AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

387-9467 WIRING GP-CAMERA -CONVEYOR S/N JCF1-UP AN ATTACHMENT PM622 COLD PLANER


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP

COLD PLANER PM622 COLD PLANER JCF
 PM622 Cold Planer JCF00001-UP (MACHINE) POWERED BY C18 Engine M0074299 PM622 JCF   (2016)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
INSTALLATION GP-COMMUNICATION
472-2960 INSTALLATION GP-COMMUNICATION
WIRING GP-CAMERA
376-4123 WIRING GP-CAMERA
WIRING GP-CAMERA
387-9467 WIRING GP-CAMERA
WIRING GP-CAMERA
387-9552 WIRING GP-CAMERA
WIRING GP-CENTER
383-7632 WIRING GP-CENTER
WIRING GP-CONVEYOR
374-1372 WIRING GP-CONVEYOR
 

#M00742990240
 

387-9467: WIRING GP-CAMERA

387-9467 WIRING GP-CAMERA -CONVEYOR
S/N JCF1-UP
AN ATTACHMENT
i06272389 M0074299
3879467 WIRING GP-CAMERA Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 394-2675 [1] SUPPORT-MOUNTING  
2. 398-1930 [1] HARNESS AS-MONITOR (CAMERA)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
3. 274-4477 [1] CABLE AS (VIDEO, 5-M)  
4. 336-6684 Y [1] CAMERA GP  
5. 7K-1181 [9] STRAP-CABLE  
6. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
7. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00742990241
 

387-9552: WIRING GP-CAMERA

387-9552 WIRING GP-CAMERA -REAR
S/N JCF1-UP
AN ATTACHMENT
i06222345 M0074299
3879552 WIRING GP-CAMERA Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [4] STRAP-CABLE  
2. 283-0658 [1] CABLE AS (VIDEO, 7.5-M)  
3. 336-6684 J [1] CAMERA GP  
4. 396-9665 [1] BRACKET (CAMERA)  
5. 398-1930 [1] HARNESS AS-MONITOR (CAMERA)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
6. 132-5789 [1] CLIP (LADDER)  
7. 4P-7581 [2] CLIP (LADDER)  
8. 5C-7261 M [2] NUT (M8X1.25-THD)  
9. 7K-1181 [17] STRAP-CABLE  
10. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
12. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
13. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
14. 9G-4191 [1] GROMMET  
   
    AVAILABLE REPAIR KIT(S):
  251-4162 J [1] KIT-BRACKET (CAMERA)  
    (INCLUDES BRACKET, BOLTS, LOCK NUTS, SOCKET BOLTS, GASKET & ALLEN WRENCH)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#M00742990242
 

383-7632: WIRING GP-CENTER

383-7632 WIRING GP-CENTER
S/N JCF1-UP
PART OF 383-6722 ELECTRICAL AR
i06749528 M0074299
3837632 WIRING GP-CENTER Parts scheme 3837632 WIRING GP-CENTER Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7V-5628 [1] PLATE (TOP)  
2. 8T-8737 [2] PLUG-SEAL  
3. 177-2215 [9] STRAP-DUAL CLAMP  
4. 200-6345 [8] SADDLE-MOUNTING (DUAL SWIVEL)  
5. 204-2281 [16] STRAP-CABLE  
6. 256-6453 [1] SENSOR-TEMPERATURE (2-PIN)  
7. 260-5864 [1] SWITCH GP-TOGGLE (FUEL PRIMING)  
8. 260-5865 [1] SWITCH AS-TOGGLE (LIGHT)  
    (EACH SWITCH AS INCLUDES)
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 20-GA)  
9. 320-3063 [1] SENSOR GP-PRESSURE  
10. 382-2001 [1] SENSOR GP-LIQUID LEVEL (WATER IN FUEL)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  214-7568 [1] SEAL-O-RING  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
11. 494-6462 Y [1] HARNESS AS-CHASSIS  
12. 130-5300 [4] CLIP  
13. 132-5789 [4] CLIP (LADDER)  
14. 155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
15. 228-7100 [1] SEAL-O-RING  
16. 277-1873 [2] CLIP (LADDER)  
17. 352-3964 [1] CLIP (LADDER)  
18. 352-3968 [1] CLIP (LADDER)  
19. 3K-0360 [1] SEAL-O-RING  
20. 4B-4280 [1] WASHER (13.5X27X2.5-MM THK)  
21. 4L-6454 [1] BOLT (3/8-16X1-IN)  
22. 4P-7428 [1] CLIP (LADDER)  
23. 4P-7581 [14] CLIP (LADDER)  
24. 4P-8134 [1] CLIP (LADDER)  
25. 5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
26. 7K-1181 [36] STRAP-CABLE  
27. 7V-5626 [2] CLAMP  
28. 7X-2619 M [1] BOLT (M6X1X10-MM)  
29. 8C-8451 M [2] BOLT (M6X1X40-MM)  
30. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
32. 8T-4189 M [13] BOLT (M8X1.25X20-MM)  
33. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
34. 8T-4224 [15] WASHER-HARD (8.8X16X2-MM THK)  
35. 8T-4244 M [1] NUT (M12X1.75-THD)  
36. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00742990243
 

