AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

469-9353 CYLINDER GP-BUCKET -RH S/N MFY1-UP 80-MM (3.15-IN) BORE X 235.3-MM (9.26-IN) STROKE PART OF 476-8685, 476-8688, 484-0203, 484-0204 BUCKET GP-DITCH CLEANING 323F


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
FILTER GP

EXCAVATOR 323F EXCAVATOR MFY
 323F LN Excavator MFY00001-UP (MACHINE) POWERED BY C4.4 Engine M0086067 323F MFY   (2017)

HYDRAULIC SYSTEM

CYLINDER GP
341-2791 CYLINDER AR-BOOM
CYLINDER GP-BUCKET
469-9342 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
469-9353 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
575-1074 CYLINDER GP-BUCKET
CYLINDER GP-COUPLER
390-9505 CYLINDER GP-COUPLER
CYLINDER GP-HYDRAULIC
360-5447 CYLINDER GP-HYDRAULIC
 

#M00860670370
 

469-9353: CYLINDER GP-BUCKET

469-9353 CYLINDER GP-BUCKET -RH
S/N MFY1-UP
80-MM (3.15-IN) BORE X 235.3-MM (9.26-IN) STROKE
PART OF 476-8685, 476-8688, 484-0203, 484-0204 BUCKET GP-DITCH CLEANING
i06720342 M0086067
4699353 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 323F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 494-4314 C [1] HEAD GP-HYDRAULIC CYLINDER  
2A. 323-2467 J [1] RING-WEAR  
2B. 478-4175 J [1] SEAL-WIPER  
2C. 338-2444 J [1] SEAL-U-CUP  
2D. 340-9315 J [1] SEAL-O-RING  
  491-4780 [1] HEAD  
3. 323-4221 [1] PISTON AS  
3A. 161-7147 J [1] SEAL-PISTON  
3B. 340-9312 J [1] SEAL-O-RING  
3C. 343-8050 J [2] RING-WEAR  
  323-4220 [1] PISTON  
4. 350-3842 M [2] SETSCREW (M8X1.25X12.3-MM)  
5. 469-9350 [1] ROD AS  
5A. 475-4998 [1] BUSHING  
6. 469-9354 [1] CYLINDER AS-TILT  
6A. 475-4998 [1] BUSHING  
   
    AVAILABLE REPAIR KIT(S):
  501-6702 CJ [1] KIT-HYDRAULIC CYLINDER SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#M00860670371
 

575-1074: CYLINDER GP-BUCKET

575-1074 CYLINDER GP-BUCKET
S/N MFY1-UP
120-MM (4.7-IN) BORE X 1104-MM (43.5-IN) STROKE
PART OF 356-8787 CYLINDER & SEAL GP-BUCKET
i07741235 M0086067
5751074 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 323F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 087-5510 J [1] RING  
2. 095-1267 M [2] SETSCREW-SOCKET (M10X1.5-THD)  
3. 095-1717 J [1] SEAL-O-RING  
4. 102-2244 [1] GROMMET  
5. 114-0756 [1] BUSHING  
6. 126-2043 [1] HEAD  
7. 158-9063 J [2] RING  
8. 165-9286 J [1] SEAL-LIP TYPE  
9. 179-9674 J [1] RING  
10. 188-2199 [1] SEAL-O-RING  
11. 212-0907 [1] PLATE-CONNECTOR  
12. 215-1942 [1] RING-BACKUP  
13. 217-3312 [1] MAGNET  
14. 357-5257 [1] COVER  
15. 246-9113 [1] RETAINER  
16. 355-5818 J [1] SEAL-BUFFER  
17. 355-5820 J [1] SEAL-U-CUP  
18. 356-7529 [1] SENSOR GP-POSITION (LINEAR)(BUCKET CYLINDER)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
19. 357-0756 [1] PISTON  
20. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
21. 3E-3377 [1] WEDGE-RECEPTACLE LOCK (4-PIN)  
22. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
23. 486-4636 [1] ROD AS  
24. 486-6322 [1] CYLINDER AS  
25. 495-8191 J [1] SEAL AS  
26. 6V-8223 M [1] SETSCREW-SOCKET (M10X1.5X16-MM)  
27. 7Y-5116 J [1] RING  
28. 7Y-5119 [1] RING-RETAINING  
29. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
30. 8T-8737 [1] PLUG-SEAL  
31. 8T-8894 M [2] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
32. 9X-1386 E SLEEVE (9-CM)  
32A. 9X-1386 E SLEEVE (7-CM)  
   
    AVAILABLE REPAIR KIT(S):
  545-6415 J [1] KIT-SEAL  
    (ALSO INCLUDES RING SEAL)
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#M00860670372
 

