B | [1] | SHIM (1-MM THK) | ||
| 190-8566 B | [1] | SHIM (0.9-MM THK) | ||
| 190-8565 B | [1] | SHIM (0.8-MM THK) | ||
| 190-8563 B | [1] | SHIM (0.7-MM THK) | ||
| 190-8561 B | [1] | SHIM (0.6-MM THK) | ||
| 5W-2074 B | [1] | SHIM (0.5-MM THK) | ||
| 5W-2073 B | [1] | SHIM (0.3-MM THK) | ||
| 5W-3644 B | [1] | SHIM (0.2-MM THK) | ||
| 5W-2072 B | [1] | SHIM (0.1-MM THK) | ||
| 193-1123 B | [1] | SHIM (0.75-MM THK) | ||
| 193-1124 B | [1] | SHIM (0.65-MM THK) | ||
| 331-1378 B | [1] | SHIM (1.25-MM THK) | ||
| 331-1379 B | [1] | SHIM (1.35-MM THK) | ||
| 331-1381 B | [1] | SHIM (1.45-MM THK) | ||
| 331-1382 B | [1] | SHIM (1.55-MM THK) | ||
| 331-1383 B | [1] | SHIM (1.65-MM THK) | ||
| 331-1384 B | [1] | SHIM (1.75-MM THK) | ||
| 331-1386 B | [1] | SHIM (1.85-MM THK) | ||
| 30. | 333-8048 | [1] | BEARING-TAPERED ROLLER | |
| 31. | 110-0158 B | [1] | RING (16-MM THK) | |
| 490-0441 BC | [1] | RING (16.1-MM THK) | ||
| 110-0156 B | [1] | RING (16.2-MM THK) | ||
| 110-0155 B | [1] | RING (16.3-MM THK) | ||
| 110-0154 B | [1] | RING (16.4-MM THK) | ||
| 110-0153 B | [1] | RING (16.5-MM THK) | ||
| 110-0152 B | [1] | RING (16.6-MM THK) | ||
| 110-0151 B | [1] | RING (16.7-MM THK) | ||
| 490-0458 BC | [1] | RING (16.8-MM THK) | ||
| 110-0146 B | [1] | RING (16.92-MM THK) | ||
| 202-9680 BC | [2] | RING (16.9-MM THK) | ||
| 110-0139 B | [1] | RING (17.2-MM THK) | ||
| 490-7393 BC | [1] | RING (17.3-MM THK) | ||
| 490-7394 BC | [1] | RING (17.4-MM THK) | ||
| 420-6082 BC | [1] | RING (16.9-MM THK) | ||
| 110-0144 B | [1] | RING (16.98-MM THK) | ||
| 437-1494 BC | [1] | RING (17.04-MM THK) | ||
| 202-9635 B | [1] | RING (16.56-MM THK) | ||
| 202-9636 B | [1] | RING (16.62-MM THK) | ||
| 202-9637 B | [1] | RING (16.64-MM THK) | ||
| 202-9643 B | [1] | RING (16.68-MM THK) | ||
| 202-9644 B | [1] | RING (16.72-MM THK) | ||
| 202-9669 B | [1] | RING (16.74-MM THK) | ||
| 202-9670 B | [1] | RING (16.76-MM THK) | ||
| 202-9671 B | [1] | RING (16.78-MM THK) | ||
| 202-9672 B | [1] | RING (16.82-MM THK) | ||
| 202-9673 B | [1] | RING (16.84-MM THK) | ||
| 202-9679 B | [1] | RING (16.88-MM THK) | ||
| 202-9681 B | [1] | RING (16.94-MM THK) | ||
| 193-1454 B | [1] | RING (16.66-MM THK) | ||
| 490-7374 BC | [1] | RING (16.96-MM THK) | ||
| 193-1458 B | [1] | RING (17-MM THK) | ||
| 193-1460 B | [1] | RING (17.02-MM THK) | ||
| 473-6651 BC | [1] | RING (17.06-MM THK) | ||
| 193-1462 B | [1] | RING (17.08-MM THK) | ||
| 193-1463 B | [1] | RING (17.12-MM THK) | ||
| 193-1464 B | [1] | RING (17.14-MM THK) | ||
| 193-1465 B | [1] | RING (17.16-MM THK) | ||
| 193-1466 B | [1] | RING (17.18-MM THK) | ||
| 193-1467 B | [1] | RING (17.22-MM THK) | ||
| 193-1469 B | [1] | RING (17.24-MM THK) | ||
| 193-1470 B | [1] | RING (17.26-MM THK) | ||
| 193-1471 B | [1] | RING (17.28-MM THK) | ||
| 75. | 269-2407 | [1] | BEARING-ROLLER | |
| 76. | 418-8616 | [1] | SEAL-LIP TYPE | |
| 77. | 8U-2506 | [1] | WASHER (30.5X55.5X6-MM THK) | |
| 78. | 110-0848 M | [1] | NUT (M30X1.5-THD) | |
| 79. | 417-6660 | [1] | FLANGE-DRIVE | |
| 80. | 331-1388 | [1] | PLATE-DEFLECTOR | |
| 81. | 519-7018 C | [1] | CASE-DIFFERENTIAL | |
| 82. | 331-1391 | [1] | COVER | |
| 84. | 331-1393 | [2] | WASHER-THRUST | |
| 85. | 416-2319 C | [2] | GEAR-DIFFERENTIAL | |
| 86. | 331-1396 | [4] | GEAR-DIFFERENTIAL | |
| 87. | 331-1397 | [4] | WASHER-THRUST | |
| 88. | 331-1398 | [1] | SHAFT | |
| 89. | 519-7019 C | [2] | SHAFT | |
| 90. | 2M-3521 C | [2] | PIN-SPRING | |
| 91. | 336-7377 M | [16] | BOLT-SOCKET HEAD (M12X1.5X35-MM) | |
| 92. | 054-6514 B | [2] | SHIM (0.1-MM THK) | |
| 121-7679 B | [2] | SHIM (0.15-MM THK) | ||
| 054-6513 B | [2] | SHIM (0.2-MM THK) | ||
| 121-7680 B | [2] | SHIM (0.25-MM THK) | ||
| 054-6512 B | [2] | SHIM (0.3-MM THK) | ||
| 128-7675 B | [2] | SHIM (0.35-MM THK) | ||
