HYDRAULIC SYSTEM
CYLINDER GPDRIVE GP
HYDRAULIC SYSTEM
CYLINDER GP#M00852370650
490-4140: CYLINDER & SEAL GP-STICK
490-4140 CYLINDER & SEAL GP-STICK
S/N KTN1-UP
135-MM (5.3-IN) BORE X 1504-MM (59.2-IN) STROKE
PART OF 490-4139, 515-8974 CYLINDER & LINES GP-STICK
S/N KTN1-UP
135-MM (5.3-IN) BORE X 1504-MM (59.2-IN) STROKE
PART OF 490-4139, 515-8974 CYLINDER & LINES GP-STICK
Parts for your 320 GC EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 495-1185 | [1] | CYLINDER AS-STICK | |
1A. | 357-5711 | [2] | BUSHING | |
2. | 495-1186 | [1] | ROD AS | |
2A. | 240-2914 | [1] | BUSHING | |
3. | 519-7600 | [1] | HEAD | |
4. | 095-1720 J | [1] | SEAL-O-RING | |
5. | 234-4581 J | [1] | RING-BACKUP | |
6. | 096-4430 | [1] | BUSHING | |
7. | 7Y-4631 | [1] | RING-RETAINING | |
8. | 350-0954 J | [1] | SEAL-BUFFER | |
9. | 350-0959 J | [1] | SEAL-U-CUP | |
10. | 150-5827 J | [1] | RING-BACKUP | |
11. | 456-0194 J | [1] | SEAL-LIP TYPE | |
12. | 526-4241 J | [1] | RING-SEAL | |
13. | 526-4239 | [1] | STOP | |
14. | 234-4582 | [1] | PISTON | |
15. | 234-4586 J | [2] | RING | |
16. | 234-4585 J | [2] | RING | |
17. | 234-4583 J | [1] | SEAL AS | |
18. | 234-4584 J | [2] | RING-BACKUP | |
19. | 4B-9880 | [1] | BALL | |
20. | 096-6210 M | [1] | SETSCREW-SOCKET (M14X2X14-MM) | |
21. | 096-4461 | [1] | RING-RETAINING | |
22. | 526-4240 J | [1] | RING-SEAL | |
23. | 6I-6971 | [2] | RING-RETAINING | |
24. | 526-4238 | [1] | STOP | |
25. | 4I-3628 M | [12] | BOLT-SOCKET HEAD (M18X2.5X80-MM) | |
26. | 166-1494 | [4] | SEAL-LIP TYPE | |
27. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
AVAILABLE REPAIR KIT(S): | ||||
519-7601 J | [1] | KIT-SEAL | ||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
M | METRIC PART |
#M00852370651
490-4144: CYLINDER & SEAL GP-STICK
490-4144 CYLINDER & SEAL GP-STICK
S/N KTN1-UP
140-MM (5.5-IN) BORE X 1504-MM (59.2-IN) STROKE
PART OF 515-8973 CYLINDER & LINES GP-STICK
S/N KTN1-UP
140-MM (5.5-IN) BORE X 1504-MM (59.2-IN) STROKE
PART OF 515-8973 CYLINDER & LINES GP-STICK
Parts for your 320 GC EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 526-8033 | [1] | CYLINDER AS-STICK | |
1A. | 357-5711 | [2] | BUSHING | |
2. | 495-1188 | [1] | ROD AS | |
2A. | 240-2914 | [1] | BUSHING | |
3. | 522-1194 | [1] | HEAD | |
4. | 095-1721 J | [1] | SEAL-O-RING | |
5. | 4I-3627 J | [1] | RING-BACKUP | |
6. | 096-5625 | [1] | BUSHING | |
7. | 094-1931 | [1] | RING-RETAINING | |
8. | 350-0955 J | [1] | SEAL-BUFFER | |
9. | 350-0960 J | [1] | SEAL-U-CUP | |
10. | 121-1372 J | [1] | RING-BACKUP | |
11. | 456-0195 J | [1] | SEAL-LIP TYPE | |
12. | 526-1961 J | [1] | RING-SEAL | |
13. | 526-1957 | [1] | STOP | |
14. | 247-8873 | [1] | PISTON | |
15. | 096-1571 J | [2] | RING | |
16. | 247-8874 J | [2] | RING | |
17. | 096-1570 J | [1] | SEAL AS | |
18. | 4I-3631 J | [2] | RING-BACKUP | |
19. | 4B-9880 | [1] | BALL | |
20. | 096-6210 M | [1] | SETSCREW-SOCKET (M14X2X14-MM) | |
21. | 085-8605 | [1] | RING-RETAINING | |
22. | 526-1960 J | [1] | RING-SEAL | |
23. | 085-8604 | [2] | RING-RETAINING | |
24. | 526-1956 | [1] | STOP | |
25. | 4I-3628 M | [12] | BOLT-SOCKET HEAD (M18X2.5X80-MM) | |
26. | 166-1494 | [4] | SEAL-LIP TYPE | |
27. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
AVAILABLE REPAIR KIT(S): | ||||
526-1958 J | [1] | KIT-SEAL | ||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
M | METRIC PART |
#M00852370652
494-4985: CYLINDER AR-BOOM
494-4985 CYLINDER AR-BOOM
S/N KTN1-UP
