HYDRAULIC SYSTEM
CYLINDER GPHYDRAULIC SYSTEM
CYLINDER GP#M00865010270
433-6593: CYLINDER & MTG GP-TOW POINT
433-6593 CYLINDER & MTG GP-TOW POINT
S/N AC61-UP
57.1-MM (2.2-IN) BORE X 350-MM (13.7-IN) STROKE
PART OF 433-6585 CYLINDER & MTG GP-HYDRAULIC
AN ATTACHMENT
S/N AC61-UP
57.1-MM (2.2-IN) BORE X 350-MM (13.7-IN) STROKE
PART OF 433-6585 CYLINDER & MTG GP-HYDRAULIC
AN ATTACHMENT
Parts for your AP655F L ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 353-5791 | [2] | HARNESS AS-WIRING | |
| (EACH INCLUDES) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLDUES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 2. | 396-7147 | [2] | CYLINDER GP-HYDRAULIC | |
| (EACH INCLUDES) | ||||
| 7R-8443 | [2] | PLUG-NYLON | ||
| 443-5230 | [1] | KIT-SEAL | ||
| (INCLUDES WEAR RINGS, WIPER SEAL, O-RING SEALS, BACK-UP SEAL & U-CUP SEAL) | ||||
| 3. | 148-8378 | [4] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8724 | [1] | ELBOW | ||
| 4. | 173-3651 | [2] | PIN-CLEVIS | |
| 5. | 253-8675 | [2] | PIN-CLEVIS | |
| 6. | 3B-4629 | [4] | PIN-COTTER | |
| 7. | 8T-4167 | [2] | WASHER-HARD (26X44X4-MM THK) | |
#M00865010271
396-7144: CYLINDER GP-HYDRAULIC
396-7144 CYLINDER GP-HYDRAULIC
S/N AC61-UP
57.2-MM (2.3-IN) BORE X 350-MM (13.8-IN) STROKE
PART OF 516-2832 CYLINDER GP-HYDRAULIC
AN ATTACHMENT
S/N AC61-UP
57.2-MM (2.3-IN) BORE X 350-MM (13.8-IN) STROKE
PART OF 516-2832 CYLINDER GP-HYDRAULIC
AN ATTACHMENT
Parts for your AP655F L ASPHALT PAVER:
CATERPILLAR SIS#M00865010272
433-6584: CYLINDER GP-HYDRAULIC
433-6584 CYLINDER GP-HYDRAULIC
S/N AC61-UP
PART OF 433-7564, 433-7566 CONFIGURATION AR
AN ATTACHMENT
S/N AC61-UP
PART OF 433-7564, 433-7566 CONFIGURATION AR
AN ATTACHMENT
Parts for your AP655F L ASPHALT PAVER:
CATERPILLAR SIS#M00865010273
433-7592: CYLINDER GP-HYDRAULIC
433-7592 CYLINDER GP-HYDRAULIC -LH
S/N AC61-UP
82.5-MM (3.3-IN) BORE X 215.9-MM (8.5-IN) STROKE
PART OF 487-4840 CYLINDER GP-HYDRAULIC
AN ATTACHMENT
S/N AC61-UP
82.5-MM (3.3-IN) BORE X 215.9-MM (8.5-IN) STROKE
PART OF 487-4840 CYLINDER GP-HYDRAULIC
AN ATTACHMENT
Parts for your AP655F L ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2K-7471 | [1] | LOCKNUT (1-14-THD) | |
| 2. | 232-6422 | [1] | SPRING | |
| 3. | 232-6419 | [1] | WIRE-LOCK | |
| 4. | 005-8639 | [1] | BEARING-ALIGNING | |
| 5. | 232-6420 | [1] | PLUG AS | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 6. | 232-6423 | [1] | BALL | |
| AVAILABLE REPAIR KIT(S): | ||||
| 232-6418 | [1] | KIT-SEAL | ||
| (INCLUDES WIPER SEAL, U-CUP SEAL, O-RING SEALS, BACKUP SEAL, CAP SEAL, WEAR RING & PARTS MARKED "J" IN THE GRAPHIC) | ||||
#M00865010274
433-7593: CYLINDER GP-HYDRAULIC
433-7593 CYLINDER GP-HYDRAULIC -RH
S/N AC61-UP
76.2-MM (3-IN) BORE X 215.9-MM (8.5-IN) STROKE
PART OF 487-4841 CYLINDER GP-HYDRAULIC
FIELD REPLACEMENT ORDER @@@@@487-4841@@@@@
AN ATTACHMENT
S/N AC61-UP
76.2-MM (3-IN) BORE X 215.9-MM (8.5-IN) STROKE
