HYDRAULIC SYSTEM
VALVE GP-PILOTPUMP GP
VALVE GP-RELIEF
IMPLEMENTS
BULLDOZER GPC-FRAME GP
LINES GP-GREASE
OPERATOR STATION
CAB GPPEDAL GP
CONTROL GP-IMPLEMENT
HYDRAULIC SYSTEM
VALVE GP-PILOT
#M00797900200
113-7142: VALVE GP-PILOT CARTRIDGE
113-7142 VALVE GP-PILOT CARTRIDGE
S/N J691-UP
PART OF 121-9479 VALVE GP-PILOT
S/N J691-UP
PART OF 121-9479 VALVE GP-PILOT
For full view, you need register
Parts for your 527 TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6E-4520 | [1] | PLUNGER | |
| 2. | 5P-8356 | [1] | SEAL-O-RING | |
| 3. | 6E-0763 | [1] | RETAINER | |
| 4. | 6E-0766 | [2] | RING-RETAINING | |
| 5. | 113-7559 B | [1] | SHIM | |
| 6. | 6E-4522 | [1] | SEAT-SPRING | |
| 7. | 113-7557 | [1] | SPRING | |
| 8. | 113-7558 | [1] | SEAT-SPRING | |
| 9. | 6E-3414 | [1] | SEAL-U-CUP WIPER | |
| 10. | 6E-4521 | [1] | CAP | |
| AVAILABLE REPAIR KIT(S): | ||||
| 1G-5928 | [1] | KIT-PLUNGER SEAL | ||
| (INCLUDES O-RING SEAL & SPOOL SEAL) | ||||
| B | USE AS REQUIRED | |||
#M00797900201
285-5240: VALVE GP-PUMP CONTROL
285-5240 VALVE GP-PUMP CONTROL -PRESSURE, FLOW COMPENSATOR
S/N J681-UP; J691-UP
PART OF 467-5122 PUMP GP-PISTON
S/N J681-UP; J691-UP
PART OF 467-5122 PUMP GP-PISTON
For full view, you need register
Parts for your 527 TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-8442 M | [4] | BOLT-SOCKET HEAD (M6X1X30-MM) | |
| 2. | 280-7870 | [1] | GASKET | |
| 3. | 6E-6528 J | [2] | SEAL | |
| 4. | 9S-8002 | [1] | PLUG (7/16-20-THD) | |
| 5. | 3J-7354 | [1] | SEAL-O-RING | |
| 6. | 033-6043 J | [1] | SEAL-O-RING | |
| 7. | 6V-6339 J | [1] | SEAL-O-RING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 293-8350 J | [1] | KIT-SEAL (FLOW COMPENSATOR) | ||
| (INCLUDES SEAL-O-RINGS & BACK-UP RINGS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
#M00797900202
283-3456: VALVE GP-RELIEF
For full view, you need register
Parts for your 527 TRACK SKIDDER:
CATERPILLAR SIS#M00797900203
486-9237: BULLDOZER AR-PWR ANGLE & TILT
486-9237 BULLDOZER AR-PWR ANGLE & TILT
S/N J681-UP; J691-UP
S/N J681-UP; J691-UP
For full view, you need register
Parts for your 527 TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | Y | [1] | BLADE GP-ANGLING | |
| 2. | 6E-0367 Y | [2] | CYLINDER GP-LIFT | |
| 3. | 6V-9528 | [1] | FILM-INSTRUCTION (BLADE LIFT, TILT, ANGLE) | |
| 4. | 6Y-8115 Y | [1] | PIN GP-CYLINDER | |
| 5. | 9N-4821 Y | [2] | STEP GP | |
| 6. | 485-2304 Y | [1] | LINES GP-ANGLE & TILT | |
| 7. | 293-8900 Y | [1] | C-FRAME GP-POWER ANGLING | |
| 8. | 293-8920 | [1] | LINK AS | |
| 8A. | 8T-0333 | [2] | BEARING | |
| 3B-8488 | [2] | FITTING-GREASE (1/8-27 PTF) | ||
| 8T-9599 | [2] | RING-RETAINING | ||
| 9. | 296-1451 Y | [1] | CYLINDER GP-TILT (BULLDOZER) | |
| 10. | 484-9588 Y | [2] | CYLINDER GP-ANGLING | |
| Y | SEPARATE ILLUSTRATION | |||
#M00797900204
293-8900: C-FRAME GP-POWER ANGLING