| 7T-0564 B | [2] | SHIM (0.4-MM THK) | ||
| 121-7677 B | [2] | SHIM (0.45-MM THK) | ||
| 7T-0563 B | [2] | SHIM (0.5-MM THK) | ||
| 121-7678 B | [2] | SHIM (0.55-MM THK) | ||
| 7T-0562 B | [2] | SHIM (0.6-MM THK) | ||
| 128-7676 B | [2] | SHIM (0.65-MM THK) | ||
| 128-7677 B | [2] | SHIM (0.7-MM THK) | ||
| 128-7680 B | [2] | SHIM (0.75-MM THK) | ||
| 7T-0561 B | [2] | SHIM (0.8-MM THK) | ||
| 128-7681 B | [2] | SHIM (0.85-MM THK) | ||
| 128-7683 B | [2] | SHIM (0.9-MM THK) | ||
| 128-7684 B | [2] | SHIM (0.95-MM THK) | ||
| 7T-0560 B | [2] | SHIM (1-MM THK) | ||
| 128-7685 B | [2] | SHIM (1.05-MM THK) | ||
| 128-7686 B | [2] | SHIM (1.1-MM THK) | ||
| 128-7687 B | [2] | SHIM (1.15-MM THK) | ||
| 128-7688 B | [2] | SHIM (1.25-MM THK) | ||
| 128-7689 B | [2] | SHIM (1.3-MM THK) | ||
| 128-7690 B | [2] | SHIM (1.35-MM THK) | ||
| 7T-0558 B | [2] | SHIM (1.4-MM THK) | ||
| 128-7691 B | [2] | SHIM (1.45-MM THK) | ||
| 128-7692 B | [2] | SHIM (1.5-MM THK) | ||
| 128-7693 B | [2] | SHIM (1.55-MM THK) | ||
| 128-7694 B | [2] | SHIM (1.6-MM THK) | ||
| 128-7695 B | [2] | SHIM (1.65-MM THK) | ||
| 7T-0552 B | [2] | SHIM (2-MM THK) | ||
| 202-8137 B | [2] | SHIM (1.47-MM THK) | ||
| 202-8138 B | [2] | SHIM (1.63-MM THK) | ||
| 202-8139 B | [2] | SHIM (1.75-MM THK) | ||
| 202-8140 B | [2] | SHIM (1.7-MM THK) | ||
| 202-8141 B | [2] | SHIM (1.8-MM THK) | ||
| 202-8142 B | [2] | SHIM (1.85-MM THK) | ||
| 202-8143 B | [2] | SHIM (1.9-MM THK) | ||
| 202-8144 B | [2] | SHIM (1.95-MM THK) | ||
| 132. | 6Y-2942 | [2] | BEARING-TAPERED ROLLER | |
| 133. | 6Y-2943 | [2] | CUP-BEARING (TAPERED ROLLER) | |
| 134. | 8U-6079 | [2] | SEAL-O-RING | |
| 135. | 5W-5627 M | [32] | BOLT (M18X2.5X60-MM) | |
| 136. | 263-3629 | [3] | PLUG AS | |
| 137. | 263-3630 | [1] | PLUG AS-MAGNET (AXLE HOUSING) | |
| (EACH PLUG AS INCLUDES) | ||||
| 203-0215 | [1] | SEAL-O-RING | ||
| 138. | 203-0215 | [1] | SEAL-O-RING | |
| 139. | 333-8001 | [2] | HOUSING-AXLE | |
| 140. | 331-1409 | [1] | HOUSING | |
| 141. | 220-2593 | [4] | BUSHING-SLEEVE | |
| 142. | 333-8005 | [4] | SEAL-RING | |
| 143. | 388-2516 | [2] | BUSHING | |
| 144. | 333-8009 | [2] | UNIVERSAL JOINT GP | |
| (EACH INCLUDES) | ||||
| 271-2840 | [1] | FORK | ||
| 243-0906 | [2] | SPIDER AS | ||
| (EACH INCLUDES) | ||||
| 8T-9597 | [4] | RING-RETAINING | ||
| 146. | 243-0909 | [1] | TIE ROD GP (LH) | |
| 243-0910 | [1] | BALL JOINT AS | ||
| 295-6358 M | [1] | NUT (M28X1.5-THD) | ||
| 147. | 243-0911 | [1] | TIE ROD GP (RH) | |
| 243-0910 | [1] | BALL JOINT AS | ||
| 295-6358 M | [1] | NUT (M28X1.5-THD) | ||
| 148. | 164-5912 M | [2] | LOCKNUT (M27X1.5-THD) | |
| 149. | 517-6702 C | [1] | HOUSING GP-AXLE (LH) | |
| 150. | 517-6700 C | [1] | HOUSING GP-AXLE (RH) | |
| (EACH HOUSING GP INCLUDES) | ||||
| 150A. | 243-0378 | [1] | NUT (M110X2-THD) | |
| 151. | 4D-8648 | [4] | CUP-BEARING | |
| 152. | 110-0858 | [4] | CAP-SEALING | |
| 153. | 110-4743 | [4] | SEAL-O-RING | |
| 154. | 333-8023 | [2] | TRUNNION | |
| 155. | 517-5079 C | [2] | BEARING-PIN | |
| 156. | 135-3437 | [2] | SEAL-O-RING | |
| 157. | 296-4057 M | [16] | BOLT (M18X2.5X35-MM) | |
| 158. | 5W-2998 | [4] | FITTING-GREASE | |
| 160. | 243-0917 | [2] | WASHER-THRUST | |
| 161. | 243-0918 | [2] | WASHER-THRUST | |
| 162. | 110-0846 | [2] | RING-RETAINING | |
| 163. | 5W-5682 | [2] | VALVE AS-PURGE (AXLE) | |
| 164. | 8U-2354 B | [2] | SHIM (6-MM THK) | |
| 5W-6405 B | [2] | SHIM (6.5-MM THK) | ||
| 5W-7644 B | [2] | SHIM (4-MM THK) | ||
| 5W-7642 B | [2] | SHIM (5-MM THK) | ||
| 5W-7641 B | [2] | SHIM (5.5-MM THK) | ||
| 5W-7643 B | [1] | SHIM (4.5-MM THK) | ||
| 128-1733 B | [2] | SHIM (2-MM THK) | ||
| 128-1734 B | [2] | SHIM (3-MM THK) | ||
| 5W-6408 B | [2] | WASHER (18.5X35X8-MM THK) | ||
