GENERATORS
GENERATOR GPGENERATORS
GENERATOR GP
#M00765400560
278-7682: EXCITER GP
278-7682 EXCITER GP -PERMANENT MAGNET
S/N G2D1-UP
PART OF 279-6764 CONVERSION GP-GENERATOR, 252-3887, 252-3889, 461-0785, 553-3965 GENERATOR GP
ALSO AN ATTACHMENT
S/N G2D1-UP
PART OF 279-6764 CONVERSION GP-GENERATOR, 252-3887, 252-3889, 461-0785, 553-3965 GENERATOR GP
ALSO AN ATTACHMENT
For full view, you need register
Parts for your G3512H GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 108-5749 | [1] | ROTOR (MAGNETIC) | |
| 2. | 253-3525 | [1] | STATOR AS-MAGNET | |
| 9W-0844 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 3. | 278-7684 | [1] | RING | |
| 4. | 304-4230 | [1] | WASHER-SPECIAL | |
| 5. | 2W-9499 M | [4] | BOLT (M6X1X40-MM) | |
| 6. | 6V-5219 M | [4] | BOLT (M8X1.25X40-MM) | |
| 7. | 8S-9093 | [1] | BOLT (1-8X2.25-IN) | |
| 8. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#M00765400561
513-3234: EXCITER GP
For full view, you need register
#M00765400562
519-0685: EXCITER GP
For full view, you need register
Parts for your G3512H GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 519-0686 | [1] | EXCITER AS | |
| 112-8293 M | [4] | BOLT-FLANGE HEAD (M8X1.25X30-MM) | ||
| 513-3236 | [1] | COVER | ||
| 513-3237 | [1] | FRAME | ||
| 513-3238 | [1] | ROTOR AS | ||
| 2. | 519-0687 | [1] | COUPLING AS | |
| 519-0688 | [1] | ADAPTER | ||
| 519-0689 | [1] | SLEEVE | ||
| 519-0690 | [1] | COUPLING | ||
| 519-0691 | [1] | COUPLING | ||
| 3. | 519-0692 | [1] | FLANGE | |
| 4. | 519-0693 | [1] | PLATE | |
| M | METRIC PART | |||
#M00765400563
252-3884: GENERATOR AR
For full view, you need register
Parts for your G3512H GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3883 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [3] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [1] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00765400564
252-3886: GENERATOR AR
For full view, you need register
Parts for your G3512H GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3885 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [3] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [1] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00765400565
252-3888: GENERATOR AR
For full view, you need register
Parts for your G3512H GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3887 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [3] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [1] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00765400566
252-3890: GENERATOR AR
For full view, you need register
Parts for your G3512H GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3889 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [3] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [1] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00765400567
461-0784: GENERATOR AR
For full view, you need register
Parts for your G3512H GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 461-0783 Y | [1] | GENERATOR GP | ||
| 7W-5893 | [4] | FILM-INFORMATION (GENERATOR LIFTING) | ||
| INSTALL ONE DIRECTLY ABOVE EACH LIFTING HOLE ON GENERATOR BARREL. | ||||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, APPROX. 100MM DOWN FROM THE | ||||
| CENTER LINE AT THE TOP OF THE GENERATOR. (INSTALL FILM ON THE BARREL COVER IF AVAILABLE.) INSTALL CLEAR LAMINATE | ||||
| OVER FILM. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM, & ONE FILM | ||||
| ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, IF THE GENERATOR IS EQUIPPED WITH CIRCUIT | ||||
| BREAKER ON EITHER SIDE, MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILM'S ON EACH SIDE THE BARREL FROM FRONT TO REAR, & ON THE RH SIDE, | ||||
| CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 229-5047 | [3] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, CENTERED AT THE TOP OF THE TERMINAL BOX BELOW | ||||
| THE CATERPILLAR DECAL, & ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE MOVE FILM ABOVE THE BREAKER COVER | ||||
| CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| 303-3433 | [1] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE | ||||
| LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE LOWER TERMINAL BOX | ||||
| COVER, ALIGN EACH FILM WITH THE EDGES OF THE COVER. IF THERE IS A CIRCUIT BREAKER MOVE FILM TO THE BOTTOM OF THE COVER | ||||
| BELOW THE CIRCUIT BREAKER, ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00765400568
461-0786: GENERATOR AR
For full view, you need register
Parts for your G3512H GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 461-0785 Y | [1] | GENERATOR GP | ||
| 7W-5893 | [4] | FILM-INFORMATION (GENERATOR LIFTING) | ||
| INSTALL ONE DIRECTLY ABOVE EACH LIFTING HOLE ON GENERATOR BARREL. | ||||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, APPROX. 100MM DOWN FROM THE | ||||
| CENTER LINE AT THE TOP OF THE GENERATOR. (INSTALL FILM ON THE BARREL COVER IF AVAILABLE.) INSTALL CLEAR LAMINATE | ||||
| OVER FILM. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM, & ONE FILM | ||||
| ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, IF THE GENERATOR IS EQUIPPED WITH CIRCUIT | ||||
| BREAKER ON EITHER SIDE, MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILM'S ON EACH SIDE THE BARREL FROM FRONT TO REAR, & ON THE RH SIDE, | ||||
| CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 229-5047 | [3] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, CENTERED AT THE TOP OF THE TERMINAL BOX BELOW | ||||
| THE CATERPILLAR DECAL, & ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE MOVE FILM ABOVE THE BREAKER COVER | ||||
| CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| 303-3433 | [1] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE | ||||
| LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE LOWER TERMINAL BOX | ||||
| COVER, ALIGN EACH FILM WITH THE EDGES OF THE COVER. IF THERE IS A CIRCUIT BREAKER MOVE FILM TO THE BOTTOM OF THE COVER | ||||
| BELOW THE CIRCUIT BREAKER, ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00765400569
467-8522: GENERATOR AR
For full view, you need register
Parts for your G3512H GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 467-8521 Y | [1] | GENERATOR GP | ||
| 228-4798 | [2] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. ****** USE AS REQUIRED ****** | ||||
| 303-3428 | [1] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, CENTERED AT THE TOP OF THE REAR PANEL. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE LOWER TERMINAL BOX COVER, ALIGN EACH FILM WITH THE EDGES OF THE COVER. ***IF THERE IS A CIRCUIT BREAKER*** MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER, ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. (INSTALL FILM ON THE BARREL COVER IF AVAILABLE.) INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 225-3224 | [2] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE RH AND LH SIDES OF THE GENERATOR TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. IF THERE IS NO BARREL COVER, CENTER FILM'S ON EACH SIDE THE BARREL FROM FRONT TO REAR, AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [2] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE RH AND LH SIDES OF THE GENERATOR TERMINAL BOX, CENTERED ABOVE THE AUTO START WARNING. | ||||
| Y | SEPARATE ILLUSTRATION | |||
Information:
GENERATORS
GENERATOR GP
Special Instruction
Grounding Design Guide for Electric Power Generation Products {4450, 4459}
Grounding Design Guide for Electric Power Generation Products {4450, 4459}
Grounding Design Guide for Electric Power Generation Products {4450, 4459}
Instructions for Installing AssetIQ<SUP>TM</SUP> for Commercial Generator Set Systems on Caterpillar and non-Caterpillar Products {4450, 7490}
Instructions for Installing AssetIQTM for Commercial Generator Set Systems on Caterpillar and non-Caterpillar Products {4450, 7490}
Instructions for Installing AssetIQTM for Commercial Generator Set Systems on Caterpillar and non-Caterpillar Products {4450, 7490}
Specifications
Systems Operation
Testing and Adjusting
Disassembly and Assembly