PART OF 520-9452, 520-9453, 520-9455, 520-9456, 527-0904, 528-5892, 532-9502, 538-5215, 542-2008, 544-4531, 550-5523, 550-5529, 555-2150, 556-1519, 556-1520, 556-2847, 556-2848, 556-2849, 556-2850, 556-2885, 556-2887, 560-3203, 560-3204, 560-3205, 560-3206, 560-3213, 560-3215, 560-3217, 560-3218, 560-3255, 560-3261, 560-3272, 560-3278, 562-4203, 565-3832, 565-3835, 565-3837, 565-3839, 565-3863, 565-3865, 570-8938, 570-8939, 570-8940, 570-8941, 570-8944, 571-1657, 571-1659, 571-1661, 576-8569, 576-8570, 576-8571, 576-8572, 576-8605, 576-8607 DISTRIBUTION AR
S/N KTN1-UP
PART OF 520-9452, 520-9453, 520-9455, 520-9456, 527-0904, 528-5892, 532-9502, 538-5215, 542-2008, 544-4531, 550-5523, 550-5529, 555-2150, 556-1519, 556-1520, 556-2847, 556-2848, 556-2849, 556-2850, 556-2885, 556-2887, 560-3203, 560-3204, 560-3205, 560-3206, 560-3213, 560-3215, 560-3217, 560-3218, 560-3255, 560-3261, 560-3272, 560-3278, 562-4203, 565-3832, 565-3835, 565-3837, 565-3839, 565-3863, 565-3865, 570-8938, 570-8939, 570-8940, 570-8941, 570-8944, 571-1657, 571-1659, 571-1661, 576-8569, 576-8570, 576-8571, 576-8572, 576-8605, 576-8607 DISTRIBUTION AR
Parts for your 320 GC EXCAVATOR:
CATERPILLAR SIS#M00852370653
169-0329: CYLINDER GP-COUPLER
169-0329 CYLINDER GP-COUPLER
S/N KTN1-UP
60-MM (2.4-IN) BORE X 110-MM (4.3-IN) STROKE
PART OF 169-0701 LOCK GP-QUICK COUPLER
S/N KTN1-UP
60-MM (2.4-IN) BORE X 110-MM (4.3-IN) STROKE
PART OF 169-0701 LOCK GP-QUICK COUPLER
Parts for your 320 GC EXCAVATOR:
CATERPILLAR SIS#M00852370654
488-3074: DRIVE & MTG GP-SWING
488-3074 DRIVE & MTG GP-SWING
S/N KTN1-UP
PART OF 576-8569, 576-8570, 576-8571, 576-8572, 576-8573, 576-8574, 576-8605, 576-8606, 576-8607, 576-8608, 576-8609 DISTRIBUTION AR, 490-7662 EXCAVATOR AR
S/N KTN1-UP
PART OF 576-8569, 576-8570, 576-8571, 576-8572, 576-8573, 576-8574, 576-8605, 576-8606, 576-8607, 576-8608, 576-8609 DISTRIBUTION AR, 490-7662 EXCAVATOR AR
Parts for your 320 GC EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2Y-5503 | [2] | CORK | |
2. | 201-7949 M | [12] | BOLT (M24X3X70-MM) | |
3. | 488-3075 Y | [1] | DRIVE GP-SWING | |
4. | 096-4755 | [1] | PIN | |
5. | 5D-1026 | [1] | CLAMP-BAND | |
6. | 6V-8237 | [12] | WASHER (26X44X4-MM THK) | |
7. | 5P-0767 E | HOSE (90-CM) | ||
E | ORDER BY THE CENTIMETER | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#M00852370655
560-2473: DRIVE & MTG GP-SWING
560-2473 DRIVE & MTG GP-SWING
S/N KTN1-UP
S/N KTN1-UP
Parts for your 320 GC EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2Y-5503 | [2] | CORK | |
2. | 201-7949 M | [12] | BOLT (M24X3X70-MM) | |
3. | 560-2474 Y | [1] | DRIVE GP-SWING | |
4. | 096-4755 | [1] | PIN | |
5. | 352-7064 | [2] | CAP | |
6. | 6V-8237 | [12] | WASHER (26X44X4-MM THK) | |
7. | 5D-1026 | [1] | CLAMP-BAND | |
8. | 5P-0767 E | HOSE (90-CM) | ||
1U-8846 BF | SEALANT-GASKET | |||
B | USE AS REQUIRED | |||
E | ORDER BY THE CENTIMETER | |||
F | NOT SHOWN | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#M00852370656
378-9517: DRIVE GP-SWING
Parts for your 320 GC EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 6V-7238 | [1] | VALVE-SHUTOFF | |
2. | 094-0611 | [6] | WASHER (47.3X76X1-MM THK) | |
3. | 148-4636 | [1] | SHAFT-PINION | |
4. | 148-4640 | [1] | RING-RETAINING | |
5. | 171-9383 | [1] | SPACER | |
6. | 199-4561 | [2] | SEAL-LIP TYPE | |
7. | 227-6228 | [1] | CAGE | |
8. | 367-8364 | [1] | GEAR-SUN (20-TEETH) | |
9. | 367-8365 | [3] | GEAR-PLANETARY (26-TEETH) | |
