ELECTRICAL AND STARTING SYSTEM
SENSOR GPSTARTING AID GP
STARTING MOTOR GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
#M00858330290
344-1211: SENSOR GP-PRESSURE
344-1211 SENSOR GP-PRESSURE
S/N MKL1-UP
PART OF 415-2405 MANIFOLD GP-INLET
AN ATTACHMENT
S/N MKL1-UP
PART OF 415-2405 MANIFOLD GP-INLET
AN ATTACHMENT
For full view, you need register
Parts for your 973 TRACK LOADER:
CATERPILLAR SIS#M00858330291
385-1173: SENSOR GP-PRESSURE
385-1173 SENSOR GP-PRESSURE
S/N SYE1034-UP
PART OF 397-8790 SENSOR GP-ENGINE
AN ATTACHMENT
S/N SYE1034-UP
PART OF 397-8790 SENSOR GP-ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your 973 TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 341-0643 | [2] | SEAL-RECTANGULAR |
#M00858330292
415-2418: SENSOR GP-PRESSURE
415-2418 SENSOR GP-PRESSURE
S/N MKL1-UP
PART OF 428-8781 SENSOR & MTG GP-PRESSURE
AN ATTACHMENT
S/N MKL1-UP
PART OF 428-8781 SENSOR & MTG GP-PRESSURE
AN ATTACHMENT
For full view, you need register
Parts for your 973 TRACK LOADER:
CATERPILLAR SIS#M00858330293
236-6221: SENSOR GP-SPEED
236-6221 SENSOR GP-SPEED -ENGINE TIMING
S/N SYE1034-UP
PART OF 397-8790 SENSOR GP-ENGINE
AN ATTACHMENT
S/N SYE1034-UP
PART OF 397-8790 SENSOR GP-ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your 973 TRACK LOADER:
CATERPILLAR SIS#M00858330294
234-5012: SENSOR GP-TEMPERATURE
234-5012 SENSOR GP-TEMPERATURE
S/N SYE1034-UP
PART OF 397-8790 SENSOR GP-ENGINE
AN ATTACHMENT
S/N SYE1034-UP
PART OF 397-8790 SENSOR GP-ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your 973 TRACK LOADER:
CATERPILLAR SIS#M00858330295
234-5013: SENSOR GP-TEMPERATURE
234-5013 SENSOR GP-TEMPERATURE
S/N SYE1034-UP; MKL1-UP
PART OF 349-4570 BASE GP-FUEL FILTER, 397-8790 SENSOR GP-ENGINE, 495-1368, 507-7177 WIRING GP-DEF MODULE
AN ATTACHMENT
S/N SYE1034-UP; MKL1-UP
PART OF 349-4570 BASE GP-FUEL FILTER, 397-8790 SENSOR GP-ENGINE, 495-1368, 507-7177 WIRING GP-DEF MODULE
AN ATTACHMENT
For full view, you need register
Parts for your 973 TRACK LOADER:
CATERPILLAR SIS#M00858330296
373-5283: SENSOR GP-TEMPERATURE
373-5283 SENSOR GP-TEMPERATURE
S/N MKL1-UP
4 PIN ANALOG EXHAUST
PART OF 388-4261 WIRING GP-ELECTRONIC CONTROL
AN ATTACHMENT
S/N MKL1-UP
4 PIN ANALOG EXHAUST
PART OF 388-4261 WIRING GP-ELECTRONIC CONTROL
AN ATTACHMENT
For full view, you need register
Parts for your 973 TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#M00858330297
374-4768: SENSOR GP-TEMPERATURE
374-4768 SENSOR GP-TEMPERATURE
S/N MKL1-UP
4 PIN ANALOG EXHAUST
PART OF 388-4261 WIRING GP-ELECTRONIC CONTROL
AN ATTACHMENT
S/N MKL1-UP
4 PIN ANALOG EXHAUST
PART OF 388-4261 WIRING GP-ELECTRONIC CONTROL
AN ATTACHMENT
For full view, you need register
Parts for your 973 TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#M00858330298
375-3211: STARTING AID GP-ETHER
375-3211 STARTING AID GP-ETHER
