AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

489-0373 BOOM GP S/N HEX1-UP PART OF 490-7670 BOOM AR-REACH 320 EXCAVATOR


IMPLEMENTS
BOOM GP
LINES GP-GREASE

EXCAVATOR 320 EXCAVATOR HEX
 320 Excavator HEX00001-UP (MACHINE) POWERED BY C4.4 Engine M0085973 320 HEX   (2015)

IMPLEMENTS

BOOM GP
490-7671 BOOM AR-REACH
570-5244 BOOM AR-REACH
BOOM GP
489-0373 BOOM GP
BOOM GP
489-0379 BOOM GP
BOOM GP
489-0414 BOOM GP
BOOM GP
570-2331 BOOM GP
 

#M00859730990
 

489-0373: BOOM GP

489-0373 BOOM GP
S/N HEX1-UP
PART OF 490-7670 BOOM AR-REACH
i07107437 M0085973
4890373 BOOM GP Parts scheme
  For full view, you need register

Parts for your 320 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 166-1495 [2] SEAL-LIP TYPE  
2. 4I-3308 [2] PLATE  
3. 4I-3309 [2] SPACER (82X110X3-MM THK)  
4. 4I-4809 [1] PIN AS  
5. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
7. 093-0084 B [2] SHIM (1-MM THK)  
8. 093-0349 [1] WASHER (22X60X6-MM THK)  
9. 093-0363 [1] SPACER (83X120X12-MM THK)  
10. 113-2127 B [1] SHIM (0.5-MM THK)  
11. 166-1486 [2] SHIM (2-MM THK)  
12. 166-1487 [2] SHIM (2-MM THK)  
13. 437-3391 [1] PIN  
14. 324-0938 [1] PLATE  
15. 346-7276 [1] PIN AS  
16. 451-2175 [2] WASHER-HARD (17.5X30X3.5-MM THK)  
17. 451-2176 [1] WASHER-HARD (22X35X3.5-MM THK)  
18. 453-1259 M [2] BOLT (M16X2X40-MM)  
19. 453-2844 M [1] BOLT (M20X2.5X30-MM)  
20. 489-0374 [1] BOOM & BEARING AS  
20A. 489-3008 [2] BEARING-SLEEVE  
21. 093-0116 [2] SHIM (2-MM THK)  
22. 093-0116 B [1] SHIM (2-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#M00859730991
 

489-0379: BOOM GP

489-0379 BOOM GP
S/N HEX1-UP
PART OF 490-7671 BOOM AR-REACH
i07118212 M0085973
4890379 BOOM GP Parts scheme
  For full view, you need register

Parts for your 320 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 166-1495 [2] SEAL-LIP TYPE  
2. 4I-3308 [2] PLATE  
3. 4I-3309 [2] SPACER (82X110X3-MM THK)  
4. 4I-4809 [1] PIN AS  
5. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
7. 093-0084 B [2] SHIM (1-MM THK)  
8. 093-0116 [2] SHIM (2-MM THK)  
9. 093-0349 [1] WASHER (22X60X6-MM THK)  
10. 093-0363 [1] SPACER (83X120X12-MM THK)  
11. 113-2127 B [1] SHIM (0.5-MM THK)  
12. 166-1486 [2] SHIM (2-MM THK)  
13. 166-1487 [2] SHIM (2-MM THK)  
14. 437-3391 [1] PIN  
15. 324-0938 [1] PLATE  
16. 346-7276 [1] PIN AS  
17. 451-2175 [2] WASHER-HARD (17.5X30X3.5-MM THK)  
18. 451-2176 [1] WASHER-HARD (22X35X3.5-MM THK)  
19. 453-1259 M [2] BOLT (M16X2X40-MM)  
20. 453-2844 M [1] BOLT (M20X2.5X30-MM)  
21. 489-0380 [1] BOOM & BEARING AS  
21A. 489-3008 [2] BEARING-SLEEVE  
22. 093-0116 B [1] SHIM (2-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#M00859730992
 

