ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GPAIR INLET AND EXHAUST SYSTEM
LINES GP-AIRELECTRICAL AND STARTING SYSTEM
BATTERY GPELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP#M00797780530
382-9606: STARTING MOTOR GP-AIR
382-9606 STARTING MOTOR GP-AIR
PART OF 385-2593 STARTING MOTOR GP-AIR
AN ATTACHMENT
PART OF 385-2593 STARTING MOTOR GP-AIR
AN ATTACHMENT
Parts for your 3512C MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 297-5479 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | |
2. | 6K-1972 | [4] | ELBOW-FLARED | |
3. | 539-6084 | [2] | HOSE AS (AIR) | |
4. | 3M-7045 | [1] | PLUG (3/4-14 NPT-THD) | |
AVAILABLE REPAIR KIT(S): | ||||
278-0513 | [1] | KIT-STARTER REPAIR | ||
(INCLUDES STARTER DRIVE) | ||||
385-1748 | [1] | KIT-ENGINE OVERHAUL | ||
(INCLUDES 0-RINGS, BEARINGS, SCREWS, RING, SPACERS, SHIMS, ELEMENTS, SHAFTS, LOCTITE & WASHERS) | ||||
465-8142 | [1] | KIT-SERVICE (CONTROLLER, O-RINGS, FASTENERS) | ||
(INCLUDES LOCTITE) | ||||
533-5902 | [1] | KIT-SERVICE | ||
(INCLUDES RETAINER, RETAINER PLATE, SCREW, & SILENCER ELEMENT) |
#M00797780531
385-2593: STARTING MOTOR GP-AIR
Parts for your 3512C MARINE ENGINE:
CATERPILLAR SIS#M00797780532
207-1562: STARTING MOTOR GP-ELECTRIC
207-1562 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 335-4153, 380-7260 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
24-VOLT
PART OF 335-4153, 380-7260 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
Parts for your 3512C MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3T-3434 | [6] | PLUG | |
2. | 7T-3279 | [1] | HOUSING AS | |
3. | 8T-8566 | [1] | TERMINAL AS | |
4. | 6V-8188 | [4] | NUT (1/2-13-THD) | |
5. | 7X-0562 | [4] | WASHER-HARD (13.5X19X0.8-MM THK) | |
6. | 3T-3422 | [1] | WIRE AS | |
7. | 7T-3278 | [1] | HOLDER AS-BRUSH (STARTING MOTOR) | |
8. | 7T-3277 | [1] | COIL AS-FIELD | |
9. | 7T-3454 | [1] | INSULATOR | |
10. | 283-1107 | [1] | KIT-CONNECTOR (STARTING MOTOR) | |
(INCLUDES CONNECTORS, BOLT & TERMINAL-STARTER) | ||||
11. | 7T-3451 | [1] | KIT-INSULATOR (STARTING MOTOR) | |
12. | 8T-8569 | [1] | INSULATOR-TERMINAL | |
13. | 5S-7349 | [4] | BOLT (1/4-20X0.5-IN) | |
14. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
15. | 8H-1141 | [4] | SHOE-POLE | |
16. | 3R-8797 | [8] | SCREW & WASHER AS (3/8-24X0.72-IN) | |
17. | 7T-3276 | [1] | ARMATURE AS (24-VOLT) | |
18. | 3E-7775 | [1] | HOUSING AS | |
19. | 4M-1831 | [1] | PLUG-LEVER HOUSING | |
20. | 7L-2894 | [1] | GASKET | |
21. | 0S-1597 | [5] | BOLT (1/4-28X1-IN) | |
22. | 6N-3826 | [1] | DRIVE AS-MOTOR | |
23. | 7T-3974 | [1] | HOUSING AS-DRIVE | |
24. | 7X-3373 | [6] | BOLT (5/16-18X0.88-IN) | |
25. | 548-9596 | [1] | KIT-SOLENOID (24-VOLT) | |
(INCLUDES BOLTS, NUTS & CONNECTORS) | ||||
26. | 6V-8378 | [3] | NUT (10-32-THD) | |
27. | 8F-1434 | [2] | LOCKWASHER | |
28. | 8T-0328 | [3] | WASHER-HARD (5.5X10X1-MM THK) | |
29. | 9X-4824 | [1] | COVER-STARTING MOTOR | |
30. | 7T-3268 | [1] | KIT-LEVER (STARTING MOTOR) | |
(INCLUDES LEVER ASSEMBLIES, SEALS, NUT, GASKET & RETAINER) | ||||
31. | 8C-3655 | [1] | KIT-BRUSH (STARTING MOTOR) | |
