AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

445-6262 FENDER & COVER GP S/N TGJ1-UP; XAN1-UP PART OF 466-7691, 518-8165, 518-8166 CHASSIS AR 320D2


FRAME AND BODY
FENDER GP
FRAME GP
GEAR & BEARING GP
GUARD GP
HANDRAIL GP
ENCLOSURE GP

EXCAVATOR 320D2 EXCAVATOR TGJ
 320D2 & 320D2 L Excavators TGJ00001-UP (MACHINE) POWERED BY C7.1 Engine M0074824 320D2 TGJ   (2016)

FRAME AND BODY

FENDER GP
FENDER & COVER GP
445-6262 FENDER & COVER GP
 

#M00748240170
 

445-6262: FENDER & COVER GP

445-6262 FENDER & COVER GP
S/N TGJ1-UP; XAN1-UP
PART OF 466-7691, 518-8165, 518-8166 CHASSIS AR
i05459830 M0074824
4456262 FENDER & COVER GP Parts scheme
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-8573 [2] BOLT AS  
2. 236-3702 [2] SPACER (15X35X11-MM THK)  
3. 236-3703 [2] WASHER (25X35X4-MM THK)  
4. 259-3543 [1] STEP AS  
5. 445-6263 [1] COVER AS  
  6C-3679 [8] RIVET-POP  
  278-3818 [1] LINER  
6. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
7. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
 

#M00748240171
 

463-8803: FRAME GP-UPPER

463-8803 FRAME GP-UPPER
S/N TGJ1-UP; XAN1-UP
PART OF 507-3182, 507-3183, 507-3187, 507-3188, 512-0944, 512-0945 DISTRIBUTION AR
i06754587 M0074824
4638803 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-0083 B [4] SHIM (1-MM THK)  
2. 093-0115 B [2] SHIM (2-MM THK)  
3. 093-0349 [3] WASHER (22X60X6-MM THK)  
4. 093-0363 [2] SPACER (83X120X12-MM THK)  
5. 133-2425 B [2] SHIM (0.5-MM THK)  
6. 4I-4812 [2] PIN AS  
7. 212-2838 [2] SHIM (2-MM THK)  
8. 245-7900 J [1] CAP  
9. 245-7901 J [1] CAP  
10. 308-8775 B [1] SHIM (0.5-MM THK)  
11. 308-8776 B [2] SHIM (1-MM THK)  
12. 308-8777 B [1] SHIM (2-MM THK)  
13. 315-0800 [1] PIN AS  
14. 451-2176 [3] WASHER-HARD (22X35X3.5-MM THK)  
15. 463-8804 [1] FRAME AS-UPPER  
15A. 7Y-0633 [1] BOSS  
15B. 163-3729 [1] STEP AS  
16. 453-2844 M [3] BOLT (M20X2.5X30-MM)  
  B   USE AS REQUIRED
  J   USE ONLY MACHINE WITHOUT LOWER WIPER
  M   METRIC PART
 

#M00748240172
 

227-6081: GEAR & BEARING GP-SWING

227-6081 GEAR & BEARING GP-SWING
S/N TGJ1-UP; XAN1-UP
PART OF 227-6147 GEAR & BEARING GP-SWING
i02176382 M0074824
2276081 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 227-6071 [1] SEAL-DUST  
3. 148-4685 E SEAL (368-CM)  
  E   ORDER BY THE CENTIMETER
 

#M00748240173
 

227-6147: GEAR & BEARING GP-SWING

227-6147 GEAR & BEARING GP-SWING
S/N TGJ1-UP; XAN1-UP
PART OF 240-3822, 247-7454 FRAME AR-UNDERCARRIAGE
i02768511 M0074824
2276147 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-9243 [2] ELBOW-FLARED  
2. 7Y-1647 [1] GASKET  
3. 7Y-1650 [1] CLAMP-HOSE  
4. 468-5306 [40] SPACER (20.5X38X34-MM THK)  
5. 148-4689 [1] TUBE AS  
6. 171-9464 [37] SPACER (20.6X38X6-MM THK)  
7. 227-6081 Y [1] GEAR & BEARING GP-SWING  
8. 227-6105 [1] BOOT  
9. 227-6106 [1] RETAINER  
10. 096-4902 [1] DOWEL  
11. 148-4703 [1] COVER  
12. 148-4704 [1] GASKET  
13. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
14. 4N-9170 [2] CLIP (LOOP)  
15. 7Y-1648 [1] STRIP  
16. 145-9278 M [40] BOLT (M20X2.5X90-MM)  
17. 5Q-3560 M [37] BOLT (M20X2.5X110-MM)  
18. 453-3454 [14] WASHER-HARD (11X21X2.5-MM THK)  
19. 457-8759 M [2] BOLT (M10X1.5X20-MM)  
20. 455-3798 M [12] BOLT (M10X1.5X25-MM)  
21. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00748240174
 