374-1372: WIRING GP-CONVEYOR

374-1372 WIRING GP-CONVEYOR
S/N JCF1-UP
PART OF 374-1367, 374-1368 CONVEYOR AR-SECOND STAGE
AN ATTACHMENT
i06222346 M0074299
3741372 WIRING GP-CONVEYOR Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 163-1201 [1] HORN AS (24-VOLT, LOW TONE)  
3. 177-2215 [12] STRAP-DUAL CLAMP  
4. 256-8730 [1] PLATE AS  
5. 283-0659 [1] CABLE AS-COAXIAL  
6. 476-7322 Y [1] HARNESS AS-ENGINE (CONVEYOR)  
7. 4P-7428 [2] CLIP (LADDER)  
8. 7K-1181 [20] STRAP-CABLE  
9. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
11. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
12. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00742990244
 

387-9545: WIRING GP-ELECTRONIC CONTROL

387-9545 WIRING GP-ELECTRONIC CONTROL
PART OF 382-5538, 519-0748 ENGINE AR-COMPLETE
AN ATTACHMENT
i06576534 M0074299
3879545 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [23] STRAP-CABLE  
2. 7T-0266 [1] BRACKET AS  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
3. 206-1345 [2] STRAP-CABLE  
4. 246-9353 [1] PLUG AS  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [8] PLUG-SEAL  
5. 288-1023 [1] BRACKET-SUPPORT  
6. 354-0049 Y [1] HARNESS AS-ENGINE  
7. 0S-0509 [4] BOLT (3/8-16X0.75-IN)  
8. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
9. 104-6202 [2] CLIP (LADDER)  
10. 132-5789 [2] CLIP (LADDER)  
11. 1A-4273 [1] BOLT (5/8-18X1.25-IN)  
12. 303-4649 [1] CLIP (LADDER)  
13. 0T-0102 [1] BOLT (3/8-16X0.625-IN)  
14. 3E-4352 [1] WASHER-HARD (8.8X20.5X2.5-MM THK)  
15. 4P-7581 [5] CLIP (LADDER)  
16. 4P-8134 [6] CLIP (LADDER)  
17. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
19. 0S-1594 [1] BOLT (3/8-16X1-IN)  
  Y   SEPARATE ILLUSTRATION
 

