ELECTRICAL AND STARTING SYSTEM
SENSOR GPDIODE GP
WIRING GP
HARNESS GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
#M00745020490
424-2279: DETECTOR GP-OIL MIST
424-2279 DETECTOR GP-OIL MIST
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 3516C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 430-5269 | [1] | SUPPORT | |
| 2. | 2W-0752 | [1] | GASKET | |
| 3. | 6V-3527 | [4] | FITTING-FLARED | |
| 4. | 7E-9324 | [2] | MOUNT | |
| 5. | 8I-3633 | [2] | ADAPTER AS | |
| (EACH INCLUDES) | ||||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 162-6816 | [1] | SEAL | ||
| 386-6212 | [1] | ADAPTER | ||
| 6. | 9M-4594 | [4] | SPACER (0.406X0.875X0.75-IN THK) | |
| 7. | 144-0526 | [1] | REGULATOR-OIL MIST DETECTOR | |
| 8. | 155-8994 | [1] | ADAPTER AS | |
| 6V-8398 | [1] | SEAL-O-RING | ||
| 155-9644 | [1] | SEAL | ||
| 377-9591 | [1] | ADAPTER | ||
| 9. | 191-6502 | [5] | ADAPTER | |
| 10. | 192-1404 | [5] | UNION | |
| 11. | 267-5286 | [1] | FILTER GP-AIR LINES (OIL SEPARATOR) | |
| 7X-0278 | [2] | BOLT (5/16-18X4-IN) | ||
| 143-6682 | [2] | NUT-HEX (5/16-18-THD) | ||
| 360-4135 | [1] | FILTER-OIL (SEPARATOR) | ||
| 12. | 360-3692 | [3] | PLUG | |
| 13. | 368-5086 | [2] | TUBE | |
| 14. | 388-0329 | [1] | TUBE AS | |
| 15. | 388-0330 | [1] | TUBE AS | |
| 16. | 388-0331 I | [1] | HOSE AS | |
| 17. | 389-8626 | [1] | PLATE AS | |
| 18. | 389-8632 | [3] | TUBE AS | |
| 19. | 390-9164 I | [1] | HOSE AS | |
| 20. | 392-0875 | [5] | PIPE-FUNNEL | |
| 21. | 396-9872 I | [1] | HOSE AS | |
| 22. | 396-9873 I | [1] | HOSE AS | |
| 23. | 396-9874 I | [1] | HOSE AS | |
| 24. | 396-9875 I | [2] | HOSE AS | |
| 25. | 396-9876 | [1] | TUBE AS | |
| 26. | 398-1879 | [1] | BRACKET AS | |
| 27. | 398-1880 | [1] | BRACKET AS | |
| 28. | 398-1913 | [1] | BRACKET AS | |
| 29. | 398-5121 | [4] | TUBE AS | |
| 30. | 398-5209 I | [1] | HOSE AS | |
| 31. | 398-5210 | [1] | BRACKET | |
| 32. | 398-5212 I | [1] | HOSE AS | |
| 33. | 398-5214 I | [1] | HOSE AS | |
| 34. | 398-5215 I | [1] | HOSE AS | |
| 35. | 398-5216 I | [1] | HOSE AS | |
| 36. | 398-6777 | [1] | BRACKET AS | |
| 37. | 417-4686 I | [1] | HOSE AS | |
| 38. | 417-7777 | [1] | BRACKET AS | |
| 39. | 419-5012 | [1] | BRACKET AS | |
| 40. | 419-5075 | [1] | BRACKET AS | |
| 41. | 419-5110 | [1] | PLATE | |
| 42. | 419-5711 | [1] | BRACKET AS | |
| 43. | 419-6694 I | [1] | HOSE AS | |
| 44. | 425-9220 | [1] | DETECTOR (OIL MIST)(HEAD) | |
| 45. | 0L-2070 | [4] | BOLT (3/8-16X2.25-IN) | |
| 46. | 0S-1588 | [1] | BOLT (3/8-16X1.25-IN) | |
| 47. | 0S-1594 | [1] | BOLT (3/8-16X1-IN) | |
| 48. | 0S-1617 | [1] | BOLT (5/16-18X0.75-IN) | |
| 49. | 0S-1618 | [5] | BOLT (5/16-18X1-IN) | |
| 50. | 280-2651 M | [8] | SCREW-FLAT HEAD (M6X1X25-MM) | |
| 51. | 134-3987 | [1] | CLIP (LOOP) | |
| 52. | 165-3930 | [3] | BOLT (3/8-16X1.625-IN) | |
| 53. | 198-4766 | [4] | WASHER-HARD (11X25X10-MM THK) | |
| 54. | 1A-2029 | [6] | BOLT (3/8-16X1.125-IN) | |
| 55. | 165-3936 | [2] | BOLT (3/8-16X4.5-IN) | |
| 56. | 214-7568 | [2] | SEAL-O-RING | |