S/N MKL1-UP
PART OF 476-5773, 504-8316 INSTALLATION AR-ENGINE
AN ATTACHMENT
S/N MKL1-UP
PART OF 476-5773, 504-8316 INSTALLATION AR-ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your 973 TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-2059 | [1] | CLAMP AS (CYLINDER) | |
| 2. | 239-1134 Y | [1] | VALVE GP-ETHER STARTING (24-VOLT) | |
| 3. | 241-4194 | [1] | FITTING AS (CONTROL) | |
| 236-4545 | [1] | NUT-SLEEVE (5/16-24-THD) | ||
| 4. | 387-7832 | [1] | ATOMIZER GP-ETHER | |
| 236-4545 | [1] | NUT-SLEEVE (5/16-24-THD) | ||
| 5. | 396-7555 | [1] | BRACKET AS | |
| 6. | 396-7556 | [1] | BRACKET AS | |
| 7. | 396-7557 | [1] | BRACKET AS | |
| 8. | 1S-4305 | [1] | SPACER (0.531X1X0.56-IN THK) | |
| 9. | 6V-5839 | [4] | WASHER (11X21X2.5-MM THK) | |
| 10. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 11. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| 12. | 8T-4189 M | [8] | BOLT (M8X1.25X20-MM) | |
| 13. | 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 174-9169 E | TUBE (23-CM) | ||
| 7N-0296 A | [1] | CYLINDER AS-ETHER (STARTING AID) | ||
| (MUST BE PROCURED LOCALLY FROM YOUR CAT DEALER) | ||||
| A | NOT PART OF THIS GROUP | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00858330299
349-6530: STARTING MOTOR GP-ELECTRIC
349-6530 STARTING MOTOR GP-ELECTRIC
S/N MKL1-UP
24-VOLT
PART OF 458-8635 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
S/N MKL1-UP
24-VOLT
PART OF 458-8635 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
For full view, you need register
Parts for your 973 TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7M-0326 | [1] | CONNECTOR | |
| 2. | 9H-3757 | [2] | WASHER (0.516X1X0.094-IN THK) | |
| 3. | 1S-7446 | [3] | SCREW-MACHINE (8-32X0.437-IN) | |
| 4. | 8C-9660 | [3] | WASHER (4.6X7.9X0.8-MM THK) | |
| 5. | 9S-2544 | [9] | SCREW-HEX HEAD (8-32X11.13-MM) | |
| 6. | 7M-0327 | [1] | WASHER-THRUST (17.4X25.4X1.6-MM THK) | |
| 7. | 3T-3418 | [1] | FRAME AS-END | |
| 3T-3423 | [1] | CUP | ||
| 3T-3424 | [1] | PLUG-FELT | ||
| 9G-4101 | [1] | BUSHING-END | ||
| 8. | 3T-9525 Y | [1] | PLATE AS-BRUSH (STARTING MOTOR) | |
| 9. | 1T-0808 | [2] | WASHER (0.516X0.812X0.09-IN THK) | |
| 10. | 3T-3422 | [1] | WIRE AS | |
| 11. | 2J-8163 | [2] | SEAL-O-RING | |
| 12. | 7X-3373 | [1] | BOLT (5/16-18X0.88-IN) | |
| 13. | 5J-5314 | [5] | BOLT (5/16-18X1.5-IN) | |
| 14. | 3L-3380 | [1] | BUSHING-TERMINAL | |
| 15. | 8C-3089 | [1] | SEAL-O-RING | |
| 16. | 4M-1853 | [1] | LEVER AS-SHIFT | |
| 17. | 5M-3034 | [1] | LOCKNUT (5/16-24-THD) | |
| 18. | 7L-2894 | [4] | GASKET | |
| 19. | 4M-1831 | [4] | PLUG-LEVER HOUSING | |
| 20. | 4M-1854 | [1] | SHAFT-LEVER | |
| 21. | 1H-1023 | [1] | SEAL-O-RING | |
| 22. | 2D-6392 | [1] | SEAL-O-RING | |
| 23. | 7T-3974 | [1] | HOUSING AS-DRIVE | |
