FUEL SYSTEM
PUMP GP-FUEL INJECTIONLINES GP-FUEL
TANK GP-FUEL
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGINGBATTERY GP
FUEL SYSTEM
PUMP GP-FUEL INJECTION
#M00832310100
391-4811: PUMP GP-FUEL INJECTION
391-4811 PUMP GP-FUEL INJECTION
S/N M731-UP
PART OF 451-2271 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N M731-UP
PART OF 451-2271 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 930K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 286-0123 M | [4] | BOLT (M10X1.5X35-MM THK) | |
| 2. | 6I-0654 M | [3] | BOLT (M10X1.5X25-MM) | |
| 3. | 371-2684 | [1] | BRACKET | |
| 4. | 371-2691 | [1] | BRACKET | |
| 5. | 371-7263 | [1] | LINE AS-FUEL | |
| 6. | 375-2647 Y | [1] | PUMP GP-FUEL INJECTION | |
| 7. | 476-2947 | [1] | GEAR-FUEL PUMP (68-TEETH) | |
| 8. | 6I-0217 M | [2] | BOLT (M8X1.25X20-MM) | |
| 9. | 346-0006 | [1] | BOLT-SPECIAL | |
| 10. | 346-0007 | [2] | WASHER | |
| 11. | 6I-0594 M | [1] | NUT (M10X1.5-THD) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00832310101
394-9639: RAIL GP-FUEL
For full view, you need register
Parts for your 930K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0260 M | [3] | BOLT (M8X1.25X25-MM) | |
| 2. | 099-6418 M | [1] | NUT (M6X1-THD) | |
| 3. | 206-1826 | [2] | BOLT | |
| 4. | 370-5520 Y | [1] | LINES GP-FUEL INJECTION | |
| 5. | 375-0482 | [4] | CLAMP-PIPE | |
| 6. | 375-0483 | [2] | INSERT-CLAMP | |
| 7. | 375-2649 | [1] | RAIL GP-FUEL | |
| 375-6988 | [1] | SENSOR (FUEL RAIL PRESSURE) | ||
| 398-6226 | [1] | VALVE (FUEL RAIL PRESSURE) | ||
| 8. | 393-2034 | [1] | LINE AS-FUEL | |
| 9. | 393-2035 | [1] | LINE AS-FUEL | |
| 10. | 394-0525 Y | [1] | LINES GP-FUEL INJECTION | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00832310102
447-8041: TANK & MTG GP-FUEL
For full view, you need register
Parts for your 930K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 323-3308 | [2] | CAP | |
| 2. | 323-3309 | [3] | CAP | |
| 3. | 343-1820 | [3] | CLAMP-BAND | |
| 4. | 353-5149 | [1] | ELBOW AS | |
| 2M-9780 | [1] | SEAL-O-RING | ||
| 194-4864 | [1] | ELBOW | ||
| 5. | 362-7976 | [2] | STRAP AS | |
| 6. | 370-9009 | [1] | CAP AS-FUEL (FILLER) | |
| 304-3885 | [1] | CAP-FUEL (FILLER) | ||
| 355-8947 | [1] | BOOT-FUEL CAP | ||
| 7. | 377-7243 | [1] | HOSE | |
| 8. | 377-7244 | [1] | PLATE | |
| 9. | 393-1101 | [1] | STRAINER (FUEL TANK) | |
| 10. | 417-9243 | [1] | GUARD AS (FUEL FILLER) | |
| 11. | 447-8042 Y | [1] | TANK GP-FUEL | |
| 12. | 124-6257 | [2] | CLAMP-HOSE | |
| 13. | 272-2351 M | [2] | BOLT (M10X1.5X80-MM) | |
| 14. | 344-5675 M | [2] | NUT (M10X1.5-THD) | |
| 15. | 352-3966 | [1] | CLIP (LADDER) | |
| 16. | 3S-2093 | [1] | STRAP-CABLE | |
| 17. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 18. | 7X-7729 | [8] | WASHER (11X25X3-MM THK) | |
| 19. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 20. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 21. | 9X-2038 | [2] | WASHER (7X19X2-MM THK) | |
| 22. | 347-8647 E | HOSE (59-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00832310103
447-8042: TANK GP-FUEL
For full view, you need register
Parts for your 930K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 148-8410 | [1] | PLUG AS | |
| 2M-9780 | [1] | SEAL-O-RING | ||
| 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | ||
| 2. | 419-6646 | [1] | TANK AS-FUEL | |