| 58. | 250-1416 | [2] | ELBOW | |
| 59. | 2T-2170 | [1] | ELBOW | |
| 60. | 3B-1915 | [6] | BOLT (3/8-16X1.375-IN) | |
| 61. | 3E-4352 | [8] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 62. | 3J-1907 | [12] | SEAL-O-RING | |
| 63. | 4D-7735 | [1] | CLIP | |
| 64. | 353-7952 | [4] | GROMMET | |
| 65. | 5M-2894 | [18] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 66. | 5P-7970 M | [4] | NUT (M8X1.25-THD) | |
| 67. | 5P-8245 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 68. | 5S-0003 | [3] | NUT (5/16-18-THD) | |
| 69. | 6V-0408 | [6] | SEAL-BONDED | |
| 70. | 6V-3918 M | [4] | BOLT (M8X1.25X50-MM) | |
| 71. | 6V-8397 | [24] | SEAL-O-RING | |
| 72. | 6V-8724 | [6] | ELBOW | |
| 73. | 6V-8730 | [5] | UNION (FACE SEAL) | |
| 74. | 6V-9001 | [2] | ELBOW | |
| 75. | 8B-9725 | [1] | BOSS (17/32X1X1/4-IN THK) | |
| 76. | 8L-2786 | [5] | SEAL-O-RING | |
| 77. | 8T-1897 | [4] | CLIP (SLOT) | |
| 78. | 8T-1898 | [4] | CLIP (TAB) | |
| 79. | 8T-1905 | [1] | ELBOW | |
| 80. | 8T-7877 | [2] | SEAL-O-RING | |
| 81. | 9M-1974 | [9] | WASHER-HARD (8.8X16X2-MM THK) | |
| 82. | 9S-1366 | [1] | BOLT (1/2-13X2.5-IN) | |
| 83. | 9S-8752 | [2] | NUT-FULL (3/8-16-THD) | |
| 84. | 9X-6458 | [9] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 85. | 165-3929 | [2] | BOLT (3/8-16X1.5-IN) | |
| 86. | 0L-1351 | [4] | BOLT (3/8-16X0.875-IN) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#M00745020491
7C-2668: DIODE AS
7C-2668 DIODE AS
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 3516C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#M00745020492
458-7916: FASTENER GP-WIRING HARNESS
458-7916 FASTENER GP-WIRING HARNESS
FOR USE WITH PYROMETER PANEL
CANNOT BE USED WITH PLATE TYPE HEAT EXCHANGER OR EXPANSION TANK
AN ATTACHMENT
FOR USE WITH PYROMETER PANEL
CANNOT BE USED WITH PLATE TYPE HEAT EXCHANGER OR EXPANSION TANK
AN ATTACHMENT
For full view, you need register
Parts for your 3516C MARINE ENGINE:
CATERPILLAR SIS#M00745020493
240-5872: HARNESS AS-BOX
240-5872 HARNESS AS-BOX -INTERCONNECT
3-METER
PART OF 241-5629 BOX GP-JUNCTION
AN ATTACHMENT
3-METER
PART OF 241-5629 BOX GP-JUNCTION
AN ATTACHMENT
For full view, you need register
Parts for your 3516C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 231-9899 | [1] | CONNECTOR (CONDUIT) | |
| 2. | 231-9898 | [1] | CONNECTOR (CONDUIT) | |
| 3. | 233-9217 | [1] | CONNECTOR (85-PIN) | |
| 4. | 236-8125 | [1] | ADAPTER | |
| 5. | 233-9226 | [82] | PIN-CONNECTOR (16-GA TO 20-GA) | |
| 6. | 231-9897 E | CONDUIT-FLEXIBLE (36-MM ID)(300-CM) | ||
| 7. | 236-8130 M | [1] | NUT (M40X1.5-THD) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#M00745020494
240-5874: HARNESS AS-BOX
240-5874 HARNESS AS-BOX -INTERCONNECT
10-METER
PART OF 241-5630 BOX GP-JUNCTION
AN ATTACHMENT
10-METER
PART OF 241-5630 BOX GP-JUNCTION
AN ATTACHMENT
For full view, you need register
Parts for your 3516C MARINE ENGINE:
CATERPILLAR SIS#M00745020495
240-5876: HARNESS AS-BOX
240-5876 HARNESS AS-BOX -INTERCONNECT
15-METERS