374-4017: GUARD GP-BOTTOM

374-4017 GUARD GP-BOTTOM
S/N TGJ1-UP; XAN1-UP
PART OF 466-7691, 518-8165, 518-8166 CHASSIS AR
i05268410 M0074824
3744017 GUARD GP-BOTTOM Parts scheme
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-8576 [36] BOLT AS-LOCKING  
2. 165-2823 [1] SHEET  
3. 248-8992 [1] SHEET  
4. 421-3762 [1] SHEET  
5. 248-8994 [1] SHEET  
    -OR-
  342-0932 J [1] SHEET AS  
6. 248-8995 [1] SHEET  
7. 377-6715 [2] SHEET  
8. 461-0414 [1] SHEET AS  
9. 289-6603 [1] SHEET  
10. 342-0965 J [1] PLATE AS  
11. 8C-8992 JM [2] BOLT-LOCKING (M12X1.75X30-MM)  
12. 5P-1076 J [2] WASHER-HARD (13.5X30X4-MM THK)  
  J   OPTIONAL DESIGN FOR COLD WEATHER APPLICATIONS
  M   METRIC PART
 

#M00748240175
 

374-4019: GUARD GP-BOTTOM

374-4019 GUARD GP-BOTTOM -HEAVY-DUTY
S/N TGJ1-UP; XAN1-UP
PART OF 456-1154 OPTION AR-GUARD
i05354138 M0074824
3744019 GUARD GP-BOTTOM Parts scheme
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-8576 [2] BOLT AS-LOCKING  
2. 355-8007 [1] SHEET AS  
3. 355-8008 [1] SHEET AS  
4. 423-5186 C [1] SHEET AS  
5. 355-8010 [1] PLATE AS  
6. 355-8013 [1] SHEET AS  
7. 355-8014 [1] SHEET AS  
8. 377-6679 [1] SHEET AS  
9. 377-6681 [1] SHEET AS  
10. 377-6716 [2] SHEET AS  
  C   CHANGE FROM PREVIOUS TYPE
 

#M00748240176
 

134-8875: GUARD GP-SWIVEL

134-8875 GUARD GP-SWIVEL
S/N TGJ1-UP; XAN1-UP
PART OF 456-1154 OPTION AR-GUARD
i02943373 M0074824
1348875 GUARD GP-SWIVEL Parts scheme
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 134-8876 [1] PLATE AS  
2. 134-8878 [1] PLATE AS  
3. 8C-8992 M [5] BOLT-LOCKING (M12X1.75X30-MM)  
4. 5P-1076 [5] WASHER-HARD (13.5X30X4-MM THK)  
  M   METRIC PART
 

#M00748240177
 

142-3835: HANDRAIL GP

142-3835 HANDRAIL GP
S/N TGJ1-UP; XAN1-UP
PART OF 466-7691, 518-8165, 518-8166 CHASSIS AR
i01355534 M0074824
1423835 HANDRAIL GP Parts scheme
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
2. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
3. 177-5880 [2] SLEEVE  
4. 177-5879 [1] CLAMP  
5. 177-5877 [1] HANDHOLD AS  
6. 135-8578 [3] BOLT AS  
  M   METRIC PART
 