| 202-8145 B | [2] | WASHER (18.5X35X9-MM THK) | ||
| 202-8149 B | [2] | WASHER (18.5X35X14-MM THK) | ||
| 175. | 5W-2173 M | [4] | BOLT (M18X2.5X40-MM) | |
| 176. | 241-8122 M | [2] | NUT (M18X2.5-THD) | |
| 177. | 375-1285 Y | [1] | CYLINDER GP-STEERING | |
| 178. | 6V-3823 M | [5] | BOLT (M12X1.75X60-MM) | |
| 179. | 203-5417 | [2] | SEAL-LIP TYPE | |
| 180. | 121-8167 | [4] | BEARING-ROLLER | |
| 181. | 238-3298 | [2] | SLEEVE-SPACER | |
| 182. | 333-8029 | [2] | HUB-FLANGE | |
| 183. | 7X-5762 | [2] | SEAL-O-RING | |
| 184. | 263-3701 | [2] | GEAR-CARRIER | |
| 185. | 320-9728 | [4] | SEAL-O-RING | |
| 186. | 320-9731 | [2] | SEAL-O-RING | |
| 187. | 298-2314 | [2] | GEAR-INTERNAL | |
| 188. | 328-8804 | [2] | PISTON | |
| 189. | 263-4057 | [8] | DOWEL | |
| 190. | 355-2319 | [2] | SEAL | |
| 191. | 238-3303 | [2] | RING (2-MM THK) | |
| 192. | 8U-0754 | [2] | SEAL | |
| 193. | 238-3304 | [2] | RING (2-MM THK) | |
| 194. | 8U-3592 | [16] | SPRING | |
| 195. | 238-3305 | [16] | SPRING | |
| 196. | 298-2315 | [16] | BOLT-SPECIAL | |
| 197. | 8U-3591 | [16] | SPACER (6.5X15X7-MM THK) | |
| 198. | 263-3704 | [12] | DISC-CLUTCH (4.5-MM THK) | |
| 199. | 238-3309 | [10] | DISC-CLUTCH (2.5-MM THK) | |
| 200. | 238-3307 B | [2] | DISC-CLUTCH (2-MM THK) | |
| 238-3308 B | [2] | DISC-CLUTCH (3-MM THK) | ||
| 238-3309 B | [2] | DISC-CLUTCH (2.5-MM THK) | ||
| 203. | 375-1360 | [2] | WASHER-THRUST (10X40.2X5.1-MM THK) | |
| 204. | 375-8264 | [2] | CAGE-PINION | |
| 205. | 375-1359 | [6] | GEAR-PLANETARY | |
| 207. | 110-4737 | [6] | RING-RETAINING | |
| 208. | 6V-3668 M | [4] | BOLT (M12X1.75X30-MM) | |
| 209. | 243-5336 M | [2] | BOLT (M10X1.5X20-MM) | |
| 210. | 333-8037 | [20] | STUD-WHEEL | |
| 211. | 6V-2652 | [4] | CONE-BEARING | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00739280256
331-1395: AXLE GP-STEERING
331-1395 AXLE GP-STEERING
S/N FB81-UP
PART OF 241-7443 AXLE & MTG AR-FRONT
Type 1
AN ATTACHMENT
S/N FB81-UP
PART OF 241-7443 AXLE & MTG AR-FRONT
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your M318F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 372-4119 | [1] | GEAR-CROWN | |
| 2. | 372-4122 | [1] | PINION | |
| 3. | 110-0124 B | [1] | SHIM (2-MM THK) | |
| 110-0122 B | [1] | SHIM (1.8-MM THK) | ||
| 110-0121 B | [1] | SHIM (1.5-MM THK) | ||
| 110-0120 B | [1] | SHIM (1.2-MM THK) | ||
| 129-9912 B | [1] | SHIM (1.9-MM THK) | ||
| 129-9913 B | [1] | SHIM (1.7-MM THK) | ||
| 129-9914 B | [1] | SHIM (1.6-MM THK) | ||
| 129-9915 B | [1] | SHIM (1.4-MM THK) | ||
| 129-9916 B | [1] | SHIM (1.3-MM THK) | ||
| 190-8567 B | [1] | SHIM (1-MM THK) | ||
| 190-8566 B | [1] | SHIM (0.9-MM THK) | ||
| 190-8565 B | [1] | SHIM (0.8-MM THK) | ||
| 190-8563 B | [1] | SHIM (0.7-MM THK) | ||
| 190-8561 B | [1] | SHIM (0.6-MM THK) | ||
| 5W-2074 B | [1] | SHIM (0.5-MM THK) | ||
| 5W-2073 B | [1] | SHIM (0.3-MM THK) | ||
| 5W-3644 B | [1] | SHIM (0.2-MM THK) | ||
| 5W-2072 B | [1] | SHIM (0.1-MM THK) | ||
| 193-1123 B | [1] | SHIM (0.75-MM THK) | ||
| 193-1124 B | [1] | SHIM (0.65-MM THK) | ||
| 331-1378 B | [1] | SHIM (1.25-MM THK) | ||
| 331-1379 B | [1] | SHIM (1.35-MM THK) | ||
| 331-1381 B | [1] | SHIM (1.45-MM THK) | ||
| 331-1382 B | [1] | SHIM (1.55-MM THK) | ||
| 331-1383 B | [1] | SHIM (1.65-MM THK) | ||
| 331-1384 B | [1] | SHIM (1.75-MM THK) | ||
| 331-1386 B | [1] | SHIM (1.85-MM THK) | ||
| 30. | 333-8048 | [1] | BEARING-TAPERED ROLLER | |
| 31. | 110-0158 B | [1] | RING (16-MM THK) | |
| 110-0157 B | [1] | RING (16.1-MM THK) | ||
| 110-0156 B | [1] | RING (16.2-MM THK) | ||
| 110-0155 B | [1] | RING (16.3-MM THK) | ||
| 110-0154 B | [1] | RING (16.4-MM THK) | ||
| 110-0153 B | [1] | RING (16.5-MM THK) | ||
| 110-0152 B | [1] | RING (16.6-MM THK) | ||
| 110-0151 B | [1] | RING (16.7-MM THK) | ||