#M00742990245
 

374-1289: WIRING GP-MACHINE

374-1289 WIRING GP-MACHINE -LH
S/N JCF1-UP
PART OF 383-6722 ELECTRICAL AR
Type 1
i06214342 M0074299
3741289 WIRING GP-MACHINE Parts scheme 3741289 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 196-4206 M [4] BOLT-STACKING (M6X1X64-MM)  
2. 207-2386 M [6] BOLT-STACKING (M6X1.25X49-MM)  
3. 3S-2093 [53] STRAP-CABLE  
4. 7R-7951 [1] PLATE  
5. 7R-7955 [2] PLATE (SLOTTED)  
6. 7V-5628 [1] PLATE (TOP)  
7. 118-6878 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
8. 132-8487 [3] NUT-RING  
9. 132-8488 [1] NUT-RING  
10. 163-1201 [1] HORN AS (24-VOLT, LOW TONE)  
11. 177-2215 [10] STRAP-DUAL CLAMP  
12. 207-2387 [3] PLATE  
13. 272-5934 [6] CLAMP  
14. 301-2980 [2] SWITCH AS-TOGGLE (ROTOR)  
    (EACH INCLUDES)
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 20-GA)  
15. 334-5410 [1] LAMP GP-SIGNAL  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 384-8651 Y [2] HARNESS AS-WIRING (PROPEL MOTOR)  
17. 399-9075 [6] HARNESS AS-SENSOR  
    (EACH INCLUDES)
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  176-9299 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
18. 415-4792 [1] PLATE AS  
19. 469-7514 [1] CABLE AS  
  8C-3056 E CABLE (2-GA, RED)(47-CM)  
  193-9141 [1] COVER-TERMINAL  
  276-1786 [1] COVER-TERMINAL (RED)  
  311-6185 TERMINAL AS  
  311-6184 [1] TERMINAL-RING (2-GA, 3/8-IN SCREW)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)  
  278-1439 [1] TERMINAL AS-RING  
  278-1438 [1] TERMINAL-RING  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)  
20. 470-7130 [1] CABLE AS  
  8C-0596 E CABLE (2-GA)(113-CM)  
  3L-6513 [1] TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW)  
  6T-5598 [1] TERMINAL-RING (1-GA TO 2-GA, 5/16-IN SCREW)  
21. 495-7489 Y [1] HARNESS AS-WIRING (LH)  
22. 130-5300 [5] CLIP  
23. 130-5301 [2] CLIP  
24. 132-5789 [2] CLIP (LADDER)  
25. 237-9960 [1] CLIP (LADDER)  
26. 3E-6754 [1] GROMMET  
27. 327-0325 [4] STRAP-CABLE  
28. 352-3969 [1] CLIP (LADDER)  
29. 4P-7581 [10] CLIP (LADDER)  
30. 5C-2890 M [3] NUT (M6X1-THD)  
31. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
32. 5P-4116 [3] WASHER-HARD (8.8X20.5X2-MM THK)  
33. 7K-1181 [61] STRAP-CABLE  
34. 7P-1695 [1] WASHER (10.5X19X3-MM THK)  
35. 7R-7941 [6] CLAMP  
36. 7V-5626 [2] CLAMP  
37. 7X-2535 M [2] BOLT (M6X1X60-MM)  
38. 8C-8451 M [2] BOLT (M6X1X40-MM)  
39. 8C-8560 [16] SCREW-LOCK (4-40X0.5-IN)  
40. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4133 M [1] NUT (M10X1.5-THD)  
42. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
43. 8T-4138 M [4] BOLT (M6X1X20-MM)  
44. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
45. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
46. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
47. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
48. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
49. 8T-4244 M [3] NUT (M12X1.75-THD)  
50. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
51. 5C-9553 M [2] BOLT (M6X1X16-MM)  
52. 231-3930 [2] RELAY AS (24-VOLT)  
53. 344-5673 M [2] NUT (M6X1-THD)  
54. 522-6180 Y [1] HARNESS AS-WIRING (ROTOR)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00742990246
 