| 24. | 6N-3826 | [1] | DRIVE AS-MOTOR | |
| 25. | 2H-3429 | [1] | RING-RETAINING | |
| 26. | 6V-1322 | [4] | BOLT (1/4-20X0.375-IN) | |
| 27. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 28. | 6N-3279 | [1] | INSULATOR | |
| 29. | 0S-1597 | [13] | BOLT (1/4-28X1-IN) | |
| 30. | 1M-9971 | [1] | SPACER (0.835X1.72X0.188-IN THK) | |
| 31. | 1H-2629 | [3] | STRIP-INSULATION | |
| 32. | 7M-0324 | [1] | COIL AS-FIELD | |
| 33. | 3R-8797 | [12] | SCREW & WASHER AS (3/8-24X0.72-IN) | |
| 34. | 7F-3488 | [6] | SHOE-POLE | |
| 35. | 7M-8651 | [1] | ARMATURE AS | |
| 36. | 7M-0325 | [1] | INSULATOR | |
| 37. | 3T-9524 | [6] | BRUSH AS | |
| 38. | 3N-3763 | [1] | KIT-TERMINAL (STARTING MOTOR) | |
| 40. | 3R-8801 | [1] | CLAMP | |
| 41. | 8F-1434 | [2] | LOCKWASHER | |
| 42. | 6V-8188 | [6] | NUT (1/2-13-THD) | |
| 43. | 7X-0562 | [6] | WASHER-HARD (13.5X19X0.8-MM THK) | |
| 44. | 4B-2049 | [6] | NUT (10-32-THD) | |
| 45. | 8T-0328 | [10] | WASHER-HARD (5.5X10X1-MM THK) | |
| 46. | 3T-9494 | [6] | SPRING | |
| 47. | 349-6255 | [1] | HOUSING AS | |
| 48. | 9G-4101 | [1] | BUSHING-END | |
| 49. | 3T-3424 | [3] | PLUG-FELT | |
| 50. | 3T-3423 | [3] | CUP | |
| 51. | 1M-9968 | [1] | BUSHING | |
| 52. | 2F-6678 | [1] | SEAL-LIP TYPE | |
| 53. | 4L-2729 | [1] | WASHER (0.844X1.9X0.188-IN THK) | |
| 54. | 4M-1896 | [1] | BUSHING-TERMINAL | |
| 55. | 045-4065 | [4] | SCREW-MACHINE (10-32X0.75-IN) | |
| 56. | 125-6535 | [1] | COVER-STARTING MOTOR | |
| 57. | 338-3453 | [1] | SOLENOID AS-STARTING MOTOR (24-VOLT) | |
| 3R-8801 | [1] | CLAMP | ||
| 58. | 352-7994 | [1] | KIT-SWITCH (RELAY, STARTER) | |
| (KIT INCLUDES STARTER RELAY SWITCH AS, JUMP START PROTECTION COVER, BOLTS, ANCHOR & CLAMP) | ||||
| 59. | 3T-3434 | [6] | PLUG | |
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Special Instruction
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
NOx Sensors Handling and Installation Procedures {191N}
NOx Sensors Handling and Installation Procedures {191N}
NOx Sensors Handling and Installation Procedures {191N}
Specifications
Systems Operation
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Temperature Sensor (Catalyst Inlet) - Remove and Install
C9.3 Engines for Caterpillar Built Machines
C9.3 Engines for Caterpillar Built Machines
Pressure Sensor (ARD Combustion Air) - Remove and Install
C9.3 Engines for Caterpillar Built Machines
C9.3 Engines for Caterpillar Built Machines
Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C9.3 Engines for Caterpillar Built Machines
C9.3 Engines for Caterpillar Built Machines
Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
973K Track-Type Loader Engine Supplement
973K Track-Type Loader Engine Supplement
Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
973K Track-Type Loader Engine Supplement
973K Track-Type Loader Engine Supplement
