BASIC ENGINE
PISTON & ROD GPCYLINDER BLOCK GP
CYLINDER HEAD GP
CYLINDER BLOCK GP
PULLEY GP
DRIVE GP-FAN
VALVE MECHANISM GP
CRANKSHAFT GP
BASIC ENGINE
PISTON & ROD GP#M00799100060
437-7173: PISTON & ROD GP
Parts for your 336F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 524-5566 | [1] | PIN-PISTON | |
| 2. | 490-8380 | [1] | ROD AS-CONNECTING | |
| 160-8197 M | [2] | BOLT (M12X1.25X62-MM) | ||
| 3. | 262-2891 | [1] | RING-PISTON | |
| 4. | 269-7290 | [1] | BEARING-CONNECTING ROD | |
| 5. | 273-2600 | [1] | TUBE AS-OIL JET | |
| 6. | 437-7099 | [1] | BODY AS-PISTON | |
| 7. | 467-1177 | [1] | RING-PISTON | |
| 8. | 447-5626 | [1] | RING-PISTON | |
| 9. | 6V-3940 M | [1] | BOLT (M8X1.25X25-MM) | |
| 10. | 6V-5589 | [2] | RING-RETAINING | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#M00799100061
275-4260: PLUG GP-CYLINDER BLOCK
275-4260 PLUG GP-CYLINDER BLOCK
S/N SYE1-UP
PROVIDES AN O-RING PORT PLUG FOR THE REAR OF THE BLOCK
PART OF 516-4820 ENGINE AR-COMPLETE
FOR USE WITH ENGINES NOT USING A JACKET WATER HEATER
S/N SYE1-UP
PROVIDES AN O-RING PORT PLUG FOR THE REAR OF THE BLOCK
PART OF 516-4820 ENGINE AR-COMPLETE
FOR USE WITH ENGINES NOT USING A JACKET WATER HEATER
Parts for your 336F EXCAVATOR:
CATERPILLAR SIS#M00799100062
275-8699: PLUG GP-CYLINDER BLOCK
275-8699 PLUG GP-CYLINDER BLOCK
S/N SYE1-UP
PROVIDES AN O-RING PORT PLUG FOR THE RH SIDE OF BLOCK
PART OF 516-4820 ENGINE AR-COMPLETE
FOR USE WITH ENGINES NOT USING A BYPASS AUXILIARY COOLER
S/N SYE1-UP
PROVIDES AN O-RING PORT PLUG FOR THE RH SIDE OF BLOCK
PART OF 516-4820 ENGINE AR-COMPLETE
FOR USE WITH ENGINES NOT USING A BYPASS AUXILIARY COOLER
Parts for your 336F EXCAVATOR:
CATERPILLAR SIS#M00799100063
495-5748: PLUG GP-CYLINDER HEAD
#M00799100064
492-4471: PLUG GP-ENGINE
Parts for your 336F EXCAVATOR:
CATERPILLAR SIS#M00799100065
342-7219: PULLEY GP-CRANKSHAFT
342-7219 PULLEY GP-CRANKSHAFT
S/N SYE1-UP
PART OF 516-4820 ENGINE AR-COMPLETE
CANNOT BE USED WITH ENGINE MOUNTED CEM
S/N SYE1-UP
PART OF 516-4820 ENGINE AR-COMPLETE
CANNOT BE USED WITH ENGINE MOUNTED CEM
Parts for your 336F EXCAVATOR:
CATERPILLAR SIS#M00799100066
385-1339: PULLEY GP-FAN
Parts for your 336F EXCAVATOR:
CATERPILLAR SIS#M00799100067
263-0033: ROCKER ARM GP
Parts for your 336F EXCAVATOR:
CATERPILLAR SIS#M00799100068
347-8782: ROCKER ARM GP
Parts for your 336F EXCAVATOR:
CATERPILLAR SIS#M00799100069
295-2351: SEAL GP-CRANKSHAFT
Parts for your 336F EXCAVATOR:
CATERPILLAR SISInformation:
BASIC ENGINE
PISTON & ROD GP
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Reuse And Salvage Guidelines
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Disassembly and Assembly