374-1289: WIRING GP-MACHINE

374-1289 WIRING GP-MACHINE -LH
S/N JCF1-UP
PART OF 383-6722 ELECTRICAL AR
Type 2
i06998585 M0074299
3741289 WIRING GP-MACHINE Parts scheme 3741289 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 196-4206 M [4] BOLT-STACKING (M6X1X64-MM)  
2. 207-2386 M [6] BOLT-STACKING (M6X1.25X49-MM)  
3. 3S-2093 [53] STRAP-CABLE  
4. 7R-7951 [1] PLATE  
5. 7R-7955 [2] PLATE (SLOTTED)  
6. 7V-5628 [1] PLATE (TOP)  
7. 118-6878 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
8. 132-8487 [3] NUT-RING  
10. 163-1201 [1] HORN AS (24-VOLT, LOW TONE)  
11. 177-2215 C [12] STRAP-DUAL CLAMP  
12. 207-2387 [3] PLATE  
13. 272-5934 [6] CLAMP  
14. 301-2980 [2] SWITCH AS-TOGGLE (ROTOR)  
    (EACH INCLUDES)
  5P-5677 BD WIRE (18-GA, BLACK)  
  112-4550 E SLEEVE (21-CM)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 20-GA)  
15. 334-5410 [1] LAMP GP-SIGNAL  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 519-7991 CY [2] HARNESS AS-WIRING (PROPEL MOTOR)  
17. 399-9075 [6] HARNESS AS-SENSOR  
    (EACH INCLUDES)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  176-9299 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
18. 415-4792 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
19. 469-7514 [1] CABLE AS  
  8C-3056 E CABLE (2-GA, RED)(47-CM)  
  193-9141 [1] COVER-TERMINAL  
  276-1786 [1] COVER-TERMINAL (RED)  
  311-6184 [1] TERMINAL-RING (2-GA, 3/8-IN SCREW)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)  
  278-1438 [1] TERMINAL-RING  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)  
20. 470-7130 [1] CABLE AS  
  8C-0596 E CABLE (2-GA)(113-CM)  
  3L-6513 [1] TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW)  
  6T-5598 [1] TERMINAL-RING (1-GA TO 2-GA, 5/16-IN SCREW)  
21. 519-7990 CY [1] HARNESS AS-WIRING (LH)  
22. 130-5300 [5] CLIP  
23. 130-5301 [2] CLIP  
24. 132-5789 [2] CLIP (LADDER)  
25. 237-9960 [1] CLIP (LADDER)  
26. 3E-6754 [1] GROMMET  
27. 327-0325 [4] STRAP-CABLE  
28. 352-3969 [1] CLIP (LADDER)  
29. 4P-7581 [10] CLIP (LADDER)  
30. 5C-2890 M [3] NUT (M6X1-THD)  
31. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
32. 5P-4116 [3] WASHER-HARD (8.8X20.5X2-MM THK)  
33. 7K-1181 C [60] STRAP-CABLE  
34. 7P-1695 [1] WASHER (10.5X19X3-MM THK)  
35. 7R-7941 [6] CLAMP  
36. 7V-5626 [2] CLAMP  
37. 7X-2535 M [2] BOLT (M6X1X60-MM)  
38. 8C-8451 M [2] BOLT (M6X1X40-MM)  
39. 8C-8560 C [12] SCREW-LOCK (4-40X0.5-IN)  
40. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4133 M [1] NUT (M10X1.5-THD)  
42. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
43. 8T-4138 M [4] BOLT (M6X1X20-MM)  
44. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
45. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
46. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
47. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
48. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
49. 8T-4244 M [3] NUT (M12X1.75-THD)  
50. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
51. 5C-9553 M [2] BOLT (M6X1X16-MM)  
52. 231-3930 [2] RELAY AS (24-VOLT)  
53. 344-5673 M [2] NUT (M6X1-THD)  
54. 522-6180 Y [1] HARNESS AS-WIRING (ROTOR)(MACHINE)  
55. 9B-1117 C [4] LOCKWASHER  
56. 6V-9671 CM [4] SCREW-MACHINE (M3X0.5X12-MM)  
57. 3C-6969 CM [4] NUT (M3X0.5-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00742990247
 

