ELECTRICAL AND STARTING SYSTEM
SOLENOID GP-SHUTOFFSTARTING MOTOR GP
SWITCH GP
WIRING GP
SWITCH GP
HORN GP-ELECTRIC
WIRING GP
ELECTRICAL AND STARTING SYSTEM
SOLENOID GP-SHUTOFF
#M00824060120
322-4928: SOLENOID GP-SHUTOFF
For full view, you need register
Parts for your 216B3 SKID STEER LOADER:
CATERPILLAR SIS#M00824060121
322-4917: STARTING MOTOR GP-ELECTRIC
322-4917 STARTING MOTOR GP-ELECTRIC
S/N CZ21-UP
PART OF 521-6796 ENGINE AR-PRIMARY
S/N CZ21-UP
PART OF 521-6796 ENGINE AR-PRIMARY
For full view, you need register
Parts for your 216B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 323-6614 | [1] | STARTER-MOTOR | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#M00824060122
315-7819: SWITCH GP-PRESSURE
315-7819 SWITCH GP-PRESSURE -ENGINE OIL
S/N CZ21-UP
PART OF 433-1379 ENGINE AR, 521-6796 ENGINE AR-PRIMARY
S/N CZ21-UP
PART OF 433-1379 ENGINE AR, 521-6796 ENGINE AR-PRIMARY
For full view, you need register
Parts for your 216B3 SKID STEER LOADER:
CATERPILLAR SIS#M00824060123
308-2317: SWITCH GP-TEMPERATURE
For full view, you need register
Parts for your 216B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 341-3600 | [1] | SWITCH-TEMPERATURE (ENGINE COOLANT) |
#M00824060124
445-5882: WIRING GP-CAB
445-5882 WIRING GP-CAB -BACK
S/N SL31-UP
PART OF 326-5450, 376-3481 CAB AR
AN ATTACHMENT
S/N SL31-UP
PART OF 326-5450, 376-3481 CAB AR
AN ATTACHMENT
For full view, you need register
Parts for your 216B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 2. | 7G-1060 | [1] | STRAP AS-GROUND | |
| 3. | 7K-1181 | [11] | STRAP-CABLE | |
| 4. | 8F-7242 | [3] | WASHER (8.7X15.9X1.6-MM THK) | |
| 5. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 6. | 116-7471 | [1] | PULLER-MINIFUSE | |
| 7. | 180-9900 | [1] | CAP AS | |
| 5P-7958 | [1] | SLEEVE-CABLE SPLICE | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 179-9392 | [1] | LANYARD | ||
| 8. | 258-4135 Y | [2] | RELAY GP (12-VOLT)(MAIN POWER) | |
| 9. | 258-4136 | [1] | FUSE AS | |
| 267-2680 | [2] | FUSE (20-AMPERE)(POWER MODULE) | ||
| 267-5211 | [1] | SEAL | ||
| 267-5213 | [1] | COVER | ||
| 10. | 258-4138 | [1] | FILM-INFORMATION (POWER DISTRIBUTION) | |
| 11. | 258-4143 | [1] | BAR-BUS | |
| 12. | 258-4196 | [2] | WIRE AS (10-GA) | |
| 13. | 267-2680 | [2] | FUSE (20-AMPERE)(FUSE BLOCK) | |
| 14. | 328-2345 Y | [1] | ELECTRONICS GP-MACHINE | |
| 15. | 343-6885 | [1] | FILM-IDENTIFICATION (FUSE, RELAY PANEL) | |
| 16. | 396-0690 Y | [1] | HARNESS AS-CAB | |
| 17. | 435-4593 | [1] | FILM-IDENTIFICATION (FUSE, RELAY PANEL) | |
| 18. | 132-5789 | [1] | CLIP (LADDER) | |
| 19. | 1A-8912 | [10] | WASHER (6.7X12.7X1.6-MM THK) | |
| 20. | 1H-3244 | [4] | LOCKWASHER | |
| 21. | 3S-2093 | [5] | STRAP-CABLE | |
| 22. | 4P-7581 | [2] | CLIP (LADDER) | |
| 23. | 4P-8134 | [2] | CLIP (LADDER) | |
| 24. | 5C-2890 M | [10] | NUT (M6X1-THD) | |
| 25. | 5C-7261 M | [7] | NUT (M8X1.25-THD) | |
| 26. | 5P-7162 | [8] | SCREW-MACHINE (10-32X0.5-IN) | |
| 27. | 6V-7728 M | [3] | BOLT (M6X1X45-MM) | |
| 28. | 7G-7053 | [1] | GROMMET | |
| 29. | 7P-1695 | [2] | WASHER (10.5X19X3-MM THK) | |
| 30. | 7X-0579 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 31. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 32. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 33. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 34. | 103-2543 E | SEAL (3-CM EACH) | ||
| 35. | 9X-2092 E | TRIM-EDGE (15-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00824060125
328-2350: WIRING GP-CHASSIS
For full view, you need register
Parts for your 216B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [20] | STRAP-CABLE | |
| 2. | 8M-4963 | [1] | STRAP AS-GROUND | |
| 3. | 161-2539 | [1] | ALARM AS (BACKUP)(TRAVEL) | |
| 4B-2043 | [2] | NUT (8-32-THD) | ||
