ELECTRICAL AND STARTING SYSTEM
HARNESS GPELECTRICAL AND STARTING SYSTEM
HARNESS GP#M00771800600
252-7430: HARNESS AS-BOX
For full view, you need register
#M00771800601
359-9932: HARNESS AS-BOX
359-9932 HARNESS AS-BOX
S/N 2A31-UP
EMCP 4.2
PART OF 368-4865 BOX GP-ELECTRONIC
AN ATTACHMENT
S/N 2A31-UP
EMCP 4.2
PART OF 368-4865 BOX GP-ELECTRONIC
AN ATTACHMENT
For full view, you need register
Parts for your C27 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 112-7497 | [4] | END-WIRE (14-GA) | ||
| 109-3038 | [6] | END-WIRE (16-GA) | ||
| 110-8714 | [44] | END-WIRE (18-GA) | ||
| 8T-8729 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [54] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1767 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-8737 | [18] | PLUG-SEAL | ||
| 133-8753 | [1] | RECEPTACLE AS-CONNECTOR (70-PIN) | ||
| 9W-1951 | [2] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 7K-1181 B | [12] | STRAP-CABLE | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(33-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#M00771800602
361-1650: HARNESS AS-BOX
361-1650 HARNESS AS-BOX
S/N 2A31-UP
EMCP 4.3
PART OF 361-7119 WIRING GP-BOX
AN ATTACHMENT
S/N 2A31-UP
EMCP 4.3
PART OF 361-7119 WIRING GP-BOX
AN ATTACHMENT
For full view, you need register
Parts for your C27 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8T-8737 | [7] | PLUG-SEAL | ||
| 109-3038 | [32] | END-WIRE (16-GA) | ||
| 110-8714 | [2] | END-WIRE (18-GA) | ||
| 112-7497 | [14] | END-WIRE (14-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(20-CM) | |||
| 9X-3402 | [33] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [33] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 183-5784 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#M00771800603
361-1651: HARNESS AS-BOX
361-1651 HARNESS AS-BOX
S/N 2A31-UP
EMCP 4.4
PART OF 361-7119 WIRING GP-BOX
AN ATTACHMENT
S/N 2A31-UP
EMCP 4.4
PART OF 361-7119 WIRING GP-BOX
AN ATTACHMENT
For full view, you need register
Parts for your C27 GENERATOR SET:
CATERPILLAR SIS#M00771800604
361-7123: HARNESS AS-BOX
361-7123 HARNESS AS-BOX
S/N 2A31-UP
EMCP 4.4
PART OF 361-7119 WIRING GP-BOX
AN ATTACHMENT
S/N 2A31-UP
EMCP 4.4
PART OF 361-7119 WIRING GP-BOX
AN ATTACHMENT
For full view, you need register
Parts for your C27 GENERATOR SET:
CATERPILLAR SIS#M00771800605
446-5624: HARNESS AS-BOX
For full view, you need register
Parts for your C27 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 109-3038 | [6] | END-WIRE (16-GA) | ||
| 110-8714 | [30] | END-WIRE (18-GA) | ||
| 112-7497 | [14] | END-WIRE (14-GA) | ||
| 113-8961 | [1] | END-WIRE (10-GA) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 8T-8729 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [42] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1767 | [8] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-8737 | [26] | PLUG-SEAL | ||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1768 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(39-CM) | |||
| 2L-8071 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 133-8753 | [1] | RECEPTACLE AS-CONNECTOR (70-PIN) | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| E | ORDER BY THE CENTIMETER | |||
#M00771800606
448-9412: HARNESS AS-BOX
For full view, you need register
Parts for your C27 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8558 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 8T-8737 | [11] | PLUG-SEAL | ||
| 9X-3265 | [1] | SEAL-CONNECTOR (24-PIN) | ||
| 9X-7144 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8558 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3265 | [2] | SEAL-CONNECTOR (24-PIN) | ||
| 109-3038 | [8] | END-WIRE (16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 9X-3402 | [16] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [16] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 351-9187 | [1] | CONNECTOR | ||
| 416-1367 | [1] | CONNECTOR AS | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#M00771800607
448-9413: HARNESS AS-BOX
For full view, you need register
Parts for your C27 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [18] | PLUG-SEAL | ||
| 9X-0347 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-5615 | [2] | SEAL (INTERFACE, 70-PIN) | ||
| 9X-4391 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-5615 | [2] | SEAL (INTERFACE, 70-PIN) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(39-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(135-CM) | |||
| 9X-3402 | [133] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [133] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [6] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS & WEDGE) | ||||
| 366-9370 | [1] | PLUG AS (3-WAY) | ||
| 416-1334 | [1] | SEAL-WIRE | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#M00771800608
244-9644: HARNESS AS-CONTROL
244-9644 HARNESS AS-CONTROL -LOAD SHARE
S/N 2A31-UP
LOW VOLTAGE
PART OF 252-7369 CONTROL GP-LOAD SHARE MODULE
AN ATTACHMENT
S/N 2A31-UP
LOW VOLTAGE
PART OF 252-7369 CONTROL GP-LOAD SHARE MODULE
AN ATTACHMENT
For full view, you need register
Parts for your C27 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-8737 | [62] | PLUG-SEAL | ||
| 133-8753 | [1] | RECEPTACLE AS-CONNECTOR (70-PIN) | ||
| 7K-1181 | [2] | STRAP-CABLE | ||
| 125-9997 | [7] | TERMINAL-FORK (16-GA TO 22-GA, NO. 6 SCREW) | ||
| 2L-8075 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) |
#M00771800609
263-1737: HARNESS AS-CONTROL
263-1737 HARNESS AS-CONTROL -MAIN
S/N 2A31-UP
PART OF 263-1745 WIRING GP-BOX
AN ATTACHMENT
S/N 2A31-UP
PART OF 263-1745 WIRING GP-BOX
AN ATTACHMENT
For full view, you need register
Parts for your C27 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 5P-6006 D | TUBE-HEAT SHRINK (9.52-MM DIA)(1.7-M) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(182-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(410-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(85-CM) | |||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 7K-1181 | [7] | STRAP-CABLE | ||
| 8T-8729 | [17] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [208] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [20] | PLUG-SEAL | ||
| 9X-1343 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 126-1767 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1768 | [15] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 160-7689 | [3] | PLUG AS-CONNECTOR (70-PIN) | ||
| (EACH INCLUDES) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 234-1857 | [1] | PLUG-CONNECTOR (9-PIN) | ||
| 234-1858 | [1] | PLUG-CONNECTOR (12-PIN) | ||
| 244-0452 | [21] | END-WIRE (14-GA TO 20-GA) | ||
| 246-7014 | [1] | SEAL (9-POSITION) | ||
| 246-7015 | [1] | SEAL (12-POSITION) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
Information:
ELECTRICAL AND STARTING SYSTEM
HARNESS GP
Engine News
Improved Installation Process for Securing the Sensing Wires is Now Available for Certain C27 and C32 Generator Set Engines {1404, 1408, 4459}
Improved Installation Process for Securing the Sensing Wires is Now Available for Certain C27 and C32 Generator Set Engines {1404, 1408, 4459}
Improved Installation Process for Securing the Sensing Wires is Now Available for Certain C27 and C32 Generator Set Engines {1404, 1408, 4459}
Special Instruction
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
