AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

986 Wheel Loader 98600001-UP (MACHINE) POWERED BY C15 Engine ELECTRICAL AND STARTING SYSTEM Caterpillar SIS



WHEEL LOADER 986H WHEEL LOADER 986
 986 Wheel Loader 98600001-UP (MACHINE) POWERED BY C15 Engine M0074008 986H 986   (2016)

Parts group 986H:

  For full view, you need register
ELECTRICAL AND STARTING SYSTEM
ALARM GP
ALARM GP
3E-6328 ALARM GP
3E-6328 ALARM GP
S/N 9861-UP
24-VOLT
PART OF 382-0483 WIRING GP-CAB
ALTERNATOR GP-CHARGING
MOUNTING GP-ALTERNATOR & COMPR
188-1754 MOUNTING GP-ALTERNATOR & COMPR
188-1754 MOUNTING GP-ALTERNATOR & COMPR
S/N TXY2776-UP
PART OF 377-6189 ENGINE AR-COMPLETE
MOUNTING GP-ALTERNATOR & COMPR
464-7706 MOUNTING GP-ALTERNATOR & COMPR
464-7706 MOUNTING GP-ALTERNATOR & COMPR
S/N TXY1-UP
PART OF 464-4684, 464-4685, 464-4686, 478-4677, 478-4681 ENGINE AR-COMPLETE
ALTERNATOR GP-CHARGING
458-8301 ALTERNATOR GP-CHARGING
458-8301 ALTERNATOR GP-CHARGING
S/N 9861-UP
24-VOLT, 115-AMPERE
PART OF 367-4440 INSTALLATION AR-ENGINE
BATTERY GP
BATTERY & WIRING GP
367-4342 BATTERY & WIRING GP
367-4342 BATTERY & WIRING GP
S/N 9861-UP
PART OF 367-4420 ELECTRICAL AR
BATTERY & WIRING GP
367-4802 BATTERY & WIRING GP
367-4802 BATTERY & WIRING GP -COLD START
S/N 9861-UP
PART OF 367-4500 STARTING AR-COLD WEATHER
CIRCUIT BREAKER GP
CIRCUIT BREAKER GP
248-3288 CIRCUIT BREAKER GP
248-3288 CIRCUIT BREAKER GP -AUTOMATIC RESET
S/N 9861-UP
15-AMPERE
PART OF 367-4342 BATTERY & WIRING GP
ELECTRONICS GP-ENGINE
CONTROL & MTG GP-ENGINE ELEK
397-9345 CONTROL & MTG GP-ENGINE ELEK
397-9345 CONTROL & MTG GP-ENGINE ELEK
S/N TXY1-UP
AIR COOLED
PART OF 377-6189, 464-4684, 464-4685, 464-4686, 478-4677, 478-4681 ENGINE AR-COMPLETE
ELECTRONICS GP-MACHINE
417-3800 ELECTRONICS GP-MACHINE
417-3800 ELECTRONICS GP-MACHINE
S/N 9861-UP
PART OF 367-4420 ELECTRICAL AR
417-3801 ELECTRONICS GP-MACHINE
417-3801 ELECTRONICS GP-MACHINE
S/N 9861-UP
PART OF 457-8512, 469-9571 HYDRAULIC AR, 367-4820 HYDRAULIC AR-HIGH LIFT, 367-4830 HYDRAULIC AR-STANDARD LIFT
CONTROL GP-UNPROGRAMMED
CONTROL GP-UNPROGRAMMED
351-8490 CONTROL GP-UNPROGRAMMED
351-8490 CONTROL GP-UNPROGRAMMED -PRODUCT LINK 522
S/N 9861-UP
WITH SIM
PART OF 490-6099 INSTALLATION GP-COMMUNICATION
CONTROL GP-UNPROGRAMMED
372-4531 CONTROL GP-UNPROGRAMMED
372-4531 CONTROL GP-UNPROGRAMMED -PRODUCT LINK 522, CHINA
S/N 9861-UP
WITH SIM
PART OF 517-4757 INSTALLATION GP-COMMUNICATION
CONTROL GP-UNPRGMED MONITOR
308-3869 CONTROL GP-UNPRGMED MONITOR
308-3869 CONTROL GP-UNPRGMED MONITOR -MESSENGER
S/N 9861-UP
INDUSTRIAL
PART OF 483-3534 KIT-PAYLOAD CONTROL, 416-9361 MOUNTING GP-MONITOR
ELECTRICAL GP
367-4420 ELECTRICAL AR
367-4420 ELECTRICAL AR
S/N 9861-UP
PART OF 367-4400 COMMON AR
LIGHTING GP
LAMP GP-DOME
375-1478 LAMP GP-DOME
375-1478 LAMP GP-DOME -LED
S/N 9861-UP
24-VOLT. WITH SWITCH
FIELD REPLACEMENT FOR @@@@@ 3E-6389@@@@@
LAMP GP-DOME
3E-6389 LAMP GP-DOME
3E-6389 LAMP GP-DOME
S/N 9861-UP
24-VOLT. WITH SWITCH
PART OF 382-0483 WIRING GP-CAB
FIELD REPLACEMENT ORDER @@@@@375-1478@@@@@
LAMP GP-FLOOD
219-6485 LAMP GP-FLOOD
219-6485 LAMP GP-FLOOD
S/N 9861-UP
24-VOLT, 70-WATT
PART OF 373-5929 LIGHTING GP-FLOOD
LAMP GP-FLOOD
219-6487 LAMP GP-FLOOD
219-6487 LAMP GP-FLOOD
S/N 9861-UP
24-VOLT, 70-WATT
PART OF 373-0498, 373-5928, 373-5929, 486-8002 LIGHTING GP-FLOOD
LAMP GP-FLOOD
272-6641 LAMP GP-FLOOD
272-6641 LAMP GP-FLOOD
S/N 9861-UP
24-VOLT, 70-WATT
PART OF 486-8002 LIGHTING GP-FLOOD, 367-4392 LIGHTING GP-FLOOD & SIGNAL
LAMP GP-FLOOD
302-0406 LAMP GP-FLOOD
302-0406 LAMP GP-FLOOD -RH
S/N 9861-UP
24-VOLT
PART OF 367-4392 LIGHTING GP-FLOOD & SIGNAL
LAMP GP-FLOOD
302-0408 LAMP GP-FLOOD
302-0408 LAMP GP-FLOOD -LH
S/N 9861-UP
24-VOLT
PART OF 367-4392 LIGHTING GP-FLOOD & SIGNAL
LAMP GP-FLOOD
332-9402 LAMP GP-FLOOD
332-9402 LAMP GP-FLOOD -HID
S/N 9861-UP
24-VOLT, 35-WATT
PART OF 373-5930 LIGHTING GP-FLOOD
LAMP GP-FLOOD
347-9427 LAMP GP-FLOOD
347-9427 LAMP GP-FLOOD -HID
S/N 9861-UP
24-VOLT, 35-WATT
PART OF 373-5930 LIGHTING GP-FLOOD
LAMP GP-FLOOD
417-0977 LAMP GP-FLOOD
417-0977 LAMP GP-FLOOD
S/N 9861-UP
9-VOLT TO 34-VOLT
PART OF 479-5650 LIGHTING GP-FLOOD
LIGHTING GP-FLOOD
373-0498 LIGHTING GP-FLOOD
373-0498 LIGHTING GP-FLOOD
S/N 9861-UP
PART OF 373-5930 LIGHTING GP-FLOOD
LIGHTING GP-FLOOD
373-5928 LIGHTING GP-FLOOD
373-5928 LIGHTING GP-FLOOD
S/N 9861-UP
PART OF 373-5929 LIGHTING GP-FLOOD, 434-5171 OPTION AR-CAB
LIGHTING GP-FLOOD
373-5929 LIGHTING GP-FLOOD
373-5929 LIGHTING GP-FLOOD
S/N 9861-UP
PART OF 434-5172, 434-5173 OPTION AR-CAB
LIGHTING GP-FLOOD
373-5930 LIGHTING GP-FLOOD
373-5930 LIGHTING GP-FLOOD -CAB
S/N 9861-UP
PART OF 434-5174 OPTION AR-CAB
LIGHTING GP-FLOOD
479-5650 LIGHTING GP-FLOOD
479-5650 LIGHTING GP-FLOOD
S/N 9861-UP
LED, ROPS
LIGHTING GP-FLOOD
486-8002 LIGHTING GP-FLOOD
