558-1932 INSTALLATION AR-ENGINE S/N HEX10001-UP PART OF 490-7664 EXCAVATOR AR 320 EXCAVATOR

Part No	Qty	Parts name
490-4829 Y	[1]	DRAIN GP-ENGINE OIL
490-4820 Y	[1]	FILTER & MTG GP-ENGINE OIL
561-6440 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (FILLER)
502-6790 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK)
490-4825 Y	[1]	LINES GP-AIR
489-8907 Y	[1]	LINES GP-COOLING
491-0488 Y	[1]	LINES GP-DIESEL EXHAUST FLUID
557-8797 Y	[1]	LINES GP-FUEL
491-0489 Y	[1]	LINES GP-WATER
490-4833 Y	[1]	MOUNTING GP-ENGINE
Y	[1]	PIPE GP-EXHAUST
490-4854 Y	[1]	SENSOR & MTG GP-SOOT
486-7831 Y	[1]	STARTING MOTOR GP-ELECTRIC
491-3411 Y	[1]	TANK & MTG GP-DEF
Y		SEPARATE ILLUSTRATION

#M00859730141

558-7709: INSTALLATION AR-ENGINE

INSTALLATION AR-ENGINE

558-7709 INSTALLATION AR-ENGINE
S/N HEX10001-UP
PART OF 510-7418 COMMON AR

i07433242 M0085973

For full view, you need register

Parts for your 320 EXCAVATOR:

Part No	Qty	Parts name
Y	[1]	AIR CLEANER GP
558-7629 Y	[1]	COOLING GP
341-5368 Y	[1]	COUPLING GP-PUMP
489-8980 Y	[1]	FAN GP-SUCTION
Y		SEPARATE ILLUSTRATION

#M00859730142

490-4806: MODULE AR-ENGINE & CEM

MODULE AR-ENGINE & CEM

490-4806 MODULE AR-ENGINE & CEM -EXHAUST
S/N HEX1-UP
PART OF 490-7664 EXCAVATOR AR

i07094632 M0085973

For full view, you need register

Parts for your 320 EXCAVATOR:

Part No	Qty	Parts name
502-9408 Y	[1]	COMPRESSOR & MTG GP-REFRIG
515-1177 Y	[1]	ENGINE AR-COMPLETE
454-8382 Y	[1]	MODULE AR-CLEAN EMISSIONS
466-8286 Y	[1]	PUMP GP-DIESEL EXHAUST FLUID
Y		SEPARATE ILLUSTRATION

#M00859730143

507-6093: BELT TENSIONER GP

BELT TENSIONER GP

507-6093 BELT TENSIONER GP
S/N W7N1-UP
PART OF 489-8185 ENGINE AR-PRIMARY

i07119385 M0085973

For full view, you need register

Parts for your 320 EXCAVATOR:

Pos.	Part No	Qty	Parts name	Comments
1.	369-1255	[1]	TENSIONER

#M00859730144

339-5858: CAMSHAFT GP

CAMSHAFT GP

339-5858 CAMSHAFT GP
S/N W7N1-UP
PART OF 489-8185 ENGINE AR-PRIMARY

i04527616 M0085973

For full view, you need register

Parts for your 320 EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	319-8426	[8]	PUSHROD
2.	385-4313	[8]	TAPPET
3.	363-3890	[1]	CAMSHAFT GP
	1B-8736	[1]	KEY-WOODRUFF

#M00859730145

347-4530: COVER GP-VALVE MECHANISM

COVER GP-VALVE MECHANISM

347-4530 COVER GP-VALVE MECHANISM
S/N W7N1-UP
PART OF 355-5043 COVER GP-VALVE MECHANISM

i07119422 M0085973

3474530 COVER GP-VALVE MECHANISM Parts scheme

For full view, you need register

Parts for your 320 EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	333-8052	[1]	SEAL (VALVE COVER)
2.	347-4119	[1]	CAP-BREATHER (VALVE)
3.	326-7289	[1]	SEAL-O-RING
4.	195-9245 M	[3]	SCREW (M4X0.7X10-MM)
	M		METRIC PART