| 110-0150 B | [1] | RING (16.8-MM THK) | ||
| 110-0146 B | [1] | RING (16.92-MM THK) | ||
| 110-0140 B | [1] | RING (17.1-MM THK) | ||
| 110-0139 B | [1] | RING (17.2-MM THK) | ||
| 110-0138 B | [1] | RING (17.3-MM THK) | ||
| 110-0137 B | [1] | RING (17.4-MM THK) | ||
| 110-0148 B | [1] | RING (16.86-MM THK) | ||
| 110-0144 B | [1] | RING (16.98-MM THK) | ||
| 110-0142 B | [1] | RING (17.04-MM THK) | ||
| 202-9635 B | [1] | RING (16.56-MM THK) | ||
| 202-9636 B | [1] | RING (16.62-MM THK) | ||
| 202-9637 B | [1] | RING (16.64-MM THK) | ||
| 202-9643 B | [1] | RING (16.68-MM THK) | ||
| 202-9644 B | [1] | RING (16.72-MM THK) | ||
| 202-9669 B | [1] | RING (16.74-MM THK) | ||
| 202-9670 B | [1] | RING (16.76-MM THK) | ||
| 202-9671 B | [1] | RING (16.78-MM THK) | ||
| 202-9672 B | [1] | RING (16.82-MM THK) | ||
| 202-9673 B | [1] | RING (16.84-MM THK) | ||
| 202-9679 B | [1] | RING (16.88-MM THK) | ||
| 202-9680 B | [1] | RING (16.9-MM THK) | ||
| 202-9681 B | [1] | RING (16.94-MM THK) | ||
| 193-1454 B | [1] | RING (16.66-MM THK) | ||
| 193-1455 B | [1] | RING (16.96-MM THK) | ||
| 193-1458 B | [1] | RING (17-MM THK) | ||
| 193-1460 B | [1] | RING (17.02-MM THK) | ||
| 193-1461 B | [1] | RING (17.06-MM THK) | ||
| 193-1462 B | [1] | RING (17.08-MM THK) | ||
| 193-1463 B | [1] | RING (17.12-MM THK) | ||
| 193-1464 B | [1] | RING (17.14-MM THK) | ||
| 193-1465 B | [1] | RING (17.16-MM THK) | ||
| 193-1466 B | [1] | RING (17.18-MM THK) | ||
| 193-1467 B | [1] | RING (17.22-MM THK) | ||
| 193-1469 B | [1] | RING (17.24-MM THK) | ||
| 193-1470 B | [1] | RING (17.26-MM THK) | ||
| 193-1471 B | [1] | RING (17.28-MM THK) | ||
| 75. | 269-2407 | [1] | BEARING-ROLLER | |
| 76. | 418-8616 | [1] | SEAL-LIP TYPE | |
| 77. | 8U-2506 | [1] | WASHER (30.5X55.5X6-MM THK) | |
| 78. | 110-0848 M | [1] | NUT (M30X1.5-THD) | |
| 79. | 417-6660 | [1] | FLANGE-DRIVE | |
| 80. | 331-1388 | [1] | PLATE-DEFLECTOR | |
| 81. | 371-7328 | [1] | CASE-DIFFERENTIAL | |
| 82. | 331-1391 | [1] | COVER | |
| 84. | 331-1393 | [2] | WASHER-THRUST | |
| 85. | 416-2319 C | [2] | GEAR-DIFFERENTIAL | |
| 86. | 331-1396 | [4] | GEAR-DIFFERENTIAL | |
| 87. | 331-1397 | [4] | WASHER-THRUST | |
| 88. | 331-1398 | [1] | SHAFT | |
| 89. | 331-1399 | [2] | SHAFT | |
| 90. | 204-3975 | [2] | PIN-SPRING | |
| 91. | 336-7377 M | [16] | BOLT-SOCKET HEAD (M12X1.5X35-MM) | |
| 92. | 054-6514 B | [2] | SHIM (0.1-MM THK) | |
| 121-7679 B | [2] | SHIM (0.15-MM THK) | ||
| 054-6513 B | [2] | SHIM (0.2-MM THK) | ||
| 121-7680 B | [2] | SHIM (0.25-MM THK) | ||
| 054-6512 B | [2] | SHIM (0.3-MM THK) | ||
| 7T-0564 B | [2] | SHIM (0.4-MM THK) | ||
| 121-7677 B | [2] | SHIM (0.45-MM THK) | ||
| 7T-0563 B | [2] | SHIM (0.5-MM THK) | ||
| 121-7678 B | [2] | SHIM (0.55-MM THK) | ||
| 7T-0562 B | [2] | SHIM (0.6-MM THK) | ||
| 128-7676 B | [2] | SHIM (0.65-MM THK) | ||
| 128-7677 B | [2] | SHIM (0.7-MM THK) | ||
| 128-7680 B | [2] | SHIM (0.75-MM THK) | ||
| 7T-0561 B | [2] | SHIM (0.8-MM THK) | ||
| 128-7681 B | [2] | SHIM (0.85-MM THK) | ||
| 128-7683 B | [2] | SHIM (0.9-MM THK) | ||
| 128-7684 B | [2] | SHIM (0.95-MM THK) | ||
| 7T-0560 B | [2] | SHIM (1-MM THK) | ||
| 128-7685 B | [2] | SHIM (1.05-MM THK) | ||
| 128-7686 B | [2] | SHIM (1.1-MM THK) | ||
| 128-7687 B | [2] | SHIM (1.15-MM THK) | ||
| 128-7688 B | [2] | SHIM (1.25-MM THK) | ||
| 128-7689 B | [2] | SHIM (1.3-MM THK) | ||
| 128-7690 B | [2] | SHIM (1.35-MM THK) | ||
| 7T-0558 B | [2] | SHIM (1.4-MM THK) | ||
| 128-7691 B | [2] | SHIM (1.45-MM THK) | ||
| 128-7692 B | [2] | SHIM (1.5-MM THK) | ||
| 128-7693 B | [2] | SHIM (1.55-MM THK) | ||
| 128-7694 B | [2] | SHIM (1.6-MM THK) | ||
| 128-7695 B | [2] | SHIM (1.65-MM THK) | ||
| 7T-0552 B | [2] | SHIM (2-MM THK) | ||
| 202-8137 B | [2] | SHIM (1.47-MM THK) | ||