| 3. | 433-3061 Y | [1] | SENDER GP-FUEL LEVEL (TANK) | |
| 4. | 164-4180 | [1] | PLUG AS | |
| 7M-8485 | [1] | SEAL-O-RING | ||
| 9S-4181 | [1] | PLUG (1-5/16-12-THD) | ||
| Y | SEPARATE ILLUSTRATION | |||
#M00832310104
272-1889: ALTERNATOR GP-CHARGING
272-1889 ALTERNATOR GP-CHARGING
S/N HEG1-UP
24-VOLT, 150-AMPERE
PART OF 332-3644 ALTERNATOR GP-CHARGING
AN ATTACHMENT
S/N HEG1-UP
24-VOLT, 150-AMPERE
PART OF 332-3644 ALTERNATOR GP-CHARGING
AN ATTACHMENT
For full view, you need register
Parts for your 930K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 478-4968 | [1] | FRAME-DRIVE END | |
| 2. | 478-4950 | [1] | FAN AS | |
| 3. | 478-4970 | [1] | FRAME-REAR | |
| 4. | 478-4971 | [1] | COVER AS-ALTERNATOR | |
| 5. | 185-2647 | [1] | GROMMET | |
| 6. | 478-4955 | [1] | STATOR AS | |
| 7. | 185-2654 | [1] | PLATE | |
| 8. | 478-4958 | [1] | ROTOR AS | |
| 9. | 478-4959 | [1] | COIL AS | |
| 10. | 185-2648 | [1] | REGULATOR AS-VOLTAGE (24-VOLT) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 478-4961 | [1] | KIT-COLLAR (ALTERNATOR) | ||
| (INCLUDES COLLARS) | ||||
| 478-4962 | [1] | KIT-BEARING (ALTERNATOR) | ||
| (INCLUDES BEARINGS) | ||||
| 478-4963 | [1] | KIT-HARDWARE (ALTERNATOR) | ||
| (INCLUDES BOLTS & PLATE) | ||||
| 478-4964 | [1] | KIT-TERMINAL (ALTERNATOR) | ||
| (INCLUDES HOLDER AS,PLATE,INSULATION,PIN,GROMMET & NUT) | ||||
| 478-4967 | [1] | KIT-TERMINAL (ALTERNATOR) | ||
| (INCLUDES INSULATIONS,WASHERS & NUTS) | ||||
#M00832310105
332-3644: ALTERNATOR GP-CHARGING
332-3644 ALTERNATOR GP-CHARGING -24-VOLT, 150-AMPERE
S/N HEG1-UP
PART OF 430-2875, 536-5350 OPTION AR-MACHINE
AN ATTACHMENT
S/N HEG1-UP
PART OF 430-2875, 536-5350 OPTION AR-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your 930K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 272-1889 Y | [1] | ALTERNATOR GP-CHARGING (24-VOLT, 150-AMPERE) | |
| 2. | 350-8742 | [1] | BELT-SERPENTINE (ALTERNATOR) | |
| 3. | 359-5145 | [1] | GUARD-ALTERNATOR | |
| 4. | 364-8305 | [1] | FILTER-FOAM (ALTERNATOR AIR) | |
| 5. | 369-3663 | [1] | PULLEY-ALTERNATOR (8-GROOVE) | |
| 6. | 6V-2313 M | [3] | BOLT (M5X0.8X30-MM) | |
| 7. | 8T-0328 | [3] | WASHER-HARD (5.5X10X1-MM THK) | |
| 8. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4198 M | [4] | BOLT (M10X1.5X100-MM) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00832310106
344-5081: ALTERNATOR GP-CHARGING
344-5081 ALTERNATOR GP-CHARGING
24-VOLT, 115-AMPERE
PART OF 426-3396 ALTERNATOR GP-CHARGING
AN ATTACHMENT
24-VOLT, 115-AMPERE
PART OF 426-3396 ALTERNATOR GP-CHARGING
AN ATTACHMENT
For full view, you need register
Parts for your 930K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#M00832310107
426-3396: ALTERNATOR GP-CHARGING
426-3396 ALTERNATOR GP-CHARGING
AIR CONDITIONER
PART OF 430-2855, 430-2865, 454-0597, 536-5320, 536-5330, 536-5340 OPTION AR-MACHINE
AN ATTACHMENT
AIR CONDITIONER
PART OF 430-2855, 430-2865, 454-0597, 536-5320, 536-5330, 536-5340 OPTION AR-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your 930K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 344-5081 Y | [1] | ALTERNATOR GP-CHARGING (24-VOLT, 115-AMPERE) | |
| 2. | 350-8742 | [1] | BELT-SERPENTINE | |
| 3. | 369-3663 | [1] | PULLEY-ALTERNATOR (8-GROOVE) | |
| 4. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 5. | 8T-4198 M | [4] | BOLT (M10X1.5X100-MM) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00832310108
