390-4706 HARNESS AS-LIGHTING S/N LH91-UP PART OF 376-4129 LIGHTING GP-SIGNAL AN ATTACHMENT PM620 COLD PLANER

Part No	Qty	Parts name
9X-3401	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
		(INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
		(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
8T-8737	[1]	PLUG-SEAL
102-8803	[1]	KIT-RECEPTACLE (3-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
194-5226	[1]	WIRE AS (16-GA)
		-OR-
194-5227	[1]	WIRE AS (14-GA)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
E		ORDER BY THE CENTIMETER

#M00743010181

487-9664: HARNESS AS-MONITOR

HARNESS AS-MONITOR

487-9664 HARNESS AS-MONITOR
S/N LH91-UP
PART OF 393-6394 DISPLAY GP-MONITOR
AN ATTACHMENT

i06275513 M0074301

For full view, you need register

Parts for your PM620 COLD PLANER:

CATERPILLAR SIS

Part No	Qty	Parts name
276-7597 E		CONDUIT (29-MM ID)(33-CM)
239-5375 M	[2]	NUT (M32X1.5-THD)
155-2257	[1]	KIT-CONNECTING PLUG (12-PIN)
		(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
455-0709	[1]	SEAL-CONNECTOR
230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
455-0707	[1]	SEAL-CONNECTOR
239-7352	[1]	PLUG AS-CONNECTOR (6-PIN)
455-0707	[1]	SEAL-CONNECTOR
8T-8737	[14]	PLUG-SEAL
194-5226	[22]	WIRE AS (16-GA)
		-OR-
194-5227	[22]	WIRE AS (14-GA)
E		ORDER BY THE CENTIMETER
M		METRIC PART

#M00743010182

487-9665: HARNESS AS-MONITOR

HARNESS AS-MONITOR

487-9665 HARNESS AS-MONITOR -GRADE, SLOPE
S/N LH91-UP
PART OF 387-9468 DISPLAY GP-MONITOR
AN ATTACHMENT

i06273923 M0074301

For full view, you need register

Parts for your PM620 COLD PLANER:

CATERPILLAR SIS

Part No	Qty	Parts name
332-6697	[1]	CAP-CONNECTOR
467-2859 H		CABLE (5-DM)
230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
455-0709	[1]	SEAL-CONNECTOR
230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
455-0707	[1]	SEAL-CONNECTOR
8T-8737	[8]	PLUG-SEAL
332-6696	[1]	RECEPTACLE AS (13-PIN)
194-5226	[18]	WIRE AS (16-GA)
		-OR-
194-5227	[18]	WIRE AS (14-GA)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM)
E		ORDER BY THE CENTIMETER
H		ORDER BY THE DESIMETER

#M00743010183

487-9666: HARNESS AS-MONITOR

HARNESS AS-MONITOR

487-9666 HARNESS AS-MONITOR
S/N LH91-UP
PART OF 393-6393, 393-6394 DISPLAY GP-MONITOR
AN ATTACHMENT

i06272381 M0074301

For full view, you need register

Parts for your PM620 COLD PLANER:

CATERPILLAR SIS

Part No	Qty	Parts name
276-7597 E		CONDUIT (29-MM ID)(41-CM)
239-5375 M	[2]	NUT (M32X1.5-THD)
155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
155-2256	[1]	KIT-CONNECTING PLUG (12-PIN)
155-2257	[1]	KIT-CONNECTING PLUG (12-PIN)
155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
239-7356	[1]	PLUG AS-CONNECTOR (12-PIN)
241-8834	[1]	PLUG AS-CONNECTOR (12-PIN)
230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
		(EACH PLUG AS INCLUDES)
455-0709	[1]	SEAL-CONNECTOR
239-7352	[1]	PLUG AS-CONNECTOR (6-PIN)
230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
		(EACH PLUG AS INCLUDES)
455-0707	[1]	SEAL-CONNECTOR
8T-8737	[18]	PLUG-SEAL
194-5226	[70]	WIRE AS (16-GA)
		-OR-
194-5227	[70]	WIRE AS (14-GA)
E		ORDER BY THE CENTIMETER
M		METRIC PART

#M00743010184

487-9663: HARNESS AS-PANEL

HARNESS AS-PANEL

487-9663 HARNESS AS-PANEL
S/N LH91-UP
PART OF 374-7677, 374-7678 CONSOLE GP-INSTRUMENT

i06279309 M0074301

For full view, you need register

Parts for your PM620 COLD PLANER:

CATERPILLAR SIS

Part No	Qty	Parts name
155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
155-2265	[2]	KIT-CONNECTING PLUG (8-PIN)
155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
213-0141	[1]	CONNECTOR (1-PIN)
281-8811	[1]	PLUG AS-CONNECTOR (6-PIN)
455-0707	[1]	SEAL-CONNECTOR
8T-8737	[18]	PLUG-SEAL
194-5226	[47]	WIRE AS (16-GA)
		-OR-
194-5227	[47]	WIRE AS (14-GA)
189-3158	[1]	SUPPRESSOR-ARC
1P-0810 B		TAPE-ELECTRICAL
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(45-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
B		USE AS REQUIRED
E		ORDER BY THE CENTIMETER

