WORK TOOLS
RIPPER GPPIN GP
RIPPER GP
WORK TOOLS
RIPPER GP
#M00864770560
132-4716: PROTECTOR
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#M00864770561
380-1214: PROTECTOR GP-SHANK
380-1214 PROTECTOR GP-SHANK
S/N HWH1-UP
PART OF 445-2034 TOOTH GP-RIPPER
FOR USE WITH CR450 RIPPER
AN ATTACHMENT
S/N HWH1-UP
PART OF 445-2034 TOOTH GP-RIPPER
FOR USE WITH CR450 RIPPER
AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS#M00864770562
216-0124: PULLER AR-PIN
216-0124 PULLER AR-PIN
S/N HWH1-UP
PART OF 363-4429 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
S/N HWH1-UP
PART OF 363-4429 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS#M00864770563
135-5111: PULLER GP-PIN
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-4501 | [1] | PIN | |
| 2. | 7T-4502 | [1] | PIN | |
| 3. | 9X-8257 | [8] | WASHER (17.5X30X3.5-MM THK) | |
| 4. | 130-6366 | [2] | LINK | |
| 5. | 135-5102 | [1] | PLATE AS | |
| 6. | 135-5105 | [1] | PLATE AS | |
| 7. | 135-5109 | [1] | PIN | |
| 8. | 135-5113 | [2] | PIN | |
| 9. | 135-5114 | [1] | PIN | |
| 10. | 7X-3391 | [4] | WASHER-HARD (13.5X32X6-MM THK) | |
| 11. | 6K-3630 | [1] | RING | |
| 12. | 7J-4169 | [2] | RING-SNAP | |
| 13. | 7X-0537 | [1] | WASHER-HARD (40.5X67X6-MM THK) | |
| 14. | 8C-8992 M | [4] | BOLT-LOCKING (M12X1.75X30-MM) | |
| 15. | 8T-4167 | [2] | WASHER-HARD (26X44X4-MM THK) | |
| 16. | 8T-7338 M | [8] | BOLT (M16X2X45-MM) | |
| 17. | 9U-9622 | [1] | LEVER | |
| M | METRIC PART | |||
#M00864770564
384-6757: RIPPER AR
384-6757 RIPPER AR -SINGLE SHANK
S/N HWH1-UP
PART OF 363-4428, 363-4429 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
S/N HWH1-UP
PART OF 363-4428, 363-4429 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 521-8390 CY | [2] | CYLINDER GP-RIPPER (RAISE, LOWER) | |
| 2. | 521-8391 CY | [2] | CYLINDER GP-RIPPER (TILT) | |
| 3. | 134-0825 | [1] | CARRIAGE AS | |
| 5P-1327 | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 4. | 135-2803 Y | [1] | FRAME GP-RIPPER | |
| 5. | 135-6410 Y | [1] | LINES GP-RIPPER | |
| 6. | 137-7157 Y | [1] | MOUNTING GP-RIPPER | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00864770565
384-6758: RIPPER AR
384-6758 RIPPER AR -MULTISHANK
S/N HWH1-UP
PART OF 363-4430 RIPPER AR-MULTISHANK
AN ATTACHMENT
S/N HWH1-UP
PART OF 363-4430 RIPPER AR-MULTISHANK
AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 521-8390 CY | [2] | CYLINDER GP-RIPPER (RAISE, LOWER) | |
| 2. | 521-8391 CY | [2] | CYLINDER GP-RIPPER (TILT) | |
| 3. | 135-6410 Y | [1] | LINES GP-RIPPER | |
| 4. | 137-7157 Y | [1] | MOUNTING GP-RIPPER | |
| 5. | 138-0431 | [1] | BEAM AS | |
| 5P-1327 | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 6. | Y | [1] | FRAME GP-RIPPER | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00864770566
363-4430: RIPPER AR-MULTISHANK