486-8002 LIGHTING GP-FLOOD
S/N 9861-UP
HALOGEN, ROPS
PART OF 525-3937, 525-3938, 525-3939, 525-3940 DISTRIBUTION AR
LIGHTING GP-FLOOD & SIGNAL
367-4392 LIGHTING GP-FLOOD & SIGNAL
367-4392 LIGHTING GP-FLOOD & SIGNAL
S/N 9861-UP
PART OF 367-4420 ELECTRICAL AR
LIGHTING GP-WARNING BEACON
376-4753 LIGHTING GP-WARNING BEACON
376-4753 LIGHTING GP-WARNING BEACON
S/N 9861-UP
PART OF 525-3939, 525-3940 DISTRIBUTION AR, 434-5172, 434-5173, 434-5174 OPTION AR-CAB
SENSOR GP
CONTROL GP-POSITION
176-5459 CONTROL GP-POSITION
176-5459 CONTROL GP-POSITION
S/N 9861-UP
PART OF 367-4355, 367-4365, 459-6722 KICKOUT & POSITIONER GP
MOUNTING GP-SENSOR
341-5801 MOUNTING GP-SENSOR
341-5801 MOUNTING GP-SENSOR -ATMOSPHERIC AIR, ENGINE OIL
S/N TXY1-UP
PART OF 377-6189, 464-4684, 464-4685, 464-4686, 478-4677, 478-4681 ENGINE AR-COMPLETE
SENSOR & MTG GP-POSITION
370-3263 SENSOR & MTG GP-POSITION
370-3263 SENSOR & MTG GP-POSITION
S/N 9861-UP
LIFT
PART OF 367-4355, 367-4365, 459-6722 KICKOUT & POSITIONER GP
SENSOR GP-ENGINE
352-2574 SENSOR GP-ENGINE
352-2574 SENSOR GP-ENGINE
S/N TXY1-3606
PART OF 445-8626 ENGINE AR-CORE
SENSOR GP-ENGINE
418-6531 SENSOR GP-ENGINE
418-6531 SENSOR GP-ENGINE
S/N TXY1-UP
PART OF 380-3111, 457-9188, 478-4667, 480-7250 ENGINE AR-CORE
SENSOR GP-POSITION
266-1466 SENSOR GP-POSITION
266-1466 SENSOR GP-POSITION -ROTARY
S/N 9861-UP
500 HERTZ, 72 DEGREE
PART OF 201-8616 PEDAL GP-GOVERNOR
SENSOR GP-POSITION
266-2337 SENSOR GP-POSITION
266-2337 SENSOR GP-POSITION
S/N 9861-UP
PART OF 370-3263 SENSOR & MTG GP-POSITION
SENSOR GP-PRESSURE
293-5535 SENSOR GP-PRESSURE
293-5535 SENSOR GP-PRESSURE
S/N TXY1-UP
PART OF 352-2574, 418-6531 SENSOR GP-ENGINE
SENSOR GP-PRESSURE
325-7472 SENSOR GP-PRESSURE
325-7472 SENSOR GP-PRESSURE
S/N TXY1-UP
PART OF 331-1135 SENSOR GP-PRESSURE
SENSOR GP-PRESSURE
325-8634 SENSOR GP-PRESSURE
325-8634 SENSOR GP-PRESSURE
S/N TXY1-UP
PART OF 343-8126 BASE GP-FUEL FILTER
SENSOR GP-PRESSURE
331-1134 SENSOR GP-PRESSURE
331-1134 SENSOR GP-PRESSURE
S/N TXY1-UP
ATMOSPHERIC
PART OF 352-2574, 418-6531 SENSOR GP-ENGINE
SENSOR GP-PRESSURE
331-1135 SENSOR GP-PRESSURE
331-1135 SENSOR GP-PRESSURE
S/N TXY1-UP
PART OF 352-2574, 418-6531 SENSOR GP-ENGINE
SENSOR GP-SPEED
300-9805 SENSOR GP-SPEED
300-9805 SENSOR GP-SPEED
S/N TXY1-UP
PART OF 352-2574, 418-6531 SENSOR GP-ENGINE
SENSOR GP-SPEED
300-9806 SENSOR GP-SPEED
300-9806 SENSOR GP-SPEED
S/N TXY1-UP
PART OF 352-2574, 418-6531 SENSOR GP-ENGINE
SENSOR GP-TEMPERATURE
234-5012 SENSOR GP-TEMPERATURE
234-5012 SENSOR GP-TEMPERATURE
S/N TXY1-UP
PART OF 352-2574, 418-6531 SENSOR GP-ENGINE
SENSOR GP-TEMPERATURE
234-5013 SENSOR GP-TEMPERATURE
234-5013 SENSOR GP-TEMPERATURE
S/N TXY1-UP
PART OF 343-8126 BASE GP-FUEL FILTER, 352-2574, 418-6531 SENSOR GP-ENGINE
STARTING AID GP
STARTING AID GP-ETHER
367-4424 STARTING AID GP-ETHER
367-4424 STARTING AID GP-ETHER
S/N 9861-UP
PART OF 367-4500 STARTING AR-COLD WEATHER
STARTING AR
367-4500 STARTING AR-COLD WEATHER
367-4500 STARTING AR-COLD WEATHER
S/N 9861-UP
PART OF 474-7068, 474-7069, 492-1250, 492-1260, 525-3939, 525-3940 DISTRIBUTION AR
STARTING MOTOR GP
PLATE AS-BRUSH
3T-9525 PLATE AS-BRUSH
3T-9525 PLATE AS-BRUSH
S/N 9861-UP
PART OF 338-3454 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
338-3454 STARTING MOTOR GP-ELECTRIC
338-3454 STARTING MOTOR GP-ELECTRIC
S/N 9861-UP
24-VOLT
PART OF 367-4504 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
367-4504 STARTING MOTOR GP-ELECTRIC
367-4504 STARTING MOTOR GP-ELECTRIC
S/N 9861-UP
PART OF 367-4440 INSTALLATION AR-ENGINE
SWITCH GP
SWITCH AS-TOGGLE
284-8381 SWITCH AS-TOGGLE
284-8381 SWITCH AS-TOGGLE
S/N TXY1-UP
PART OF 379-3844 FILTER GP-SECONDARY FUEL
SWITCH GP-DISCONNECT
7N-0719 SWITCH GP-DISCONNECT
7N-0719 SWITCH GP-DISCONNECT -BATTERY
S/N 9861-UP
PART OF 367-4342 BATTERY & WIRING GP
SWITCH GP-ENGINE BRAKE
459-4960 SWITCH GP-ENGINE BRAKE
459-4960 SWITCH GP-ENGINE BRAKE
S/N 9861-UP; TXY1-UP
PART OF 457-8510 ENGINE AR-COMPLETE, 479-8128 INSTALLATION AR-ENGINE
SWITCH GP-MAGNETIC
125-1302 SWITCH GP-MAGNETIC
125-1302 SWITCH GP-MAGNETIC
S/N 9861-UP
24-VOLT
PART OF 367-4342 BATTERY & WIRING GP
SWITCH GP-MAGNETIC
241-8368 SWITCH GP-MAGNETIC
241-8368 SWITCH GP-MAGNETIC
S/N 9861-UP
24-VOLT
PART OF 367-4342 BATTERY & WIRING GP
SWITCH GP-PRESSURE
440-0257 SWITCH GP-PRESSURE
440-0257 SWITCH GP-PRESSURE
S/N 9861-UP
DIFFERENTIAL
PART OF 346-5571 FILTER GP-OIL
SWITCH GP-QUICK COUPLER
460-1579 SWITCH GP-QUICK COUPLER
460-1579 SWITCH GP-QUICK COUPLER
S/N 9861-UP
PART OF 458-7960 CONTROL AR-QUICK COUPLER
SWITCH GP-RIDE CONTROL
252-5917 SWITCH GP-RIDE CONTROL
252-5917 SWITCH GP-RIDE CONTROL
S/N 9861-UP
PART OF 367-4613 CONTROL AR-RIDE
SWITCH GP-SIGNAL
253-3951 SWITCH GP-SIGNAL
253-3951 SWITCH GP-SIGNAL -TURN
S/N 9861-UP