#M00743010185

355-1642: HARNESS AS-SWITCH

HARNESS AS-SWITCH

355-1642 HARNESS AS-SWITCH
S/N TXH1-UP; TXW1-UP
PART OF 390-3128 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT

i06258973 M0074301

For full view, you need register

Parts for your PM620 COLD PLANER:

CATERPILLAR SIS

Part No	Qty	Parts name
8T-8737	[2]	PLUG-SEAL
2L-8076	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
264-7029	[1]	SEAL-CONNECTOR
243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)

#M00743010186

384-8651: HARNESS AS-WIRING

HARNESS AS-WIRING

384-8651 HARNESS AS-WIRING
S/N LH91-UP
PART OF 374-1289, 374-1290 WIRING GP-MACHINE

i06214325 M0074301

For full view, you need register

Parts for your PM620 COLD PLANER:

CATERPILLAR SIS

Part No	Qty	Parts name
274-3781	[1]	CAP-SEAL
155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
237-0227	[1]	PLUG AS-CONNECTOR (3-PIN)
455-0705	[1]	SEAL-CONNECTOR
8T-8737	[3]	PLUG-SEAL
194-5226	[18]	WIRE AS (16-GA)
		-OR-
194-5227	[18]	WIRE AS (14-GA)

#M00743010187

425-0289: HARNESS AS-WIRING

HARNESS AS-WIRING

425-0289 HARNESS AS-WIRING
S/N TXH1-UP; TXW1-UP
INJECTOR
PART OF 278-5662 BASE GP-VALVE COVER & INJ HARN
AN ATTACHMENT

i05294780 M0074301

For full view, you need register

Parts for your PM620 COLD PLANER:

CATERPILLAR SIS

Part No	Qty	Parts name
102-8801	[1]	KIT-RECEPTACLE (12-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
103-8134	[1]	KIT-RECEPTACLE (12-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
9X-3401	[9]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[9]	PIN-CONNECTOR (14-GA TO 16-GA)
8T-8737	[3]	PLUG-SEAL

#M00743010188

488-5588: HARNESS AS-WIRING

HARNESS AS-WIRING

488-5588 HARNESS AS-WIRING -RH
S/N LH91-UP
PART OF 374-1290 WIRING GP-MACHINE

i06586928 M0074301

For full view, you need register

Parts for your PM620 COLD PLANER:

CATERPILLAR SIS

Part No	Qty	Parts name
332-6697	[1]	CAP-CONNECTOR
332-6701	[3]	CAP AS-PROTECTION
195-5219	[1]	CONNECTOR (3-PIN)
211-0052	[1]	NUT (1-11/16-18-THD)
9X-3401	[42]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
	[42]	RETAINER-SPRING
9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
3E-4367	[1]	RING-RETAINING
9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
9X-4391	[1]	PLUG AS-CONNECTOR (70-PIN)
3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
3E-4367	[1]	RING-RETAINING
9X-5615	[2]	SEAL (INTERFACE, 70-PIN)
155-2260	[8]	KIT-CONNECTING PLUG (3-PIN)
174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
155-2270	[38]	KIT-CONNECTING PLUG (2-PIN)
155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
177-9648	[1]	KIT-CONNECTING PLUG (2-PIN)
		(INCLUDES PLUG AS & WEDGE)
281-8804	[1]	PLUG AS-CONNECTOR (3-PIN)
455-0705	[1]	SEAL-CONNECTOR
281-8811	[2]	PLUG AS-CONNECTOR (6-PIN)
		(EACH INCLUDES)
455-0707	[1]	SEAL-CONNECTOR
8T-8737	[36]	PLUG-SEAL
102-8802	[4]	KIT-RECEPTACLE (2-PIN)
102-8803	[1]	KIT-RECEPTACLE (3-PIN)
103-8134	[2]	KIT-RECEPTACLE (12-PIN)
177-9645	[1]	KIT-RECEPTACLE (2-PIN)
102-8801	[2]	KIT-RECEPTACLE (12-PIN)
		(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
167-3692	[1]	RECEPTACLE AS-CONNECTOR (31-PIN)
332-6696	[1]	RECEPTACLE AS (13-PIN)
7T-0094	[2]	SOCKET-CONNECTOR (12-GA TO 14-GA)
194-5226	[225]	WIRE AS (16-GA)
		-OR-
194-5227	[225]	WIRE AS (14-GA)
1P-0810 B		TAPE-ELECTRICAL
2L-8054	[6]	TERMINAL-RING (6-GA, 1/2-IN SCREW)
		-OR-
2L-8061	[6]	TERMINAL-RING (8-GA, 1/2-IN SCREW)
2L-8071	[1]	TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(150-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)
310-0674	[1]	LOCKWASHER
B		USE AS REQUIRED
E		ORDER BY THE CENTIMETER
M		METRIC PART