374-1290: WIRING GP-MACHINE

374-1290 WIRING GP-MACHINE -RH
S/N JCF1-UP
PART OF 383-6722 ELECTRICAL AR
Type 1
i06214341 M0074299
3741290 WIRING GP-MACHINE Parts scheme 3741290 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 207-2386 M [6] BOLT-STACKING (M6X1.25X49-MM)  
2. 3S-2093 [82] STRAP-CABLE  
3. 7R-7951 [3] PLATE  
5. 132-8487 [3] NUT-RING  
6. 132-8488 [1] NUT-RING  
7. 177-2215 [13] STRAP-DUAL CLAMP  
8. 207-2387 [3] PLATE  
9. 219-6485 Y [1] LAMP GP-FLOOD (24-VOLT)  
10. 267-2145 [1] ALARM AS  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-1813 E SLEEVE (23-CM)  
11. 272-5934 [4] CLAMP  
12. 334-5410 [1] LAMP GP-SIGNAL  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
14. 384-8651 Y [2] HARNESS AS-WIRING (PROPEL MOTOR)  
15. 399-9075 [4] HARNESS AS-SENSOR  
    (EACH INCLUDES)
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  176-9299 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 415-4792 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
17. 488-5588 Y [1] HARNESS AS-WIRING (FLOODLIGHT)  
18. 130-5300 [3] CLIP  
19. 130-5301 [2] CLIP  
20. 132-5789 [4] CLIP (LADDER)  
21. 150-5931 [1] GROMMET  
22. 162-9112 [2] GROMMET-SPLIT  
23. 198-4775 [2] WASHER-HARD (6.6X15X6-MM THK)  
24. 208-0075 [2] CLAMP-HALF  
25. 237-9960 [2] CLIP (LADDER)  
26. 2V-8259 [1] GROMMET  
27. 313-4916 [6] CLAMP-HALF  
28. 327-0325 [1] STRAP-CABLE  
29. 352-3968 [1] CLIP (LADDER)  
30. 4B-4280 [3] WASHER (13.5X27X2.5-MM THK)  
31. 4P-7428 [2] CLIP (LADDER)  
32. 4P-7581 [5] CLIP (LADDER)  
33. 5C-2890 M [3] NUT (M6X1-THD)  
34. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
35. 5P-4116 [5] WASHER-HARD (8.8X20.5X2-MM THK)  
36. 5P-8439 [2] GROMMET  
37. 6V-7357 M [2] BOLT (M6X1X25-MM)  
38. 7K-1181 [45] STRAP-CABLE  
39. 7X-2535 M [4] BOLT (M6X1X60-MM)  
41. 8C-8560 [16] SCREW-LOCK (4-40X0.5-IN)  
42. 8T-3844 M [2] BOLT (M6X1X70-MM)  
43. 8T-4138 M [2] BOLT (M6X1X20-MM)  
44. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
45. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
46. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
47. 8T-4244 M [3] NUT (M12X1.75-THD)  
48. 9X-8256 [5] WASHER (6.6X12X2-MM THK)  
49. 121-8004 [4] CLAMP  
50. 102-8705 [2] PLATE (TOP)  
51. 8T-6912 M [2] BOLT (M8X1.25X50-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00742990248
 

374-1290: WIRING GP-MACHINE

374-1290 WIRING GP-MACHINE -RH
S/N JCF1-UP
PART OF 383-6722 ELECTRICAL AR
Type 2
i06998572 M0074299
3741290 WIRING GP-MACHINE Parts scheme 3741290 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 207-2386 M [6] BOLT-STACKING (M6X1.25X49-MM)  
2. 3S-2093 [82] STRAP-CABLE  
3. 7R-7951 [3] PLATE  
5. 132-8487 [3] NUT-RING  
7. 177-2215 [20] STRAP-DUAL CLAMP  
8. 207-2387 [3] PLATE  
9. 219-6485 Y [1] LAMP GP-FLOOD (24-VOLT)(VERTICAL)  
10. 267-2145 [1] ALARM AS  
  5P-5623 BD WIRE-ELECTRICAL (16-GA, BLACK)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-1813 E SLEEVE (29-CM)  
11. 272-5934 [4] CLAMP  
12. 334-5410 [1] LAMP GP-SIGNAL  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
14. 519-7991 CY [2] HARNESS AS-WIRING (PROPEL MOTOR)  
15. 399-9075 [4] HARNESS AS-SENSOR  
    (EACH INCLUDES)
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  176-9299 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 415-4792 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
17. 488-5588 Y [1] HARNESS AS-WIRING (FLOODLIGHT)  
18. 130-5300 [3] CLIP  
19. 130-5301 [2] CLIP  
20. 132-5789 [4] CLIP (LADDER)  
21. 150-5931 [1] GROMMET  
22. 162-9112 [2] GROMMET-SPLIT  
23. 198-4775 [2] WASHER-HARD (6.6X15X6-MM THK)  
24. 208-0075 [2] CLAMP-HALF  
25. 237-9960 [2] CLIP (LADDER)  
26. 2V-8259 [1] GROMMET  
27. 313-4916 [6] CLAMP-HALF  
28. 327-0325 [1] STRAP-CABLE  
29. 352-3968 [1] CLIP (LADDER)  
30. 4B-4280 [3] WASHER (13.5X27X2.5-MM THK)  
31. 4P-7428 [2] CLIP (LADDER)  
32. 4P-7581 [5] CLIP (LADDER)  
33. 5C-2890 M [3] NUT (M6X1-THD)  
34. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
35. 5P-4116 [5] WASHER-HARD (8.8X20.5X2-MM THK)  
36. 5P-8439 [2] GROMMET  
37. 6V-7357 M [2] BOLT (M6X1X25-MM)  
38. 7K-1181 [62] STRAP-CABLE  
39. 7X-2535 M [4] BOLT (M6X1X60-MM)  
41. 8C-8560 C [12] SCREW-LOCK (4-40X0.5-IN)  
42. 8T-3844 M [2] BOLT (M6X1X70-MM)  
43. 8T-4138 M [6] BOLT (M6X1X20-MM)  
44. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
45. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
46. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
47. 8T-4244 M [3] NUT (M12X1.75-THD)  
48. 9X-8256 [9] WASHER (6.6X12X2-MM THK)  
49. 121-8004 [4] CLAMP  
50. 102-8705 [2] PLATE (TOP)  
51. 7X-0818 M [2] BOLT (M8X1.25X45-MM)  
52. 9B-1117 C [4] LOCKWASHER  
53. 6V-9671 CM [12] SCREW-MACHINE (M3X0.5X12-MM)  
54. 3C-6969 CM [4] NUT (M3X0.5-THD)  
55. 533-5480 [2] PLATE AS  
    (EACH INCLUDES)
  [2] NUT-WELD  
56. 352-3965 [1] CLIP (LADDER)  
57. 352-3964 [1] CLIP (LADDER)  
58. 519-7987 Y [1] HARNESS AS-CONTROL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00742990249
 