447-8735: BATTERY & WIRING GP
447-8735 BATTERY & WIRING GP
S/N HEG1-UP
PART OF 525-5972 BATTERY & WIRING GP
AN ATTACHMENT
S/N HEG1-UP
PART OF 525-5972 BATTERY & WIRING GP
AN ATTACHMENT
For full view, you need register
Parts for your 930K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-8320 | [1] | PLATE-INSTRUCTION (BATTERY) | |
| 2. | 5R-4467 | [1] | RECEPTACLE AS | |
| 3. | 7K-1181 | [2] | STRAP-CABLE | |
| 4. | 9H-2082 | [1] | SWITCH AS-DISCONNECT (BATTERY) | |
| 2H-3922 | [1] | LOCKWASHER | ||
| 5L-7200 | [1] | SCREW (8-32X0.375-IN) | ||
| 6F-7045 | [2] | NUT-FULL (3/8-24-THD) | ||
| 8F-3437 | [1] | LEVER-SWITCH | ||
| 8H-5303 | [1] | NUT (3/4-16-THD) | ||
| 9B-7233 | [1] | LOCKWASHER | ||
| 264-3617 | [2] | LOCKWASHER | ||
| 5. | 102-8703 | [5] | PLATE-COVER | |
| 6. | 151-4841 | [1] | BLOCK | |
| 7. | 156-3617 | [10] | CLAMP-HALF | |
| 8. | 333-1402 | [1] | CABLE AS-GROUND | |
| 9G-8909 | [2] | COVER-TERMINAL (BLACK) | ||
| 090-2151 E | CABLE-WELDING (00-GA)(30-CM) | |||
| 216-7790 | [2] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 135-5009 E | TUBE-HEAT SHRINK (32-MM DIA)(10-CM) | |||
| 9. | 333-1404 | [1] | CABLE AS (DISCONNECT SWITCH) | |
| 090-2151 E | CABLE-WELDING (00-GA)(18-CM) | |||
| 276-7278 | [1] | TERMINAL-RING | ||
| 315-0180 | [1] | TERMINAL-RING (00-GA, 3/8-IN SCREW) | ||
| 135-5009 E | TUBE-HEAT SHRINK (32-MM DIA)(8-CM) | |||
| 10. | 333-1407 | [1] | CABLE AS (POSITIVE) | |
| 159-8049 E | CABLE (00-GA, RED)(32-CM) | |||
| 216-7790 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 354-5611 | [1] | TERMINAL-RING | ||
| 135-5009 E | TUBE-HEAT SHRINK (32-MM DIA)(10-CM) | |||
| 11. | 333-1408 | [2] | CABLE AS-BATTERY (INTERCONNECT) | |
| (EACH INCLUDES) | ||||
| 159-8049 E | CABLE (00-GA, RED)(28-CM) | |||
| 7T-9987 | [1] | COVER AS-TERMINAL (RED) | ||
| 7T-9988 | [1] | COVER AS-TERMINAL (BLACK) | ||
| (EACH COVER AS INCLUDES) | ||||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 3S-6050 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 3S-6049 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| (EACH TERMINAL AS-BATTERY INCLUDES) | ||||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 12. | 333-1414 | [1] | CABLE AS-BATTERY (NEGATIVE) | |
| 090-2151 E | CABLE-WELDING (00-GA)(150-CM) | |||
| 7T-9988 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 3S-6050 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 216-7790 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 135-5009 E | TUBE-HEAT SHRINK (32-MM DIA)(5-CM) | |||
| 13. | 356-0677 | [1] | CABLE AS (STARTING MOTOR) | |
| 159-8049 E | CABLE (00-GA, RED)(146-CM) | |||
| 276-1786 | [1] | COVER-TERMINAL (RED) | ||
| 301-0091 | [1] | COVER-TERMINAL (RED) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 315-0180 | [1] | TERMINAL-RING (00-GA, 3/8-IN SCREW) | ||
| 354-5611 | [1] | TERMINAL-RING | ||
| 135-5009 E | TUBE-HEAT SHRINK (32-MM DIA)(10-CM) | |||
| 14. | 360-1844 | [1] | STUD AS | |
| 062-5388 | [1] | LOCKNUT (1-11-1/2-THD) | ||
| 15. | 360-1845 | [1] | FILM-IDENTIFICATION (JUMP START) | |
| 16. | 360-1846 | [1] | JUNCTION BLOCK | |
| 17. | 447-8736 | [1] | CABLE AS | |
| 159-8049 E | CABLE (00-GA, RED)(249-CM) | |||
| 9S-5754 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 7T-4924 | [1] | COVER-TERMINAL (RED) | ||