PART OF 510-5423 CAB AR, 373-5887 CAB AR-ENCLOSED ROPS
SWITCH GP-WIPER
275-7741 SWITCH GP-WIPER
275-7741 SWITCH GP-WIPER -CAB
S/N 9861-UP
24-VOLT, INTERMITTENT
PART OF 382-0483 WIRING GP-CAB
WIRING GP
BATTERY & WIRING GP
367-4342 BATTERY & WIRING GP
367-4342 BATTERY & WIRING GP
S/N 9861-UP
PART OF 367-4420 ELECTRICAL AR
BATTERY & WIRING GP
367-4802 BATTERY & WIRING GP
367-4802 BATTERY & WIRING GP -COLD START
S/N 9861-UP
PART OF 367-4500 STARTING AR-COLD WEATHER
BLOCK GP-JUNCTION
188-6253 BLOCK GP-JUNCTION
188-6253 BLOCK GP-JUNCTION
S/N 9861-UP
PART OF 460-1574 HARNESS AS-CAB
BLOCK GP-JUNCTION
322-3305 BLOCK GP-JUNCTION
322-3305 BLOCK GP-JUNCTION -BATTERY
S/N 9861-UP
PART OF 367-4342 BATTERY & WIRING GP
CONNECTION GP-ELECTRICAL
126-7631 CONNECTION GP-ELECTRICAL
126-7631 CONNECTION GP-ELECTRICAL
S/N TXY1-UP
CYLINDER BLOCK GROUND
PART OF 377-6189, 464-4684, 464-4685, 464-4686, 478-4677, 478-4681 ENGINE AR-COMPLETE
COVER GP-WIRING HARNESS
490-6100 COVER GP-WIRING HARNESS
490-6100 COVER GP-WIRING HARNESS
S/N 9861-UP
WITHOUT PRODUCT LINK
MOUNTING GP-WIRING
344-8027 MOUNTING GP-WIRING
344-8027 MOUNTING GP-WIRING
S/N TXY2776-3612
PART OF 377-6189 ENGINE AR-COMPLETE
FOR USE WITH COOLANT TEMPERATURE JUMPER HARNESS
MOUNTING GP-WIRING
419-1768 MOUNTING GP-WIRING
419-1768 MOUNTING GP-WIRING
S/N TXY1-UP
WITHOUT SOUND PANELS
PART OF 464-4684, 464-4685, 464-4686, 478-4677, 478-4681 ENGINE AR-COMPLETE
PROTECTION GP-WIRING
418-2094 PROTECTION GP-WIRING
418-2094 PROTECTION GP-WIRING
S/N TXY1-UP
PART OF 464-4684, 464-4685, 464-4686, 478-4677, 478-4681 ENGINE AR-COMPLETE
CANNOT BE USED WITH OIL LEVEL SENSOR GROUP
WIRING GP-AUTOLUBE PUMP
367-4672 WIRING GP-AUTOLUBE PUMP
367-4672 WIRING GP-AUTOLUBE PUMP
S/N 9861-UP
PART OF 376-5925, 376-5930, 458-7955, 484-0096 LUBRICATION AR-AUTOMATIC
WIRING GP-AXLE TEMPERATURE
367-4352 WIRING GP-AXLE TEMPERATURE
367-4352 WIRING GP-AXLE TEMPERATURE
S/N 9861-UP
PART OF 367-4420 ELECTRICAL AR
WIRING GP-AXLE TEMPERATURE
367-4472 WIRING GP-AXLE TEMPERATURE
367-4472 WIRING GP-AXLE TEMPERATURE
S/N 9861-UP
PART OF 367-4703, 484-0085 COOLER AR-AXLE OIL
WIRING GP-CAB
382-0483 WIRING GP-CAB
382-0483 WIRING GP-CAB
S/N 9861-UP
PART OF 510-5423 CAB AR, 373-5887 CAB AR-ENCLOSED ROPS
WIRING GP-CHASSIS
367-4702 WIRING GP-CHASSIS
367-4702 WIRING GP-CHASSIS
S/N 9861-UP
PART OF 367-4410 COOLING AR
WIRING GP-ELECTROHYDRAULIC
373-5944 WIRING GP-ELECTROHYDRAULIC
373-5944 WIRING GP-ELECTROHYDRAULIC
S/N 9861-UP
PART OF 371-4480, 371-4481 CONTROL & MTG GP-ELHYD
WIRING GP-ELECTROHYDRAULIC
375-5759 WIRING GP-ELECTROHYDRAULIC
375-5759 WIRING GP-ELECTROHYDRAULIC
S/N 9861-UP
PART OF 373-5883 CONTROL & MTG GP-ELHYD
WIRING GP-ELECTRONIC CONTROL
351-9117 WIRING GP-ELECTRONIC CONTROL
351-9117 WIRING GP-ELECTRONIC CONTROL
S/N TXY1-UP
PART OF 377-6189 ENGINE AR-COMPLETE
WIRING GP-ELECTRONIC CONTROL
443-7733 WIRING GP-ELECTRONIC CONTROL
443-7733 WIRING GP-ELECTRONIC CONTROL
S/N TXY1-UP
PART OF 464-4684, 464-4685, 464-4686, 478-4677 ENGINE AR-COMPLETE
Type 1
WIRING GP-ELECTRONIC CONTROL
443-7733 WIRING GP-ELECTRONIC CONTROL
443-7733 WIRING GP-ELECTRONIC CONTROL
S/N TXY1-UP
PART OF 464-4684, 464-4685, 464-4686, 478-4677, 478-4681 ENGINE AR-COMPLETE
Type 2
WIRING GP-ENGINE
458-3072 WIRING GP-ENGINE
458-3072 WIRING GP-ENGINE
S/N 9861-UP
PART OF 367-4420 ELECTRICAL AR
WIRING GP-FRONT
367-4322 WIRING GP-FRONT
367-4322 WIRING GP-FRONT
S/N 9861-UP
PART OF 367-4420 ELECTRICAL AR
WIRING GP-FRONT
367-4652 WIRING GP-FRONT
367-4652 WIRING GP-FRONT
S/N 9861-UP
PART OF 457-8512, 469-9571 HYDRAULIC AR, 367-4820 HYDRAULIC AR-HIGH LIFT, 367-4830 HYDRAULIC AR-STANDARD LIFT
WIRING GP-HYDRAULIC TANK
367-4832 WIRING GP-HYDRAULIC TANK
367-4832 WIRING GP-HYDRAULIC TANK
S/N 9861-UP
PART OF 367-4420 ELECTRICAL AR
WIRING GP-KICKOUT & POSITIONER
367-4682 WIRING GP-KICKOUT & POSITIONER
367-4682 WIRING GP-KICKOUT & POSITIONER -TILT KICKOUT
S/N 9861-UP
PART OF 457-8511, 457-8512, 469-9571, 469-9763 HYDRAULIC AR, 367-4820, 367-4840 HYDRAULIC AR-HIGH LIFT, 367-4830, 367-4850 HYDRAULIC AR-STANDARD LIFT
WIRING GP-MACHINE
367-4332 WIRING GP-MACHINE
367-4332 WIRING GP-MACHINE
S/N 9861-UP
PART OF 367-4420 ELECTRICAL AR
WIRING GP-MONITOR
315-3591 WIRING GP-MONITOR
315-3591 WIRING GP-MONITOR
S/N 9861-UP
PART OF 483-3534 KIT-PAYLOAD CONTROL
WIRING GP-SECONDARY STEERING
367-4722 WIRING GP-SECONDARY STEERING
367-4722 WIRING GP-SECONDARY STEERING
S/N 9861-UP
PART OF 367-4583 STEERING AR-SECONDARY
WIRING GP-SENSOR
378-8329 WIRING GP-SENSOR
378-8329 WIRING GP-SENSOR
S/N TXY1-UP
PART OF 377-6189, 464-4684, 464-4685, 464-4686, 478-4677, 478-4681 ENGINE AR-COMPLETE
FOR USE WITH TWO POSITION MANUAL FUEL PRIMING SWITCH, AUTO FUEL PRIMING, AND A COOLANT REGULATOR WHICH DOES NOT PROVIDE BOSSES, SPECIFICALLY FOR HARNESS MOUNTING.