10. | 367-8367 | [2] | RING-RETAINING | |
11. | 367-8368 | [1] | GEAR-SUN (23-TEETH) | |
12. | 367-8369 | [3] | GEAR-PLANETARY (25-TEETH) | |
13. | 378-9513 | [3] | SHAFT | |
14. | 378-9514 | [1] | CARRIER-PLANETARY | |
15. | 378-9515 | [1] | GEAR-RING (73-TEETH) | |
16. | 378-9516 | [1] | HOUSING | |
17. | 378-9609 | [1] | CARRIER AS | |
18. | 451-2182 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
19. | 453-3447 M | [6] | BOLT (M12X1.75X40-MM) | |
20. | 094-0584 | [6] | WASHER (40.3X72X1-MM THK) | |
21. | 509-6676 | [3] | PIN-SPRING | |
22. | 095-1022 | [1] | BEARING-ROLLER | |
23. | 148-4642 | [1] | SEAL-O-RING | |
24. | 148-4643 | [1] | BEARING | |
25. | 296-6268 | [6] | BEARING AS-ROLLER | |
26. | 346-5215 | [3] | BEARING AS | |
27. | 3K-0360 | [1] | SEAL-O-RING | |
28. | 7I-7623 | [1] | SPACER (52X69.5X6-MM THK) | |
29. | 7Y-1434 | [1] | SPACER (40X69.5X6-MM THK) | |
30. | 8T-0348 M | [16] | BOLT-SOCKET HEAD (M16X2X50-MM) | |
31. | 8T-4240 | [3] | RING-RETAINING | |
32. | 9X-8268 | [16] | WASHER (17.5X30X3.5-MM THK) | |
1U-8846 BF | SEALANT-GASKET | |||
B | USE AS REQUIRED | |||
F | NOT SHOWN | |||
M | METRIC PART |
#M00852370657
488-3075: DRIVE GP-SWING
Parts for your 320 GC EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 114-1398 | [1] | GAUGE-OIL LEVEL (SWING DRIVE) | |
2. | 114-1399 | [1] | PIPE-GAUGE | |
3. | 227-6221 | [1] | BREATHER AS (SWING DRIVE) | |
227-6215 | [1] | BOSS (1/4-18-THD) | ||
267-6785 | [1] | PIPE | ||
4H-6112 | [1] | BREATHER | ||
4. | 378-9517 Y | [1] | DRIVE GP-SWING (WITHOUT MOTOR) | |
5. | 489-3486 Y | [1] | MOTOR & MTG GP-SWING | |
1U-8846 BF | SEALANT-GASKET | |||
B | USE AS REQUIRED | |||
F | NOT SHOWN | |||
Y | SEPARATE ILLUSTRATION |
#M00852370658
536-7286: DRIVE GP-SWING
Parts for your 320 GC EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
(NO BREAKDOWN OF SERVICEABLE PARTS AVAILABLE AT TIME OF PUBLICATION) |
#M00852370659
560-2474: DRIVE GP-SWING
Parts for your 320 GC EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 6V-5200 | [1] | RING-RETAINING | |
2. | 6V-7238 | [1] | VALVE-SHUTOFF (TRANSMISSION OIL) | |
3. | 227-6221 | [1] | BREATHER AS (SWING DRIVE) | |
4H-6112 | [1] | BREATHER (SWING DRIVE) | ||
227-6215 | [1] | BOSS (1/4-18-THD) | ||
267-6785 | [1] | PIPE | ||
4. | 453-3446 M | [12] | BOLT (M12X1.75X35-MM) | |
5. | 114-1398 | [1] | GAUGE-OIL LEVEL (SWING DRIVE) | |
6. | 114-1399 | [1] | PIPE-GAUGE | |
7. | 3K-0360 | [1] | SEAL-O-RING | |
8. | 451-2182 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
9. | 489-3487 Y | [1] | MOTOR GP-SWING | |
10. | 536-7286 Y | [1] | DRIVE GP-SWING (WITHOUT MOTOR) | |
1U-8846 BF | SEALANT-GASKET | |||
B | USE AS REQUIRED | |||
F | NOT SHOWN | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
Information:
HYDRAULIC SYSTEM
CYLINDER GP
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Specifications
Systems Operation
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Disassembly and Assembly
Load Control Valve (Stick Cylinder) - Remove and Install
320GC, 320 and 323 Excavators Machine Systems
320GC, 320 and 323 Excavators Machine Systems
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
New Boom Cylinder Tube Assembly Is Now Used for Certain 320 GC, 320, and 323 Excavators {5057, 5456}
New Boom Cylinder Tube Assembly Is Now Used for Certain 320 GC, 320, and 323 Excavators {5057, 5456}
New Boom Cylinder Tube Assembly Is Now Used for Certain 320 GC, 320, and 323 Excavators {5057, 5456}