#M00748240178
 

464-1225: HOOD & GUARD GP

464-1225 HOOD & GUARD GP
S/N TGJ1-10000
PART OF 466-7691 CHASSIS AR
i06674803 M0074824
4641225 HOOD & GUARD GP Parts scheme 4641225 HOOD & GUARD GP Parts scheme 4641225 HOOD & GUARD GP Parts scheme
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-0118 [2] HOOK AS  
2. 4I-0232 [2] STRIKER  
3. 4I-8019 [3] SUPPORT  
4. 6I-6033 [3] STOP  
5. 7Y-2853 [8] SPACER (13X38X5-MM THK)  
6. 087-3908 [4] SHIM (1-MM THK)  
7. 087-3909 [4] SHIM (2-MM THK)  
8. 122-3979 [1] BAND  
9. 122-3980 [1] ROD  
10. 122-4120 [3] ROD  
11. 170-3016 [15] SPACER (19X32X2-MM THK)  
12. 190-6880 [3] SUPPORT AS  
13. 244-8228 [1] SUPPORT AS  
14. 244-8255 [1] SUPPORT AS  
15. 262-2363 [1] SHEET AS-SOUND SUPPRESSION  
  262-2365 [1] LINER  
16. 289-6698 [1] SUPPORT AS  
  129-3400 [1] GUARD  
  244-8198 [1] LINER  
17. 377-6667 Y [1] SHEET AS-SOUND SUPPRESSION  
18. 377-6708 Y [1] SHEET AS-SOUND SUPPRESSION  
19. 379-7425 Y [1] SUPPORT AS-SOUND SUPPRESSION  
20. 379-7518 [1] SUPPORT AS  
21. 391-4751 [1] COVER AS  
22. 391-9646 Y [1] SHEET AS-SOUND SUPPRESSION  
23. 391-9651 [1] SHEET AS-SOUND SUPPRESSION  
24. 391-9655 [1] SUPPORT AS  
25. 392-1262 [1] SPRING AS-GAS (ENGINE HOOD)  
26. 396-3542 [1] SUPPORT AS  
27. 396-3569 [1] SHEET AS  
28. 396-8523 Y [1] SHEET AS-SOUND SUPPRESSION  
29. 396-9388 Y [1] COVER AS-SOUND SUPPRESSION (FUEL, HYDRAULIC TANKS)  
30. 480-2251 CY [1] SUPPORT AS-SOUND SUPPRESSION  
31. 421-4416 Y [1] DOOR GP-ACCESS (RADIATOR)  
32. 422-5388 Y [1] DOOR AS-ACCESS (AIR CLEANER, BATTERY)  
33. 425-6092 Y [1] DOOR GP-ACCESS (PUMP COMPARTMENT)  
34. 428-5842 Y [1] SHEET AS-SOUND SUPPRESSION  
35. 431-0101 Y [1] SHEET AS-SOUND SUPPRESSION  
36. 431-0102 [1] SUPPORT AS  
37. 431-0103 [1] SHEET AS  
38. 451-4079 [1] COVER AS  
39. 451-4098 [1] COVER AS  
40. 451-4099 [1] SUPPORT AS  
41. 451-4100 Y [1] SUPPORT AS-ENCLOSURE  
42. 451-5170 Y [1] SHEET AS-SOUND SUPPRESSION  
43. 451-5175 [1] SUPPORT AS  
44. 455-4063 [1] SUPPORT AS  
45. 466-1052 Y [1] HOOD GP-ENGINE  
46. 466-1054 [1] COVER AS  
  190-7081 [2] SHEET  
  466-7735 [1] COVER AS  
47. 105-3487 M [6] BOLT-SOCKET HEAD (M6X1X20-MM)  
48. 114-6285 [2] BAR  
49. 135-8573 [67] BOLT AS  
50. 135-8575 [34] BOLT AS  
51. 135-8577 [4] BOLT AS  
52. 135-8578 [6] BOLT AS  
53. 3B-4618 [3] PIN-COTTER  
54. 5C-7261 M [1] NUT (M8X1.25-THD)  
55. 5C-9553 M [8] BOLT (M6X1X16-MM)  
56. 5P-0372 [1] LOCK PIN  
57. 5P-4115 [10] WASHER-HARD (7.2X19X2-MM THK)  
58. 7F-3708 [1] PIN  
59. 7Y-2854 [8] SPACER (24X38X3-MM THK)  
60. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
61. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
62. 8T-4138 M [10] BOLT (M6X1X20-MM)  
63. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
64. 8T-4224 [5] WASHER-HARD (8.8X16X2-MM THK)  
65. 9X-8256 [14] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00748240179
 