CANNOT BE USED WITH THREE POSITION MANUAL FUEL PRIMING SWITCH, NEW DESIGN COOLANT REGULATOR WHICH DOES PROVIDE HARNESS
WIRING GP-UNIT INJECTOR
334-5837 WIRING GP-UNIT INJECTOR
334-5837 WIRING GP-UNIT INJECTOR
S/N TXY1-UP
NON BRAKE
PART OF 377-6189, 464-4684, 464-4685, 478-4677 ENGINE AR-COMPLETE
FOR USE WITH ENGINES WITH MEUI-A INJECTORS
WIRING GP-UNIT INJECTOR
354-4751 WIRING GP-UNIT INJECTOR
354-4751 WIRING GP-UNIT INJECTOR
S/N TXY1-UP
PART OF 464-4686, 478-4681 ENGINE AR-COMPLETE
CONNECTION GP
CONNECTION GP-ELECTRICAL
126-7631 CONNECTION GP-ELECTRICAL
126-7631 CONNECTION GP-ELECTRICAL
S/N TXY1-UP
CYLINDER BLOCK GROUND
PART OF 377-6189, 464-4684, 464-4685, 464-4686, 478-4677, 478-4681 ENGINE AR-COMPLETE
ELECTRONICS GP-MONITOR
417-4071 ELECTRONICS GP-MONITOR
417-4071 ELECTRONICS GP-MONITOR
S/N 9861-UP
PART OF 367-4420 ELECTRICAL AR
CONTROL GP-UNPRGMED MONITOR
308-3869 CONTROL GP-UNPRGMED MONITOR
308-3869 CONTROL GP-UNPRGMED MONITOR -MESSENGER
S/N 9861-UP
INDUSTRIAL
PART OF 483-3534 KIT-PAYLOAD CONTROL, 416-9361 MOUNTING GP-MONITOR
483-3534 KIT-PAYLOAD CONTROL
483-3534 KIT-PAYLOAD CONTROL
S/N 9861-UP
CUSTOM
MODULE GP-DISPLAY
482-0985 MODULE GP-DISPLAY
482-0985 MODULE GP-DISPLAY
S/N 9861-UP
PART OF 376-5925, 376-5930, 458-7955, 484-0096 LUBRICATION AR-AUTOMATIC
HEATER GP
HEATER GP-FUEL
376-6015 HEATER GP-FUEL
376-6015 HEATER GP-FUEL
S/N 9861-UP
PART OF 367-4500 STARTING AR-COLD WEATHER
HEATER GP-JACKET WATER
190-3132 HEATER GP-JACKET WATER
190-3132 HEATER GP-JACKET WATER
S/N 9861-UP
240-VOLT, 1500-WATT
HEATER GP-JACKET WATER
248-7661 HEATER GP-JACKET WATER
248-7661 HEATER GP-JACKET WATER
S/N 9861-UP
120-VOLT
ELECTRONICS GP-COMMUNICATION
262-1421 ELECTRONICS GP-COMMUNICATION
262-1421 ELECTRONICS GP-COMMUNICATION -PRODUCT LINK 300
S/N 9861-UP
PART OF 377-3277 INSTALLATION GP-COMMUNICATION
373-8292 ELECTRONICS GP-COMMUNICATION
373-8292 ELECTRONICS GP-COMMUNICATION -PRODUCT LINK 522
S/N 9861-UP
PART OF 490-6099 INSTALLATION GP-COMMUNICATION
373-8293 ELECTRONICS GP-COMMUNICATION
373-8293 ELECTRONICS GP-COMMUNICATION -PRODUCT LINK 522, CHINA
S/N 9861-UP
PART OF 517-4757 INSTALLATION GP-COMMUNICATION
INSTALLATION GP-COMMUNICATION
377-3277 INSTALLATION GP-COMMUNICATION
377-3277 INSTALLATION GP-COMMUNICATION
S/N 9861-UP
PART OF 382-0492 INSTALLATION GP-COMMUNICATION
382-0492 INSTALLATION GP-COMMUNICATION
382-0492 INSTALLATION GP-COMMUNICATION
S/N 9861-UP
PART OF 510-5423 CAB AR, 373-5887 CAB AR-ENCLOSED ROPS
490-6099 INSTALLATION GP-COMMUNICATION
490-6099 INSTALLATION GP-COMMUNICATION -PRODUCT LINK 522
S/N 9861-UP
517-4757 INSTALLATION GP-COMMUNICATION
517-4757 INSTALLATION GP-COMMUNICATION -PRODUCT LINK 522, CHINA
S/N 9861-UP
BLOCK GP-JUNCTION
BLOCK GP-JUNCTION
188-6253 BLOCK GP-JUNCTION
188-6253 BLOCK GP-JUNCTION
S/N 9861-UP
PART OF 460-1574 HARNESS AS-CAB
BLOCK GP-JUNCTION
322-3305 BLOCK GP-JUNCTION
322-3305 BLOCK GP-JUNCTION -BATTERY
S/N 9861-UP
PART OF 367-4342 BATTERY & WIRING GP
CAMERA GP
367-4762 CAMERA AR
367-4762 CAMERA AR
S/N 9861-UP
PART OF 525-3939, 525-3940 DISTRIBUTION AR, 434-5172, 434-5173, 434-5174 OPTION AR-CAB
CAMERA GP
367-4772 CAMERA GP
367-4772 CAMERA GP
S/N 9861-UP
PART OF 367-4762 CAMERA AR
DISPLAY GP-CAMERA
483-3827 DISPLAY GP-CAMERA
483-3827 DISPLAY GP-CAMERA
S/N 9861-UP
24-VOLT. WORK AREA VISUAL SYSTEM
PART OF 486-8000 DISPLAY GP-CAMERA
DISPLAY GP-CAMERA
486-8000 DISPLAY GP-CAMERA
486-8000 DISPLAY GP-CAMERA
S/N 9861-UP
PART OF 367-4762 CAMERA AR
HARNESS GP
460-1574 HARNESS AS-CAB
460-1574 HARNESS AS-CAB
S/N 9861-UP
MAIN CAB
PART OF 382-0483 WIRING GP-CAB
460-1577 HARNESS AS-CAB
460-1577 HARNESS AS-CAB
S/N 9861-UP
PART OF 483-3534 KIT-PAYLOAD CONTROL
517-4756 HARNESS AS-CAB
517-4756 HARNESS AS-CAB
S/N 9861-UP
PART OF 382-0483 WIRING GP-CAB
317-5591 HARNESS AS-CHASSIS
317-5591 HARNESS AS-CHASSIS
S/N 9861-UP
PART OF 483-3534 KIT-PAYLOAD CONTROL
367-4482 HARNESS AS-CHASSIS
367-4482 HARNESS AS-CHASSIS
S/N 9861-UP
PART OF 367-4832 WIRING GP-HYDRAULIC TANK
458-3067 HARNESS AS-CHASSIS
458-3067 HARNESS AS-CHASSIS
S/N 9861-UP
PART OF 367-4332 WIRING GP-MACHINE
276-0031 HARNESS AS-CONTROL
276-0031 HARNESS AS-CONTROL
S/N 9861-UP
PART OF 377-3277 INSTALLATION GP-COMMUNICATION
382-0489 HARNESS AS-CONTROL
382-0489 HARNESS AS-CONTROL
S/N 9861-UP
PART OF 382-0488 CONTROL GP-ELECTROHYDRAULIC
HARNESS AS-ENGINE
367-5116 HARNESS AS-ENGINE
367-5116 HARNESS AS-ENGINE
S/N TXY1-UP
PART OF 351-9117 WIRING GP-ELECTRONIC CONTROL
416-6539 HARNESS AS-ENGINE
416-6539 HARNESS AS-ENGINE
S/N TXY1-UP
PART OF 443-7733 WIRING GP-ELECTRONIC CONTROL
418-2088 HARNESS AS-ENGINE
418-2088 HARNESS AS-ENGINE
S/N TXY1-UP
PART OF 514-5311 HARNESS AS-ENGINE
418-2093 HARNESS AS-ENGINE
418-2093 HARNESS AS-ENGINE
S/N TXY1-UP
PART OF 514-5313 HARNESS AS-ENGINE
458-3068 HARNESS AS-ENGINE
458-3068 HARNESS AS-ENGINE
S/N 9861-UP
PART OF 458-3072 WIRING GP-ENGINE
508-8579 HARNESS AS-ENGINE
508-8579 HARNESS AS-ENGINE
S/N TXY1-UP
PART OF 443-7733 WIRING GP-ELECTRONIC CONTROL
HARNESS AS-ENGINE
514-5311 HARNESS AS-ENGINE
514-5311 HARNESS AS-ENGINE
S/N TXY1-UP
PART OF 354-4751 WIRING GP-UNIT INJECTOR
HARNESS AS-ENGINE
514-5313 HARNESS AS-ENGINE
514-5313 HARNESS AS-ENGINE
S/N TXY1-UP
PART OF 334-5837 WIRING GP-UNIT INJECTOR
458-3065 HARNESS AS-FRONT CHASSIS
458-3065 HARNESS AS-FRONT CHASSIS
S/N 9861-UP
PART OF 367-4322 WIRING GP-FRONT
458-3066 HARNESS AS-HITCH
458-3066 HARNESS AS-HITCH
S/N 9861-UP
PART OF 367-4322 WIRING GP-FRONT
468-0873 HARNESS AS-HITCH
468-0873 HARNESS AS-HITCH
S/N 9861-UP
PART OF 483-3534 KIT-PAYLOAD CONTROL
235-5506 HARNESS AS-LIGHTING
235-5506 HARNESS AS-LIGHTING
S/N 9861-UP
PART OF 373-5928 LIGHTING GP-FLOOD, 382-0483 WIRING GP-CAB
280-1436 HARNESS AS-LIGHTING
280-1436 HARNESS AS-LIGHTING
S/N 9861-UP
PART OF 373-5929 LIGHTING GP-FLOOD, 382-0483 WIRING GP-CAB
280-1437 HARNESS AS-LIGHTING
280-1437 HARNESS AS-LIGHTING
S/N 9861-UP
PART OF 373-5929 LIGHTING GP-FLOOD, 382-0483 WIRING GP-CAB
449-3163 HARNESS AS-LIGHTING
449-3163 HARNESS AS-LIGHTING
S/N 9861-UP
PART OF 367-4392 LIGHTING GP-FLOOD & SIGNAL
457-6143 HARNESS AS-LIGHTING
457-6143 HARNESS AS-LIGHTING
S/N 9861-UP
PART OF 367-4702 WIRING GP-CHASSIS
263-2166 HARNESS AS-MONITOR
263-2166 HARNESS AS-MONITOR
S/N 9861-UP
PART OF 382-0483 WIRING GP-CAB
468-0875 HARNESS AS-MONITOR
468-0875 HARNESS AS-MONITOR
S/N 9861-UP
PART OF 483-3534 KIT-PAYLOAD CONTROL
373-5943 HARNESS AS-OPERATOR CONTROLS
373-5943 HARNESS AS-OPERATOR CONTROLS
S/N 9861-UP
PART OF 373-5944 WIRING GP-ELECTROHYDRAULIC
367-4582 HARNESS AS-POWER
367-4582 HARNESS AS-POWER
S/N 9861-UP
PART OF 367-4342 BATTERY & WIRING GP
200-5728 HARNESS AS-RADIO
200-5728 HARNESS AS-RADIO
S/N 9861-UP
4-FLANGE
PART OF 241-4941, 248-4152 RADIO GP
236-7772 HARNESS AS-RADIO
236-7772 HARNESS AS-RADIO
S/N 9861-UP
PART OF 373-5888 INSTALLATION GP-RADIO
338-9029 HARNESS AS-SENSOR
338-9029 HARNESS AS-SENSOR
S/N TXY1-UP
PART OF 378-8329 WIRING GP-SENSOR
367-4742 HARNESS AS-SENSOR
367-4742 HARNESS AS-SENSOR
S/N 9861-UP
REAR AXLE OIL TEMPERATURE