390-9505: CYLINDER GP-COUPLER

390-9505 CYLINDER GP-COUPLER
S/N MFY1-UP
63.5-MM (2.5-IN) BORE X 116.8-MM (4.6-IN) STROKE
PART OF 388-0067 COUPLER GP-QUICK
i05859647 M0086067
3909505 CYLINDER GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 323F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 237-0947 J [1] VALVE GP-CHECK (PILOT OPERATED)  
2. 3J-1907 [1] SEAL-O-RING  
3. 3J-7354 [1] SEAL-O-RING  
4. 9S-8002 [1] PLUG (7/16-20-THD)  
5. 9S-8004 [1] PLUG (9/16-18-THD)  
6. 9F-2167 [1] SCREW-PURGE (3/8-24X1.164-IN)  
   
    AVAILABLE REPAIR KIT(S):
  213-8433 J [1] KIT-SEAL (CHECK VALVE)  
  453-6523 [1] KIT-PACKING (COUPLER CYLINDER)  
    (INCLUDES O-RINGS,SEALS & POLYPAK)
  J   KIT MARKED J SERVICES PART(S)MARKED J
 

#M00860670373
 

360-5447: CYLINDER GP-HYDRAULIC

360-5447 CYLINDER GP-HYDRAULIC -VARIABLE ADJUSTABLE BOOM
S/N MFY1-UP
160-MM (6.3-IN) BORE X 1050-MM (41.3-IN) STROKE
PART OF 279-8709 CYLINDER & SEAL GP-HYDRAULIC
i05760962 M0086067
3605447 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 323F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6C-6088 [1] HEAD  
2. 7Y-4622 [1] LOCKNUT (SPECIAL)  
3. 7Y-4631 [1] RING-RETAINING  
4. 087-5005 [1] STOP  
5. 103-8379 [1] RING  
6. 106-9595 [1] STOP  
7. 165-9288 J [1] SEAL-LIP TYPE  
8. 372-2151 C [1] SEAL-BUFFER  
9. 185-0592 [1] PISTON  
10. 247-8829 J [1] RING-SEAL  
11. 323-3838 C [1] CYLINDER AS-HYDRAULIC  
11A. 290-9182 [1] BUSHING  
12. 360-5446 [1] ROD AS  
12A. 290-9182 [1] BUSHING  
13. 087-5550 J [1] RING-BACKUP  
14. 095-0929 J [2] RING-RETAINING  
15. 095-1635 J [1] SEAL-O-RING  
16. 103-8378 [1] RING-RETAINING  
17. 185-0230 J [2] RING  
18. 185-0231 J [1] RING  
19. 372-2152 C [1] SEAL-U-CUP  
20. 5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
21. 5M-6214 [1] PLUG (1/8-27 PTF)  
22. 6C-6093 [1] BUSHING  
23. 7Y-4628 J [1] RING (BACKUP)  
24. 7Y-5239 M [8] BOLT-SOCKET HEAD (M24X3X100-MM)  
25. 9X-3604 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  362-9412 J [1] KIT-SEAL (CYLINDER)(VARIABLE ADJUSTABLE BOOM)  
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#M00860670374
 

333-2965: DRIVE & MTG GP-SWING

333-2965 DRIVE & MTG GP-SWING
S/N MFY1-UP
PART OF 370-5985 POWER TRAIN AR
i06942764 M0086067
3332965 DRIVE & MTG GP-SWING Parts scheme
  For full view, you need register

Parts for your 323F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2Y-5503 [2] CORK  
2. 201-7949 M [12] BOLT (M24X3X70-MM)  
3. 6V-8237 [12] WASHER (26X44X4-MM THK)  
4. 464-8726 CY [1] DRIVE GP-SWING (WITH MOTOR)  
5. 096-4755 [1] PIN  
6. 5D-1026 [1] CLAMP-BAND  
7. 5P-0767 E HOSE (90-CM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00860670375
 