| 7T-9987 | [1] | COVER AS-TERMINAL (RED) | ||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 9X-9825 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 216-7790 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 276-1786 | [1] | COVER-TERMINAL (RED) | ||
| 3S-6049 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 18. | 447-8737 | [1] | CABLE AS | |
| 159-8050 E | CABLE (00-GA, BLACK)(144-CM) | |||
| 7T-9988 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 3S-6050 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 135-5009 E | TUBE-HEAT SHRINK (32-MM DIA)(5-CM) | |||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 216-7790 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 315-0180 | [1] | TERMINAL-RING (00-GA, 3/8-IN SCREW) | ||
| 19. | [1] | PLATE | ||
| 20. | 096-5969 M | [4] | BOLT-SOCKET HEAD (M5X0.8X25-MM) | |
| 21. | 132-5789 | [2] | CLIP (LADDER) | |
| 22. | 1S-0994 | [3] | CLIP (LOOP) | |
| 23. | 248-9997 M | [3] | NUT-BRASS (M12X1.75-THD) | |
| 24. | 260-6696 | [3] | WASHER-COPPER (14X22X2.4-MM THK) | |
| 25. | 4D-5243 | [1] | LOCKWASHER | |
| 26. | 4P-7581 | [3] | CLIP (LADDER) | |
| 27. | 5C-2874 M | [4] | NUT (M5X0.8-THD) | |
| 28. | 5P-4116 | [5] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 29. | 7P-1695 | [4] | WASHER (10.5X19X3-MM THK) | |
| 30. | 8T-4121 | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 31. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 32. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| 33. | 8T-4197 M | [3] | BOLT (M8X1.25X40-MM) | |
| 34. | 8T-4226 | [1] | WASHER-PLATED (10.5X45X3-MM THK) | |
| 35. | 8T-6912 M | [2] | BOLT (M8X1.25X50-MM) | |
| 36. | 9D-3769 | [1] | GROMMET | |
| 37. | 9M-8406 | [2] | CLIP (LOOP) | |
| 38. | 9X-1046 M | [4] | SCREW (M4X0.7X18-MM) | |
| 39. | 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | |
| 40. | 8T-3425 D | CHANNEL-TRIM (0.2-M) | ||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#M00832310109
525-5972: BATTERY & WIRING GP
For full view, you need register
Parts for your 930K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 332-3649 Y | [1] | HEATER GP-JACKET WATER (120-VOLT, 1000-WATT) | ||
| 333-1399 Y | [1] | BATTERY GP (HEAVY-DUTY) | ||
| 347-8057 Y | [1] | BOX GP-BATTERY | ||
| 415-4689 Y | [1] | STARTING AID GP-ETHER | ||
| 430-2885 Y | [1] | LINES GP-HYDROSTATIC (COOLER) | ||
| 447-8735 Y | [1] | BATTERY & WIRING GP | ||
| Y | SEPARATE ILLUSTRATION | |||
Information:
FUEL SYSTEM
PUMP GP-FUEL INJECTION
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Systems Operation
Fuel Injection - Engines with a Primary and Secondary Fuel Filter Base
C7.1 Engines for Caterpillar Built Machines
C7.1 Engines for Caterpillar Built Machines
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Fuel Injection Pump - Install - With Boost Control
C7.1 (Mech) Engines for Caterpillar Built Machines
C7.1 (Mech) Engines for Caterpillar Built Machines
Fuel Injection Pump - Remove - With Boost Control
C7.1 (Mech) Engines for Caterpillar Built Machines
C7.1 (Mech) Engines for Caterpillar Built Machines
Fuel Injection Pump - Install - With Electronic Governor
C7.1 (Mech) Engines for Caterpillar Built Machines
C7.1 (Mech) Engines for Caterpillar Built Machines
Fuel Injection Pump - Remove - With Electronic Governor
C7.1 (Mech) Engines for Caterpillar Built Machines
C7.1 (Mech) Engines for Caterpillar Built Machines