PART OF 367-4352 WIRING GP-AXLE TEMPERATURE
367-4442 HARNESS AS-SOLENOID
367-4442 HARNESS AS-SOLENOID
S/N 9861-UP
TILT KICKOUT
PART OF 367-4682 WIRING GP-KICKOUT & POSITIONER
468-0874 HARNESS AS-SOLENOID
468-0874 HARNESS AS-SOLENOID
S/N 9861-UP
PART OF 483-3534 KIT-PAYLOAD CONTROL
373-0497 HARNESS AS-SWITCH
373-0497 HARNESS AS-SWITCH
S/N 9861-UP
PART OF 375-5759 WIRING GP-ELECTROHYDRAULIC
458-3069 HARNESS AS-SWITCH
458-3069 HARNESS AS-SWITCH
S/N 9861-UP
PART OF 458-3072 WIRING GP-ENGINE
372-7861 HARNESS AS-TRANSMISSION
372-7861 HARNESS AS-TRANSMISSION
S/N PPW1-UP
PART OF 366-9916 CONTROL GP-TRANSMISSION HYD
415-1478 HARNESS AS-VALVE
415-1478 HARNESS AS-VALVE
S/N 9861-UP
POWERSHIFT
PART OF 367-4322 WIRING GP-FRONT
430-8807 HARNESS AS-VALVE
430-8807 HARNESS AS-VALVE
S/N 9861-UP
PART OF 416-4796 VALVE & MTG GP-COUPLER
260-9602 HARNESS AS-WIRING
260-9602 HARNESS AS-WIRING -SERVICE TOOL
S/N 9861-UP
PART OF 382-0483 WIRING GP-CAB
381-9619 HARNESS AS-WIRING
381-9619 HARNESS AS-WIRING
S/N TXY1-UP
PART OF 378-8329 WIRING GP-SENSOR
433-5754 HARNESS AS-WIRING
433-5754 HARNESS AS-WIRING -SEAT SUSPENSION
S/N 9861-UP
PART OF 366-5830 SUSPENSION GP-SEAT

Information:

(For parts list, see above)

Troubleshooting
Alarm - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Alarm - Test
986H Wheel Loader
Engine News
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
986H Wheel Loader
Special Instruction
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Specifications
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator Mounting
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator Mounting
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator Mounting
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator Mounting
C15 and C18 Engines for Caterpillar Built Machines
Alternator Mounting
C15 and C18 Engines for Caterpillar Built Machines
Alternator Mounting
C15 and C18 Engines for Caterpillar Built Machines
Alternator Mounting
C15 and C18 Engines for Caterpillar Built Machines
Testing and Adjusting
Charging System - Test
C15 and C18 Engines for Caterpillar Built Machines
Troubleshooting
MID 161 - CID 0168 - FMI 00
Product Link - PL522/523
MID 161 - CID 0168 - FMI 01
Product Link - PL522/523
MID 161 - CID 1251 - FMI 03
Product Link - PL522/523
Charging System - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Alternator Problem
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Alternator - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Alternator - Remove and Install
986H Wheel Loader Engine Supplement
Service Magazine
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Operation and Maintenance Manual
Battery or Battery Cable - Inspect/Replace
986H Wheel Loader
Battery - Recycle
986H Wheel Loader
Battery - Clean
986H Wheel Loader
Battery Hold-Down - Tighten
986H Wheel Loader
Tool Operating Manual
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Testing and Adjusting
Battery - Test
C15 and C18 Engines for Caterpillar Built Machines
Troubleshooting
Electrical Power Supply - Test
C15 and C18 Engines for Caterpillar Built Machines
MID 161 - CID 0168 - FMI 00
Product Link - PL522/523
MID 161 - CID 0168 - FMI 01
Product Link - PL522/523
MID 161 - CID 1251 - FMI 03
Product Link - PL522/523
Electrical Power Supply - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Charging System - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Electrical Power Supply - Test
986H Wheel Loader
Battery Problem
C15 and C18 Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Circuit Breakers - Reset
986H Wheel Loader
Autoshift Control
986H Wheel Loader
Specifications
Transmission Hydraulic Control
986H Wheel Loader Machine Systems
Systems Operation
Transmission Hydraulic Control
986H Wheel Loader Machine Systems
Service Magazine
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Engine News
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Operation and Maintenance Manual
Welding on Machines and Engines with Electronic Controls
986H Wheel Loader
Special Instruction
Instructions for Communicating With and Flashing the <NOBR>10R-4085</NOBR> Engine Electronic Control Gp and the <NOBR>10R-1824</NOBR> Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Troubleshooting
System Overview
C15 and C18 Engines for Caterpillar Built Machines
ECM - Replace
C15 and C18 Engines for Caterpillar Built Machines
Engine Monitoring System
C15 and C18 Engines for Caterpillar Built Machines
Programmable Parameters
C15 and C18 Engines for Caterpillar Built Machines
Factory Passwords
C15 and C18 Engines for Caterpillar Built Machines
Configuration Parameters
C15 and C18 Engines for Caterpillar Built Machines
Symptom Troubleshooting
C15 and C18 Engines for Caterpillar Built Machines
ECM Will Not Accept Factory Passwords
C15 and C18 Engines for Caterpillar Built Machines
Diagnostic Trouble Codes
C15 and C18 Engines for Caterpillar Built Machines
Event Codes
C15 and C18 Engines for Caterpillar Built Machines
Engine Stalls at Low RPM
C15 and C18 Engines for Caterpillar Built Machines
Engine Shutdown Occurs Intermittently
C15 and C18 Engines for Caterpillar Built Machines
Customer Passwords
C15 and C18 Engines for Caterpillar Built Machines
Timing - Calibrate
C15 and C18 Engines for Caterpillar Built Machines
ECM Software - Install
C15 and C18 Engines for Caterpillar Built Machines
Diagnostic Capabilities
C15 and C18 Engines for Caterpillar Built Machines
ECM Does Not Communicate with Other Modules
C15 and C18 Engines for Caterpillar Built Machines
CAN Data Link - Test
C15 and C18 Engines for Caterpillar Built Machines
Shutdown - Test
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Electronic Control Module - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Operation and Maintenance Manual
Welding on Machines and Engines with Electronic Controls
986H Wheel Loader
Service Brake Control
986H Wheel Loader
Autoshift Control
986H Wheel Loader
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Testing and Adjusting
Ride Control Activation Speed (Electronic Technician) - Adjust
986H Wheel Loader Machine Systems
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Operation and Maintenance Manual
Welding on Machines and Engines with Electronic Controls
986H Wheel Loader
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Testing and Adjusting
Glossary of Terms
986H Wheel Loader Machine Systems
Disassembly and Assembly
Lift Position Control - Remove and Install
986H Wheel Loader Machine Systems
Tilt Position Control - Remove and Install
986H Wheel Loader Machine Systems
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Operation and Maintenance Manual
Welding on Machines and Engines with Electronic Controls
986H Wheel Loader
Special Instruction
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Payload Control System (PCS) Software May Not Support Certain 986H Wheel Loaders {1439, 7490, 7494, 7610, 7620}
