394-7470 MUFFLER & MOUNTING GP S/N ESG1-UP; WDJ1-UP PART OF 519-9618 ENGINE AR-COMPLETE 320D2 L EXCAVATOR

Pos.	Part No	Qty	Parts name
1.	241-9264	[1]	CLAMP-MUFFLER
2.	455-3798 M	[2]	BOLT (M10X1.5X25-MM)
3.	374-5981	[1]	PIPE AS-EXHAUST
4.	374-6038	[2]	U-BOLT
5.	467-4842	[1]	MUFFLER AS
6.	379-4430	[1]	PIPE-TAIL
7.	8T-4133 M	[8]	NUT (M10X1.5-THD)
8.	419-7580	[1]	SUPPORT AS
9.	451-2181 M	[4]	BOLT (M12X1.75X30-MM)
10.	388-7014	[1]	CLAMP-BENT BOLT
11.	453-3454	[2]	WASHER-HARD (11X21X2.5-MM THK)
12.	453-8033	[4]	WASHER-HARD (13.5X30X4-MM THK)
	M		METRIC PART

#M00782270071

455-0464: PRECLEANER GP

PRECLEANER GP

455-0464 PRECLEANER GP
S/N ESG1-UP; WDJ1-UP

i06019017 M0078227

For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	343-5645	[1]	PRECLEANER AS
	222-2277	[1]	CLAMP

#M00782270072

396-6322: TURBOCHARGER GP

TURBOCHARGER GP

396-6322 TURBOCHARGER GP
S/N BD61-UP
PART OF 417-3389 ENGINE AR-PRIMARY
Type 1

i05282003 M0078227

For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6I-0217 M	[5]	BOLT (M8X1.25X20-MM)
2.	238-8292	[12]	BOLT-FLANGE HEAD
3.	437-4170	[1]	GASKET
4.	278-0017	[1]	GASKET
5.	416-7727	[2]	GASKET
6.	286-7851	[12]	SPACER
7.	384-2286	[1]	MANIFOLD
8.	365-4584	[1]	TUBE AS
9.	456-5182	[1]	LINE AS
9A.	3P-0647	[1]	SEAL-O-RING
9B.	277-9940	[1]	SEAL-O-RING
10.	431-4572	[1]	TURBOCHARGER
11.	277-9463	[1]	CLAMP
12.	361-7519	[4]	ROD-THREADED
13.	6I-0563 M	[4]	NUT (M10X1.5-THD)
14.	451-0548	[1]	BOLT (BANJO)
	M		METRIC PART

#M00782270073

396-6322: TURBOCHARGER GP

TURBOCHARGER GP

396-6322 TURBOCHARGER GP
S/N BD61-UP
PART OF 417-3389 ENGINE AR-PRIMARY
Type 2

i07383310 M0078227

For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6I-0217 M	[5]	BOLT (M8X1.25X20-MM)
2.	238-8292	[12]	BOLT-FLANGE HEAD
3.	437-4170	[1]	GASKET
4.	278-0017	[1]	GASKET
5.	416-7727	[2]	GASKET
6.	286-7851	[12]	SPACER
7.	384-2286	[1]	MANIFOLD
8.	519-2458 C	[1]	TUBE AS
9.	456-5182	[1]	LINE AS
9A.	3P-0647	[1]	SEAL-O-RING
9B.	277-9940	[1]	SEAL-O-RING
10.	431-4572	[1]	TURBOCHARGER
11.	277-9463	[1]	CLAMP
12.	361-7519	[4]	ROD-THREADED
13.	6I-0563 M	[4]	NUT (M10X1.5-THD)
14.	451-0548	[1]	BOLT (BANJO)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#M00782270074

467-7466: CONTROL GP-GOVERNOR

CONTROL GP-GOVERNOR

467-7466 CONTROL GP-GOVERNOR
S/N ESG1-UP; WDJ1-UP
PART OF 518-8160, 518-8164 CHASSIS AR

i06753851 M0078227

4677466 CONTROL GP-GOVERNOR Parts scheme

For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[1]	STRAP-CABLE
2.	396-3531	[1]	BRACKET AS
3.	396-3533	[1]	BRACKET AS
4.	396-3538	[1]	BRACKET AS
5.	521-8862	[1]	BRACKET AS
6.	503-0794	[1]	BRACKET AS
7.	509-9705	[1]	MOTOR AS-GOVERNOR
	8T-8737	[1]	PLUG-SEAL
	9X-3401	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[7]	PIN-CONNECTOR (14-GA TO 16-GA)
	157-3184	[1]	JOINT
	243-4509	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
8.	5C-2890 M	[1]	NUT (M6X1-THD)
9.	6V-3265	[4]	CLIP
10.	7X-2537 M	[2]	BOLT (M8X1.25X35-MM)
11.	7X-2619 M	[2]	BOLT (M6X1X10-MM)
12.	8T-4121	[7]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
14.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
15.	8T-4200 M	[5]	BOLT (M8X1.25X16-MM)
16.	8T-4224	[7]	WASHER-HARD (8.8X16X2-MM THK)
17.	9X-8256	[3]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART

#M00782270075

446-1895: FILTER GP-FUEL

FILTER GP-FUEL

446-1895 FILTER GP-FUEL
S/N ESG1-UP; WDJ1-UP
24-VOLT
PART OF 519-8523 LINES GP-FUEL

i05777311 M0078227

For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	395-3439	[1]	BOWL AS (FUEL FILTER)
2.	1R-1804	[1]	FILTER ELEMENT-WTR SEP & FUEL
3.	387-6403	[1]	STRAINER (FUEL FILTER)
4.	395-3437	[1]	VALVE AS-DRAIN (FUEL FILTER)

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY

#M00782270076

498-6686: KIT-FUEL PUMP

KIT-FUEL PUMP

498-6686 KIT-FUEL PUMP
S/N ESG1-UP; WDJ1-UP
TRANSFER FUEL PUMP ATTACHMENT KIT

i06530857 M0078227

For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
3S-2093	[16]	STRAP-CABLE
7K-1181	[11]	STRAP-CABLE
8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
7X-2619 M	[2]	BOLT (M6X1X10-MM)
8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
9X-3495	[1]	CLIP AS
8C-3334	[2]	RIVET-TUBULAR
9X-8256	[2]	WASHER (6.6X12X2-MM THK)
096-2591 M	[2]	SCREW-MACHINE (M5X0.8X35-MM)
149-5050	[2]	RELAY (24-VOLT)(REFUELING PUMP)
149-5051 AB	[1]	CONNECTOR-RECEPTACLE
213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)
238-1579 Y	[1]	HARNESS AS-PUMP (REFUELING)
238-1594 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)
238-1596 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)
276-6993	[1]	PANEL AS
180-3748 M	[4]	INSERT-THREADED (M8X1.25-THD)
319-1335 Y	[1]	HARNESS AS-WIRING (FUEL SYSTEM)

		(ABOVE PARTS ARE PART OF WIRING GROUP 238-1570)

309-3872	[1]	FILM-WARNING (EXPLOSION HAZARD, READ OMM)

		(ABOVE PART IS PART OF FILM GROUP 298-4258)

5P-1076	[6]	WASHER-HARD (13.5X30X4-MM THK)
7K-1181	[1]	STRAP-CABLE
8T-4179 M	[2]	BOLT (M12X1.75X20-MM)
8T-4192 M	[4]	BOLT (M12X1.75X25-MM)
8T-4194 M	[2]	BOLT (M12X1.75X50-MM)
8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-4244 M	[2]	NUT (M12X1.75-THD)
9M-7958	[4]	CLAMP-HOSE
324-5761	[1]	COVER AS
121-1029	[1]	CLIP
368-5216 Y	[1]	PUMP GP-FUEL TRANSFER
368-5219	[1]	CONNECTOR-HOSE
418-6596	[1]	SWITCH AS-LIQUID LEVEL (FUEL LEVEL)
2S-4078	[1]	SEAL-O-RING
8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
438-2674	[1]	SUPPORT AS
7T-1099	[6]	LINK
8T-3597 M	[4]	NUT-WELD (M12X1.75-THD)
8T-3612 M	[1]	NUT-WELD (M8X1.25-THD)
121-1029	[2]	CLIP
501-4186 Y	[1]	VALVE GP-REFUELING (FOOT)
444-7841	[1]	FILM-INSTRUCTION (REFUELING PUMP)
457-1157 E		HOSE (468-CM)

		(ABOVE PARTS ARE PART OF PUMP GROUP FUEL 419-8980)

A		NOT PART OF THIS GROUP
B		USE AS REQUIRED
E		ORDER BY THE CENTIMETER
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#M00782270077