489-0414: BOOM GP

489-0414 BOOM GP
S/N HEX1-UP
8850-MM (348.4-IN)
PART OF 490-7669 BOOM AR
i07115361 M0085973
4890414 BOOM GP Parts scheme
  For full view, you need register

Parts for your 320 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-3308 [2] PLATE  
2. 4I-3309 [2] SPACER (82X110X3-MM THK)  
3. 4I-4618 [1] PIN AS  
4. 093-0084 B [2] SHIM (1-MM THK)  
5. 093-0349 [1] WASHER (22X60X6-MM THK)  
6. 093-0363 [1] SPACER (83X120X12-MM THK)  
7. 113-2127 B [1] SHIM (0.5-MM THK)  
8. 166-1486 [2] SHIM (2-MM THK)  
9. 166-1487 [2] SHIM (2-MM THK)  
10. 166-1495 [2] SEAL-LIP TYPE  
11. 437-3391 [1] PIN  
12. 324-0938 [1] PLATE  
13. 564-9028 [1] PIN AS  
14. 451-2175 [2] WASHER-HARD (17.5X30X3.5-MM THK)  
15. 451-2176 [1] WASHER-HARD (22X35X3.5-MM THK)  
16. 451-2182 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 453-1259 M [2] BOLT (M16X2X40-MM)  
18. 453-2844 M [1] BOLT (M20X2.5X30-MM)  
19. 453-3446 M [6] BOLT (M12X1.75X35-MM)  
20. 526-7139 [1] BOOM & BEARING AS  
20A. 489-3008 [2] BEARING-SLEEVE  
  B   USE AS REQUIRED
  M   METRIC PART
 

#M00859730993
 

570-2331: BOOM GP

570-2331 BOOM GP -REACH
S/N HEX1-UP
5.7-M (18.7-FT). GRADE CONTROL
PART OF 570-5244 BOOM AR-REACH
i07576537 M0085973
5702331 BOOM GP Parts scheme
  For full view, you need register

Parts for your 320 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 166-1495 [2] SEAL-LIP TYPE  
2. 4I-3308 [2] PLATE  
3. 4I-3309 [2] SPACER (82X110X3-MM THK)  
4. 4I-4809 [1] PIN AS  
5. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
7. 093-0084 B [2] SHIM (1-MM THK)  
8. 093-0349 [1] WASHER (22X60X6-MM THK)  
9. 093-0363 [1] SPACER (83X120X12-MM THK)  
10. 113-2127 B [1] SHIM (0.5-MM THK)  
11. 166-1486 [2] SHIM (2-MM THK)  
12. 166-1487 [2] SHIM (2-MM THK)  
13. 437-3391 [1] PIN  
14. 324-0938 [1] PLATE  
15. 451-2175 [2] WASHER-HARD (17.5X30X3.5-MM THK)  
16. 451-2176 [1] WASHER-HARD (22X35X3.5-MM THK)  
17. 453-1259 M [2] BOLT (M16X2X40-MM)  
18. 453-2844 M [1] BOLT (M20X2.5X30-MM)  
19. 564-9028 [1] PIN AS  
20. 566-0952 [1] BOOM & BEARING AS  
20A. 489-3008 [2] BEARING-SLEEVE  
  B   USE AS REQUIRED
  M   METRIC PART
 

#M00859730994
 

489-0410: BOOM GP-FORE

489-0410 BOOM GP-FORE
S/N HEX1-UP
PART OF 531-3493 BOOM AR
i07113746 M0085973
4890410 BOOM GP-FORE Parts scheme
  For full view, you need register