(INCLUDES BRUSHES, SPRINGS, SCREWS, SCREW ASSEMBLIES, & SEAL) | ||||
32. | 8T-9884 | [1] | KIT-INSULATOR (STARTING MOTOR) | |
(INCLUDES INSULATORS & BUSHING) | ||||
AVAILABLE REPAIR KIT(S): | ||||
7T-3267 | [1] | KIT-BUSHING (STARTING MOTOR) | ||
(INCLUDES BUSHINGS, WICKS, CUPS, SEALS, GASKET, SCREW ASSEMBLIES, WASHERS, SPACER & NUT) |
#M00797780533
335-4149: STARTING MOTOR GP-ELECTRIC
Parts for your 3512C MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 352-9766 Y | [2] | STARTING MOTOR GP-ELECTRIC (24-VOLT) | |
2. | 9Y-6089 | [2] | GASKET | |
3. | 7J-8902 | [6] | BOLT-12 POINT HEAD (5/8-11X1.5-IN) | |
4. | 7L-5887 | [1] | CABLE AS (0000-GA) | |
3L-7634 | [2] | TERMINAL-RING (0000-GA, 1/2-IN SCREW) | ||
5. | 294-2318 | [2] | COVER-TERMINAL (RED) | |
6. | 4L-6155 | [1] | CABLE AS (0000-GA) | |
3L-7634 | [2] | TERMINAL-RING (0000-GA, 1/2-IN SCREW) | ||
7. | 3L-6836 | [1] | SPACER (0.5X0.75X0.56-IN THK) | |
8. | 294-2319 | [2] | COVER-TERMINAL (BLACK) | |
Y | SEPARATE ILLUSTRATION |
#M00797780534
335-4153: STARTING MOTOR GP-ELECTRIC
Parts for your 3512C MARINE ENGINE:
CATERPILLAR SIS#M00797780535
352-9766: STARTING MOTOR GP-ELECTRIC
352-9766 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 335-4149 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
24-VOLT
PART OF 335-4149 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
Parts for your 3512C MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7M-0326 | [1] | CONNECTOR | |
2. | 9H-3757 | [2] | WASHER (0.516X1X0.094-IN THK) | |
3. | 1S-7446 | [3] | SCREW-MACHINE (8-32X0.437-IN) | |
4. | 8C-9660 | [3] | WASHER (4.6X7.9X0.8-MM THK) | |
5. | 9S-2544 | [9] | SCREW-HEX HEAD (8-32X11.13-MM) | |
6. | 7M-0327 | [1] | WASHER-THRUST (17.4X25.4X1.6-MM THK) | |
7. | 3T-3418 | [1] | FRAME AS-END | |
3T-3423 | [1] | CUP | ||
3T-3424 | [1] | PLUG-FELT | ||
9G-4101 | [1] | BUSHING-END | ||
8. | 3T-9525 Y | [1] | PLATE AS-BRUSH (STARTING MOTOR) | |
9. | 1T-0808 | [2] | WASHER (0.516X0.812X0.09-IN THK) | |
10. | 3T-3422 | [1] | WIRE AS | |
11. | 2J-8163 | [2] | SEAL-O-RING | |
12. | 7X-3373 | [1] | BOLT (5/16-18X0.88-IN) | |
13. | 3T-3434 | [6] | PLUG (FELT) | |
14. | 5J-5314 | [5] | BOLT (5/16-18X1.5-IN) | |
15. | 3L-3380 | [1] | BUSHING-TERMINAL | |
16. | 8C-3089 | [1] | SEAL-O-RING | |
17. | 4M-1853 | [1] | LEVER AS-SHIFT | |
18. | 5M-3034 | [1] | LOCKNUT (5/16-24-THD) | |
19. | 7L-2894 | [4] | GASKET | |
20. | 4M-1831 | [4] | PLUG-LEVER HOUSING | |
21. | 4M-1854 | [1] | SHAFT-LEVER | |
22. | 1H-1023 | [1] | SEAL-O-RING | |
23. | 2D-6392 | [1] | SEAL-O-RING | |
24. | 528-6787 | [1] | HOUSING AS-DRIVE | |
25. | 6N-3826 | [1] | DRIVE AS-MOTOR | |
26. | 2H-3429 | [1] | RING-RETAINING | |
27. | 6V-1322 | [4] | BOLT (1/4-20X0.375-IN) | |
28. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
29. | 6N-3279 | [1] | INSULATOR | |
30. | 0S-1597 | [13] | BOLT (1/4-28X1-IN) | |
31. | 1M-9971 | [1] | SPACER (0.835X1.72X0.188-IN THK) | |
32. | 1H-2629 | [3] | STRIP-INSULATION | |
33. | 7M-0324 | [1] | COIL AS-FIELD | |
34. | 3R-8797 | [12] | SCREW & WASHER AS (3/8-24X0.72-IN) | |