518-8067: HOOD & GUARD GP

518-8067 HOOD & GUARD GP
S/N TGJ10001-UP; XAN1-UP
PART OF 518-8165, 518-8166 CHASSIS AR
i06861732 M0074824
5188067 HOOD & GUARD GP Parts scheme 5188067 HOOD & GUARD GP Parts scheme
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-0118 [2] HOOK AS  
2. 4I-0232 [2] STRIKER  
3. 4I-8019 [3] SUPPORT  
4. 6I-6033 [3] STOP  
5. 7Y-2853 [8] SPACER (13X38X5-MM THK)  
6. 087-3908 [4] SHIM (1-MM THK)  
7. 087-3909 [4] SHIM (2-MM THK)  
8. 122-3979 [1] BAND  
9. 122-3980 [1] ROD  
10. 122-4120 [3] ROD  
11. 170-3016 [15] SPACER (19X32X2-MM THK)  
12. 190-6880 [3] SUPPORT AS  
13. 244-8228 [1] SUPPORT AS  
14. 244-8242 [1] SUPPORT AS  
15. 244-8255 [1] SUPPORT AS  
16. 262-2363 [1] SHEET AS-SOUND SUPPRESSION  
  262-2365 [1] LINER  
17. 289-6698 [1] SUPPORT AS  
  129-3400 [1] GUARD  
  244-8198 [1] LINER  
18. 289-6805 [1] SUPPORT AS-ENCLOSURE  
19. 377-6667 Y [1] SHEET AS-SOUND SUPPRESSION  
20. 377-6698 Y [1] SUPPORT AS-ENCLOSURE  
21. 377-6708 Y [1] SHEET AS-SOUND SUPPRESSION  
22. 377-6786 [1] COVER AS  
23. 379-7425 Y [1] SUPPORT AS-SOUND SUPPRESSION  
24. 379-7518 [1] SUPPORT AS  
  7T-1099 [8] LINK  
  8T-3597 M [7] NUT-WELD (M12X1.75-THD)  
  087-5841 [1] PLATE  
  121-1029 [1] CLIP  
25. 391-4751 [1] COVER AS  
26. 391-9646 Y [1] SHEET AS-SOUND SUPPRESSION  
27. 391-9651 [1] SHEET AS-SOUND SUPPRESSION  
28. 391-9655 [1] SUPPORT AS  
29. 392-1262 [1] SPRING AS-GAS (ENGINE HOOD)  
30. 396-3542 [1] SUPPORT AS  
31. 396-3569 [1] SHEET AS  
32. 396-8523 Y [1] SHEET AS-SOUND SUPPRESSION  
33. 399-0819 Y [1] COVER AS-SOUND SUPPRESSION (FUEL, HYDRAULIC TANKS)  
34. 419-3368 Y [1] SHEET AS-SOUND SUPPRESSION  
35. 421-4416 Y [1] DOOR GP-ACCESS (RADIATOR)  
36. 422-5388 Y [1] DOOR AS-ACCESS (AIR CLEANER, BATTERY)  
37. 425-6092 Y [1] DOOR GP-ACCESS (PUMP COMPARTMENT)  
38. 428-5842 Y [1] SHEET AS-SOUND SUPPRESSION  
39. 431-0101 Y [1] SHEET AS-SOUND SUPPRESSION  
40. 431-0102 [1] SUPPORT AS  
41. 431-0103 [1] SHEET AS  
42. 451-4079 [1] COVER AS  
43. 451-5175 [1] SUPPORT AS  
44. 466-1052 Y [1] HOOD GP-ENGINE  
45. 466-1054 [1] COVER AS  
  190-7081 [2] SHEET  
  466-7735 [1] COVER AS  
46. 480-2251 Y [1] SUPPORT AS-SOUND SUPPRESSION  
47. 518-8072 [1] COVER AS  
48. 105-3487 M [6] BOLT-SOCKET HEAD (M6X1X20-MM)  
49. 114-6285 [2] BAR  
50. 135-8573 [67] BOLT AS  
51. 135-8575 [34] BOLT AS  
52. 135-8577 [4] BOLT AS  
53. 135-8578 [6] BOLT AS  
54. 3B-4618 [3] PIN-COTTER  
55. 5C-7261 M [1] NUT (M8X1.25-THD)  
56. 5C-9553 M [8] BOLT (M6X1X16-MM)  
57. 5P-0372 [1] LOCK PIN  
58. 5P-4115 [10] WASHER-HARD (7.2X19X2-MM THK)  
59. 7F-3708 [1] PIN  
60. 7Y-2854 [8] SPACER (24X38X3-MM THK)  
61. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
62. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
63. 8T-4138 M [10] BOLT (M6X1X20-MM)  
64. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
65. 8T-4224 [5] WASHER-HARD (8.8X16X2-MM THK)  
66. 9X-8256 [14] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 320D2 :

DOOR GP-ACCESS
425-6092 DOOR GP-ACCESS
DOOR GP-ACCESS
421-4416 DOOR GP-ACCESS
DOOR AS-ACCESS
422-5388 DOOR AS-ACCESS
COVER GP-HOOD
518-8076 COVER GP-HOOD
COVER AS-SOUND SUPPRESSION
399-0819 COVER AS-SOUND SUPPRESSION
COVER AS-SOUND SUPPRESSION
396-9388 COVER AS-SOUND SUPPRESSION
COVER AS
518-8077 COVER AS
COUNTERWEIGHT GP
525-3738 COUNTERWEIGHT GP
FRAME GP-UPPER
463-8803 FRAME GP-UPPER
GEAR & BEARING GP-SWING
227-6081 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
227-6147 GEAR & BEARING GP-SWING
GUARD GP-BOTTOM
374-4017 GUARD GP-BOTTOM
GUARD GP-BOTTOM
374-4019 GUARD GP-BOTTOM
GUARD GP-SWIVEL
134-8875 GUARD GP-SWIVEL
HANDRAIL GP
142-3835 HANDRAIL GP
HOOD & GUARD GP
464-1225 HOOD & GUARD GP

Truck sale:

Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
THE CHINA ENGINEERS, LTD
Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
PESA
Caterpillar 320D2, Construction
On Request 
Caterpillar 320D2, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 320D2, Construction
139,000 USD 
Caterpillar 320D2, Construction
- Crawler Excavators
EMPRESAS MATCO, S.A. DE C.V.
Mexico
CATERPILLAR 320D2 2014
 
CATERPILLAR 320D2 2014
- TRACK EXCAVATORS
PESA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.