Payload Control System (PCS) Software May Not Support Certain 986H Wheel Loaders {1439, 7490, 7494, 7610, 7620}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Asia
Systems Operation
Parking Brake
986H Wheel Loader Machine Systems
Electronic Control (Brake, Hydraulic Fan System)
986H Wheel Loader Machine Systems
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
Troubleshooting
ECM - Replace
986H Wheel Loader
ECM - Configure
986H Wheel Loader
ECM Software - Install
986H Wheel Loader
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Specifications
Transmission Hydraulic Control
986H Wheel Loader Machine Systems
Systems Operation
Transmission Hydraulic Control
986H Wheel Loader Machine Systems
Electronic Control (Power Train System)
986H Wheel Loader Machine Systems
Electronic Control (Hydraulic System)
986H Wheel Loader Machine Systems
Electronic Control (Brake, Hydraulic Fan System)
986H Wheel Loader Machine Systems
Special Instruction
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat<SUP>&reg;</SUP> Products {1408}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Systems Operation
Electronic Control (Power Train System)
986H Wheel Loader Machine Systems
Electronic Control (Hydraulic System)
986H Wheel Loader Machine Systems
Electronic Control (Brake, Hydraulic Fan System)
986H Wheel Loader Machine Systems
Service Magazine
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
Event Identification Number (EID) Above 60000 is Now Used on All Cat<SUP>&reg;</SUP> Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Operation and Maintenance Manual
High Intensity Discharge Lamp (HID) - Replace - If Equipped
986H Wheel Loader
Troubleshooting
Engine Cranks but Does Not Start
C15 and C18 Engines for Caterpillar Built Machines
Engine Does Not Crank
C15 and C18 Engines for Caterpillar Built Machines
Special Instruction
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Payload Control System (PCS) Software May Not Support Certain 986H Wheel Loaders {1439, 7490, 7494, 7610, 7620}
Payload Control System (PCS) Software May Not Support Certain 986H Wheel Loaders {1439, 7490, 7494, 7610, 7620}
Specifications
Engine Oil Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines
Inlet Air Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines
Coolant Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines
Inlet Manifold Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines
Inlet Manifold Air Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines
Speed/Timing Sensor
C15 and C18 Engines for Caterpillar Built Machines
Atmospheric Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines
Atmospheric Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines
Coolant Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines
Inlet Manifold Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines
Inlet Manifold Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines
Inlet Manifold Air Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines
Atmospheric Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines
Speed/Timing Sensor
C15 and C18 Engines for Caterpillar Built Machines
Coolant Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines
Inlet Air Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines
Coolant Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines
Position Sensor (Throttle)
986H Wheel Loader Machine Systems
Speed/Timing Sensor
C15 and C18 Engines for Caterpillar Built Machines
Boost Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines
Atmospheric Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines
Speed/Timing Sensor
C15 and C18 Engines for Caterpillar Built Machines
Speed/Timing Sensor
C15 and C18 Engines for Caterpillar Built Machines
Inlet Manifold Temperature Sensor - Charge Air Cooler Outlet
C15 and C18 Engines for Caterpillar Built Machines
Speed/Timing Sensor
C15 and C18 Engines for Caterpillar Built Machines
Boost Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines
Inlet Manifold Air Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines
Temperature Sensor (Torque Converter Oil) (Transmission Oil)
986H Wheel Loader Machine Systems
Speed Sensor (Transmission Output)
986H Wheel Loader Machine Systems
Speed/Timing Sensor
C15 and C18 Engines for Caterpillar Built Machines
Speed/Timing Sensor
C15 and C18 Engines for Caterpillar Built Machines
Speed/Timing Sensor
C15 and C18 Engines for Caterpillar Built Machines
Fuel Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines
Speed/Timing Sensor
C15 and C18 Engines for Caterpillar Built Machines
Inlet Air Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines
Boost Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines
Inlet Manifold Air Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines
Inlet Manifold Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines
Speed/Timing Sensor
C15 and C18 Engines for Caterpillar Built Machines
Pressure Sensor - Demand Fan
986H Wheel Loader Machine Systems
Inlet Manifold Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines
Position Sensor (Lift Linkage, Tilt Linkage)
986H Wheel Loader Machine Systems
Inlet Manifold Air Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines
Temperature Sensor (Axle Oil) (Transmission Sump Oil)
986H Wheel Loader Machine Systems
Transmission Hydraulic Control
986H Wheel Loader Machine Systems
Inlet Manifold Air Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines
Pressure Sensor - LIFT CYLINDER ROD END
986H Wheel Loader Machine Systems
Inlet Manifold Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines
Lift Position Sensor and Mounting
986H Wheel Loader Machine Systems
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Transmission Hydraulic Control
986H Wheel Loader Machine Systems
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Testing and Adjusting
Position Sensor (Lift Linkage) - Replace
986H Wheel Loader Machine Systems
Position Sensor (Tilt Linkage) - Replace
986H Wheel Loader Machine Systems
Calibrations (Cat ET)
986H Wheel Loader Machine Systems
Troubleshooting
Speed/Timing - Test
C15 and C18 Engines for Caterpillar Built Machines
Sensor Signal (Analog, Active) - Test
C15 and C18 Engines for Caterpillar Built Machines
Sensor Signal (Analog, Passive) - Test
C15 and C18 Engines for Caterpillar Built Machines
Sensor Signal (Analog, Passive) - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Sensor Supply - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Speed Sensor - Test
986H Wheel Loader
Sensor Signal (Analog, Passive) - Test
986H Wheel Loader
Sensor Signal (PWM) - Test
986H Wheel Loader
Sensor Supply - Test
986H Wheel Loader
Timing - Calibrate
C15 and C18 Engines for Caterpillar Built Machines
Sensor Supply - Test
