WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)RIPPER GP
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
#M00753920790
507-2922: EDGE GP-BIT & CUTTING
507-2922 EDGE GP-BIT & CUTTING
S/N JR81-UP
35-MM (1.4-IN) THICK. EXTENDED WEAR
FOR USE WITH ANGLE BLADE
FIELD INSTALLATION
S/N JR81-UP
35-MM (1.4-IN) THICK. EXTENDED WEAR
FOR USE WITH ANGLE BLADE
FIELD INSTALLATION
For full view, you need register
#M00753920791
507-2923: EDGE GP-BIT & CUTTING
507-2923 EDGE GP-BIT & CUTTING -GENERAL DUTY
S/N JR81-UP
28-MM (1.2-IN) THICK. ABRASIVE RESISTANT MATERIAL
FOR USE WITH SEMI-UNIVERSAL BLADES
FIELD INSTALLATION
S/N JR81-UP
28-MM (1.2-IN) THICK. ABRASIVE RESISTANT MATERIAL
FOR USE WITH SEMI-UNIVERSAL BLADES
FIELD INSTALLATION
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS#M00753920792
507-2924: EDGE GP-BIT & CUTTING
507-2924 EDGE GP-BIT & CUTTING
S/N JR81-UP
28.5-MM (1.2-IN) THICK. LEVEL CUT
FOR USE WITH UNIVERSAL BLADES
FIELD INSTALLATION
S/N JR81-UP
28.5-MM (1.2-IN) THICK. LEVEL CUT
FOR USE WITH UNIVERSAL BLADES
FIELD INSTALLATION
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS#M00753920793
507-2925: EDGE GP-BIT & CUTTING
507-2925 EDGE GP-BIT & CUTTING
S/N JR81-UP
45-MM (1.8-IN) THICK. UTILITY
FOR USE WITH UNIVERSAL BLADES
FIELD INSTALLATION
S/N JR81-UP
45-MM (1.8-IN) THICK. UTILITY
FOR USE WITH UNIVERSAL BLADES
FIELD INSTALLATION
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS#M00753920794
507-2926: EDGE GP-BIT & CUTTING
507-2926 EDGE GP-BIT & CUTTING
S/N JR81-UP
HOT CUPPED. 28-MM (1.2-IN) THICK
FOR USE WITH UNIVERSAL BLADES
FIELD INSTALLATION
S/N JR81-UP
HOT CUPPED. 28-MM (1.2-IN) THICK
FOR USE WITH UNIVERSAL BLADES
FIELD INSTALLATION
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS#M00753920795
507-2927: EDGE GP-BIT & CUTTING
507-2927 EDGE GP-BIT & CUTTING
S/N JR81-UP
HOT CUPPED. 35-MM (1.4-IN) THICK
FOR USE WITH UNIVERSAL BLADES
FIELD INSTALLATION
S/N JR81-UP
HOT CUPPED. 35-MM (1.4-IN) THICK
FOR USE WITH UNIVERSAL BLADES
FIELD INSTALLATION
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS#M00753920796
522-3987: EDGE GP-BIT & CUTTING
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 479-8129 | [1] | BIT-END (RH) | |
| 2. | 479-8130 | [1] | BIT-END (LH)(LH) | |
| 3. | [1] | EDGE-CUTTING (RH) | ||
| 4. | 479-8132 | [1] | EDGE-CUTTING (LH) | |
| 5. | 522-3986 | [1] | EDGE-CUTTING (CENTER) | |
| 6. | 2J-3507 | [37] | NUT-FULL (1-8-THD) | |
| 7. | 4J-9058 | [37] | BOLT-PLOW (1-8X3.25-IN) | |
| 8. | 5P-8250 | [37] | WASHER (28X49X5-MM THK) | |
#M00753920797
7T-5559: EDGE GP-BIT & CUTTING
7T-5559 EDGE GP-BIT & CUTTING
S/N A791-UP
PART OF 489-7368, 489-7392, 489-7395, 510-8581, 510-8582, 510-8587 BLADE & EDGE GP-UNIVERSAL
AN ATTACHMENT
S/N A791-UP
PART OF 489-7368, 489-7392, 489-7395, 510-8581, 510-8582, 510-8587 BLADE & EDGE GP-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS#M00753920798
1U-4930: EDGE-CUTTING
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#M00753920799
331-5072: FRAME GP-RIPPER
331-5072 FRAME GP-RIPPER -SINGLE SHANK
S/N CX21-UP
PART OF 385-2711, 473-3234 RIPPER AR
AN ATTACHMENT
S/N CX21-UP
PART OF 385-2711, 473-3234 RIPPER AR
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-0990 | [4] | PIN | |
| 2. | 4T-1389 | [2] | PIN AS | |
| 3. | 4T-3522 B | [16] | WASHER (95X170X3-MM THK) | |
| 4. | 6J-9482 | [2] | PIN AS | |
| 5. | 6V-9313 | [2] | PLUG | |
| 6. | 7T-7305 | [6] | PLATE | |
| 7. | 132-7994 | [2] | PIN AS | |
| 8. | 329-2444 | [1] | FRAME & BEARING AS | |
| 8A. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 8B. | 4T-9751 | [4] | BUSHING | |
| 8C. | 7T-3746 | [4] | BUSHING | |
| 9. | 3E-6756 | [16] | SEAL-LIP TYPE | |
| 10. | 3E-6757 | [8] | SEAL-LIP TYPE | |
| 11. | 483-0424 M | [4] | LOCKNUT (M20X2.5-THD) | |
| 12. | 7X-2568 M | [4] | BOLT (M20X2.5X180-MM) | |
| 13. | 8T-5460 M | [12] | BOLT (M20X2.5X40-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