| 202-8138 B | [2] | SHIM (1.63-MM THK) | ||
| 202-8139 B | [2] | SHIM (1.75-MM THK) | ||
| 202-8140 B | [2] | SHIM (1.7-MM THK) | ||
| 202-8141 B | [2] | SHIM (1.8-MM THK) | ||
| 202-8142 B | [2] | SHIM (1.85-MM THK) | ||
| 202-8143 B | [2] | SHIM (1.9-MM THK) | ||
| 202-8144 B | [2] | SHIM (1.95-MM THK) | ||
| 132. | 6Y-2942 | [2] | BEARING-TAPERED ROLLER | |
| 133. | 6Y-2943 | [2] | CUP-BEARING (TAPERED ROLLER) | |
| 134. | 8U-6079 | [2] | SEAL-O-RING | |
| 135. | 5W-5627 M | [32] | BOLT (M18X2.5X60-MM) | |
| 136. | 263-3629 | [3] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 203-0215 | [1] | SEAL-O-RING | ||
| 137. | 203-0215 | [1] | SEAL-O-RING | |
| 138. | 263-3630 | [1] | PLUG AS-MAGNET (AXLE HOUSING) | |
| 139. | 333-8002 | [2] | HOUSING-AXLE | |
| 140. | 331-1409 | [1] | HOUSING | |
| 141. | 220-2593 | [4] | BUSHING-SLEEVE | |
| 142. | 333-8005 | [4] | SEAL-RING | |
| 143. | 388-2516 | [2] | BUSHING | |
| 144. | 333-8012 | [2] | UNIVERSAL JOINT GP | |
| (EACH INCLUDES) | ||||
| 271-2840 | [1] | FORK | ||
| 243-0906 | [2] | SPIDER AS | ||
| (EACH INCLUDES) | ||||
| 8T-9597 | [4] | RING-RETAINING | ||
| 145. | 243-0976 | [1] | TIE ROD GP (LH) | |
| 243-0910 | [1] | BALL JOINT AS | ||
| 295-6358 M | [1] | NUT (M28X1.5-THD) | ||
| 295-6537 | [1] | JOINT AS (LH) | ||
| 146. | 243-0978 | [1] | TIE ROD GP (RH) | |
| 243-0910 | [1] | BALL JOINT AS | ||
| 295-6358 M | [1] | NUT (M28X1.5-THD) | ||
| 295-6538 | [1] | JOINT AS (RH) | ||
| 147. | 164-5912 M | [2] | LOCKNUT (M27X1.5-THD) | |
| 148. | 333-8016 | [1] | HOUSING GP-AXLE (LH) | |
| 148A. | 243-0378 | [1] | NUT | |
| 149. | 333-8017 | [1] | HOUSING GP-AXLE (RH) | |
| 149A. | 243-0378 | [1] | NUT | |
| 150. | 6V-2652 | [4] | CONE-BEARING | |
| 151. | 110-0858 | [4] | CAP-SEALING | |
| 152. | 110-4743 | [4] | SEAL-O-RING | |
| 153. | 333-8023 | [2] | TRUNNION | |
| 154. | 333-8024 | [2] | TRUNNION | |
| 155. | 135-3437 | [2] | SEAL-O-RING | |
| 156. | 296-4057 M | [16] | BOLT (M18X2.5X35-MM) | |
| 157. | 5W-2998 | [4] | FITTING-GREASE | |
| 160. | 243-0917 | [2] | WASHER-THRUST | |
| 161. | 243-0918 | [2] | WASHER-THRUST | |
| 162. | 110-0846 | [2] | RING-RETAINING | |
| 163. | 5W-5682 | [2] | VALVE AS-PURGE (AXLE) | |
| 164. | 8U-2354 B | [2] | SHIM (6-MM THK) | |
| 5W-6405 B | [2] | SHIM (6.5-MM THK) | ||
| 5W-7644 B | [2] | SHIM (4-MM THK) | ||
| 5W-7642 B | [2] | SHIM (5-MM THK) | ||
| 5W-7641 B | [2] | SHIM (5.5-MM THK) | ||
| 5W-7643 B | [1] | SHIM (4.5-MM THK) | ||
| 128-1733 B | [2] | SHIM (2-MM THK) | ||
| 128-1734 B | [2] | SHIM (3-MM THK) | ||
| 5W-6408 B | [2] | WASHER (18.5X35X8-MM THK) | ||
| 202-8145 B | [2] | WASHER (18.5X35X9-MM THK) | ||
| 202-8149 B | [2] | WASHER (18.5X35X14-MM THK) | ||
| 175. | 5W-2173 M | [4] | BOLT (M18X2.5X40-MM) | |
| 176. | 241-8122 M | [2] | NUT (M18X2.5-THD) | |
| 177. | 375-1285 Y | [1] | CYLINDER GP-STEERING | |
| 178. | 6V-3823 M | [5] | BOLT (M12X1.75X60-MM) | |
| 179. | 203-5417 | [2] | SEAL-LIP TYPE | |
| 180. | 121-8167 | [4] | BEARING-ROLLER | |
| 181. | 238-3298 | [2] | SLEEVE-SPACER | |
| 182. | 333-8029 | [2] | HUB-FLANGE | |
| 183. | 7X-5762 | [2] | SEAL-O-RING | |
| 184. | 263-3701 | [2] | GEAR-CARRIER | |
| 185. | 320-9728 | [4] | SEAL-O-RING | |
| 186. | 320-9731 | [2] | SEAL-O-RING | |
| 187. | 298-2314 | [2] | GEAR-INTERNAL | |
| 188. | 328-8804 | [2] | PISTON | |
| 189. | 263-4057 | [8] | DOWEL | |
| 190. | 355-2319 | [2] | SEAL | |
| 191. | 238-3303 | [2] | RING (2-MM THK) | |
| 192. | 8U-0754 | [2] | SEAL | |
| 193. | 238-3304 | [2] | RING (2-MM THK) | |
| 194. | 8U-3592 | [16] | SPRING | |
| 195. | 238-3305 | [16] | SPRING | |
| 196. | 298-2315 | [16] | BOLT-SPECIAL | |
| 197. | 8U-3591 | [16] | SPACER (6.5X15X7-MM THK) | |
| 198. | 263-3704 | [12] | DISC-CLUTCH (4.5-MM THK) | |
| 199. | 238-3309 B | [12] | DISC-CLUTCH (2.5-MM THK) | |
