530-1945 HARNESS AS-CONSOLE S/N KTN1-UP SECOND CONTROL MODULE PART OF 488-6767 WIRING GP-CONSOLE 320 GC

Part No	Qty	Parts name
163-6659	[1]	CONNECTOR-PLUG (12-PIN)
490-6690	[1]	CONNECTOR-PLUG
487-8430	[2]	PLUG AS-CONNECTOR
369-3774	[8]	SEAL-CONNECTOR
3S-2093	[3]	STRAP-CABLE
125-4785	[10]	TERMINAL (FEMALE)
153-2631	[4]	TERMINAL (14-GA TO 20-GA)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
E		ORDER BY THE CENTIMETER

#M00852370301

543-2649: HARNESS AS-CONSOLE

HARNESS AS-CONSOLE

543-2649 HARNESS AS-CONSOLE -RH
S/N KTN1-UP
PART OF 488-6766 WIRING GP-CONSOLE

i07380222 M0085237

For full view, you need register

Parts for your 320 GC EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
342-2972	[2]	CAP-CONNECTOR (2-PIN)
342-2973	[1]	CAP-CONNECTOR (3-PIN)
342-2978	[1]	CAP-CONNECTOR (4-PIN)
484-1452	[1]	CLIP
484-1454	[4]	CLIP-RETAINING
163-6659	[2]	CONNECTOR-PLUG (12-PIN)
163-6699	[2]	CONNECTOR-PLUG (18-PIN)
155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
		(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
102-8801	[1]	KIT-RECEPTACLE (12-PIN)
102-8805	[1]	KIT-RECEPTACLE (6-PIN)
		(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
8T-8729	[15]	PIN-CONNECTOR (16-GA TO 18-GA)
240-7874	[1]	PLUG AS-CONNECTOR (2-PIN)
240-7876	[1]	PLUG AS-CONNECTOR (2-PIN)
		(EACH PLUG AS INCLUDES)
455-0704	[1]	SEAL-CONNECTOR
240-7878	[1]	PLUG AS-CONNECTOR (3-PIN)
455-0705	[1]	SEAL-CONNECTOR
261-0524	[1]	PLUG AS-CONNECTOR (4-PIN)
455-0706	[1]	SEAL-CONNECTOR
281-3132	[1]	PLUG AS-CONNECTOR (6-PIN)
455-0707	[1]	SEAL-CONNECTOR
7Y-3952	[1]	PLUG-CONNECTOR (2-PIN)
8T-8737	[7]	PLUG-SEAL
8T-8730	[17]	SOCKET-CONNECTOR (16-GA TO 18-GA)
9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
3S-2093	[19]	STRAP-CABLE
204-2281	[1]	STRAP-CABLE
125-4785	[89]	TERMINAL (FEMALE)
170-6827	[28]	TERMINAL (MALE)
7Y-3951	[2]	TERMINAL-BLADE (14-GA)
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(5-CM)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(50-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)
3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
E		ORDER BY THE CENTIMETER

#M00852370302

547-9984: HARNESS AS-CONSOLE

HARNESS AS-CONSOLE

547-9984 HARNESS AS-CONSOLE -LH
S/N KTN1-UP
PART OF 488-6765 WIRING GP-CONSOLE

i07410224 M0085237

For full view, you need register

Parts for your 320 GC EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
102-8802	[1]	KIT-RECEPTACLE (2-PIN)
102-8805	[1]	KIT-RECEPTACLE (6-PIN)
102-8806	[1]	KIT-RECEPTACLE (8-PIN)
102-8801	[1]	KIT-RECEPTACLE (12-PIN)
		(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
8T-8729	[17]	PIN-CONNECTOR (16-GA TO 18-GA)
8T-8730	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
3S-2093	[8]	STRAP-CABLE
8T-8737	[16]	PLUG-SEAL
125-4785	[18]	TERMINAL (FEMALE)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)
153-2631	[14]	TERMINAL (14-GA TO 20-GA)
155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
163-6699	[1]	CONNECTOR-PLUG (18-PIN)
170-6827	[13]	TERMINAL (MALE)
204-2281	[1]	STRAP-CABLE
281-3132	[1]	PLUG AS-CONNECTOR (6-PIN)
455-0707	[1]	SEAL-CONNECTOR
484-1452	[1]	CLIP
484-1453	[1]	CLIP (RETAINER)
484-1454	[2]	CLIP-RETAINING
490-6690	[3]	CONNECTOR-PLUG
E		ORDER BY THE CENTIMETER