| 4. | 178-7539 | [1] | RECEPTACLE AS (POWER SUPPLY) | |
| 5. | 192-0836 | [1] | SWITCH GP-PRESSURE (BACKUP ALARM) | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 6. | 235-1845 | [1] | FUSE (100-AMPERE)(MAIN) | |
| 7. | 267-2744 | [1] | HOLDER AS-FUSE | |
| 5C-7261 M | [2] | NUT (M8X1.25-THD) | ||
| 7X-0608 | [2] | WASHER-HARD (10.2X16X2-MM THK) | ||
| 264-3617 | [2] | LOCKWASHER | ||
| 267-2746 | [1] | COVER AS | ||
| 8. | 374-7463 B | [2] | CAP-SEAL | |
| 9. | 374-7465 B | [3] | CAP-SEAL | |
| 11. | 374-7467 B | [1] | CAP-SEAL | |
| 12. | 328-2340 Y | [1] | HARNESS AS-LIGHTING (REAR) | |
| 13. | 373-6259 Y | [1] | HARNESS AS-PLATFORM | |
| 14. | 132-5789 | [3] | CLIP (LADDER) | |
| 15. | 208-9277 M | [2] | BOLT-FLANGE HEAD (M6X1X20-MM) | |
| 16. | 3S-2093 | [15] | STRAP-CABLE | |
| 18. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 19. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 20. | 6V-7728 M | [2] | BOLT (M6X1X45-MM) | |
| 21. | 8F-7242 | [1] | WASHER (8.7X15.9X1.6-MM THK) | |
| 22. | 7P-1695 | [3] | WASHER (10.5X19X3-MM THK) | |
| 23. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 24. | 3F-9556 | [1] | LOCKWASHER | |
| 25. | 189-0852 | [2] | HARNESS AS-WIRING (SPEED SENSOR) | |
| (EACH INCLUDES) | ||||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-1813 E | SLEEVE (16-CM) | |||
| 194-5226 | [2] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [2] | WIRE AS (14-GA) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00824060126
328-2338: WIRING GP-ENGINE
For full view, you need register
Parts for your 216B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7G-1060 | [1] | STRAP AS-GROUND | |
| 2. | 7K-1181 | [7] | STRAP-CABLE | |
| 3. | 115-1615 | [1] | RELAY AS (12-VOLT)(START) | |
| 3A. | 115-1615 | [1] | RELAY AS (12-VOLT)(COLD START) | |
| 4. | 172-9200 | [1] | SUPPRESSOR-ARC | |
| 5. | 326-9515 | [1] | CABLE AS-BATTERY (POSITIVE) | |
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 8N-1725 | [1] | COVER AS-TERMINAL (RED) | ||
| 3S-6049 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 159-8049 E | CABLE (00-GA, RED)(27-CM) | |||
| 6. | 328-2339 | [1] | HARNESS AS-ENGINE | |
| 289-3195 E | CONDUIT (148-CM) | |||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 176-1477 | [1] | PLUG AS (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 9X-1054 | [2] | PLUG AS-CONNECTOR (4-PIN) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 238-9397 | [1] | RESISTOR AS | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 185-1861 | [2] | SEAL-WIRE | ||
| 180-9340 | [6] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 186-3736 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [5] | STRAP-CABLE | ||
| 189-3158 | [1] | SUPPRESSOR-ARC | ||
| 2L-8065 | [1] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 5P-1478 | [1] | TERMINAL-FORK (10-GA TO 12-GA, NO. 10 SCREW) | ||
| 9G-4336 | [3] | TERMINAL-RING (4-GA, 3/8-IN SCREW) | ||
| 7N-9017 | [2] | TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW) | ||
| [1] | TERMINAL AS | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(5-CM) | |||
| 9X-1055 | [4] | TERMINAL-RECEPTACLE (12-GA) | ||
| 9X-1056 | [2] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 100-5041 | [2] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(8-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 7. | 104-6202 | [1] | CLIP (LADDER) | |
| 8. | 141-5453 M | [1] | BOLT (M14X1.5X30-MM) | |
| 9. | 1H-3244 | [1] | LOCKWASHER | |
| 10. | 208-9277 M | [2] | BOLT-FLANGE HEAD (M6X1X20-MM) | |
| 12. | 3S-2093 | [3] | STRAP-CABLE | |
| 13. | 4P-8134 | [1] | CLIP (LADDER) | |
| 14. | 5C-2874 M | [2] | NUT (M5X0.8-THD) | |
| 15. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 16. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 17. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 18. | 8F-7242 | [1] | WASHER (8.7X15.9X1.6-MM THK) | |