PART OF 487-4841 CYLINDER GP-HYDRAULIC
FIELD REPLACEMENT ORDER @@@@@487-4841@@@@@
AN ATTACHMENT
Parts for your AP655F L ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2K-7471 | [1] | LOCKNUT (1-14-THD) | |
| 2. | 232-6422 | [1] | SPRING | |
| 3. | 5E-8580 | [1] | RING-RETAINING | |
| 4. | 005-8639 | [1] | BEARING-ALIGNING | |
| 5. | 232-6420 | [1] | PLUG AS (HYDRAULIC CYLINDER) | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 232-6421 | [1] | KIT-SEAL (HYDRAULIC CYLINDER) | ||
| (INCLUDES WIPER SEAL, U-CUP SEAL, O-RING SEALS, BACKUP SEAL, CAP SEAL, WEAR RING & PARTS MARKED "J" IN THE GRAPHIC) | ||||
#M00865010275
433-7594: CYLINDER GP-HYDRAULIC
433-7594 CYLINDER GP-HYDRAULIC -RH
S/N AC61-UP
76.2-MM (3-IN) BORE X 215.9-MM (8.5-IN) STROKE
PART OF 433-6595 CYLINDER & MTG GP-AUGER
AN ATTACHMENT
S/N AC61-UP
76.2-MM (3-IN) BORE X 215.9-MM (8.5-IN) STROKE
PART OF 433-6595 CYLINDER & MTG GP-AUGER
AN ATTACHMENT
Parts for your AP655F L ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6L-7138 | [4] | SCREW (8-32X0.31-IN) | |
| 2. | 232-6420 | [1] | PLUG AS | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 3. | 232-6422 | [1] | SPRING | |
| 4. | 7R-8443 | [2] | PLUG-NYLON | |
| 5. | 005-8639 | [1] | BEARING-ALIGNING | |
| 6. | 378-5551 | [1] | RECEPTACLE AS | |
| 7. | 232-6423 | [1] | BALL | |
| AVAILABLE REPAIR KIT(S): | ||||
| 459-7524 | [1] | KIT-SEAL | ||
| (INCLUDES WIPER SEAL, U-CUP SEAL, O-RING SEALS, BACKUP RING, O-RING, SEAL, WEAR RINGS | ||||
| & ALSO PARTS MARKED "H" IN THE GRAPHIC) | ||||
#M00865010276
487-4840: CYLINDER GP-HYDRAULIC
487-4840 CYLINDER GP-HYDRAULIC
S/N AC61-UP
PART OF 433-6592, 433-6595 CYLINDER & MTG GP-AUGER
AN ATTACHMENT
S/N AC61-UP
PART OF 433-6592, 433-6595 CYLINDER & MTG GP-AUGER
AN ATTACHMENT
Parts for your AP655F L ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 433-7592 Y | [1] | CYLINDER GP-HYDRAULIC | ||
| Y | SEPARATE ILLUSTRATION | |||
#M00865010277
487-4841: CYLINDER GP-HYDRAULIC
487-4841 CYLINDER GP-HYDRAULIC
S/N AC61-UP
PART OF 433-6592 CYLINDER & MTG GP-AUGER
FIELD REPLACEMENT FOR @@@@@433-7593@@@@@
AN ATTACHMENT
S/N AC61-UP
PART OF 433-6592 CYLINDER & MTG GP-AUGER
FIELD REPLACEMENT FOR @@@@@433-7593@@@@@
AN ATTACHMENT
Parts for your AP655F L ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 433-7593 Y | [1] | CYLINDER GP-HYDRAULIC | ||
| Y | SEPARATE ILLUSTRATION | |||
#M00865010278
516-2829: CYLINDER GP-HYDRAULIC
516-2829 CYLINDER GP-HYDRAULIC
S/N AC61-UP
57.2-MM (2.3-IN) BORE X 350-MM (13.8-IN) STROKE
PART OF 516-2832 CYLINDER GP-HYDRAULIC
AN ATTACHMENT
S/N AC61-UP
57.2-MM (2.3-IN) BORE X 350-MM (13.8-IN) STROKE
PART OF 516-2832 CYLINDER GP-HYDRAULIC
AN ATTACHMENT
Parts for your AP655F L ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| AVAILABLE REPAIR KIT(S): | ||||
| 540-6884 | [1] | KIT-SEAL | ||
| (INCLUDES PARTS MARKED 'J' IN THE GRAPHICS) | ||||