| 238-3307 B | [2] | DISC-CLUTCH (2-MM THK) | ||
| 238-3308 B | [2] | DISC-CLUTCH (3-MM THK) | ||
| 202. | 375-1360 | [2] | WASHER-THRUST (10X40.2X5.1-MM THK) | |
| 203. | 375-8264 | [2] | CAGE-PINION | |
| 204. | 375-1359 | [6] | GEAR-PLANETARY | |
| 206. | 110-4737 | [6] | RING-RETAINING | |
| 207. | 6V-3668 M | [4] | BOLT (M12X1.75X30-MM) | |
| 208. | 243-5336 M | [2] | BOLT (M10X1.5X20-MM) | |
| 209. | 333-8037 | [20] | STUD-WHEEL | |
| 210. | 4D-8648 | [4] | CUP-BEARING | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00739280257
331-1395: AXLE GP-STEERING
331-1395 AXLE GP-STEERING
S/N FB81-UP
PART OF 241-7443 AXLE & MTG AR-FRONT
Type 2
AN ATTACHMENT
S/N FB81-UP
PART OF 241-7443 AXLE & MTG AR-FRONT
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your M318F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 372-4119 | [1] | GEAR-CROWN | |
| 2. | 372-4122 | [1] | PINION | |
| 3. | 110-0124 B | [1] | SHIM (2-MM THK) | |
| 110-0122 B | [1] | SHIM (1.8-MM THK) | ||
| 110-0121 B | [1] | SHIM (1.5-MM THK) | ||
| 110-0120 B | [1] | SHIM (1.2-MM THK) | ||
| 129-9912 B | [1] | SHIM (1.9-MM THK) | ||
| 129-9913 B | [1] | SHIM (1.7-MM THK) | ||
| 129-9914 B | [1] | SHIM (1.6-MM THK) | ||
| 129-9915 B | [1] | SHIM (1.4-MM THK) | ||
| 129-9916 B | [1] | SHIM (1.3-MM THK) | ||
| 190-8567 B | [1] | SHIM (1-MM THK) | ||
| 190-8566 B | [1] | SHIM (0.9-MM THK) | ||
| 190-8565 B | [1] | SHIM (0.8-MM THK) | ||
| 190-8563 B | [1] | SHIM (0.7-MM THK) | ||
| 190-8561 B | [1] | SHIM (0.6-MM THK) | ||
| 5W-2074 B | [1] | SHIM (0.5-MM THK) | ||
| 5W-2073 B | [1] | SHIM (0.3-MM THK) | ||
| 5W-3644 B | [1] | SHIM (0.2-MM THK) | ||
| 5W-2072 B | [1] | SHIM (0.1-MM THK) | ||
| 193-1123 B | [1] | SHIM (0.75-MM THK) | ||
| 193-1124 B | [1] | SHIM (0.65-MM THK) | ||
| 331-1378 B | [1] | SHIM (1.25-MM THK) | ||
| 331-1379 B | [1] | SHIM (1.35-MM THK) | ||
| 331-1381 B | [1] | SHIM (1.45-MM THK) | ||
| 331-1382 B | [1] | SHIM (1.55-MM THK) | ||
| 331-1383 B | [1] | SHIM (1.65-MM THK) | ||
| 331-1384 B | [1] | SHIM (1.75-MM THK) | ||
| 331-1386 B | [1] | SHIM (1.85-MM THK) | ||
| 30. | 333-8048 | [1] | BEARING-TAPERED ROLLER | |
| 31. | 110-0158 B | [1] | RING (16-MM THK) | |
| 490-0441 BC | [1] | RING (16.1-MM THK) | ||
| 110-0156 B | [1] | RING (16.2-MM THK) | ||
| 110-0155 B | [1] | RING (16.3-MM THK) | ||
| 110-0154 B | [1] | RING (16.4-MM THK) | ||
| 110-0153 B | [1] | RING (16.5-MM THK) | ||
| 110-0152 B | [1] | RING (16.6-MM THK) | ||
| 110-0151 B | [1] | RING (16.7-MM THK) | ||
| 490-0458 BC | [1] | RING (16.8-MM THK) | ||
| 110-0146 B | [1] | RING (16.92-MM THK) | ||
| 110-0139 B | [1] | RING (17.2-MM THK) | ||
| 490-7393 BC | [1] | RING (17.3-MM THK) | ||
| 490-7394 BC | [1] | RING (17.4-MM THK) | ||
| 420-6082 BC | [1] | RING (16.9-MM THK) | ||
| 110-0144 B | [1] | RING (16.98-MM THK) | ||
| 437-1494 BC | [1] | RING (17.04-MM THK) | ||
| 202-9635 B | [1] | RING (16.56-MM THK) | ||
| 202-9636 B | [1] | RING (16.62-MM THK) | ||
| 202-9637 B | [1] | RING (16.64-MM THK) | ||
| 202-9643 B | [1] | RING (16.68-MM THK) | ||
| 202-9644 B | [1] | RING (16.72-MM THK) | ||
| 202-9669 B | [1] | RING (16.74-MM THK) | ||
| 202-9670 B | [1] | RING (16.76-MM THK) | ||
| 202-9671 B | [1] | RING (16.78-MM THK) | ||
| 202-9672 B | [1] | RING (16.82-MM THK) | ||
| 202-9673 B | [1] | RING (16.84-MM THK) | ||
| 202-9679 B | [1] | RING (16.88-MM THK) | ||
| 202-9680 BC | [2] | RING (16.9-MM THK) | ||
| 202-9681 B | [1] | RING (16.94-MM THK) | ||
| 193-1454 B | [1] | RING (16.66-MM THK) | ||
| 490-7374 BC | [1] | RING (16.96-MM THK) | ||
| 193-1458 B | [1] | RING (17-MM THK) | ||
| 193-1460 B | [1] | RING (17.02-MM THK) | ||
| 473-6651 BC | [1] | RING (17.06-MM THK) | ||
| 193-1462 B | [1] | RING (17.08-MM THK) | ||