293-8900 C-FRAME GP-POWER ANGLING
S/N J681-UP; J691-UP
PART OF 486-9237 BULLDOZER AR-PWR ANGLE & TILT
S/N J681-UP; J691-UP
PART OF 486-9237 BULLDOZER AR-PWR ANGLE & TILT
For full view, you need register
Parts for your 527 TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-8889 | [4] | SPACER | |
| 2. | 3G-8900 | [4] | PIN | |
| 3. | 4J-0805 B | [12] | WASHER (1.781X2.5X0.12-IN THK) | |
| 4. | 4T-0231 | [4] | RETAINER | |
| 5. | 4Y-4904 B | [8] | WASHER | |
| 6. | 6Y-4027 | [2] | PIN | |
| 7. | 9J-2365 | [2] | RETAINER | |
| 8. | 104-4817 | [1] | PIN | |
| 9. | 223-3279 | [1] | RETAINER | |
| 10. | 226-7191 | [1] | RETAINER | |
| 11. | 226-7192 | [2] | SPACER (50.8X57.15X25-MM THK) | |
| 12. | 229-1516 | [2] | SPACER (64X72X18-MM THK) | |
| 13. | 245-1168 | [1] | PIN | |
| 14. | 293-8901 | [1] | FRAME AS | |
| 14A. | 293-8899 | [1] | TRUNNION AS | |
| 15. | 105-3015 | [2] | BUSHING | |
| 16. | 3E-6757 | [4] | SEAL-LIP TYPE | |
| 17. | 7X-0515 | [2] | WASHER-HARD (17X35X5-MM THK) | |
| 18. | 7X-2553 M | [1] | BOLT (M16X2X40-MM) | |
| 19. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 20. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 21. | 8T-4193 M | [1] | BOLT (M16X2X50-MM) | |
| 22. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#M00797900205
284-0569: LINES GP-GREASE
For full view, you need register
Parts for your 527 TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5B-0935 C | [5] | FITTING-GREASE | |
| 2. | 5K-9243 | [10] | ELBOW-FLARED | |
| 3. | 5P-5461 C | [5] | NUT (1/8-27-THD) | |
| 4. | 5P-5463 C | [5] | ADAPTER-LUBRICATION | |
| 7. | 284-3986 | [1] | PLATE | |
| 9. | 284-3988 | [1] | TUBE AS | |
| 10. | 284-3989 | [1] | TUBE AS | |
| 11. | 284-3990 | [1] | TUBE AS | |
| 12. | 284-3991 | [1] | TUBE AS | |
| 13. | 284-3992 | [1] | TUBE AS | |
| 15. | 8M-2772 | [2] | CLIP (LOOP) | |
| 16. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| 18. | 3B-8489 C | [2] | FITTING-GREASE (1/8-27 PTF) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#M00797900206
472-3797: CAB AR-OPEN ROPS
472-3797 CAB AR-OPEN ROPS
S/N J681-UP
S/N J681-UP
For full view, you need register
Parts for your 527 TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8G-3913 Y | [1] | CONTROL GP-DECELERATOR | ||
| Y | [1] | CONTROL GP-GOVERNOR | ||
| 3W-3287 Y | [1] | CONTROL GP-SERVICE BRAKE | ||
| 8G-4330 Y | [1] | CONTROL GP-STEER CLUTCH & BRK | ||
| 135-2673 Y | [1] | CONTROL GP-TRANSMISSION | ||
| 8E-5543 Y | [1] | FLOORPLATE GP | ||
| 148-8949 Y | [1] | INSTRUMENT GP | ||
| 133-7446 Y | [1] | LIGHTING GP-FLOOD | ||
| 135-2179 Y | [1] | LINER GP-CAB | ||
| 9P-9392 Y | [1] | MIRROR GP-REAR VIEW | ||
| 133-4955 Y | [1] | MOUNTING GP-ROPS | ||
| Y | [1] | PANEL GP-SIDE | ||
| Y | [1] | PLATFORM GP | ||
| 133-7451 Y | [1] | SCREEN GP-PROTECTION | ||
| 133-9262 Y | [1] | SEAT GP (VINYL) | ||
