WORK TOOLS
BUCKET GPWORK TOOLS
BUCKET GP
#M00847650450
516-0484: BOWL AS-BUCKET
516-0484 BOWL AS-BUCKET
S/N JNR1-UP
PART OF 516-0474, 516-0498 BUCKET GP-MULTIPURPOSE
AN ATTACHMENT
S/N JNR1-UP
PART OF 516-0474, 516-0498 BUCKET GP-MULTIPURPOSE
AN ATTACHMENT
For full view, you need register
Parts for your 953K TRACK LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5G-8267 | [1] | EDGE-CUTTING | |
| 2. | 5G-8269 | [2] | BIT-END | |
| 3. | 8P-9770 | [1] | PLATE | |
| 4. | 8V-9350 | [1] | FLOOR AS | |
| 9V-3373 | [5] | BAR | ||
| 5. | 9V-6572 | [1] | EDGE-CUTTING | |
| 6. | 516-0485 | [1] | PLATE AS-SIDE (RH) | |
| 6A. | 5P-0063 | [1] | PLUG-CUP | |
| 6B. | 8E-5302 | [1] | CORNER (RH) | |
| 7. | 516-0488 | [1] | PLATE AS-SIDE (LH) | |
| 7A. | 5P-0063 | [1] | PLUG-CUP | |
| 7B. | 8E-5303 | [1] | CORNER (LH) | |
| 6V-3607 AF | [1] | FILM-NOTICE (BUCKET CORNER GUARD SYSTEM) | ||
| A | NOT PART OF THIS GROUP | |||
| F | NOT SHOWN | |||
#M00847650451
357-7628: BUCKET AR-GENERAL PURPOSE
357-7628 BUCKET AR-GENERAL PURPOSE
S/N JNR1-UP
FOR USE WITH WASTE HANDLING APPLICATIONS
AN ATTACHMENT
S/N JNR1-UP
FOR USE WITH WASTE HANDLING APPLICATIONS
AN ATTACHMENT
For full view, you need register
#M00847650452
508-3230: BUCKET AR-LIGHT MATERIAL
For full view, you need register
Parts for your 953K TRACK LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | Y | [1] | BUCKET AS-LIGHT MATERIAL | |
| 2. | Y | [1] | EDGE GP-SEGMENT | |
| 3. | Y | [1] | TOOTH GP-LONG | |
| Y | SEPARATE ILLUSTRATION | |||
#M00847650453
514-1415: BUCKET AR-MULTIPURPOSE
For full view, you need register
Parts for your 953K TRACK LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 514-1496 Y | [1] | BUCKET GP-MULTIPURPOSE | ||
| Y | [1] | GUARD GP-FRONT | ||
| Y | SEPARATE ILLUSTRATION | |||
#M00847650454
514-1416: BUCKET AR-MULTIPURPOSE
For full view, you need register
Parts for your 953K TRACK LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 514-1497 Y | [1] | BUCKET AR-MULTIPURPOSE | ||
| Y | [1] | GUARD GP-FRONT | ||
| Y | SEPARATE ILLUSTRATION | |||
#M00847650455
514-1497: BUCKET AR-MULTIPURPOSE
514-1497 BUCKET AR-MULTIPURPOSE
S/N JNR1-UP
WASTE HANDLING
PART OF 514-1416 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
S/N JNR1-UP
WASTE HANDLING
PART OF 514-1416 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
For full view, you need register
Parts for your 953K TRACK LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 516-0498 CY | [1] | BUCKET GP-MULTIPURPOSE | |
| 2. | 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 3. | 8V-7370 Y | [1] | MOUNTING GP-CYLINDER | |
| 4. | 257-1747 Y | [1] | TOOTH GP-LONG | |
| 5. | 264-8894 Y | [1] | EDGE GP-CUTTING | |
| 6. | 292-9044 Y | [2] | CYLINDER GP-BUCKET | |
| 7. | 475-1579 | [1] | PLATE-INFORMATION (BUCKET) | |
| 8. | Y | [1] | LINES GP-BUCKET | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00847650456
258-6897: BUCKET AS-GENERAL PURPOSE
258-6897 BUCKET AS-GENERAL PURPOSE
S/N JNR1-UP
1.72-CU M (2.25-CU YD) HEAPED CAPACITY BARE BUCKET
PART OF 455-1620 BUCKET GP-GENERAL PURPOSE, 357-7624, 357-7625 OPTION AR-WORK TOOL
FOR USE WITH BOLT-ON CUTTING EDGE AND SET OF EIGHT BOLT-ON TEETH
AN ATTACHMENT
S/N JNR1-UP
1.72-CU M (2.25-CU YD) HEAPED CAPACITY BARE BUCKET
PART OF 455-1620 BUCKET GP-GENERAL PURPOSE, 357-7624, 357-7625 OPTION AR-WORK TOOL
FOR USE WITH BOLT-ON CUTTING EDGE AND SET OF EIGHT BOLT-ON TEETH
AN ATTACHMENT
For full view, you need register
Parts for your 953K TRACK LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 264-8012 C | [1] | HINGE AS (LH) | |
| 2. | 8Y-3840 | [1] | HINGE AS (INNER, LH) | |
| 3. | 8Y-3841 | [1] | HINGE AS (INNER, RH) | |
| 4. | 264-8013 C | [1] | HINGE AS (RH) | |