378-9517: DRIVE GP-SWING

378-9517 DRIVE GP-SWING
S/N MFY1-UP
PART OF 464-8726 DRIVE GP-SWING
i06584497 M0086067
3789517 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 323F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-7238 [1] VALVE-SHUTOFF  
2. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
3. 148-4636 [1] SHAFT-PINION  
4. 148-4640 [1] RING-RETAINING  
5. 171-9383 [1] SPACER  
6. 199-4561 [2] SEAL-LIP TYPE  
7. 227-6228 [1] CAGE  
8. 367-8364 [1] GEAR-SUN (20-TEETH)  
9. 367-8365 [3] GEAR-PLANETARY (26-TEETH)  
10. 367-8367 [2] RING-RETAINING  
11. 367-8368 [1] GEAR-SUN (23-TEETH)  
12. 367-8369 [3] GEAR-PLANETARY (25-TEETH)  
13. 378-9513 [3] SHAFT  
14. 378-9514 [1] CARRIER-PLANETARY  
15. 378-9515 [1] GEAR-RING (73-TEETH)  
16. 378-9516 [1] HOUSING  
17. 378-9609 [1] CARRIER AS  
18. 451-2182 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
19. 453-3447 M [6] BOLT (M12X1.75X40-MM)  
20. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
21. 509-6676 [3] PIN-SPRING  
22. 095-1022 [1] BEARING-ROLLER  
23. 148-4642 [1] SEAL-O-RING  
24. 148-4643 [1] BEARING  
25. 296-6268 [6] BEARING AS-ROLLER  
26. 346-5215 [3] BEARING AS  
27. 3K-0360 [1] SEAL-O-RING  
28. 7I-7623 [1] SPACER (52X69.5X6-MM THK)  
29. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
30. 8T-0348 M [16] BOLT-SOCKET HEAD (M16X2X50-MM)  
31. 8T-4240 [3] RING-RETAINING  
32. 9X-8268 [16] WASHER (17.5X30X3.5-MM THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#M00860670376
 

464-8726: DRIVE GP-SWING

464-8726 DRIVE GP-SWING -WITH MOTOR
S/N MFY1-UP
PART OF 333-2965 DRIVE & MTG GP-SWING
i06584343 M0086067
4648726 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 323F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
2. 114-1399 [1] PIPE-GAUGE  
3. 227-6221 [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  227-6215 [1] BOSS (1/4-18-THD)  
  267-6785 [1] PIPE  
4. 378-9517 Y [1] DRIVE GP-SWING (WITHOUT MOTOR)  
5. 467-1393 Y [1] MOTOR & MTG GP-SWING  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#M00860670377
 

158-8987: FILTER & VALVE GP-PILOT

158-8987 FILTER & VALVE GP-PILOT -HYDRAULIC OIL
S/N MFY1-UP
PART OF 417-2293 TANK & FILTER GP-HYDRAULIC
i01256862 M0086067
1588987 FILTER & VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 323F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-8670 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, PILOT)  
2. 215-4909 [1] VALVE GP-PILOT RELIEF (HYDRAULIC FILTER)  
2A. 095-1584 [1] SEAL-O-RING  
2B. 095-1590 [1] SEAL-O-RING  
2C. 095-1596 [1] SEAL-O-RING  
 

#M00860670378
 

188-4145: FILTER GP-OIL

188-4145 FILTER GP-OIL -HYDRAULIC RETURN
S/N MFY1-UP
PART OF 417-2293 TANK & FILTER GP-HYDRAULIC
i06194789 M0086067
1884145 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 323F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-2620 Y [1] HOUSING GP-FILTER  
2. 177-2617 Y [1] BLOCK GP-HYDRAULIC  
3. 177-2625 [1] PACKING  
4. 095-1682 [1] SEAL-O-RING  
5. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
6. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
7. 419-8528 CY [1] FILTER GP-OIL (HYDRAULIC RETURN)  
8. 173-3510 [1] COVER  
9. 123-2003 [1] SEAL-O-RING  
10. 8T-4184 M [4] BOLT (M12X1.75X45-MM)  
11. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 175-6178 [1] HOUSING  
13. 177-2623 [1] VALVE AS (BYPASS)  
14. 175-6174 [1] PIPE  
15. 8T-4970 M [2] BOLT (M6X1X14-MM)  
16. 175-6176 [1] SEAL-O-RING  
17. 6V-8932 M [1] SETSCREW-SOCKET (M6X1X10-MM)  
18. 095-1663 [2] SEAL-O-RING  
19. 187-7171 [2] BOLT (M8X1.25X14-MM)  
20. 175-6175 [1] PIPE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00860670379
 