| 193-1463 B | [1] | RING (17.12-MM THK) | ||
| 193-1464 B | [1] | RING (17.14-MM THK) | ||
| 193-1465 B | [1] | RING (17.16-MM THK) | ||
| 193-1466 B | [1] | RING (17.18-MM THK) | ||
| 193-1467 B | [1] | RING (17.22-MM THK) | ||
| 193-1469 B | [1] | RING (17.24-MM THK) | ||
| 193-1470 B | [1] | RING (17.26-MM THK) | ||
| 193-1471 B | [1] | RING (17.28-MM THK) | ||
| 75. | 269-2407 | [1] | BEARING-ROLLER | |
| 76. | 418-8616 | [1] | SEAL-LIP TYPE | |
| 77. | 8U-2506 | [1] | WASHER (30.5X55.5X6-MM THK) | |
| 78. | 110-0848 M | [1] | NUT (M30X1.5-THD) | |
| 79. | 417-6660 | [1] | FLANGE-DRIVE | |
| 80. | 331-1388 | [1] | PLATE-DEFLECTOR | |
| 81. | 519-7018 C | [1] | CASE-DIFFERENTIAL | |
| 82. | 331-1391 | [1] | COVER | |
| 84. | 331-1393 | [2] | WASHER-THRUST | |
| 85. | 416-2319 C | [2] | GEAR-DIFFERENTIAL | |
| 86. | 331-1396 | [4] | GEAR-DIFFERENTIAL | |
| 87. | 331-1397 | [4] | WASHER-THRUST | |
| 88. | 331-1398 | [1] | SHAFT | |
| 89. | 519-7019 C | [2] | SHAFT | |
| 90. | 2M-3521 C | [2] | PIN-SPRING | |
| 91. | 336-7377 M | [16] | BOLT-SOCKET HEAD (M12X1.5X35-MM) | |
| 92. | 054-6514 B | [2] | SHIM (0.1-MM THK) | |
| 121-7679 B | [2] | SHIM (0.15-MM THK) | ||
| 054-6513 B | [2] | SHIM (0.2-MM THK) | ||
| 121-7680 B | [2] | SHIM (0.25-MM THK) | ||
| 054-6512 B | [2] | SHIM (0.3-MM THK) | ||
| 7T-0564 B | [2] | SHIM (0.4-MM THK) | ||
| 121-7677 B | [2] | SHIM (0.45-MM THK) | ||
| 7T-0563 B | [2] | SHIM (0.5-MM THK) | ||
| 121-7678 B | [2] | SHIM (0.55-MM THK) | ||
| 7T-0562 B | [2] | SHIM (0.6-MM THK) | ||
| 128-7676 B | [2] | SHIM (0.65-MM THK) | ||
| 128-7677 B | [2] | SHIM (0.7-MM THK) | ||
| 128-7675 B | [2] | SHIM (0.35-MM THK) | ||
| 128-7680 B | [2] | SHIM (0.75-MM THK) | ||
| 7T-0561 B | [2] | SHIM (0.8-MM THK) | ||
| 128-7681 B | [2] | SHIM (0.85-MM THK) | ||
| 128-7683 B | [2] | SHIM (0.9-MM THK) | ||
| 128-7684 B | [2] | SHIM (0.95-MM THK) | ||
| 7T-0560 B | [2] | SHIM (1-MM THK) | ||
| 128-7685 B | [2] | SHIM (1.05-MM THK) | ||
| 128-7686 B | [2] | SHIM (1.1-MM THK) | ||
| 128-7687 B | [2] | SHIM (1.15-MM THK) | ||
| 128-7688 B | [2] | SHIM (1.25-MM THK) | ||
| 128-7689 B | [2] | SHIM (1.3-MM THK) | ||
| 128-7690 B | [2] | SHIM (1.35-MM THK) | ||
| 7T-0558 B | [2] | SHIM (1.4-MM THK) | ||
| 128-7691 B | [2] | SHIM (1.45-MM THK) | ||
| 128-7692 B | [2] | SHIM (1.5-MM THK) | ||
| 128-7693 B | [2] | SHIM (1.55-MM THK) | ||
| 128-7694 B | [2] | SHIM (1.6-MM THK) | ||
| 128-7695 B | [2] | SHIM (1.65-MM THK) | ||
| 7T-0552 B | [2] | SHIM (2-MM THK) | ||
| 202-8137 B | [2] | SHIM (1.47-MM THK) | ||
| 202-8138 B | [2] | SHIM (1.63-MM THK) | ||
| 202-8139 B | [2] | SHIM (1.75-MM THK) | ||
| 202-8140 B | [2] | SHIM (1.7-MM THK) | ||
| 202-8141 B | [2] | SHIM (1.8-MM THK) | ||
| 202-8142 B | [2] | SHIM (1.85-MM THK) | ||
| 202-8143 B | [2] | SHIM (1.9-MM THK) | ||
| 202-8144 B | [2] | SHIM (1.95-MM THK) | ||
| 132. | 6Y-2942 | [2] | BEARING-TAPERED ROLLER | |
| 133. | 6Y-2943 | [2] | CUP-BEARING (TAPERED ROLLER) | |
| 134. | 8U-6079 | [2] | SEAL-O-RING | |
| 135. | 5W-5627 M | [32] | BOLT (M18X2.5X60-MM) | |
| 136. | 263-3629 | [3] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 203-0215 | [1] | SEAL-O-RING | ||
| 137. | 203-0215 | [1] | SEAL-O-RING | |
| 138. | 263-3630 | [1] | PLUG AS-MAGNET (AXLE HOUSING) | |
| 139. | 333-8002 | [2] | HOUSING-AXLE | |
| 140. | 331-1409 | [1] | HOUSING | |
| 141. | 220-2593 | [4] | BUSHING-SLEEVE | |
| 142. | 333-8005 | [4] | SEAL-RING | |
| 143. | 388-2516 | [2] | BUSHING | |
| 144. | 333-8012 | [2] | UNIVERSAL JOINT GP | |
| (EACH INCLUDES) | ||||
| 271-2840 | [1] | FORK | ||
| 243-0906 | [2] | SPIDER AS | ||
| (EACH INCLUDES) | ||||
| 8T-9597 | [4] | RING-RETAINING | ||
| 145. | 243-0976 | [1] | TIE ROD GP (LH) | |
| 243-0910 | [1] | BALL JOINT AS | ||