PART OF 241-5631 BOX GP-JUNCTION
AN ATTACHMENT
15-METERS
PART OF 241-5631 BOX GP-JUNCTION
AN ATTACHMENT
For full view, you need register
Parts for your 3516C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 231-9898 | [1] | CONNECTOR (CONDUIT) | |
| 2. | 231-9899 | [1] | CONNECTOR (CONDUIT) | |
| 3. | 233-9217 | [1] | CONNECTOR (85-PIN) | |
| 4. | 236-8125 | [1] | ADAPTER | |
| 5. | 5P-5677 D | WIRE (18-GA, BLACK)(891.6-M) | ||
| 6. | 233-9226 | [82] | PIN-CONNECTOR (16-GA TO 20-GA) | |
| 7. | 231-9897 E | CONDUIT-FLEXIBLE (36-MM ID)(1503-CM) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#M00745020496
314-4213: HARNESS AS-BOX
314-4213 HARNESS AS-BOX -POWER DISTRIBUTION
PART OF 231-9999 BOX GP-JUNCTION
AN ATTACHMENT
PART OF 231-9999 BOX GP-JUNCTION
AN ATTACHMENT
For full view, you need register
Parts for your 3516C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 233-9221 | [1] | CONNECTOR AS (31-PIN) | |
| 2. | 233-9219 | [1] | CONNECTOR (31-PIN) | |
| 3. | 203-8977 | [2] | RECEPTACLE AS (6-PIN) | |
| (EACH INCLUDES) | ||||
| 159-9496 | [1] | LOCKWASHER | ||
| 203-9000 | [1] | PLUG AS (6-PIN) | ||
| 203-8999 | [2] | SEAL | ||
| 203-9001 | [2] | SLEEVE | ||
| 203-9007 | [1] | NUT (1-1/2-18-THD) | ||
| 4. | 233-9494 E | CONDUIT (47-MM OD)(45-CM) | ||
| 5. | 231-9897 E | CONDUIT-FLEXIBLE (36-MM ID)(68-CM) | ||
| 5A. | 231-9897 E | CONDUIT-FLEXIBLE (36-MM ID)(78-CM) | ||
| 6. | 123-0316 | [2] | DIODE AS | |
| (EACH INCLUDES) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-5494 | [2] | DIODE-RECTIFIER | ||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 7. | 231-9899 | [2] | CONNECTOR (CONDUIT) | |
| 8. | 233-9495 | [1] | CONNECTOR (CONDUIT) | |
| 9. | 233-9517 | [1] | GASKET | |
| 10. | 236-7942 | [1] | PLATE | |
| 11. | 241-8266 | [2] | ADAPTER | |
| 12. | [1] | ADAPTER | ||
| 13. | 121-0200 E | WRAP-SPIRAL (3/4-IN OD)(6-CM EACH) | ||
| 155-2271 F | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 3T-5433 F | [3] | WIRE AS (1O-GA, BLACK) | ||
| -OR- | ||||
| 130-6797 F | [3] | WIRE AS (14-GA, BLACK) | ||
| 5E-9295 F | [4] | PIN-CONNECTOR (6-GA) | ||
| 8T-8730 F | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 114-8843 EF | SLEEVE-PLASTIC (40-CM) | |||
| 125-7874 EF | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 159-9496 F | [2] | LOCKWASHER | ||
| 8T-8737 F | [8] | PLUG-SEAL | ||
| 2L-8050 F | [7] | TERMINAL-RING (6-GA, 1/4-IN SCREW) | ||
| -OR- | ||||
| 2L-8058 F | [7] | TERMINAL-RING (8-GA, 1/4-IN SCREW) | ||
| 2L-8067 F | [17] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 5P-4571 F | [47] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 5P-5618 F | [5] | TERMINAL-BLADE (10-GA TO 12-GA) | ||
| 233-9235 F | [20] | PLUG-SEAL | ||
| 233-9228 F | [3] | PLUG-SEAL | ||
| 203-9007 F | [2] | NUT (1-1/2-18-THD) | ||
| 203-9001 F | [4] | SLEEVE | ||
| 203-8999 F | [4] | SEAL | ||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
#M00745020497
249-6964: HARNESS AS-CONTROL
249-6964 HARNESS AS-CONTROL -MARINE POWER DISPLAY
