AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

385-2834 CYLINDER & SEAL GP-BUCKET S/N LCY1-UP 100-MM (3.9-IN) BORE X 939-MM (36.9-IN) STROKE PART OF 385-2832 CYLINDER & LINES GP-BUCKET 313D2


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
FILTER GP

EXCAVATOR 313D2 EXCAVATOR LCY
 313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine M0076736 313D2 LCY   (2016)

HYDRAULIC SYSTEM

CYLINDER GP
385-2825 CYLINDER & LINES GP-BOOM
385-2826 CYLINDER & LINES GP-BOOM
385-2832 CYLINDER & LINES GP-BUCKET
385-2829 CYLINDER & LINES GP-STICK
CYLINDER & SEAL GP-BOOM
385-2828 CYLINDER & SEAL GP-BOOM
CYLINDER & SEAL GP-BUCKET
385-2834 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-STICK
385-2831 CYLINDER & SEAL GP-STICK
385-2824 CYLINDER AR-BOOM
 

#M00767360250
 

385-2834: CYLINDER & SEAL GP-BUCKET

385-2834 CYLINDER & SEAL GP-BUCKET
S/N LCY1-UP
100-MM (3.9-IN) BORE X 939-MM (36.9-IN) STROKE
PART OF 385-2832 CYLINDER & LINES GP-BUCKET
i04949949 M0076736
3852834 CYLINDER & SEAL GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 313D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 390-4219 [1] CYLINDER AS  
1A. 229-1095 [1] BUSHING  
2. 390-4220 [1] ROD AS  
2A. 248-7857 [1] BUSHING  
3. 390-4221 [1] HEAD  
4. 390-4158 [1] BUSHING  
5. 390-4157 [1] RING-RETAINING  
6. 390-4159 [1] RING-SNAP  
7. 390-4225 [1] PISTON  
8. 390-4226 [1] SETSCREW-SOCKET (M10X1.5X10-MM)  
9. 385-2890 [1] BALL  
10. 3E-6910 M [15] BOLT-SOCKET HEAD (M12X1.75X70-MM)  
11. 166-1492 [2] SEAL-LIP TYPE  
12. 235-7679 [2] SEAL-LIP TYPE  
13. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
14. 416-1295 J [1] SEAL-WIPER  
15. 416-1296 J [1] SEAL-U-CUP  
16. 416-1298 J [1] SEAL-BUFFER  
17. 416-1297 J [1] RING-BACKUP  
18. 416-1299 J [1] SEAL-O-RING  
19. 416-1300 J [1] RING-BACKUP  
20. 416-1302 J [1] SEAL AS-PISTON  
21. 416-1301 J [2] RING-WEAR  
22. 416-1303 J [2] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  390-4227 [1] KIT-SEAL (BUCKET CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#M00767360251
 

385-2831: CYLINDER & SEAL GP-STICK

385-2831 CYLINDER & SEAL GP-STICK
S/N LCY1-UP
120-MM (4.7-IN) BORE X 1197-MM (47.1-IN) STROKE
PART OF 385-2829 CYLINDER & LINES GP-STICK
i04978736 M0076736
3852831 CYLINDER & SEAL GP-STICK Parts scheme
  For full view, you need register

Parts for your 313D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 390-4202 [1] CYLINDER AS-STICK  
1A. 229-1093 [1] BUSHING  
2. 390-4203 [1] ROD AS  
2A. 229-1093 [1] BUSHING  
3. 390-4204 [1] HEAD  
4. 385-2900 [1] BUSHING  
5. 385-2899 [1] RING-RETAINING  
6. 390-4207 [1] STOP  
7. 390-4208 [1] PISTON  
8. 385-2905 [1] RING-SNAP  
9. 385-2922 [1] BALL  
10. 422-9120 [1] SETSCREW-HEX SOCKET  
11. 385-2910 [1] RING-RETAINING  
12. 385-2920 [1] RING-RETAINING  
13. 390-4215 [1] STOP  
14. 095-0703 M [12] BOLT-SOCKET HEAD (M16X2X75-MM)  
15. 166-1492 [4] SEAL-LIP TYPE  
16. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
17. 8T-6763 [1] PLUG-PIPE (1/4-18-THD)  
18. 416-1284 J [1] SEAL-WIPER  
19. 416-1285 J [1] SEAL-U-CUP  
20. 416-1287 J [1] SEAL-BUFFER  
21. 416-1286 J [1] RING-BACKUP  
22. 416-1288 J [1] SEAL-O-RING  
23. 416-1289 J [1] RING-BACKUP  
24. 416-1291 J [1] SEAL AS  
25. 416-1290 J [2] RING-WEAR  
26. 416-1292 J [2] RING-WEAR  
27. 416-1293 J [1] RING-SEAL  
28. 416-1294 J [1] RING-SEAL  
   