| 295-6358 M | [1] | NUT (M28X1.5-THD) | ||
| 295-6537 | [1] | JOINT AS (LH) | ||
| 146. | 243-0978 | [1] | TIE ROD GP (RH) | |
| 243-0910 | [1] | BALL JOINT AS | ||
| 295-6358 M | [1] | NUT (M28X1.5-THD) | ||
| 295-6538 | [1] | JOINT AS (RH) | ||
| 147. | 164-5912 M | [2] | LOCKNUT (M27X1.5-THD) | |
| 148. | 517-6702 C | [1] | HOUSING GP-AXLE | |
| 148A. | 243-0378 | [1] | NUT | |
| 149. | 517-6700 C | [1] | HOUSING GP-AXLE | |
| 149A. | 243-0378 | [1] | NUT | |
| 150. | 6V-2652 | [4] | CONE-BEARING | |
| 151. | 110-0858 | [4] | CAP-SEALING | |
| 152. | 110-4743 | [4] | SEAL-O-RING | |
| 153. | 333-8023 | [2] | TRUNNION | |
| 154. | 517-5079 | [2] | BEARING-PIN | |
| 155. | 135-3437 | [2] | SEAL-O-RING | |
| 156. | 296-4057 M | [16] | BOLT (M18X2.5X35-MM) | |
| 157. | 5W-2998 | [4] | FITTING-GREASE | |
| 160. | 243-0917 | [2] | WASHER-THRUST | |
| 161. | 243-0918 | [2] | WASHER-THRUST | |
| 162. | 110-0846 | [2] | RING-RETAINING | |
| 163. | 5W-5682 | [2] | VALVE AS-PURGE (AXLE) | |
| 164. | 8U-2354 B | [2] | SHIM (6-MM THK) | |
| 5W-6405 B | [2] | SHIM (6.5-MM THK) | ||
| 5W-7644 B | [2] | SHIM (4-MM THK) | ||
| 5W-7642 B | [2] | SHIM (5-MM THK) | ||
| 5W-7641 B | [2] | SHIM (5.5-MM THK) | ||
| 5W-7643 B | [1] | SHIM (4.5-MM THK) | ||
| 128-1733 B | [2] | SHIM (2-MM THK) | ||
| 128-1734 B | [2] | SHIM (3-MM THK) | ||
| 5W-6408 B | [2] | WASHER (18.5X35X8-MM THK) | ||
| 202-8145 B | [2] | WASHER (18.5X35X9-MM THK) | ||
| 202-8149 B | [2] | WASHER (18.5X35X14-MM THK) | ||
| 175. | 5W-2173 M | [4] | BOLT (M18X2.5X40-MM) | |
| 176. | 241-8122 M | [2] | NUT (M18X2.5-THD) | |
| 177. | 375-1285 Y | [1] | CYLINDER GP-STEERING | |
| 178. | 6V-3823 M | [5] | BOLT (M12X1.75X60-MM) | |
| 179. | 203-5417 | [2] | SEAL-LIP TYPE | |
| 180. | 121-8167 | [4] | BEARING-ROLLER | |
| 181. | 238-3298 | [2] | SLEEVE-SPACER | |
| 182. | 333-8029 | [2] | HUB-FLANGE | |
| 183. | 7X-5762 | [2] | SEAL-O-RING | |
| 184. | 263-3701 | [2] | GEAR-CARRIER | |
| 185. | 320-9728 | [4] | SEAL-O-RING | |
| 186. | 320-9731 | [2] | SEAL-O-RING | |
| 187. | 298-2314 | [2] | GEAR-INTERNAL | |
| 188. | 328-8804 | [2] | PISTON | |
| 189. | 263-4057 | [8] | DOWEL | |
| 190. | 355-2319 | [2] | SEAL | |
| 191. | 238-3303 | [2] | RING (2-MM THK) | |
| 192. | 8U-0754 | [2] | SEAL | |
| 193. | 238-3304 | [2] | RING (2-MM THK) | |
| 194. | 8U-3592 | [16] | SPRING | |
| 195. | 238-3305 | [16] | SPRING | |
| 196. | 298-2315 | [16] | BOLT-SPECIAL | |
| 197. | 8U-3591 | [16] | SPACER (6.5X15X7-MM THK) | |
| 198. | 263-3704 | [12] | DISC-CLUTCH (4.5-MM THK) | |
| 199. | 238-3309 B | [12] | DISC-CLUTCH (2.5-MM THK) | |
| 238-3307 B | [2] | DISC-CLUTCH (2-MM THK) | ||
| 238-3308 B | [2] | DISC-CLUTCH (3-MM THK) | ||
| 202. | 375-1360 | [2] | WASHER-THRUST (10X40.2X5.1-MM THK) | |
| 203. | 375-8264 | [2] | CAGE-PINION | |
| 204. | 375-1359 | [6] | GEAR-PLANETARY | |
| 206. | 110-4737 | [6] | RING-RETAINING | |
| 207. | 6V-3668 M | [4] | BOLT (M12X1.75X30-MM) | |
| 208. | 243-5336 M | [2] | BOLT (M10X1.5X20-MM) | |
| 209. | 333-8037 | [20] | STUD-WHEEL | |
| 210. | 4D-8648 | [4] | CUP-BEARING | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00739280258
433-6275: POWER TRAIN AR
433-6275 POWER TRAIN AR
S/N FB81-UP
PART OF 423-0703, 423-0706, 423-0707, 423-0708, 503-4254 UNDERCARRIAGE AR, 503-4255 UNDERCARRIAGE FRAME & LINES AR
AN ATTACHMENT
S/N FB81-UP
PART OF 423-0703, 423-0706, 423-0707, 423-0708, 503-4254 UNDERCARRIAGE AR, 503-4255 UNDERCARRIAGE FRAME & LINES AR
AN ATTACHMENT
For full view, you need register
Parts for your M318F EXCAVATOR:
CATERPILLAR SIS#M00739280259
442-1605: POWER TRAIN AR
442-1605 POWER TRAIN AR
S/N FB81-UP
PART OF 423-0709, 423-0710 UNDERCARRIAGE AR
AN ATTACHMENT
S/N FB81-UP
PART OF 423-0709, 423-0710 UNDERCARRIAGE AR
AN ATTACHMENT
For full view, you need register