PART OF 249-6961, 257-7948, 381-4167 PANEL GP-PILOT HOUSE INSTR
AN ATTACHMENT
PART OF 249-6961, 257-7948, 381-4167 PANEL GP-PILOT HOUSE INSTR
AN ATTACHMENT
For full view, you need register
Parts for your 3516C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 109-3038 | [24] | END-WIRE (16-GA) | ||
| 110-8714 | [6] | END-WIRE (18-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 174-3016 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 7X-6222 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8558 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3265 | [2] | SEAL-CONNECTOR (24-PIN) | ||
| 8T-8737 | [9] | PLUG-SEAL | ||
| 133-0970 | [1] | RECEPTACLE AS-CONNECTOR (TEE) | ||
| 8T-8730 | [34] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| M | METRIC PART | |||
#M00745020498
270-1732: HARNESS AS-CONTROL
270-1732 HARNESS AS-CONTROL -PL1000T
FOR USE WITH @@@@@256-7511@@@@@
AN ATTACHMENT
FOR USE WITH @@@@@256-7511@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 3516C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 257-2719 | [1] | PLUG AS | ||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 8T-8735 | [1] | PLUG-CONNECTOR | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 9X-6772 | [2] | STRAP-CABLE | ||
| 218-4935 | [2] | SUPPRESSOR-ARC | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 3E-3377 | [1] | WEDGE-RECEPTACLE LOCK (4-PIN) | ||
| E | ORDER BY THE CENTIMETER | |||
#M00745020499
276-0785: HARNESS AS-CONTROL
276-0785 HARNESS AS-CONTROL -PL1000E
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 3516C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG ASSEMBLY & WEDGE) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE ASSEMBLY & WEDGE) | ||||
| 171-5349 | [1] | STRAP-MARKER | ||
| 186-3735 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 257-2719 | [1] | PLUG AS | ||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 8T-8735 | [1] | PLUG-CONNECTOR | ||
| 8T-8737 | [65] | PLUG-SEAL | ||
| 9W-1951 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 186-3736 | [10] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1768 | [14] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 9X-6772 | [2] | STRAP-CABLE | ||
| 218-4935 | [2] | SUPPRESSOR-ARC | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
Information:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Operation and Maintenance Manual
Engine Speed/Timing Sensor - Clean/Inspect
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines
Special Instruction
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Alarm and Protection Field Test Procedure for Certain Marine Engines {0374, 0599, 0706, 0708, 0709, 0769, 0781, 1000, 1408, 1439}
Alarm and Protection Field Test Procedure for Certain Marine Engines {0374, 0599, 0706, 0708, 0709, 0769, 0781, 1000, 1408, 1439}
Alarm and Protection Field Test Procedure for Certain Marine Engines {0374, 0599, 0706, 0708, 0709, 0769, 0781, 1000, 1408, 1439}
Specifications
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