#M00859730146

355-5043: COVER GP-VALVE MECHANISM

COVER GP-VALVE MECHANISM

355-5043 COVER GP-VALVE MECHANISM
S/N W7N1-UP
PART OF 489-8185 ENGINE AR-PRIMARY

i07115381 M0085973

3555043 COVER GP-VALVE MECHANISM Parts scheme

For full view, you need register

Parts for your 320 EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	347-4530 Y	[1]	COVER GP-VALVE MECHANISM
2.	6I-0260 M	[11]	BOLT (M8X1.25X25-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#M00859730147

466-8480: CRANKSHAFT AS

CRANKSHAFT AS

466-8480 CRANKSHAFT AS
S/N W7N1-UP
PART OF 364-5843 CRANKSHAFT GP

i06818709 M0085973

For full view, you need register

Parts for your 320 EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	276-7394 M	[3]	SCREW (M6X1XX12-MM)
2.	332-0137	[1]	GEAR-CRANKSHAFT (106-TEETH)
3.	339-8780	[1]	DOWEL
4.	376-4078	[1]	DISC-TIMING
5.	466-4921	[1]	CRANKSHAFT
	M		METRIC PART

#M00859730148

364-5817: CRANKSHAFT GP

CRANKSHAFT GP

364-5817 CRANKSHAFT GP
S/N W7N1-UP
PART OF 489-8185 ENGINE AR-PRIMARY

i06273748 M0085973

For full view, you need register

Parts for your 320 EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	067-6135	[1]	KEY-WOODRUFF
2.	L	[5]	BEARING-CRANKSHAFT (STANDARD-UPPER)
3.		[5]	BEARING-CRANKSHAFT (STANDARD-LOWER)
4.	338-1402	[1]	GEAR-CRANKSHAFT (36-TEETH)
5.	466-8479 C	[1]	CRANKSHAFT AS
5A.	339-8780	[1]	DOWEL
5B.	376-4078	[1]	DISC-TIMING
5C.	466-4921	[1]	CRANKSHAFT
5D.	276-7394 M	[3]	SCREW (M6X1XX12-MM)
6.	363-0559 J	[2]	WASHER-THRUST

			AVAILABLE REPAIR KIT(S):
	518-5431 L	[1]	KIT-BEARING (CRANKSHAFT)
			(INCLUDES BEARINGS)
	518-5432 AB		KIT-BEARING (0.254-MM US)
			(INCLUDES BEARINGS)
	518-5433 AB		KIT-BEARING (0.508-MM US)
			(INCLUDES BEARINGS)
	518-5436 AB		KIT-BEARING (0.762-MM US)
			(INCLUDES BEARINGS)
	364-5145 J	[1]	KIT-WASHER (STANDARD)(CRANKSHAFT)
			(INCLUDES THRUST WASHERS)
	448-4227 AB		KIT-WASHER (0.20-MM US)
			(INCLUDES THRUST WASHERS)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICES PART(S) MARKED J
	L		KIT MARKED L SERVICES PART(S) MARKED L
	M		METRIC PART

#M00859730149

364-5843: CRANKSHAFT GP

CRANKSHAFT GP

364-5843 CRANKSHAFT GP
S/N W7N1-UP
AXIAL PTO & BALANCER
PART OF 384-4917 CYLINDER BLOCK GP-SHORT

i06818703 M0085973

For full view, you need register

Parts for your 320 EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	067-6135	[1]	KEY-WOODRUFF
2.	317-5485 LP	[5]	BEARING
3.	317-5486 LP	[5]	BEARING
4.	338-1402	[1]	GEAR-CRANKSHAFT (36-TEETH)
5.	342-6508	[1]	SHIM (0.1-MM THK)
6.	363-0559 J	[2]	WASHER-THRUST
7.	466-8480 CY	[1]	CRANKSHAFT AS