#M00865010279
516-2832: CYLINDER GP-HYDRAULIC
516-2832 CYLINDER GP-HYDRAULIC
S/N AC61-UP
PART OF 433-6590 CYLINDER & MTG GP-TOW POINT
AN ATTACHMENT
S/N AC61-UP
PART OF 433-6590 CYLINDER & MTG GP-TOW POINT
AN ATTACHMENT
Parts for your AP655F L ASPHALT PAVER:
CATERPILLAR SISInformation:
HYDRAULIC SYSTEM
CYLINDER GP
Operation and Maintenance Manual
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE APRON LIFT CYLINDERS ON CERTAIN AP500F, AP555F, AP600F, AP655F, AP1000F, AND AP1055F ASPHALT PAVERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE APRON LIFT CYLINDERS ON CERTAIN AP500F, AP555F, AP600F, AP655F, AP1000F, AND AP1055F ASPHALT PAVERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE APRON LIFT CYLINDERS ON CERTAIN AP500F, AP555F, AP600F, AP655F, AP1000F, AND AP1055F ASPHALT PAVERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE APRON LIFT CYLINDERS ON CERTAIN AP500F, AP555F, AP600F, AP655F, AP1000F, AND AP1055F ASPHALT PAVERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE APRON LIFT CYLINDERS ON CERTAIN AP500F, AP555F, AP600F, AP655F, AP1000F, AND AP1055F ASPHALT PAVERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE APRON LIFT CYLINDERS ON CERTAIN AP500F, AP555F, AP600F, AP655F, AP1000F, AND AP1055F ASPHALT PAVERS
Service Letter-Asia
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE APRON LIFT CYLINDERS ON CERTAIN AP500F, AP555F, AP600F, AP655F, AP1000F, AND AP1055F ASPHALT PAVERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE APRON LIFT CYLINDERS ON CERTAIN AP500F, AP555F, AP600F, AP655F, AP1000F, AND AP1055F ASPHALT PAVERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE APRON LIFT CYLINDERS ON CERTAIN AP500F, AP555F, AP600F, AP655F, AP1000F, AND AP1055F ASPHALT PAVERS
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Disassembly and Assembly
Hydraulic Cylinder (Auger Hoist) - Remove and Install
AP655F and AP655F L Asphalt Paver Machine Systems
AP655F and AP655F L Asphalt Paver Machine Systems
Hydraulic Cylinder (Hopper Hoist) - Remove and Install
AP655F and AP655F L Asphalt Paver Machine Systems
AP655F and AP655F L Asphalt Paver Machine Systems
Hydraulic Cylinder (Screed Hoist) - Remove and Install
AP655F and AP655F L Asphalt Paver Machine Systems
AP655F and AP655F L Asphalt Paver Machine Systems
Hydraulic Cylinder (Tow Point) - Remove and Install
AP655F and AP655F L Asphalt Paver Machine Systems
AP655F and AP655F L Asphalt Paver Machine Systems
Hydraulic Cylinder (Track Tensioner) - Remove and Install
AP655F and AP655F L Asphalt Paver Machine Systems
AP655F and AP655F L Asphalt Paver Machine Systems
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Larger Front Apron Cylinders are Now Used on Certain Asphalt Pavers {5102, 7562}
Larger Front Apron Cylinders are Now Used on Certain Asphalt Pavers {5102, 7562}
Larger Front Apron Cylinders are Now Used on Certain Asphalt Pavers {5102, 7562}