| 133-7448 Y | [1] | STEP GP | ||
| Y | SEPARATE ILLUSTRATION | |||
#M00797900207
472-3798: CAB AR-OPEN ROPS
472-3798 CAB AR-OPEN ROPS
S/N J681-UP; J691-UP
S/N J681-UP; J691-UP
For full view, you need register
Parts for your 527 TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8G-3913 Y | [1] | CONTROL GP-DECELERATOR | ||
| Y | [1] | CONTROL GP-GOVERNOR | ||
| 3W-3287 Y | [1] | CONTROL GP-SERVICE BRAKE | ||
| 8G-4330 Y | [1] | CONTROL GP-STEER CLUTCH & BRK | ||
| 135-2673 Y | [1] | CONTROL GP-TRANSMISSION | ||
| 8E-5543 Y | [1] | FLOORPLATE GP | ||
| 148-8949 Y | [1] | INSTRUMENT GP | ||
| 134-9649 Y | [1] | LIGHTING GP-FLOOD | ||
| 135-2179 Y | [1] | LINER GP-CAB | ||
| 9P-9392 Y | [1] | MIRROR GP-REAR VIEW | ||
| 136-3711 Y | [1] | MOUNTING GP-ROPS | ||
| Y | [1] | PANEL GP-SIDE | ||
| Y | [1] | PLATFORM GP | ||
| 133-7452 Y | [1] | SCREEN GP-PROTECTION | ||
| 133-9262 Y | [1] | SEAT GP (VINYL) | ||
| 133-7448 Y | [1] | STEP GP | ||
| Y | SEPARATE ILLUSTRATION | |||
#M00797900208
8G-3913: CONTROL GP-DECELERATOR
8G-3913 CONTROL GP-DECELERATOR
S/N J681-UP; J691-UP
PART OF 472-3797, 472-3798 CAB AR-OPEN ROPS
S/N J681-UP; J691-UP
PART OF 472-3797, 472-3798 CAB AR-OPEN ROPS
For full view, you need register
Parts for your 527 TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9S-1303 | [2] | PIN | |
| 2. | 3B-4607 C | [2] | PIN-COTTER | |
| 3. | 8M-6701 BC | [5] | WASHER (0.281X0.5X0.032-IN THK) | |
| 4. | 8T-0798 | [2] | BEARING-ROLLER | |
| 5. | 8T-0741 | [2] | SEAL-LIP TYPE | |
| 6. | 1A-4790 | [2] | WASHER (16.7X31.8X1.6-MM THK) | |
| 7. | 3W-0602 | [1] | SHAFT | |
| 8. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 9. | 9G-2341 | [1] | PEDAL | |
| 10. | 3B-4617 C | [1] | PIN-COTTER | |
| 11. | 8T-2502 | [1] | BOLT (3/8-16X1.125-IN) | |
| 12. | 9G-2324 B | [1] | BAR (25MM HOLE TO SLOT) | |
| 13. | 1B-8706 | [1] | KEY-WOODRUFF | |
| 14. | 8G-5240 | [1] | LEVER | |
| 15. | 8T-9375 | [1] | BOLT (3/8-16X1.75-IN) | |
| 16. | 7F-1866 | [1] | BOLT (3/8-16X3-IN) | |
| 17. | 8Y-0581 B | [1] | BAR (22MM HOLE TO SLOT) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#M00797900209
197-2090: CONTROL GP-HANDLE
For full view, you need register
Parts for your 527 TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 100-6651 E | LOOM (60-CM) | ||
| 2. | 8S-5151 | [2] | NUT-JAM | |
| 3. | 186-3735 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 4. | 8T-8737 | [1] | PLUG-SEAL | |
| 5. | 160-3518 | [1] | KIT-RECEPTACLE (8-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6. | 172-5998 | [1] | ROD | |
| 7. | 199-1022 | [1] | BOOT | |
| 8. | 235-8748 | [1] | CONTROL GP-HANDLE | |
| 235-2438 | [6] | SWITCH AS-LIMIT | ||
| 9. | 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | |
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| E | ORDER BY THE CENTIMETER | |||