35. | 7F-3488 | [6] | SHOE-POLE | |
36. | 7M-8651 | [1] | ARMATURE AS | |
37. | 7M-0325 | [1] | INSULATOR | |
38. | 3T-9524 | [6] | BRUSH AS | |
39. | 3N-3763 | [1] | KIT-TERMINAL (STARTING MOTOR) | |
(INCLUDES BUSHINGS & WASHERS) | ||||
40. | 338-3453 | [1] | SOLENOID AS-STARTING MOTOR (24-VOLT) | |
3R-8801 | [1] | CLAMP | ||
41. | 3R-8801 | [1] | CLAMP | |
42. | 8F-1434 | [2] | LOCKWASHER | |
43. | 6V-8188 | [6] | NUT (1/2-13-THD) | |
44. | 7X-0562 | [6] | WASHER-HARD (13.5X19X0.8-MM THK) | |
45. | 4B-2049 | [6] | NUT (10-32-THD) | |
46. | 8T-0328 | [10] | WASHER-HARD (5.5X10X1-MM THK) | |
47. | 3T-9494 | [6] | SPRING | |
48. | 3E-7771 | [1] | HOUSING AS (STARTING MOTOR) | |
49. | 9G-4101 | [1] | BUSHING-END | |
50. | 3T-3424 | [3] | PLUG-FELT | |
51. | 3T-3423 | [3] | CUP | |
52. | 1M-9968 | [1] | BUSHING | |
53. | 2F-6678 | [1] | SEAL-LIP TYPE | |
54. | 4L-2729 | [1] | WASHER (0.844X1.9X0.188-IN THK) | |
55. | 4M-1896 | [1] | BUSHING-TERMINAL | |
56. | 045-4065 | [4] | SCREW-MACHINE (10-32X0.75-IN) | |
57. | 351-8955 | [1] | SEAL-O-RING | |
58. | 125-6535 | [1] | COVER-STARTING MOTOR | |
Y | SEPARATE ILLUSTRATION |
#M00797780536
380-7260: STARTING MOTOR GP-ELECTRIC
Parts for your 3512C MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 294-2318 | [2] | COVER-TERMINAL (RED) | |
2. | 4H-7869 | [2] | GASKET | |
3. | 7L-5887 | [2] | CABLE AS (0000-GA) | |
(EACH INCLUDES) | ||||
3L-7634 | [2] | TERMINAL-RING (0000-GA, 1/2-IN SCREW) | ||
4. | 207-1562 Y | [2] | STARTING MOTOR GP-ELECTRIC | |
5. | 7J-8902 | [6] | BOLT-12 POINT HEAD (5/8-11X1.5-IN) | |
6. | 294-2319 | [2] | COVER-TERMINAL (BLACK) | |
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#M00797780537
146-5215: STRAINER GP-AIR LINES
146-5215 STRAINER GP-AIR LINES
AN ATTACHMENT
AN ATTACHMENT
Parts for your 3512C MARINE ENGINE:
CATERPILLAR SIS#M00797780538
367-5170: SUPPORT GP-BATTERY
Parts for your 3512C MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3E-4096 | [3] | CAP | |
2. | 8T-2910 M | [3] | NUT-WING (M6X1-THD) | |
3. | 142-2457 | [1] | ANGLE | |
4. | 350-2548 | [1] | SUPPORT-BATTERY | |
5. | 350-2549 | [2] | RACK-BATTERY | |
6. | 350-2552 | [3] | ROD-THREADED | |
7. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
8. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
9. | 8T-4133 M | [5] | NUT (M10X1.5-THD) | |
10. | 8T-4136 M | [5] | BOLT (M10X1.5X25-MM) | |
M | METRIC PART |
#M00797780539
381-0686: SUPPORT GP-BATTERY
381-0686 SUPPORT GP-BATTERY
AN ATTACHMENT
AN ATTACHMENT
Parts for your 3512C MARINE ENGINE:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
Operation and Maintenance Manual
Air Starting Motor Lubricator Bowl - Clean
3512C and 3516C Marine Auxiliary and Generator Set Engines
3512C and 3516C Marine Auxiliary and Generator Set Engines
Air Starting Motor Lubricator Oil Level - Check
3512C and 3516C Marine Auxiliary and Generator Set Engines
3512C and 3516C Marine Auxiliary and Generator Set Engines
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>®</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Systems Operation
Disassembly and Assembly