Parts for your 320 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-4618 [1] PIN AS  
2. 4I-4621 [1] PIN AS  
3. 093-0083 B [1] SHIM (1-MM THK)  
4. 093-0363 [1] SPACER (83X120X12-MM THK)  
5. 093-0366 [1] SPACER (93X130X12-MM THK)  
6. 093-0084 B [2] SHIM (1-MM THK)  
7. 093-0115 B [1] SHIM (2-MM THK)  
8. 093-0116 J [2] SHIM (2-MM THK)  
9. 093-0349 [2] WASHER (22X60X6-MM THK)  
10. 133-2425 B [2] SHIM (0.5-MM THK)  
11. 113-2127 B [4] SHIM (0.5-MM THK)  
12. 166-1487 B [4] SHIM (2-MM THK)  
13. 166-1495 [2] SEAL-LIP TYPE  
14. 324-0938 [1] PLATE  
15. 564-9028 [1] PIN AS  
16. 451-2176 [2] WASHER-HARD (22X35X3.5-MM THK)  
17. 453-2844 M [2] BOLT (M20X2.5X30-MM)  
18. 451-2175 [2] WASHER-HARD (17.5X30X3.5-MM THK)  
19. 453-1259 M [2] BOLT (M16X2X40-MM)  
20. 527-7824 [1] BOOM & BEARING AS  
20A. 489-3008 [2] BEARING-SLEEVE  
21. 093-0116 B [2] SHIM (2-MM THK)  
  B   USE AS REQUIRED
  J   USE ONLY ON OPTIONAL DESIGN BOOM END
  M   METRIC PART
 

#M00859730995
 

489-0411: BOOM GP-STUB

489-0411 BOOM GP-STUB
S/N HEX1-UP
PART OF 531-3493 BOOM AR
i07113742 M0085973
4890411 BOOM GP-STUB Parts scheme
  For full view, you need register

Parts for your 320 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 4I-3308 [2] PLATE  
3. 4I-3309 [2] SPACER (82X110X3-MM THK)  
4. 4I-4621 [1] PIN AS  
5. 093-0084 B [2] SHIM (1-MM THK)  
6. 093-0116 B [2] SHIM (2-MM THK)  
7. 093-0349 [2] WASHER (22X60X6-MM THK)  
8. 093-0366 [2] SPACER (93X130X12-MM THK)  
9. 113-2127 B [4] SHIM (0.5-MM THK)  
10. 166-1486 [2] SHIM (2-MM THK)  
11. 166-1487 [2] SHIM (2-MM THK)  
12. 166-1495 [2] SEAL-LIP TYPE  
13. 437-3391 [1] PIN  
14. 527-7827 [1] BOOM & BEARING AS  
14A. 489-3008 [2] BEARING-SLEEVE  
15. 264-1702 [1] PIN AS  
16. 451-2176 [2] WASHER-HARD (22X35X3.5-MM THK)  
17. 451-2182 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 453-2844 M [2] BOLT (M20X2.5X30-MM)  
19. 453-3446 M [6] BOLT (M12X1.75X35-MM)  
20. 471-5225 B [4] SHIM (0.5-MM THK)  
21. 471-5226 B [2] SHIM (1-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#M00859730996
 

127-6625: LINES GP-GREASE

127-6625 LINES GP-GREASE -STICK
S/N HEX1-UP
PART OF 531-3494 STICK AR
i01342049 M0085973
1276625 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your 320 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-7238 [2] TUBE AS  
2. 5I-7239 [1] TUBE AS  
3. 132-1531 [1] TUBE AS  
4. 087-5966 I [2] HOSE AS  
    (EACH INCLUDES)
  105-6431 [1] CONNECTOR  
5. 8T-4191 M [10] BOLT (M10X1.5X16-MM)  
6. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
7. 8M-2772 [10] CLIP (LOOP)  
8. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
9. 6L-3616 [3] CONNECTOR  
10. 5K-9242 [2] UNION-FLARED  
11. 5H-8936 [1] ADAPTER  
12. 5K-9243 [1] ELBOW-FLARED  
13. 6V-3342 [1] ELBOW-PIPE  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00859730997
 

364-5098: LINES GP-GREASE

364-5098 LINES GP-GREASE -FORE BOOM
S/N HEX1-UP
PART OF 531-3493 BOOM AR
i04533786 M0085973
3645098 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your 320 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
2. 7J-8611 [1] ELBOW-PIPE  
3. 087-5838 [2] PLATE  
4. 107-9975 I [1] HOSE AS  
  105-6431 [1] CONNECTOR  
5. 272-2298 [1] TUBE AS  
6. 272-2299 [1] TUBE AS  
7. 272-2300 [1] TUBE AS  
8. 272-2302 [1] TUBE AS  
9. 272-2303 [1] TUBE AS  
10. 344-6932 [1] TUBE AS  
11. 344-6935 I [1] HOSE AS  
  105-6431 [1] CONNECTOR  
12. 033-8248 [7] CLIP (LOOP)  
13. 2N-1931 [1] ELBOW-PIPE  
14. 6L-3616 [12] CONNECTOR  
15. 8M-2772 [6] CLIP (LOOP)  
16. 8T-4121 [17] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4133 M [17] NUT (M10X1.5-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00859730998
 

543-0213: LINES GP-GREASE

543-0213 LINES GP-GREASE
S/N HEX1-UP
PART OF 490-7670, 490-7671, 570-5244 BOOM AR-REACH
i07118213 M0085973
5430213 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your 320 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8485 [5] ELBOW  
2. 4I-4543 [1] TUBE AS  
3. 4I-4544 [1] TUBE AS  
4. 5K-9243 [2] ELBOW-FLARED  
5. 6L-3616 [2] CONNECTOR  
6. 134-9137 [1] HOSE AS  
7. 166-1579 [3] CLIP  
8. 216-6682 [2] HOSE AS  
    (EACH INCLUDES)
  105-6431 [1] CONNECTOR  
9. 033-8248 [3] CLIP (LOOP)  
10. 8M-2772 [2] CLIP (LOOP)  
11. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4133 M [5] NUT (M10X1.5-THD)  
13. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
  M   METRIC PART
 

#M00859730999
 

543-0214: LINES GP-GREASE

543-0214 LINES GP-GREASE
S/N HEX1-UP
8850-MM (348.4-IN) BOOM
PART OF 490-7669 BOOM AR
i07115371 M0085973
5430214 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your 320 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8485 [5] ELBOW  
2. 4I-4543 [1] TUBE AS  
3. 4I-4544 [1] TUBE AS  
4. 4I-6608 I [1] HOSE AS  
5. 5K-9243 [2] ELBOW-FLARED  
6. 6L-3616 [2] CONNECTOR  
7. 105-6458 I [1] HOSE AS  
8. 166-1579 [3] CLIP  
9. 342-1962 [1] HOSE AS  
10. 344-5675 M [5] NUT (M10X1.5-THD)  
11. 033-8248 [6] CLIP (LOOP)  
12. 5H-8936 [3] ADAPTER  
13. 8M-2772 [2] CLIP (LOOP)  
14. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4191 M [6] BOLT (M10X1.5X16-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING SHIMS ON THE FRONT PINS ON CERTAIN 320, 320GC, AND 323 NGH EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING SHIMS ON THE FRONT PINS ON CERTAIN 320, 320GC, AND 323 NGH EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-China
Service Letter-Asia
Service Letter-APD

Caterpillar Parts SIS Catalog 320 :

570-5244 BOOM AR-REACH
490-7671 BOOM AR-REACH
490-7670 BOOM AR-REACH
531-3493 BOOM AR
490-7669 BOOM AR
VALVE GP-TRAVEL COUNTERBALANCE
322-8714 VALVE GP-TRAVEL COUNTERBALANCE
VALVE GP-SOLENOID & RELIEF
545-9111 VALVE GP-SOLENOID & RELIEF
VALVE GP-SOLENOID & RELIEF
545-9109 VALVE GP-SOLENOID & RELIEF
BOOM GP
489-0379 BOOM GP
BOOM GP
489-0414 BOOM GP
BOOM GP
570-2331 BOOM GP
BOOM GP-FORE
489-0410 BOOM GP-FORE
BOOM GP-STUB
489-0411 BOOM GP-STUB
LINES GP-GREASE
127-6625 LINES GP-GREASE
LINES GP-GREASE
364-5098 LINES GP-GREASE
LINES GP-GREASE
543-0213 LINES GP-GREASE

Truck sale:

CAT 3204
USD $6,500 
CAT 3204

JJ Rebuilders
Medley, Florida
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.