519-8523: LINES GP-FUEL

LINES GP-FUEL

519-8523 LINES GP-FUEL
S/N ESG1-UP; WDJ1-UP
PART OF 518-8160, 518-8164 CHASSIS AR

i06859633 M0078227

For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[1]	STRAP-CABLE
2.	4I-0379	[1]	VALVE-MANUAL (FUEL)
3.	9X-9896	[6]	MOUNT (ISOLATION)
4.	093-2065	[3]	GROMMET
5.	157-1669	[2]	CONNECTOR
6.	176-4746	[1]	GROMMET
7.	281-5987	[1]	ELBOW
8.	305-6873	[1]	SENSOR GP-PRESSURE (FUEL)
9.	320-3063	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC AIR)
10.	332-8591	[1]	ELBOW AS
	9X-3982	[1]	ELBOW
	238-5080	[1]	SEAL-O-RING
11.	332-8598	[1]	ADAPTER AS
	034-3679	[1]	ADAPTER
	238-5080	[1]	SEAL-O-RING
12.	343-3917	[2]	CONNECTION
13.	368-6658	[1]	VALVE
14.	381-9061	[1]	BASE AS-FUEL FILTER
15.	381-9064	[1]	INDICATOR-FUEL FILTER CHANGE
16.	387-2637	[1]	ADAPTER-TEE
17.	390-2263	[1]	ADAPTER-TEE
18.	347-8645 E		HOSE (130-CM)
18A.	347-8645 E		HOSE (61-CM)
19.	420-2083	[1]	PLATE AS
	6V-9632 M	[3]	NUT-WELD (M6X1-THD)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
20.	420-5299	[4]	CLIP (LOOP)
21.	421-6175	[2]	ADAPTER AS
			(EACH INCLUDES)
	214-7568	[1]	SEAL-O-RING
	426-4018	[1]	ADAPTER
22.	423-6434 Y	[1]	SENSOR GP-LIQUID LEVEL (WATER IN FUEL)(FUEL)
23.	433-4841	[1]	ADAPTER
24.	438-5386	[1]	FILTER AS-WATER SEP & FUEL (ULTRA HIGH EFFICIENCY)
25.	446-1895 Y	[1]	FILTER GP-FUEL (24-VOLT, LONG BOWL)
26.	347-8647 E		HOSE (154-CM)
27.	347-8646 E		HOSE (211-CM)
28.	491-9755	[1]	HOSE AS
29.	491-9756	[1]	HOSE AS
30.	491-9757	[1]	HOSE AS
31.	491-9758 I	[1]	HOSE AS
32.	491-9762	[1]	HOSE AS
33.	501-7449	[1]	ADAPTER AS
	214-7568	[1]	SEAL-O-RING
	504-2756	[1]	ADAPTER
34.	519-8524 I	[1]	HOSE AS
35.	148-8411	[3]	PLUG AS
			(EACH INCLUDES)
	3K-0360	[1]	SEAL-O-RING
	9S-4185	[1]	PLUG (3/4-16-THD)
36.	177-2215	[1]	STRAP-DUAL CLAMP
37.	214-7568	[2]	SEAL-O-RING
38.	228-7100	[3]	SEAL-O-RING
39.	228-7102	[1]	SEAL-O-RING
40.	281-5981	[1]	ELBOW AS
	6V-8722	[1]	ELBOW
	228-7091	[1]	SEAL-O-RING
	238-5080	[1]	SEAL-O-RING
41.	344-5360	[7]	CLIP (LOOP)
42.	347-4416	[2]	ADAPTER
43.	351-4089	[4]	GROMMET
44.	351-4318	[4]	CLIP (LOOP)
45.	351-4320	[5]	CLIP (LOOP)
46.	351-4321	[4]	CLIP (LOOP)
47.	3J-7354	[1]	SEAL-O-RING
48.	5V-9155	[3]	CLAMP-HOSE
49.	6S-8620	[8]	CLAMP-HOSE
50.	8C-5608	[3]	SPACER (6.5X9.5X25.4-MM THK)
51.	8T-1889	[4]	CLIP (SLOT)
52.	8T-1890	[4]	CLIP (TAB)
53.	8T-4121	[25]	WASHER-HARD (11X21X2.5-MM THK)
54.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
55.	8T-4137 M	[16]	BOLT (M10X1.5X20-MM)
56.	8T-4138 M	[3]	BOLT (M6X1X20-MM)
57.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
58.	8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
59.	9X-2480 M	[3]	BOLT (M6X1X45-MM)
60.	9X-6165	[6]	WASHER (6.5X22X2.5-MM THK)
61.	9X-8256	[3]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#M00782270078

396-6969: LINES GP-FUEL FILTER

LINES GP-FUEL FILTER

396-6969 LINES GP-FUEL FILTER
S/N BD61-UP
PART OF 417-3389 ENGINE AR-PRIMARY

i05281752 M0078227

3966969 LINES GP-FUEL FILTER Parts scheme

For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	100-4458 M	[4]	BOLT (M8X1.25X14-MM)
2.	111-8222 M	[1]	BOLT (M8X16-MM)
3.	231-4457	[1]	GASKET
4.	246-4383	[1]	PLATE
5.	398-3877	[1]	LINE AS-FUEL
6.	232-3126	[1]	CLIP
7.	240-5571	[1]	BRACKET
	M		METRIC PART

#M00782270079

364-2901: LINES GP-FUEL INJECTION

LINES GP-FUEL INJECTION

364-2901 LINES GP-FUEL INJECTION
S/N BD61-UP
PART OF 396-4502 PUMP GP-FUEL INJECTION

i05792294 M0078227

3642901 LINES GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 320D2 L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	124-3708	[3]	CLIP
2.	124-3709	[1]	CLIP
3.	162-9994	[2]	CLIP
4.	364-2862	[1]	LINE AS-FUEL
5.	364-2863	[1]	LINE AS-FUEL
6.	364-2864	[1]	LINE AS-FUEL
7.	364-2866	[1]	LINE AS-FUEL
8.	364-2879	[1]	LINE AS-FUEL
9.	364-2882	[1]	LINE AS-FUEL