289-8194: FILTER GP-OIL

289-8194 FILTER GP-OIL -HYDRAULIC, CASE DRAIN
S/N MFY1-UP
PART OF 417-2293 TANK & FILTER GP-HYDRAULIC
i02612632 M0086067
2898194 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 323F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-7521 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, CASE DRAIN)  
2. 289-8195 [1] HEAD AS-FILTER  
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE POSITION SENSING BUCKET CYLINDER ON CERTAIN 320E, 323E/F, 325F, 336D/E/F, 345D, 349D/D2, 349E/F, AND 352F EXCAVATORS, EQUIPPED WITH CAT GRADE CONTROL APPLICATION
PRODUCT SUPPORT PROGRAM FOR REPLACING THE POSITION SENSING BUCKET CYLINDER ON CERTAIN 320E, 323E/F, 325F, 336D/E/F, 345D, 349D/D2, 349E/F, AND 352F EXCAVATORS, EQUIPPED WITH CAT GRADE CONTROL APPLICATION
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Boom Cylinder
323F LN Excavator Machine Systems Specifications
Boom Cylinder
323F LN Excavator Machine Systems Specifications
Boom Cylinder Lines
323F LN Excavator Machine Systems Specifications
Boom Lines
323F LN Excavator Machine Systems Specifications
Stick Cylinder
323F LN Excavator Machine Systems Specifications
Bucket Cylinder
323F LN Excavator Machine Systems Specifications
Bucket Cylinder
323F LN Excavator Machine Systems Specifications
Boom Cylinder Lines
323F LN Excavator Machine Systems Specifications
Boom Lines
323F LN Excavator Machine Systems Specifications
Boom Lines
323F LN Excavator Machine Systems Specifications
Boom Lines
323F LN Excavator Machine Systems Specifications
Boom Lines
323F LN Excavator Machine Systems Specifications
Boom Lines
323F LN Excavator Machine Systems Specifications
Boom Cylinder Lines
323F LN Excavator Machine Systems Specifications
Boom Cylinder
323F LN Excavator Machine Systems Specifications
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE POSITION SENSING BUCKET CYLINDER ON CERTAIN 320E, 323E/F, 325F, 336D/E/F, 345D, 349D/D2, 349E/F, AND 352F EXCAVATORS, EQUIPPED WITH CAT GRADE CONTROL APPLICATION
PRODUCT SUPPORT PROGRAM FOR REPLACING THE POSITION SENSING BUCKET CYLINDER ON CERTAIN 320E, 323E/F, 325F, 336D/E/F, 345D, 349D/D2, 349E/F, AND 352F EXCAVATORS, EQUIPPED WITH CAT GRADE CONTROL APPLICATION
Service Letter-Asia
Systems Operation
Boom Cylinder
323F LN Excavator Machine Systems
Stick Cylinder
323F LN Excavator Machine Systems
Bucket Cylinder
323F LN Excavator Machine Systems
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE POSITION SENSING BUCKET CYLINDER ON CERTAIN 320E, 323E/F, 325F, 336D/E/F, 345D, 349D/D2, 349E/F, AND 352F EXCAVATORS, EQUIPPED WITH CAT GRADE CONTROL APPLICATION
PRODUCT SUPPORT PROGRAM FOR REPLACING THE POSITION SENSING BUCKET CYLINDER ON CERTAIN 320E, 323E/F, 325F, 336D/E/F, 345D, 349D/D2, 349E/F, AND 352F EXCAVATORS, EQUIPPED WITH CAT GRADE CONTROL APPLICATION
Testing and Adjusting
Cylinder Speed - Check
323F LN Excavator Machine Systems
Cylinder Drift - Check - Loaded Bucket
323F LN Excavator Machine Systems
Cylinder Drift - Check - Empty Bucket
323F LN Excavator Machine Systems
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Load Control Valve (Stick Cylinder) - Remove and Install
320F, 323F Excavators Machine Systems
Stick Cylinder - Remove and Install
320F, 323F Excavators Machine Systems
Boom Cylinder - Remove and Install
320F, 323F Excavators Machine Systems
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A New Position Sensing Bucket Cylinder Is Now Available for Certain 320E, 323E, 323F, 325F, and 336D/E/F Excavators {5457}
A New Position Sensing Bucket Cylinder Is Now Available for Certain 320E, 323E, 323F, 325F, and 336D/E/F Excavators {5457}

Caterpillar Parts SIS Catalog 323F :

CYLINDER GP-BUCKET
469-9342 CYLINDER GP-BUCKET
341-2791 CYLINDER AR-BOOM
CYLINDER & SEAL GP-STICK
341-2802 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-HYDRAULIC
279-8709 CYLINDER & SEAL GP-HYDRAULIC
CYLINDER & SEAL GP-BUCKET
356-8787 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BUCKET
341-2814 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BOOM
341-2790 CYLINDER & SEAL GP-BOOM
352-0193 CYLINDER & LINES GP-STICK
CYLINDER GP-BUCKET
575-1074 CYLINDER GP-BUCKET
CYLINDER GP-COUPLER
390-9505 CYLINDER GP-COUPLER
CYLINDER GP-HYDRAULIC
360-5447 CYLINDER GP-HYDRAULIC
DRIVE & MTG GP-SWING
333-2965 DRIVE & MTG GP-SWING
DRIVE GP-SWING
378-9517 DRIVE GP-SWING
DRIVE GP-SWING
464-8726 DRIVE GP-SWING
FILTER & VALVE GP-PILOT
158-8987 FILTER & VALVE GP-PILOT
FILTER GP-OIL
188-4145 FILTER GP-OIL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.