GENERATORS
GENERATOR GPGENERATORS
GENERATOR GP#M00793580550
252-3850: GENERATOR AR
For full view, you need register
Parts for your 3516 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3849 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [3] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [1] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00793580551
252-3854: GENERATOR AR
For full view, you need register
Parts for your 3516 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3853 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [3] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [1] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00793580552
252-3858: GENERATOR AR
For full view, you need register
Parts for your 3516 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3857 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [3] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [1] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00793580553
252-3860: GENERATOR AR
For full view, you need register
Parts for your 3516 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3859 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [3] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [1] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00793580554
252-3862: GENERATOR AR
For full view, you need register
Parts for your 3516 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3861 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [3] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [1] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00793580555
252-3864: GENERATOR AR
For full view, you need register
Parts for your 3516 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3863 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [3] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [1] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00793580556
252-3866: GENERATOR AR
For full view, you need register
Parts for your 3516 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3865 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [3] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [1] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00793580557
252-3876: GENERATOR AR
For full view, you need register
Parts for your 3516 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3875 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [3] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [1] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00793580558
252-3878: GENERATOR AR
For full view, you need register
Parts for your 3516 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3877 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [3] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [1] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00793580559
252-3880: GENERATOR AR
For full view, you need register
Parts for your 3516 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3879 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [3] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [1] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
Information:
Caterpillar Parts SIS Catalog 3516 :
Truck sale:
719,892
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
298,989
500,000
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
- mobile generator sets
FOLEY EQUIPMENT COMPANY
500,000
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
- mobile generator sets
FOLEY EQUIPMENT COMPANY
800,000
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC