AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

269-3410 WIRING GP-HEATER S/N TXD10441-UP PART OF 457-5115 ENGINE AR-COMPLETE 336D2 EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 336D2 EXCAVATOR DGR
 336D2 L Excavator DGR00001-UP (MACHINE) POWERED BY C9 Engine M0083121 336D2 DGR   (2017)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-ELECTRONIC CONTROL
397-9363 WIRING GP-ELECTRONIC CONTROL
WIRING GP-FUEL PUMP
455-6219 WIRING GP-FUEL PUMP
WIRING GP-HEATER
269-3410 WIRING GP-HEATER
WIRING GP-PLATFORM
460-7497 WIRING GP-PLATFORM
WIRING GP-REFUELING PUMP
452-5723 WIRING GP-REFUELING PUMP
 

#M00831210200
 

269-3410: WIRING GP-HEATER

269-3410 WIRING GP-HEATER
S/N TXD10441-UP
PART OF 457-5115 ENGINE AR-COMPLETE
i02549870 M0083121
2693410 WIRING GP-HEATER Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 398-0940 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER RELAY)  
3. 224-1377 [1] CABLE AS  
4. 283-1226 [1] BRACKET AS  
5. 208-9277 M [2] BOLT-FLANGE HEAD (M6X1X20-MM)  
6. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
7. 6V-6317 M [1] BOLT (M10X1.5X20-MM)  
8. 6V-4248 M [1] BOLT (M10X1.5X25-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00831210201
 

460-7497: WIRING GP-PLATFORM

460-7497 WIRING GP-PLATFORM
S/N DGR1-UP
PART OF 454-6466 OPERATOR AR
i07033922 M0083121
4607497 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-2342 [1] STRAP AS-GROUND  
2. 3E-5169 [1] GUARD-SWITCH  
3. 3S-2093 [9] STRAP-CABLE  
4. 7K-1181 [15] STRAP-CABLE  
5. 111-4836 [5] CLIP  
6. 111-4839 [2] STRAP  
7. 116-0118 [12] CLIP  
8. 234-1122 [1] COVER  
9. 251-0299 [1] HARNESS AS-SWITCH (SECONDARY SHUTDOWN)  
  2L-8074 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
10. 468-7756 [1] HARNESS AS-PLATFORM  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [10] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8730 [18] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [26] STRAP-CABLE  
  8N-1546 [1] PIN-CONNECTOR (6-GA)  
  8T-8737 [41] PLUG-SEAL  
  102-7964 [1] PLUG-CONNECTOR (16-PIN)  
  102-7965 [19] TERMINAL (FEMALE)  
  9W-0852 [8] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [25] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  116-0255 [1] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  121-1039 [1] TERMINAL (MALE)  
  121-1168 [2] CONNECTOR-RECEPTACLE  
  121-1173 [30] TERMINAL (MALE)  
  125-4766 [1] PLUG-CONNECTOR (17-PIN)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(45-CM)  
  9X-3402 [66] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [66] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  127-5484 [1] RECEPTACLE AS-CONNECTOR (1-PIN)  
  2L-8050 [1] TERMINAL-RING (6-GA, 1/4-IN SCREW)  
    -OR-
  2L-8058 [1] TERMINAL-RING (8-GA, 1/4-IN SCREW)  
  2L-8052 [2] TERMINAL-RING (6-GA, 3/8-IN SCREW)  
    -OR-
  2L-8060 [2] TERMINAL-RING (8-GA, 3/8-IN SCREW)  
  2L-8069 [1] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  134-3296 [1] HOUSING-PLUG  
  134-3297 [2] SEAL  
  9X-3401 [22] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [22] PIN-CONNECTOR (14-GA TO 16-GA)  
  153-2620 [1] PLUG AS-CONNECTOR (54-PIN, BLACK)  
  163-6759 [1] SEAL  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4009 [2] PLUG AS-CONNECTOR (12-PIN)  
    (EACH INCLUDES)
  455-0709 [1] SEAL-CONNECTOR  
  230-4011 [8] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  455-0704 [1] SEAL-CONNECTOR  
  239-7352 [2] PLUG AS-CONNECTOR (6-PIN)  
  230-5010 [2] PLUG AS-CONNECTOR (6-PIN)  
    (EACH PLUG AS INCLUDES)
  455-0707 [1] SEAL-CONNECTOR  
  237-0227 [4] PLUG AS-CONNECTOR (3-PIN)  
    (EACH INCLUDES)
  455-0705 [1] SEAL-CONNECTOR  
  238-2363 [10] TERMINAL (FEMALE)  
  238-2366 [6] TERMINAL (MALE)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  243-4508 [2] RECEPTACLE AS-CONNECTOR (6-PIN)  
  243-4509 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  243-4510 [2] RECEPTACLE AS-CONNECTOR (12-PIN)  
  342-2972 [3] CAP-CONNECTOR (2-PIN)  
  342-2973 [2] CAP-CONNECTOR (3-PIN)  
  342-2974 [3] CAP-CONNECTOR (6-PIN)  
11. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
12. 111-4838 [2] CLIP  
13. 199-7854 [1] SPACER (11.8X20X45-MM THK)  
14. 4D-1836 [1] SWITCH-TOGGLE (SECONDARY SHUTDOWN)  
15. 7X-2621 M [7] BOLT (M10X1.5X12-MM)  
16. 8T-0337 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
17. 8T-4121 [16] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
19. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#M00831210202
 

452-5723: WIRING GP-REFUELING PUMP

452-5723 WIRING GP-REFUELING PUMP -FUEL TRANSFER
S/N DGR1-UP
PART OF 456-1066 PUMP AR-FUEL TRANSFER
i06981995 M0083121
4525723 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [17] STRAP-CABLE  
2. 7K-1181 [7] STRAP-CABLE  
3. 9X-3495 [1] CLIP AS  
4. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
4A. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
5. 213-0772 [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
6. 238-1579 [1] HARNESS AS-PUMP (REFUELING)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8730 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [1] PLUG-SEAL  
  116-0126 [1] HOUSING-PLUG  
  116-0128 [2] SEAL  
  116-0255 [2] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  121-1038 [1] HOUSING-RECEPTACLE  
  121-1039 [2] TERMINAL (MALE)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  149-5051 [2] CONNECTOR-RECEPTACLE  
  149-5069 [4] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [4] TERMINAL-BLADE (16-GA TO 20-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [1] DIODE  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
7. 238-1594 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)  
8. 238-1596 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)  
9. 275-6993 [1] COVER  
10. 452-5724 [1] HARNESS AS-WIRING (REFUELING PUMP RELAY)  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  455-0704 [1] SEAL-CONNECTOR  
11. 096-2591 M [2] SCREW-MACHINE (M5X0.8X35-MM)  
12. 7X-2619 M [2] BOLT (M6X1X10-MM)  
13. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
14. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
15. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
16. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00831210203
 

501-7238: DRIVE GP-FINAL

501-7238 DRIVE GP-FINAL -LH
S/N DGR1-UP
WITHOUT MOTOR
PART OF 501-7239 DRIVE GP-FINAL
i06841234 M0083121
5017238 DRIVE GP-FINAL Parts scheme 5017238 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 094-0577 B [1] PLATE (7-MM THK)  
  094-0578 B [1] PLATE (8-MM THK)  
  094-0579 B [1] PLATE (9-MM THK)  
  094-0580 B [1] PLATE (10-MM THK)  
2. 7M-8485 [2] SEAL-O-RING  
3. 7Y-0595 [2] SPACER (58X79.6X6-MM THK)  
4. 7Y-5217 M [30] BOLT-SOCKET HEAD (M20X2.5X70-MM)  
5. 136-2898 [14] WASHER (58.3X89X1-MM THK)  
6. 191-2645 [1] COUPLING  
7. 191-2690 [6] WASHER (42.3X70X1-MM THK)  
8. 227-6192 [1] GEAR-COUPLING  
9. 255-2272 [1] SEAL GP-DUO-CONE  
  205-9114 [2] RING-TORIC  
10. 295-9234 [1] SEAL-O-RING  
11. 296-6181 [1] HOUSING  
12. 296-6183 [1] CARRIER-PLANETARY  
13. 296-6184 [4] GEAR-PLANETARY (21-TEETH)  
14. 296-6185 [4] SHAFT  
15. 296-6186 [3] GEAR-PLANETARY (21-TEETH)  
16. 296-6189 [1] GEAR-SUN (20-TEETH)  
17. 296-6190 [1] GEAR-SUN (20-TEETH)  
18. 296-6192 [1] SPACER (143X170X8-MM THK)  
19. 296-6194 [1] CARRIER-PLANETARY  
20. 296-6195 [3] SHAFT  
21. 296-6230 [3] GEAR-PLANETARY (21-TEETH)  
22. 296-6231 [1] GEAR-SUN (20-TEETH)  
23. 296-6232 [1] CARRIER AS  
24. 296-6311 [1] GEAR-RING (64-TEETH)  
25. 451-2176 [30] WASHER-HARD (22X35X3.5-MM THK)  
26. 452-3519 [1] HOUSING-MOTOR  
27. 470-7587 [1] COVER  
28. 501-7237 [1] GASKET  
29. 093-1731 [2] RING-RETAINING  
30. 095-0891 [7] PIN-SPRING  
31. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
32. 096-8058 [3] RING-RETAINING  
33. 114-1541 [6] PIN-DOWEL  
34. 143-0811 M [16] BOLT (12X1.75X35-MM)  
35. 267-6809 B [1] SHIM (0.75-MM THK)  
  267-6810 B [1] SHIM (0.85-MM THK)  
  267-6811 B [1] SHIM (0.9-MM THK)  
  267-6812 B [1] SHIM (0.95-MM THK)  
  267-6813 B [1] SHIM (1.2-MM THK)  
  267-6814 B [1] SHIM (1.4-MM THK)  
  267-6815 B [1] SHIM (1.8-MM THK)  
  267-6816 B [1] SHIM (2-MM THK)  
  267-6817 B [1] SHIM (2.3-MM THK)  
  7Y-1056 B [1] SHIM (0.8-MM THK)  
  7Y-1057 B [1] SHIM (1-MM THK)  
36. 279-0344 [2] BEARING AS-TAPERED ROLLER  
37. 296-6247 [11] BEARING AS-ROLLER  
38. 296-6248 [3] BEARING AS-ROLLER  
39. 3E-2338 [2] PLUG-PIPE  
40. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
41. 6V-8133 M [10] BOLT (M24X3X80-MM)  
42. 6V-8237 [10] WASHER (26X44X4-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#M00831210204
 

501-7239: DRIVE GP-FINAL

501-7239 DRIVE GP-FINAL -WITH MOTOR, LH
S/N DGR1-UP
PART OF 518-3386 DRIVE GP-FINAL
i06870720 M0083121
5017239 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 322-8729 Y [1] MOTOR & MTG GP-TRAVEL  
2. 501-7238 Y [1] DRIVE GP-FINAL  
3. 096-5348 M [1] SETSCREW-SOCKET (M12X1.75-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00831210205
 

511-6010: DRIVE GP-FINAL

511-6010 DRIVE GP-FINAL -WITH MOTOR, RH
S/N DGR1-UP
PART OF 525-2615 DRIVE GP-FINAL
i07394941 M0083121
5116010 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 511-6011 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR, RH)  
2. Y [1] MOTOR & MTG GP-TRAVEL  
3. 096-5348 M [1] SETSCREW-SOCKET (M12X1.75-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00831210206
 

511-6011: DRIVE GP-FINAL

511-6011 DRIVE GP-FINAL -WITHOUT MOTOR, RH
S/N DGR1-UP
PART OF 511-6010 DRIVE GP-FINAL
i07394940 M0083121
5116011 DRIVE GP-FINAL Parts scheme 5116011 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 094-0577 [1] PLATE (7-MM THK)  
2. 094-0578 [1] PLATE (8-MM THK)  
3. 094-0579 [1] PLATE (9-MM THK)  
4. 094-0580 [1] PLATE (10-MM THK)  
5. 136-2898 [14] WASHER (58.3X89X1-MM THK)  
6. 191-2690 [6] WASHER (42.3X70X1-MM THK)  
7. 227-6192 [1] GEAR-COUPLING  
8. 255-2272 [1] SEAL GP-DUO-CONE  
  205-9114 [2] RING-TORIC  
9. 295-9234 [1] SEAL-O-RING  
10. 296-6181 [1] HOUSING  
11. 296-6183 [1] CARRIER-PLANETARY  
12. 296-6184 [4] GEAR-PLANETARY (21-TEETH)  
13. 296-6185 [4] SHAFT  
14. 296-6186 [3] GEAR-PLANETARY (21-TEETH)  
15. 296-6189 [1] GEAR-SUN (20-TEETH)  
16. 296-6190 [1] GEAR-SUN (20-TEETH)  
17. 296-6192 [1] SPACER (143X170X8-MM THK)  
18. 296-6194 [1] CARRIER-PLANETARY  
19. 296-6195 [3] SHAFT  
20. 296-6230 [3] GEAR-PLANETARY (21-TEETH)  
21. 296-6231 [1] GEAR-SUN (20-TEETH)  
22. 296-6232 [1] CARRIER AS  
23. 296-6311 [1] GEAR-RING (64-TEETH)  
24. 451-2176 [30] WASHER-HARD (22X35X3.5-MM THK)  
25. 452-3518 [1] HOUSING-MOTOR  
26. 470-7587 [1] COVER  
27. 501-7237 [1] GASKET  
28. 507-8035 [1] COUPLING  
29. 093-1731 [2] RING-RETAINING  
30. 095-0891 [7] PIN-SPRING  
31. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
32. 096-8058 [3] RING-RETAINING  
33. 114-1541 [6] PIN-DOWEL  
34. 143-0811 M [16] BOLT (12X1.75X35-MM)  
35. 267-6809 B [1] SHIM (0.75-MM THK)  
  267-6810 B [1] SHIM (0.85-MM THK)  
  267-6811 B [1] SHIM (0.9-MM THK)  
  267-6812 B [1] SHIM (0.95-MM THK)  
  267-6813 B [1] SHIM (1.2-MM THK)  
  267-6814 B [1] SHIM (1.4-MM THK)  
  267-6815 B [1] SHIM (1.8-MM THK)  
  267-6816 B [1] SHIM (2-MM THK)  
  267-6817 B [1] SHIM (2.3-MM THK)  
  7Y-1056 B [1] SHIM (0.8-MM THK)  
  7Y-1057 B [1] SHIM (1-MM THK)  
44. 279-0344 [2] BEARING AS-TAPERED ROLLER  
45. 296-6247 [11] BEARING AS-ROLLER  
46. 296-6248 [3] BEARING AS-ROLLER  
47. 3E-2338 [2] PLUG-PIPE  
48. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 6V-8133 M [10] BOLT (M24X3X80-MM)  
50. 6V-8237 [10] WASHER (26X44X4-MM THK)  
51. 7M-8485 [2] SEAL-O-RING  
52. 7Y-0595 [2] SPACER (58X79.6X6-MM THK)  
55. 7Y-5217 M [30] BOLT-SOCKET HEAD (M20X2.5X70-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#M00831210207
 

511-6017: DRIVE GP-FINAL

511-6017 DRIVE GP-FINAL -WITH MOTOR, LH
S/N DGR1-UP
PART OF 525-2614 DRIVE GP-FINAL
i07394933 M0083121
5116017 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 511-6018 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR, LH)  
2. Y [1] MOTOR & MTG GP-TRAVEL  
3. 096-5348 M [1] SETSCREW-SOCKET (M12X1.75-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00831210208
 

511-6018: DRIVE GP-FINAL

511-6018 DRIVE GP-FINAL -WITHOUT MOTOR, LH
S/N DGR1-UP
PART OF 511-6017 DRIVE GP-FINAL
i07394932 M0083121
5116018 DRIVE GP-FINAL Parts scheme 5116018 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 094-0577 [1] PLATE (7-MM THK)  
2. 094-0578 [1] PLATE (8-MM THK)  
3. 094-0579 [1] PLATE (9-MM THK)  
4. 094-0580 [1] PLATE (10-MM THK)  
5. 136-2898 [14] WASHER (58.3X89X1-MM THK)  
6. 191-2690 [6] WASHER (42.3X70X1-MM THK)  
7. 227-6192 [1] GEAR-COUPLING  
8. 255-2272 [1] SEAL GP-DUO-CONE  
  205-9114 [2] RING-TORIC  
9. 295-9234 [1] SEAL-O-RING  
10. 296-6181 [1] HOUSING  
11. 296-6183 [1] CARRIER-PLANETARY  
12. 296-6184 [4] GEAR-PLANETARY (21-TEETH)  
13. 296-6185 [4] SHAFT  
14. 296-6186 [3] GEAR-PLANETARY (21-TEETH)  
15. 296-6189 [1] GEAR-SUN (20-TEETH)  
16. 296-6190 [1] GEAR-SUN (20-TEETH)  
17. 296-6192 [1] SPACER (143X170X8-MM THK)  
18. 296-6194 [1] CARRIER-PLANETARY  
19. 296-6195 [3] SHAFT  
20. 296-6230 [3] GEAR-PLANETARY (21-TEETH)  
21. 296-6231 [1] GEAR-SUN (20-TEETH)  
22. 296-6232 [1] CARRIER AS  
23. 296-6311 [1] GEAR-RING (64-TEETH)  
24. 451-2176 [30] WASHER-HARD (22X35X3.5-MM THK)  
25. 452-3519 [1] HOUSING-MOTOR  
26. 470-7587 [1] COVER  
27. 501-7237 [1] GASKET  
28. 507-8035 [1] COUPLING  
29. 093-1731 [2] RING-RETAINING  
30. 095-0891 [7] PIN-SPRING  
31. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
32. 096-8058 [3] RING-RETAINING  
33. 114-1541 [6] PIN-DOWEL  
34. 143-0811 M [16] BOLT (12X1.75X35-MM)  
35. 267-6809 B [1] SHIM (0.75-MM THK)  
  267-6810 B [1] SHIM (0.85-MM THK)  
  267-6811 B [1] SHIM (0.9-MM THK)  
  267-6812 B [1] SHIM (0.95-MM THK)  
  267-6813 B [1] SHIM (1.2-MM THK)  
  267-6814 B [1] SHIM (1.4-MM THK)  
  267-6815 B [1] SHIM (1.8-MM THK)  
  267-6816 B [1] SHIM (2-MM THK)  
  267-6817 B [1] SHIM (2.3-MM THK)  
  7Y-1056 B [1] SHIM (0.8-MM THK)  
  7Y-1057 B [1] SHIM (1-MM THK)  
44. 279-0344 [2] BEARING AS-TAPERED ROLLER  
45. 296-6247 [11] BEARING AS-ROLLER  
46. 296-6248 [3] BEARING AS-ROLLER  
47. 3E-2338 [2] PLUG-PIPE  
48. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 6V-8133 M [10] BOLT (M24X3X80-MM)  
50. 6V-8237 [10] WASHER (26X44X4-MM THK)  
51. 7M-8485 [2] SEAL-O-RING  
52. 7Y-0595 [2] SPACER (58X79.6X6-MM THK)  
55. 7Y-5217 M [30] BOLT-SOCKET HEAD (M20X2.5X70-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#M00831210209
 

518-3386: DRIVE GP-FINAL

518-3386 DRIVE GP-FINAL -WITH MOTOR, SPROCKET, LH
S/N DGR1-UP
PART OF 486-7850 POWER TRAIN AR
i06870730 M0083121
5183386 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 168-6727 Y [1] SPROCKET GP (NON-SEGMENTED)  
2. 501-7239 Y [1] DRIVE GP-FINAL (WITH MOTOR, LH)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Battery - Recycle
336D2 and 340D2 Excavators
Battery Disconnect Switch
336D2 and 340D2 Excavators
Battery or Battery Cable - Inspect/Replace
336D2 and 340D2 Excavators
Fuses - Replace
336D2 and 340D2 Excavators
Power Receptacle - If Equipped
336D2 and 340D2 Excavators
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Procedure to Install <NOBR>471-6909</NOBR> Chassis Wiring Gp on Certain Hydraulic Excavators {1408}
Procedure to Install 471-6909 Chassis Wiring Gp on Certain Hydraulic Excavators {1408}
Systems Operation
Switches
336D2 and 340D2 Excavators Tool Control System
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines
Sensors
336D2 and 340D2 Excavators Tool Control System
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
C9 Engines for Caterpillar Built Machines
Overload Warning - Set - If Equipped
336D2 and 340D2 Excavators Hydraulic System
Troubleshooting
Electrical Connectors - Inspect
C9.3 Engines for Caterpillar Built Machines
Electrical Connectors
C9.3 Engines for Caterpillar Built Machines
Electrical Connector - Inspect
336D2 and 340D2 Excavators
Connector Locations
336D2 and 340D2 Excavators
Wiring Harness (Open Circuit) - Test
336D2 and 340D2 Excavators
Wiring Harness (Short Circuit) - Test
336D2 and 340D2 Excavators
System Schematic
336D2 and 340D2 Excavators
Connector Contact Description
336D2 and 340D2 Excavators
Service Magazine
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
A New Fan Drive Harness Routing Is Now Used on Certain 336D2 and 340D2 Excavators {1359, 1408}
A New Fan Drive Harness Routing Is Now Used on Certain 336D2 and 340D2 Excavators {1359, 1408}

Caterpillar Parts SIS Catalog 336D2 :

WIRING GP-FUEL PUMP
455-6219 WIRING GP-FUEL PUMP
WIRING GP-ELECTRONIC CONTROL
397-9363 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
397-9363 WIRING GP-ELECTRONIC CONTROL
WIRING GP-CONVERTER
350-8250 WIRING GP-CONVERTER
WIRING GP-CONSOLE
398-7006 WIRING GP-CONSOLE
398-7005 WIRING GP-CONSOLE
WIRING GP-CONSOLE
231-1836 WIRING GP-CONSOLE
WIRING GP-COMMUNICATION
477-9423 WIRING GP-COMMUNICATION
WIRING GP-PLATFORM
460-7497 WIRING GP-PLATFORM
WIRING GP-REFUELING PUMP
452-5723 WIRING GP-REFUELING PUMP
DRIVE GP-FINAL
501-7238 DRIVE GP-FINAL
DRIVE GP-FINAL
501-7239 DRIVE GP-FINAL
DRIVE GP-FINAL
511-6010 DRIVE GP-FINAL
DRIVE GP-FINAL
511-6011 DRIVE GP-FINAL
DRIVE GP-FINAL
511-6017 DRIVE GP-FINAL
DRIVE GP-FINAL
511-6018 DRIVE GP-FINAL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.