| 19. | 6C-9081 | [2] | LOCKWASHER | |
| 20. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
| 21. | 7P-1695 | [1] | WASHER (10.5X19X3-MM THK) | |
| 22. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 23. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 25. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 26. | 1A-8912 | [1] | WASHER (6.7X12.7X1.6-MM THK) | |
| 27. | 3F-9556 | [1] | LOCKWASHER | |
| 28. | 178-3620 | [1] | STRAP-DUAL CLAMP | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#M00824060127
328-2338: WIRING GP-ENGINE
For full view, you need register
Parts for your 216B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [4] | STRAP-CABLE | |
| 2. | 7G-1060 | [1] | STRAP AS-GROUND | |
| 3. | 7K-1181 C | [8] | STRAP-CABLE | |
| 4. | 115-1615 | [1] | RELAY AS (12-VOLT)(START) | |
| 4A. | 115-1615 | [1] | RELAY AS (12-VOLT)(COLD START) | |
| 5. | 172-9200 | [1] | SUPPRESSOR-ARC | |
| 6. | 539-5879 CY | [1] | HARNESS AS-ENGINE | |
| 7. | 539-5880 C | [1] | CABLE AS-POSITIVE | |
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 8N-1725 | [1] | COVER AS-TERMINAL (RED) | ||
| 8T-9758 | [1] | TERMINAL AS (POSITIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 030-1708 | [1] | TERMINAL-RING (0-GA) | ||
| 159-8047 E | CABLE-ELECTRICAL (0-GA, RED)(33-CM) | |||
| 8. | 104-6202 | [1] | CLIP (LADDER) | |
| 9. | 141-5453 M | [1] | BOLT (M14X1.5X30-MM) | |
| 10. | 1A-8912 C | [2] | WASHER (6.7X12.7X1.6-MM THK) | |
| 11. | 1H-3244 | [1] | LOCKWASHER | |
| 12. | 208-9277 M | [2] | BOLT-FLANGE HEAD (M6X1X20-MM) | |
| 13. | 3F-9556 | [1] | LOCKWASHER | |
| 14. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
| 15. | 4P-8134 | [1] | CLIP (LADDER) | |
| 16. | 5C-2874 M | [2] | NUT (M5X0.8-THD) | |
| 17. | 5C-2890 CM | [2] | NUT (M6X1-THD) | |
| 18. | 5C-7261 CM | [2] | NUT (M8X1.25-THD) | |
| 19. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 20. | 1H-0159 | [2] | LOCKWASHER | |
| 21. | 7P-1695 | [1] | WASHER (10.5X19X3-MM THK) | |
| 22. | 8F-7242 C | [2] | WASHER (8.7X15.9X1.6-MM THK) | |
| 23. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 24. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 25. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00824060128
230-3743: WIRING GP-HORN
230-3743 WIRING GP-HORN -WITH MOUNTING
S/N SL31-UP
PART OF 432-2228 CONVERSION AR-MACHINE
AN ATTACHMENT
S/N SL31-UP
PART OF 432-2228 CONVERSION AR-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your 216B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 3. | 142-8833 | [1] | SPACER (11X14.3X9-MM THK) | |
| 4. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 5. | 186-3362 | [1] | HARNESS AS-CHASSIS (HORN) | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 6. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| M | METRIC PART | |||
#M00824060129
328-2342: WIRING GP-MACHINE
328-2342 WIRING GP-MACHINE -DEMAND FAN
S/N SL31-UP
PART OF 356-1901 MOTOR AR-HYDRAULIC FAN
AN ATTACHMENT
S/N SL31-UP
PART OF 356-1901 MOTOR AR-HYDRAULIC FAN
AN ATTACHMENT
For full view, you need register
Parts for your 216B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 328-2341 | [1] | HARNESS AS-SOLENOID (DEMAND FAN) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 2. | 3S-2093 | [5] | STRAP-CABLE | |
| 3. | 4P-8134 | [1] | CLIP (LADDER) | |
| 4. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 5. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| M | METRIC PART | |||
Information:
Caterpillar Parts SIS Catalog 216B3 :
Truck sale:
17,695
Caterpillar 216B3, Skid Steer Loaders, Construction
- Skid Steer Loaders
CATERPILLAR FINANCIAL SERVICES CORPORATION
- Skid Steer Loaders
CATERPILLAR FINANCIAL SERVICES CORPORATION