    AVAILABLE REPAIR KIT(S):
  393-7949 J KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#M00767360252
 

385-2824: CYLINDER AR-BOOM

385-2824 CYLINDER AR-BOOM
S/N LCY1-UP
i07508725 M0076736
  For full view, you need register

Parts for your 313D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  385-2825 Y [1] CYLINDER & LINES GP-BOOM (LH)  
  385-2826 Y [1] CYLINDER & LINES GP-BOOM (RH)  
  Y   SEPARATE ILLUSTRATION
 

#M00767360253
 

421-9132: DRIVE GP-SWING

421-9132 DRIVE GP-SWING -WITH MOTOR
S/N LCY1-UP
PART OF 424-0519 DRIVE GP-SWING
i06851793 M0076736
4219132 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 313D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 467-4412 CY [1] DRIVE GP-SWING (WITHOUT MOTOR)  
2. 422-9182 Y [1] MOTOR GP-SWING  
3. 6V-7644 [1] RING-RETAINING  
4. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 8T-5041 M [12] BOLT (M12X1.75X120-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#M00767360254
 

424-0519: DRIVE GP-SWING

424-0519 DRIVE GP-SWING -WITH MOTOR
S/N LCY1-UP
PART OF 441-8587 POWER TRAIN AR
i05861981 M0076736
4240519 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 313D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 099-3563 [1] CONNECTOR  
2. 191-2662 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
3. 267-6744 [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  227-6227 [1] BOSS  
  267-6786 [1] FITTING  
4. 421-9132 Y [1] DRIVE GP-SWING (WITH MOTOR)  
5. 424-0524 [1] PIPE-GAUGE  
6. 3K-0360 [2] SEAL-O-RING  
7. 6V-7238 [1] VALVE-SHUTOFF (HYDRAULIC OIL)  
  Y   SEPARATE ILLUSTRATION
 

#M00767360255
 

467-4412: DRIVE GP-SWING

467-4412 DRIVE GP-SWING
S/N LCY1-UP
WITHOUT MOTOR
PART OF 421-9132 DRIVE GP-SWING
i06851764 M0076736
4674412 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 313D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-6089 [2] DOWEL  
2. 191-2602 [6] WASHER (32X56X1.2-MM THK)  
3. 191-2605 [1] WASHER (30X75X3-MM THK)  
4. 191-2608 [3] GEAR-PLANETARY  
5. 191-2609 [3] SHAFT-PLANETARY  
6. 191-2610 [3] PIN-SPRING  
7. 191-2611 [1] GEAR-SUN  
8. 191-2613 [1] GEAR-RING  
9. 199-4627 [6] WASHER  
10. 333-3048 [1] CARRIER  
11. 333-3049 [3] GEAR-PLANETARY  
12. 333-3050 [3] BEARING  
13. 333-3051 [3] SHAFT  
14. 095-0879 [3] PIN-SPRING  
15. 333-3058 [3] WASHER-THRUST (30X47X2-MM THK)  
16. 333-3059 [3] RING-RETAINING  
17. 7X-2619 M [6] BOLT (M6X1X10-MM)  
18. 353-0534 [1] BEARING  
19. 466-5323 [1] BEARING  
20. 353-0536 [1] CARRIER-PLANETARY  
21. 353-0537 [6] BEARING  
22. 353-0538 [1] GEAR-SUN  
23. 353-0539 [1] SHAFT-PINION  
24. 353-0540 [1] HOUSING  
25. 353-0541 [1] SEAL-LIP TYPE  
26. 353-0542 [1] SEAL  
27. 353-0543 [2] PLATE  
28. 095-0929 [1] RING-RETAINING  
  M   METRIC PART
 

#M00767360256
 

442-0253: FASTENER GP-SWING & FINAL DR

442-0253 FASTENER GP-SWING & FINAL DR
S/N LCY1-UP
PART OF 441-8587 POWER TRAIN AR
i05884789 M0076736
4420253 FASTENER GP-SWING & FINAL DR Parts scheme
  For full view, you need register

Parts for your 313D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-1374 [1] SUPPORT  
2. 352-7064 [2] CAP  
3. 481-3909 [14] WASHER-HARD (17.5X30X5-MM THK)  
4. 461-3872 M [46] BOLT (M16X2X50-MM)  
5. 191-2543 [2] PIN  
6. 5D-1026 [1] CLAMP-BAND  
7. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
9. 9X-8268 [32] WASHER (17.5X30X3.5-MM THK)  
10. 5P-0767 E HOSE (62-CM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#M00767360257
 