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8E-7886 Y | [1] | LIGHTING GP-FLOOD | ||
| 207-4455 Y | [1] | LINES GP-RIPPER | ||
| 374-8317 Y | [1] | LINKAGE GP-IMPLEMENT | ||
| Y | [1] | RIPPER AR (MULTISHANK) | ||
| 187-8636 Y | [1] | VALVE GP-BANK 4 (BULLDOZER, RIPPER) | ||
| 143-4991 | [1] | COVER AS | ||
| 1F-0750 | [10] | NUT-WELD (3/8-16-THD) | ||
| 197-5108 | [1] | FILM-INSTRUCTION (RIPPER CONTROL) | ||
| (ON RH CONSOLE TOP COVER PLATE NEXT TO RIPPER CONTROL) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00864770567
382-7676: RIPPER AR-MULTISHANK
382-7676 RIPPER AR-MULTISHANK
S/N NSM1-UP
STEEL MILL
FOR USE WITH STEEL MILL LUBRICANT GP, STEEL MILL UNDERCARRIAGE AR, STEEL MILL CAB AR
AN ATTACHMENT
S/N NSM1-UP
STEEL MILL
FOR USE WITH STEEL MILL LUBRICANT GP, STEEL MILL UNDERCARRIAGE AR, STEEL MILL CAB AR
AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8E-7886 Y | [1] | LIGHTING GP-FLOOD | ||
| 207-4455 Y | [1] | LINES GP-RIPPER | ||
| 374-8317 Y | [1] | LINKAGE GP-IMPLEMENT | ||
| 384-6495 Y | [1] | RIPPER AR-MULTISHANK | ||
| 187-8636 Y | [1] | VALVE GP-BANK 4 (BULLDOZER, RIPPER) | ||
| 143-4991 | [1] | COVER AS | ||
| 1F-0750 | [10] | NUT-WELD (3/8-16-THD) | ||
| 197-5108 | [1] | FILM-INSTRUCTION (RIPPER CONTROL) | ||
| (ON RH CONSOLE TOP COVER PLATE NEXT TO RIPPER CONTROL) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00864770568
384-6495: RIPPER AR-MULTISHANK
384-6495 RIPPER AR-MULTISHANK
S/N NSM1-UP
PART OF 382-7676 RIPPER AR-MULTISHANK
AN ATTACHMENT
S/N NSM1-UP
PART OF 382-7676 RIPPER AR-MULTISHANK
AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 132-5123 Y | [2] | CYLINDER GP-RIPPER (RAISE, LOWER) | |
| 2. | 137-7157 Y | [1] | MOUNTING GP-RIPPER | |
| 3. | 138-0431 | [1] | BEAM AS | |
| 3A. | 5P-1327 | [1] | PLATE-SERIAL NUMBER (RIPPER) | |
| 3B. | 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 4. | Y | [1] | FRAME GP-RIPPER | |
| 5. | 335-5188 | [2] | LINK AS | |
| (EACH INCLUDES) | ||||
| 5A. | 3G-5999 | [2] | BUSHING | |
| 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | ||
| 6. | 335-5210 Y | [1] | LINES GP-RIPPER | |
| Y | SEPARATE ILLUSTRATION | |||
#M00864770569
363-4428: RIPPER AR-SINGLE SHANK
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8E-7886 Y | [1] | LIGHTING GP-FLOOD | ||
| 207-4455 Y | [1] | LINES GP-RIPPER | ||
| 374-8317 Y | [1] | LINKAGE GP-IMPLEMENT | ||
| Y | [1] | RIPPER AR (SINGLE SHANK) | ||
| 187-8636 Y | [1] | VALVE GP-BANK 4 (BULLDOZER, RIPPER) | ||
| 143-4991 | [1] | COVER AS | ||
| 1F-0750 | [10] | NUT-WELD (3/8-16-THD) | ||
| 197-5108 | [1] | FILM-INSTRUCTION (RIPPER CONTROL) | ||
| (ON RH CONSOLE TOP COVER PLATE NEXT TO RIPPER CONTROL) | ||||
| 6J-6703 | [1] | PIN | ||
| 4T-2479 | [2] | PIN AS | ||
| Y | SEPARATE ILLUSTRATION | |||