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Coolant Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pressure Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Atmospheric Pressure Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Position Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Camshaft Position Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Inlet Air Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Fuel Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Turbocharger Outlet Pressure Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Specifications
Solenoid Valve (Pilot Proportioning)
986H Wheel Loader Machine Systems
Exhaust Gas Valve (NRS)
C15 and C18 Engines for Caterpillar Built Machines
Exhaust Gas Valve (NRS)
C15 and C18 Engines for Caterpillar Built Machines
Troubleshooting
Injector Solenoid - Test
C15 and C18 Engines for Caterpillar Built Machines
Cooling Fan Control - Test
C15 and C18 Engines for Caterpillar Built Machines
Cooling Fan Reversing - Test
C15 and C18 Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Ether Starting Aid Cylinder - Replace - If Equipped
986H Wheel Loader
Starting Motor - Inspect
986H Wheel Loader
Special Instruction
Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
986H Wheel Loader Machine Systems
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Testing and Adjusting
Electric Starting System - Test
C15 and C18 Engines for Caterpillar Built Machines
Pinion Clearance - Adjust
C15 and C18 Engines for Caterpillar Built Machines
Troubleshooting
Starting System - Test
986H Wheel Loader
Disassembly and Assembly
Electric Starting Motor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor - Remove and Install
986H Wheel Loader Engine Supplement
Operation and Maintenance Manual
Battery Disconnect Switch
986H Wheel Loader
Special Instruction
Repair/Replacement Procedure for <NOBR> 5C-6108</NOBR> Refueling Switch {1295}
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}
Specifications
Fuel Filter Pressure Differential Switch
C15 and C18 Engines for Caterpillar Built Machines
Fuel Filter Pressure Differential Switch
C15 and C18 Engines for Caterpillar Built Machines
Oil Filter (Power Train)
986H Wheel Loader Machine Systems
Pressure Switch (Primary Steering Oil)
986H Wheel Loader Machine Systems
Systems Operation
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines
Service Brakes
986H Wheel Loader Machine Systems
Testing and Adjusting
Limit Switch (Stop Light) - Adjust
986H Wheel Loader Machine Systems
Troubleshooting
Switch Circuits - Test
C15 and C18 Engines for Caterpillar Built Machines
Speed Control - Test
C15 and C18 Engines for Caterpillar Built Machines
Operator Control Switch (Switch to Ground) - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Condition Switch (Two Wire) - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Operator Control Switch (Switch to Battery) - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Relay - Test
986H Wheel Loader
Operator Control Switch (Switch to Ground) - Test
986H Wheel Loader
Condition Switch (Switch to Ground) - Test
986H Wheel Loader
Operator Control Switch (Switch to Battery) - Test
986H Wheel Loader
Shutdown - Test
C15 and C18 Engines for Caterpillar Built Machines
Cooling Fan Control - Test
C15 and C18 Engines for Caterpillar Built Machines
Tool Operating Manual
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
Service Tools
Product Link - PL522/523
Service Tools
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Service Tools
986H Wheel Loader
Electronic Service Tools
C15 and C18 Engines for Caterpillar Built Machines
Factory Passwords
C15 and C18 Engines for Caterpillar Built Machines
ECM Will Not Accept Factory Passwords
C15 and C18 Engines for Caterpillar Built Machines
Customer Passwords
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Specifications
Exhaust Gas Valve (NRS)
C15 and C18 Engines for Caterpillar Built Machines
Exhaust Gas Valve (NRS)
C15 and C18 Engines for Caterpillar Built Machines
Modulating Valve (Torque Converter Lockup Clutch)
986H Wheel Loader Machine Systems
Modulating Valve (Transmission Hydraulic Control)
986H Wheel Loader Machine Systems
Modulating Valve (Transmission Hydraulic Control)
986H Wheel Loader Machine Systems
Solenoid Valve
986H Wheel Loader Machine Systems
Systems Operation
Modulating Valve (Torque Converter Lockup Clutch)
986H Wheel Loader Machine Systems
Operation and Maintenance Manual
Backup Alarm - Test
986H Wheel Loader
Backup Alarm
986H Wheel Loader
Troubleshooting
Alarm - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Alarm - Test
986H Wheel Loader
Operation and Maintenance Manual
Battery or Battery Cable - Inspect/Replace
986H Wheel Loader
Fuses - Replace
986H Wheel Loader
Battery Disconnect Switch
986H Wheel Loader
Circuit Breakers - Reset
986H Wheel Loader
Autoshift Control
986H Wheel Loader
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>&reg;</SUP> Products {5063, 5705, 5734}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Specifications
Electrical Ground Stud
C15 and C18 Engines for Caterpillar Built Machines
Solenoid Valve (Hydraulic Fan)
986H Wheel Loader Machine Systems
Temperature Sensor (Torque Converter Oil) (Transmission Oil)
986H Wheel Loader Machine Systems
Speed Sensor (Transmission Output)
986H Wheel Loader Machine Systems
Temperature Sensor (Axle Oil) (Transmission Sump Oil)
986H Wheel Loader Machine Systems
Transmission Hydraulic Control
986H Wheel Loader Machine Systems
Wiring (Cab)
986H Wheel Loader Machine Systems
Pressure Switch (Primary Steering Oil)
986H Wheel Loader Machine Systems
Electronic Control Wiring Group
C15 and C18 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines
Parking Brake
986H Wheel Loader Machine Systems
Transmission Hydraulic Control
986H Wheel Loader Machine Systems
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
C15 and C18 Engines for Caterpillar Built Machines
Electrical Connector - Inspect
Product Link - PL522/523
Wiring Harness (Open Circuit) - Test
Product Link - PL522/523
Wiring Harness (Short Circuit) - Test
Product Link - PL522/523
Limit Switch (Stop Light) - Adjust
986H Wheel Loader Machine Systems
Troubleshooting
Wiring Information
C15 and C18 Engines for Caterpillar Built Machines
Connector Locations
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Electrical Connector - Inspect
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Cat Data Link - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
CAN Data Link - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Wiring Harness (Open Circuit) - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Wiring Harness (Short Circuit) - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
System Schematic
986H Wheel Loader
Connector Locations
986H Wheel Loader
Connector Contact Description
986H Wheel Loader
CAN Data Link - Test
986H Wheel Loader
Cat Data Link - Test
986H Wheel Loader
Wiring Harness (Open Circuit) - Test
986H Wheel Loader
Wiring Harness (Short Circuit) - Test
986H Wheel Loader
Electrical Connectors
C15 and C18 Engines for Caterpillar Built Machines