158-8987: FILTER & VALVE GP-PILOT

158-8987 FILTER & VALVE GP-PILOT -HYDRAULIC OIL
S/N LCY1-UP
PART OF 499-4831 TANK & FILTER GP-HYDRAULIC
i02998214 M0076736
1588987 FILTER & VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 313D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-8670 C [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, PILOT)  
2. 215-4909 C [1] VALVE GP-PILOT RELIEF (HYDRAULIC FILTER)  
2A. 095-1584 [1] SEAL-O-RING  
2B. 095-1590 [1] SEAL-O-RING  
2C. 095-1596 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#M00767360258
 

260-7116: FILTER AR-HYDRAULIC

260-7116 FILTER AR-HYDRAULIC -HAMMER
S/N LCY1-UP
i05845408 M0076736
  For full view, you need register

Parts for your 313D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  283-3599 Y [1] COVER GP-ACCESS (MAIN CONTROL VALVE)  
  278-6715 Y [1] LINES GP-FRONT (HAMMER, RETURN)  
  275-7062 Y [1] WIRING GP-HYDRAULIC CONTROL (RETURN, FILTER)  
  Y   SEPARATE ILLUSTRATION
 

#M00767360259
 

520-9482: FILTER AR-HYDRAULIC

520-9482 FILTER AR-HYDRAULIC
S/N LCY1-UP
i07575216 M0076736
  For full view, you need register

Parts for your 313D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  520-9419 Y [1] COVER GP-ACCESS (HYDRAULIC TANK)  
  278-6715 Y [1] LINES GP-FRONT (HAMMER, RETURN)  
  275-7062 Y [1] WIRING GP-HYDRAULIC CONTROL (RETURN, FILTER)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Specifications
Boom Cylinder Lines
313D2, 313D2 GC and 313D2 LGP Excavator Machine Systems Specifications
Boom Cylinder
313D2, 313D2 GC and 313D2 LGP Excavator Machine Systems Specifications
Stick Cylinder
313D2, 313D2 GC and 313D2 LGP Excavator Machine Systems Specifications
Bucket Cylinder
313D2, 313D2 GC and 313D2 LGP Excavator Machine Systems Specifications
Boom Lines
313D2, 313D2 GC and 313D2 LGP Excavator Machine Systems Specifications
Boom Cylinder Lines
313D2, 313D2 GC and 313D2 LGP Excavator Machine Systems Specifications
Systems Operation
Cylinders (Boom, Stick and Bucket)
312D2 and 313D2 Excavator Machine Systems
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Cylinder Drift - Check - Empty Bucket
312D2 and 313D2 Excavators Machine Systems
Cylinder Drift - Check - Loaded Bucket
312D2 and 313D2 Excavators Machine Systems
Cylinder Speed - Check
312D2 and 313D2 Excavators Machine Systems
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Cylinder - Remove and Install
313D2 Excavator Machine Systems
Stick Cylinder - Remove and Install
313D2 Excavator Machine Systems
Boom Cylinder - Remove and Install
313D2 Excavator Machine Systems
Blade Cylinder - Remove and Install
313D2 Excavator Machine Systems
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}

Caterpillar Parts SIS Catalog 313D2 :

CYLINDER & SEAL GP-BOOM
385-2828 CYLINDER & SEAL GP-BOOM
385-2829 CYLINDER & LINES GP-STICK
385-2832 CYLINDER & LINES GP-BUCKET
385-2826 CYLINDER & LINES GP-BOOM
385-2825 CYLINDER & LINES GP-BOOM
COUPLING GP-PUMP
344-0688 COUPLING GP-PUMP
COUPLING GP-FLEXIBLE
351-3869 COUPLING GP-FLEXIBLE
503-9775 CONTROL AR-AUXILIARY
CYLINDER & SEAL GP-STICK
385-2831 CYLINDER & SEAL GP-STICK
385-2824 CYLINDER AR-BOOM
DRIVE GP-SWING
421-9132 DRIVE GP-SWING
DRIVE GP-SWING
424-0519 DRIVE GP-SWING
DRIVE GP-SWING
467-4412 DRIVE GP-SWING
FASTENER GP-SWING & FINAL DR
442-0253 FASTENER GP-SWING & FINAL DR
FILTER & VALVE GP-PILOT
158-8987 FILTER & VALVE GP-PILOT
260-7116 FILTER AR-HYDRAULIC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.