			AVAILABLE REPAIR KIT(S):
	360-1978 L	[1]	KIT-BEARING (STANDARD)(CRANKSHAFT)
			(INCLUDES BEARINGS)
	360-3988 P		KIT-BEARING (STANDARD)(CRANKSHAFT MAIN BEARING)
			(INCLUDES BEARINGS)
	364-5145 J		KIT-WASHER (STANDARD)(CRANKSHAFT)
			(INCLUDES WASHERS)
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICES PART(S) MARKED J
	L		KIT MARKED L SERVICES PART(S) MARKED L
	P		KIT MARKED P SERVICES PART(S) MARKED P
	Y		SEPARATE ILLUSTRATION

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Operation and Maintenance Manual

Emissions Certification Film
320 GC, 320 and 323 Excavator

Severe Service Application
320 GC, 320 and 323 Excavator

Emissions Certification Film
320 GC, 320 and 323 Excavator

Prepare the Machine for Maintenance
320 GC, 320 and 323 Excavator

Special Instruction

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Recommended Storage Procedures For Hydraulic Excavators {0355, 1000, 1250, 7000}
Recommended Storage Procedures For Hydraulic Excavators {0355, 1000, 1250, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Technical Information Bulletin

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Incorrect Refill Capacity Values in Operation and Maintenance Manual on Certain 320 GC, 320 and 323 Excavators {1000, 7000}
Incorrect Refill Capacity Values in Operation and Maintenance Manual on Certain 320 GC, 320 and 323 Excavators {1000, 7000}

Specifications

Engine Design
C4.4 Engines for Caterpillar Built Machines

Tool Operating Manual

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}

320 GC, 320, and 323 Excavator TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
320 GC, 320, and 323 Excavator TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}

Troubleshooting

Acceleration Is Poor or Throttle Response Is Poor
C4.4 Engines

Engine Cranks but Does Not Start
C4.4 Engines

Engine Misfires, Runs Rough or Is Unstable
C4.4 Engines

Engine Overspeeds
C4.4 Engines

Engine Stalls at Low RPM
C4.4 Engines

Engine Top Speed Is Not Obtained
C4.4 Engines

Engine Vibration Is Excessive
C4.4 Engines

Power Is Intermittently Low or Power Cutout Is Intermittent
C4.4 Engines

General Information
C4.4 Engines

Welding Precaution
C4.4 Engines

Service Information Report
C4.4 Engines

System Overview
C4.4 Engines

Engine Does Not Crank
C4.4 Engines

Engine Has Mechanical Noise (Knock)
C4.4 Engines

Component Location
C4.4 Engines

Disassembly and Assembly

Engine - Remove and Install
320GC and 320 Excavator Engine Supplement

Water Pump - Remove and Install
320GC and 320 Excavator Engine Supplement

System Pressure - Release
320GC and 320 Excavator Engine Supplement

Service Magazine

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

Diesel Exhaust Fluid (DEF) Pump Filter Maintenance Interval On Certain C4.4 Machine Engines {1000, 108J, 7000}
Diesel Exhaust Fluid (DEF) Pump Filter Maintenance Interval On Certain C4.4 Machine Engines {1000, 108J, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 320 :

511-4775 INSTALLATION AR-ENGINE

490-4810 INSTALLATION AR-ENGINE

489-8185 ENGINE AR-PRIMARY

515-1177 ENGINE AR-COMPLETE

528-0063 SPECIAL AR

561-8888 OPTION AR-LINKAGE

560-3319 OPTION AR-LINKAGE

560-3318 OPTION AR-LINKAGE

558-7709 INSTALLATION AR-ENGINE

490-4806 MODULE AR-ENGINE & CEM

507-6093 BELT TENSIONER GP

339-5858 CAMSHAFT GP

347-4530 COVER GP-VALVE MECHANISM

355-5043 COVER GP-VALVE MECHANISM

466-8480 CRANKSHAFT AS

364-5817 CRANKSHAFT GP

Truck sale:

USD $6,500

CAT 3204

JJ Rebuilders
Medley, Florida

558-1932 INSTALLATION AR-ENGINE S/N HEX10001-UP PART OF 490-7664 EXCAVATOR AR 320 EXCAVATOR

ENGINE ARRANGEMENT