Electrical Connectors - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
New Injector Wiring Harnesses Are Now Used on Certain C15 and C18 Machine Engines {1290, 1408}
New Injector Wiring Harnesses Are Now Used on Certain C15 and C18 Machine Engines {1290, 1408}
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>&reg;</SUP> Products {5063, 5705, 5734}
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Specifications
Electrical Ground Stud
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Operation and Maintenance Manual
Welding on Machines and Engines with Electronic Controls
986H Wheel Loader
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Installation of Cat<SUP>&reg;</SUP> Terrain for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Installation of Cat® Terrain for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Installation of G610 Hardware for Cat<SUP>&reg;</SUP> Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Installation of G610 Hardware for Cat® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Installation Of Operator ID System on Cat<SUP>&reg;</SUP> and Non-Cat Products {7600, 7610, 7620}
Installation Of Operator ID System on Cat® and Non-Cat Products {7600, 7610, 7620}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
Technical Information Bulletin
Payload Control System (PCS) Software May Not Support Certain 986H Wheel Loaders {1439, 7490, 7494, 7610, 7620}
Payload Control System (PCS) Software May Not Support Certain 986H Wheel Loaders {1439, 7490, 7494, 7610, 7620}
Testing and Adjusting
Self Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Module - Replace
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Module - Flash Program
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Connector Contact Description
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Troubleshooting
Diagnostic Trouble Codes
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Event Codes
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Determining Diagnostic Trouble Codes
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/16
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
Specifications
Electronic Control Wiring Group
C15 and C18 Engines for Caterpillar Built Machines
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Engine News
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
Operation and Maintenance Manual
Welding on Machines and Engines with Electronic Controls
986H Wheel Loader
Product Link
986H Wheel Loader
General Hazard Information
Caterpillar Corporate Radio
Special Instruction
Installation Procedure for Product Link PL522 and PL523 (Cellular) {7606}
Installation Procedure for Product Link PL522 and PL523 (Cellular) {7606}
Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620}
Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Installation of Remote Disable Module (RDM) Kit on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {7606}
Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
Technical Information Bulletin
Payload Control System (PCS) Software May Not Support Certain 986H Wheel Loaders {1439, 7490, 7494, 7610, 7620}
Payload Control System (PCS) Software May Not Support Certain 986H Wheel Loaders {1439, 7490, 7494, 7610, 7620}
Specifications
Communication Electronic Control Module (Product Link)
986H Wheel Loader Machine Systems
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
Systems Operation
System Overview
Product Link - PL522/523
System Components
Product Link - PL522/523
Configuration
Product Link - PL522/523
Installation Parameters Configure
Product Link - PL522/523
Spare Input Configure
Product Link - PL522/523
Commands
Product Link - PL522/523
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
Testing and Adjusting
Electronic Control Module (ECM) - Flash Program
Product Link - PL522/523
Electronic Control Module (ECM) - Replace
Product Link - PL522/523
Specifications
Product Link - PL522/523
Troubleshooting
General Information
Product Link - PL522/523
Diagnostic Capabilities
Product Link - PL522/523
Electronic Service Tool Does Not Communicate with ECM
Product Link - PL522/523
Reports and Messages Not Available
Product Link - PL522/523
Position Reports Not Available
Product Link - PL522/523
Reporting Interval Erratic
Product Link - PL522/523
Diagnostics and Events Not Available
Product Link - PL522/523
Operating Hours Discrepancy
Product Link - PL522/523
Diagnostic Code List
Product Link - PL522/523
MID 161 - CID 0254 - FMI 04
Product Link - PL522/523
MID 161 - CID 0254 - FMI 12
Product Link - PL522/523
MID 161 - CID 1250 - FMI 09
Product Link - PL522/523
MID 161 - CID 1888 - FMI 14
Product Link - PL522/523
MID 161 - CID 3766- FMI 14
Product Link - PL522/523
Service Magazine
Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}
2015/09/15
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link PL421 or Product Link PL420 System {7606, 7620}
2014/12/10
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606}
2014/08/08
Loss of Daily Reports May Be an Indicator of End of Life for the Product Link<SUP>&reg;</SUP> ECM on PL321SR and PL321VSR Systems {7606}
2014/06/24
Capturing Engine Stop Messages and Idle Information on All Caterpillar Products Equipped with Product Link 522 {7606}
2014/07/25
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/16
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Revision to "Reports and Messages Not Available" Troubleshooting Procedure for Cat<SUP>&reg;</SUP> Products with Cat<SUP>&reg;</SUP> Product Link 121/321 {7606}
2014/12/24
Event Codes (E2131, E2132, or E2133) Appearing Occasionally with On-board Machine Systems with a PL321, or PL121 Satellite System Installed {7600, 7606}
2015/01/06
Procedure to Improve Reporting into VisionLink after Re-Registration of Product Link Systems PL121/321 {7606}
2015/03/17
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/06/26
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/09/11
Operation and Maintenance Manual
Camera - Clean - If Equipped
986H Wheel Loader
Camera - If Equipped
986H Wheel Loader
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
Specifications
Antenna
986H Wheel Loader Machine Systems
Special Instruction
Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat<SUP>&reg;</SUP> Products Equipped with BR Series Connectors {1408}
Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat® Products Equipped with BR Series Connectors {1408}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Magazine
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
New Injector Wiring Harnesses Are Now Used on Certain C15 and C18 Machine Engines {1290, 1408}
New Injector Wiring Harnesses Are Now Used on Certain C15 and C18 Machine Engines {1290, 1408}
New Wiring Sockets Are Now Used for Certain C15 and C18 Machine Engines {1408}
New Wiring Sockets Are Now Used for Certain C15 and C18 Machine Engines {1408}
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.