#M00852370303

529-0428: HARNESS AS-CONTROL

HARNESS AS-CONTROL

529-0428 HARNESS AS-CONTROL -GRADE CONTROL
S/N KTN1-UP
PART OF 516-8663 WIRING GP-FRONT

i07118126 M0085237

For full view, you need register

Parts for your 320 GC EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
283-0056	[2]	ADAPTER-CONNECTOR
174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGES, & INTERFACE SEAL)
176-2947	[1]	KIT-CONNECTING PLUG (4-PIN)
155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
151-9274	[1]	KIT-RECEPTACLE (4-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
3E-3390	[6]	PIN-CONNECTOR
230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
455-0705	[1]	SEAL-CONNECTOR
230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
455-0707	[1]	SEAL-CONNECTOR
8T-8737	[9]	PLUG-SEAL
243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
8T-8730	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
9W-0844	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
E		ORDER BY THE CENTIMETER

#M00852370304

529-8754: HARNESS AS-CONTROL

HARNESS AS-CONTROL

529-8754 HARNESS AS-CONTROL -FAN
S/N KTN1-UP
PART OF 502-7160 WIRING GP-FAN

i07115205 M0085237

For full view, you need register

Parts for your 320 GC EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
342-2974	[1]	CAP-CONNECTOR (6-PIN)
484-1452	[9]	CLIP
484-1454	[2]	CLIP-RETAINING
155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
		(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
		(EACH INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
177-9648	[5]	KIT-CONNECTING PLUG (2-PIN)
		(EACH INCLUDES PLUG AS & WEDGE)
102-8802	[1]	KIT-RECEPTACLE (2-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
8T-8729	[10]	PIN-CONNECTOR (16-GA TO 18-GA)
281-8811	[1]	PLUG AS-CONNECTOR (6-PIN)
455-0707	[1]	SEAL-CONNECTOR
8T-8737	[11]	PLUG-SEAL
243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
8T-8730	[16]	SOCKET-CONNECTOR (16-GA TO 18-GA)
7T-0094	[10]	SOCKET-CONNECTOR (12-GA TO 14-GA)
3S-2093	[6]	STRAP-CABLE
204-2281	[9]	STRAP-CABLE
311-6185	[1]	TERMINAL AS
125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)
311-6184	[1]	TERMINAL-RING (2-GA, 3/8-IN SCREW)
6T-5598	[1]	TERMINAL-RING (1-GA TO 2-GA, 5/16-IN SCREW)
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(26-CM)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(13-CM)
E		ORDER BY THE CENTIMETER

#M00852370305

536-5436: HARNESS AS-CONTROL

HARNESS AS-CONTROL

536-5436 HARNESS AS-CONTROL -GRADE CONTROL
S/N KTN1-UP
PART OF 516-8663 WIRING GP-FRONT

i07118130 M0085237

For full view, you need register

Parts for your 320 GC EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
342-2974	[1]	CAP-CONNECTOR (6-PIN)
262-8088 E		HOSE (126-CM)
8T-8729	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
455-0709	[1]	SEAL-CONNECTOR
230-5010	[2]	PLUG AS-CONNECTOR (6-PIN)
		(EACH INCLUDES)
455-0707	[1]	SEAL-CONNECTOR
8T-8737	[14]	PLUG-SEAL
230-5011	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
8T-8730	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
E		ORDER BY THE CENTIMETER

#M00852370306

552-4919: HARNESS AS-CONTROL

HARNESS AS-CONTROL

552-4919 HARNESS AS-CONTROL
S/N KTN10001-UP
PL631/PL641
PART OF 506-7031 WIRING GP-CHASSIS

i07329152 M0085237

For full view, you need register

Parts for your 320 GC EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
484-1454	[1]	CLIP-RETAINING
123-7615	[1]	CONNECTOR (1-PIN)
331-4222	[1]	KIT-CONNECTING PLUG (12-PIN)
		(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
8T-8729	[11]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[11]	PIN-CONNECTOR (14-GA TO 16-GA)
8T-8737	[4]	PLUG-SEAL
335-8849	[1]	RECEPTACLE AS
325-9571	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
8T-8730	[9]	SOCKET-CONNECTOR (16-GA TO 18-GA)
155-2258	[1]	WEDGE-PLUG LOCK (12-PIN)

#M00852370307

529-8749: HARNESS AS-ENGINE

HARNESS AS-ENGINE

529-8749 HARNESS AS-ENGINE -REAR
S/N KTN1-512
PART OF 502-7162 WIRING GP-ENGINE

i07097185 M0085237

For full view, you need register

Parts for your 320 GC EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
484-1452	[3]	CLIP
230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
239-7356	[1]	PLUG AS-CONNECTOR (12-PIN)
241-8834	[1]	PLUG AS-CONNECTOR (12-PIN)
		(EACH PLUG AS INCLUDES)
455-0709	[1]	SEAL-CONNECTOR
230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
455-0704	[1]	SEAL-CONNECTOR
374-8331	[1]	PLUG AS-CONNECTOR (86-PIN)
435-5221	[1]	KIT-BOLT (CONNECTOR)
435-5222	[1]	SEAL
8T-8737	[4]	PLUG-SEAL
169-0705	[48]	SEAL
8T-8730	[32]	SOCKET-CONNECTOR (16-GA TO 18-GA)
7T-0094	[6]	SOCKET-CONNECTOR (12-GA TO 14-GA)
9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
394-9569	[32]	SOCKET-CONNECTOR (16-GA TO 18-GA)
3S-2093	[5]	STRAP-CABLE
204-2281	[3]	STRAP-CABLE
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
E		ORDER BY THE CENTIMETER