#M00743010189

495-7489: HARNESS AS-WIRING

HARNESS AS-WIRING

495-7489 HARNESS AS-WIRING -LEFT
S/N LH91-UP
PART OF 374-1289 WIRING GP-MACHINE

i06601256 M0074301

For full view, you need register

Parts for your PM620 COLD PLANER:

CATERPILLAR SIS

Part No	Qty	Parts name
332-6697	[1]	CAP-CONNECTOR
332-6701	[3]	CAP AS-PROTECTION
243-5362	[1]	CAP-DUST
112-4735	[1]	CONTROL GP-DIODE BLOCK
6T-7596	[4]	DIODE-RECTIFIER (24-VOLT)
9W-0852	[12]	PIN-CONNECTOR (14-GA TO 16-GA)
102-8801	[1]	KIT-RECEPTACLE (12-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
9X-3401	[20]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[20]	PIN-CONNECTOR (14-GA TO 16-GA)
9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
3E-4367	[1]	RING-RETAINING
9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
9X-4385	[1]	PLUG AS-CONNECTOR (6-PIN)
9X-4391	[1]	PLUG AS-CONNECTOR (70-PIN)
3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
3E-4367	[1]	RING-RETAINING
9X-5615	[2]	SEAL (INTERFACE, 70-PIN)
155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
155-2270	[38]	KIT-CONNECTING PLUG (2-PIN)
155-2271	[4]	KIT-CONNECTING PLUG (4-PIN)
174-0503	[3]	KIT-CONNECTING PLUG (3-PIN)
155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
155-2260	[10]	KIT-CONNECTING PLUG (3-PIN)
		(EACH INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
167-3693	[1]	PLUG AS-CONNECTOR (31-PIN)
230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
455-0705	[1]	SEAL-CONNECTOR
238-8247	[1]	PLUG AS-CONNECTOR (2-PIN)
455-0704	[1]	SEAL-CONNECTOR
281-8811	[2]	PLUG AS-CONNECTOR (6-PIN)
		(EACH INCLUDES)
455-0707	[1]	SEAL-CONNECTOR
8T-8737	[56]	PLUG-SEAL
102-8802	[6]	KIT-RECEPTACLE (2-PIN)
102-8803	[2]	KIT-RECEPTACLE (3-PIN)
103-8134	[2]	KIT-RECEPTACLE (12-PIN)
		(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
134-2540	[3]	RECEPTACLE AS-CONNECTOR (3-PIN)
332-6696	[1]	RECEPTACLE AS (13-PIN)
194-5226	[285]	WIRE AS (16-GA)
		-OR-
194-5227	[285]	WIRE AS (14-GA)
172-9200	[1]	SUPPRESSOR-ARC
1P-0810 B		TAPE-ELECTRICAL
2L-8054	[5]	TERMINAL-RING (6-GA, 1/2-IN SCREW)
		-OR-
2L-8061	[5]	TERMINAL-RING (8-GA, 1/2-IN SCREW)
2L-8081	[3]	TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(190-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(35-CM)
8T-5346 E		TUBE-HEAT SHRINK (19.1-MM DIA)(10-CM)
B		USE AS REQUIRED
E		ORDER BY THE CENTIMETER
M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

HARNESS GP

Special Instruction

Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat® Products Equipped with BR Series Connectors {1408}
Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat^® Products Equipped with BR Series Connectors {1408}

Procedure to Reroute the RH Harness on Certain PM620 and PM622 Cold Planers {7000}
Procedure to Reroute the RH Harness on Certain PM620 and PM622 Cold Planers {7000}

Procedure To Install 3D Grade Control Harness On Certain Cold Planers {1408}
Procedure To Install 3D Grade Control Harness On Certain Cold Planers {1408}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REROUTING THE 488-5588 RH HARNESS ON CERTAIN PM620 AND PM622 COLD PLANERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE 488-5588 RH HARNESS ON CERTAIN PM620 AND PM622 COLD PLANERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

Service Magazine

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Updated Wire Harness Routing Now Used on PM620 and PM622 Cold Planers {1408}
Updated Wire Harness Routing Now Used on PM620 and PM622 Cold Planers {1408}

A New 3D Grade Control Harness is Now Used for Certain Cold Planers Machines {1408}
A New 3D Grade Control Harness is Now Used for Certain Cold Planers Machines {1408}

Caterpillar Parts SIS Catalog PM620 :

476-7322 HARNESS AS-ENGINE

354-0049 HARNESS AS-ENGINE

529-8303 HARNESS AS-CONTROL

519-7987 HARNESS AS-CONTROL

482-9636 HARNESS AS-CONTROL

472-2527 HARNESS AS-CONTROL

519-7988 HARNESS AS-CONSOLE

470-9270 HARNESS AS-CONSOLE

487-9664 HARNESS AS-MONITOR

487-9665 HARNESS AS-MONITOR

487-9666 HARNESS AS-MONITOR

487-9663 HARNESS AS-PANEL

355-1642 HARNESS AS-SWITCH

384-8651 HARNESS AS-WIRING

425-0289 HARNESS AS-WIRING

488-5588 HARNESS AS-WIRING