| 5. | 8Y-3843 | [1] | HINGE AS (CENTER, LH) | |
| 6. | 264-8014 C | [1] | HINGE AS (RH) | |
| 7. | 8Y-5252 | [1] | PLATE AS | |
| 7A. | 8Y-3851 | [1] | BAR | |
| 7B. | 8Y-3852 | [2] | BAR | |
| 7C. | 8Y-9102 | [4] | PLATE | |
| 8. | 9V-6572 | [1] | EDGE-CUTTING | |
| 9. | 258-6898 | [1] | PLATE AS (LH) | |
| 9A. | 8E-5303 | [1] | CORNER (LH) | |
| 9B. | 8Y-9091 | [1] | BAR (LH) | |
| 10. | 258-6899 | [1] | PLATE AS (RH) | |
| 10A. | 8E-5302 | [1] | CORNER (RH) | |
| 10B. | 8Y-9093 | [1] | BAR (RH) | |
| 11. | 6V-3607 | [1] | FILM-NOTICE (BUCKET CORNER GUARD SYSTEM) | |
| 12. | 184-6391 C | [2] | PLATE | |
| 13. | 8Y-3858 C | [6] | PLATE | |
| 14. | 300-3445 C | [1] | PLATE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#M00847650457
258-6900: BUCKET AS-GENERAL PURPOSE
258-6900 BUCKET AS-GENERAL PURPOSE
S/N JNR1-UP
1.72-CU M (2.25-CU YD) HEAPED CAPACITY BARE BUCKET
PART OF 357-7626 OPTION AR-WORK TOOL
FOR USE WITH SET OF EIGHT TIPS
AN ATTACHMENT
S/N JNR1-UP
1.72-CU M (2.25-CU YD) HEAPED CAPACITY BARE BUCKET
PART OF 357-7626 OPTION AR-WORK TOOL
FOR USE WITH SET OF EIGHT TIPS
AN ATTACHMENT
For full view, you need register
Parts for your 953K TRACK LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 264-8012 | [1] | HINGE AS (LH) | |
| 2. | 8Y-3840 | [1] | HINGE AS (INNER, LH) | |
| 3. | 8Y-3841 | [1] | HINGE AS (INNER, RH) | |
| 4. | 264-8013 | [1] | HINGE AS (RH) | |
| 5. | 8Y-3843 | [1] | HINGE AS (CENTER, LH) | |
| 6. | 264-8014 | [1] | HINGE AS (RH) | |
| 7. | 8Y-3858 | [6] | PLATE | |
| 8. | 8Y-4891 | [1] | PLATE AS (LH) | |
| 4V-8668 | [1] | CORNER (LH) | ||
| 8Y-9091 | [1] | BAR (LH) | ||
| 9. | 8Y-4892 | [1] | PLATE AS (RH) | |
| 4V-8667 | [1] | CORNER (RH) | ||
| 8Y-9093 | [1] | BAR (RH) | ||
| 10. | 8Y-5252 | [1] | PLATE AS | |
| 8Y-9102 | [4] | PLATE | ||
| 8Y-3851 | [1] | BAR | ||
| 8Y-3852 | [2] | BAR | ||
| 11. | 184-6391 | [2] | PLATE | |
| 12. | 258-6901 | [1] | EDGE AS-CUTTING | |
| 1V-3916 | [1] | EDGE-CUTTING | ||
| 229-7084 | [8] | ADAPTER-TIP (K-80, FLUSH MOUNT) | ||
| 13. | 300-3445 | [1] | PLATE |
#M00847650458
264-0377: BUCKET AS-GENERAL PURPOSE
264-0377 BUCKET AS-GENERAL PURPOSE
S/N JNR1-UP
1.72-CU M (2.25-CU YD) HEAPED CAPACITY BARE BUCKET
PART OF 264-0378 BUCKET AS-GENERAL PURPOSE
FOR USE WITH SET OF EIGHT TIPS
AN ATTACHMENT
S/N JNR1-UP
1.72-CU M (2.25-CU YD) HEAPED CAPACITY BARE BUCKET
PART OF 264-0378 BUCKET AS-GENERAL PURPOSE
FOR USE WITH SET OF EIGHT TIPS
AN ATTACHMENT
For full view, you need register
Parts for your 953K TRACK LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-3840 | [1] | HINGE AS (INNER, LH) | |
| 2. | 8Y-3841 | [1] | HINGE AS (INNER, RH) | |
| 3. | 8Y-3843 | [1] | HINGE AS (CENTER, LH) | |
| 4. | 8Y-5252 | [1] | PLATE AS | |
| 8Y-9102 | [4] | PLATE | ||
| 8Y-3851 | [1] | BAR | ||
| 8Y-3852 | [2] | BAR | ||
| 5. | 9V-6572 | [1] | EDGE-CUTTING | |
| 6. | 258-6898 | [1] | PLATE AS (LH) | |
| 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) | ||
| 8E-5303 | [1] | CORNER (LH) | ||
| 8Y-9091 | [1] | BAR (LH) | ||
| 7. | 258-6899 | [1] | PLATE AS (RH) | |
| 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) | ||
| 8E-5302 | [1] | CORNER (RH) | ||
| 8Y-9093 | [1] | BAR (RH) | ||
| 8. | 264-8012 | [1] | HINGE AS (LH) | |
| 9. | 264-8013 | [1] | HINGE AS (RH) | |
| 10. | 264-8014 | [1] | HINGE AS (RH) |
#M00847650459
264-0378: BUCKET AS-GENERAL PURPOSE
264-0378 BUCKET AS-GENERAL PURPOSE
S/N JNR1-UP
PART OF 264-0379 BUCKET GP-GENERAL PURPOSE
AN ATTACHMENT
S/N JNR1-UP
PART OF 264-0379 BUCKET GP-GENERAL PURPOSE
AN ATTACHMENT
For full view, you need register
Parts for your 953K TRACK LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 264-0377 Y | [1] | BUCKET AS-GENERAL PURPOSE | |
| Y | SEPARATE ILLUSTRATION | |||