#M00852370308

530-2660: HARNESS AS-ENGINE

HARNESS AS-ENGINE

530-2660 HARNESS AS-ENGINE -FRONT
S/N KTN1-UP
PART OF 502-7162 WIRING GP-ENGINE

i07092917 M0085237

For full view, you need register

Parts for your 320 GC EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
484-1452	[2]	CLIP
230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
		(EACH INCLUDES)
455-0704	[1]	SEAL-CONNECTOR
230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
455-0706	[1]	SEAL-CONNECTOR
8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
204-2281	[2]	STRAP-CABLE

#M00852370309

550-5475: HARNESS AS-ENGINE

HARNESS AS-ENGINE

550-5475 HARNESS AS-ENGINE -REAR
S/N KTN513-UP
PART OF 502-7162 WIRING GP-ENGINE

i07602385 M0085237

For full view, you need register

Parts for your 320 GC EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
484-1452	[3]	CLIP
239-7356	[1]	PLUG AS-CONNECTOR (12-PIN)
241-8834	[1]	PLUG AS-CONNECTOR (12-PIN)
230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
		(EACH PLUG AS INCLUDES)
455-0709	[1]	SEAL-CONNECTOR
230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
455-0704	[1]	SEAL-CONNECTOR
374-8331	[1]	PLUG AS-CONNECTOR (86-PIN)
435-5221	[1]	KIT-BOLT (CONNECTOR)
		(INCLUDES BOLT, NUT, SEALS & WASHERS)
435-5222	[1]	SEAL
8T-8737	[3]	PLUG-SEAL
169-0705	[47]	SEAL
8T-8730	[33]	SOCKET-CONNECTOR (16-GA TO 18-GA)
7T-0094	[6]	SOCKET-CONNECTOR (12-GA TO 14-GA)
9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
394-9569	[33]	SOCKET-CONNECTOR (16-GA TO 18-GA)
3S-2093	[5]	STRAP-CABLE
204-2281	[3]	STRAP-CABLE
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
E		ORDER BY THE CENTIMETER

Information:

ELECTRICAL AND STARTING SYSTEM

HARNESS GP

Special Instruction

Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat® Products Equipped with BR Series Connectors {1408}
Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat^® Products Equipped with BR Series Connectors {1408}

Installation of the 490-2713 Chassis Wiring Gp on Certain Hydraulic Excavators {1408}
Installation of the 490-2713 Chassis Wiring Gp on Certain Hydraulic Excavators {1408}

BR Series Connector Training Harness Assembly Procedure {1408}
BR Series Connector Training Harness Assembly Procedure {1408}

Procedure to Install Fine Grading on Certain 320, 320 GC, and 323 Next Generation Excavators {1408, 5479}
Procedure to Install Fine Grading on Certain 320, 320 GC, and 323 Next Generation Excavators {1408, 5479}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Service Letter-NACD

PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CHASSIS HARNESS ASSEMBLY ON CERTAIN 320, 320GC, AND 323 NGH EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CHASSIS HARNESS ASSEMBLY ON CERTAIN 320, 320GC, AND 323 NGH EXCAVATORS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

Service Magazine

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

A Guideline for Electrical Checks for the Engine Harness is Now Available for Certain Excavators {1408}
A Guideline for Electrical Checks for the Engine Harness is Now Available for Certain Excavators {1408}

Caterpillar Parts SIS Catalog 320 GC :

530-1944 HARNESS AS-CONSOLE

530-1943 HARNESS AS-CONSOLE

558-1498 HARNESS AS-CHASSIS

558-1495 HARNESS AS-CHASSIS

551-0330 HARNESS AS-CHASSIS

529-8762 HARNESS AS-CHASSIS

529-8096 HARNESS AS-CHASSIS

524-1450 HARNESS AS-CHASSIS

543-2649 HARNESS AS-CONSOLE

547-9984 HARNESS AS-CONSOLE

529-0428 HARNESS AS-CONTROL

529-8754 HARNESS AS-CONTROL

536-5436 HARNESS AS-CONTROL

552-4919 HARNESS AS-CONTROL

529-8749 HARNESS AS-ENGINE

530-2660 HARNESS AS-ENGINE