518-3877: BELT GP-DRIVE

518-3877 BELT GP-DRIVE
S/N JCF1-UP
PART OF 374-1269 POWER TRAIN AR
i06948852 M0074299
5183877 BELT GP-DRIVE Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

Information:

Operation and Maintenance Manual
Battery Disconnect Switch
PM620 and PM622 Cold Planers
Battery or Battery Cable - Inspect/Replace
PM620 and PM622 Cold Planers
Monitoring System
PM620 and PM622 Cold Planers
Fuses - Replace
PM620 and PM622 Cold Planers
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation of the White Noise Back Up Alarms {7406}
Installation of the White Noise Back Up Alarms {7406}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Systems Operation
Location of Electrical Components
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems
Electrical Schematic (Auxiliary Hydraulic System)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System
Electrical Schematic (Conveyor System)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System
Electrical Schematic (Hydraulic Fan)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System
Electrical Schematic (Rotor Drive System)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
System Schematic
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System
Wiring Harness (Open Circuit) - Test
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System
Wiring Harness (Short Circuit) - Test
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System
ECM Location Code - Test
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System
Connector Locations
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System
Electrical Connector - Inspect
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System
Connector Contact Description
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System
CAN Data Link - Test
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System
CAN Data Link - Test
PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope
Service Magazine
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}
Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}
Updated Wire Harness Routing Now Used on PM620 and PM622 Cold Planers {1408}
Updated Wire Harness Routing Now Used on PM620 and PM622 Cold Planers {1408}
Improved Inertial Measuring Unit is Now Available for Certain Track-Type Tractors and Cold Planers {1408}
Improved Inertial Measuring Unit is Now Available for Certain Track-Type Tractors and Cold Planers {1408}

Caterpillar Parts SIS Catalog PM622 :

WIRING GP-CAMERA
376-4123 WIRING GP-CAMERA
SWITCH GP-TOGGLE
146-0240 SWITCH GP-TOGGLE
SWITCH GP-PRESSURE
275-1253 SWITCH GP-PRESSURE
SWITCH GP-LIQUID LEVEL
172-8660 SWITCH GP-LIQUID LEVEL
SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT
SWITCH GP-DISCONNECT
452-6892 SWITCH GP-DISCONNECT
STARTING MOTOR GP-ELECTRIC
390-3128 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
349-6536 STARTING MOTOR GP-ELECTRIC
WIRING GP-CAMERA
387-9552 WIRING GP-CAMERA
WIRING GP-CENTER
383-7632 WIRING GP-CENTER
WIRING GP-CONVEYOR
374-1372 WIRING GP-CONVEYOR
WIRING GP-ELECTRONIC CONTROL
387-9545 WIRING GP-ELECTRONIC CONTROL
WIRING GP-MACHINE
374-1289 WIRING GP-MACHINE
WIRING GP-MACHINE
374-1289 WIRING GP-MACHINE
WIRING GP-MACHINE
374-1290 WIRING GP-MACHINE
WIRING GP-MACHINE
374-1290 WIRING GP-MACHINE
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.