MACHINE ARRANGEMENT
SCREED ARIMPLEMENTS
EXTENSION GPVIBRATORY SYSTEM
VIBRATORY GPMACHINE ARRANGEMENT
SCREED ARMACHINE ARRANGEMENT
SCREED AR
#M00865090170
538-9094: BAR GP-TAMPER
For full view, you need register
Parts for your SE50 VT ASPHALT SCREED:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4193 M | [16] | BOLT (M16X2X50-MM) | |
| 2. | 6V-8454 M | [16] | SCREW-HEX SOCKET (M8X1.25X16-MM) | |
| 3. | 529-7400 | [1] | BAR-TAMPER (EXTENDER, LH) | |
| 4. | 529-7401 | [1] | BAR-TAMPER (EXTENDER, RH) | |
| 5. | 529-7402 | [1] | BAR-TAMPER (MAIN, LH) | |
| 6. | 529-7403 | [1] | BAR-TAMPER (MAIN, RH) | |
| 7. | 529-7412 | [2] | PLATE-WEAR (EXTENDER) | |
| 8. | 529-7415 | [1] | PLATE-WEAR (MAIN, LH) | |
| 9. | 529-7416 | [1] | PLATE-WEAR (MAIN, RH) | |
| 10. | 532-8853 | [22] | CLAMP | |
| 11. | 7X-0515 | [16] | WASHER-HARD (17X35X5-MM THK) | |
| 12. | 8T-4138 M | [22] | BOLT (M6X1X20-MM) | |
| 13. | 8T-5089 | [12] | PIN-SPRING | |
| 14. | 9X-8256 | [22] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#M00865090171
575-3716: BAR GP-TAMPER
575-3716 BAR GP-TAMPER
FIELD INSTALLATION
FIELD INSTALLATION
For full view, you need register
Parts for your SE50 VT ASPHALT SCREED:
CATERPILLAR SIS#M00865090172
575-3718: BAR GP-TAMPER
For full view, you need register
Parts for your SE50 VT ASPHALT SCREED:
CATERPILLAR SIS#M00865090173
575-3719: BAR GP-TAMPER
575-3719 BAR GP-TAMPER
FIELD INSTALLATION
FIELD INSTALLATION
For full view, you need register
Parts for your SE50 VT ASPHALT SCREED:
CATERPILLAR SIS#M00865090174
390-4950: EXTENSION GP-SCREED
For full view, you need register
Parts for your SE50 VT ASPHALT SCREED:
CATERPILLAR SIS#M00865090175
438-1848: EXTENSION GP-SCREED
For full view, you need register
Parts for your SE50 VT ASPHALT SCREED:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 438-1652 Y | [1] | CYL & MTG GP-SCREED EXTENSION | |
| 2. | 441-9880 Y | [1] | WIRING GP-SENSOR | |
| 3. | 450-0989 | [2] | SENSOR GP-POSITION (SCREED EXTENSION, RH, LH) | |
| 3A. | 450-0989 | [1] | SENSOR GP-POSITION (CROWN) | |
| 4. | 450-0990 | [2] | SENSOR GP-POSITION (ANGLE OF ATTACK, RH, LH) | |
| 5. | 477-3224 C | [1] | PLATE AS | |
| 6. | 477-3225 C | [1] | PLATE AS | |
| 7. | 451-9230 | [2] | PLATE AS | |
| (EACH PLATE AS INCLUDES) | ||||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 8. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 9. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 11. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 12. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 13. | 9X-2038 | [1] | WASHER (7X19X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00865090176
285-9947: HOUSING GP-ECCENTRIC WEIGHT
285-9947 HOUSING GP-ECCENTRIC WEIGHT
PART OF 472-4892 VIBRATORY GP
PART OF 472-4892 VIBRATORY GP
For full view, you need register
Parts for your SE50 VT ASPHALT SCREED:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-0406 | [5] | SEAL-BONDED | |
| 2. | 527-1368 | [1] | BREATHER (ECCENTRIC WEIGHT HOUSING) | |
| 3. | 242-2884 | [1] | COVER | |
| 4. | 260-9146 | [5] | PLUG | |
| 5. | 437-8597 | [1] | HOUSING | |
| 6. | 527-1370 | [1] | SHAFT AS | |
| 7. | 095-0941 | [1] | RING-RETAINING | |
| 8. | 095-0924 | [2] | RING-RETAINING | |
| 9. | 4L-9825 | [2] | BALL BEARING | |
| 10. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 11. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#M00865090177
471-7064: HOUSING GP-ECCENTRIC WEIGHT
471-7064 HOUSING GP-ECCENTRIC WEIGHT
PART OF 488-8984 TAMPER GP-SCREED, 472-4892 VIBRATORY GP
PART OF 488-8984 TAMPER GP-SCREED, 472-4892 VIBRATORY GP
For full view, you need register
Parts for your SE50 VT ASPHALT SCREED:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 527-1368 | [1] | BREATHER (ECCENTRIC WEIGHT HOUSING) | |
| 2. | 242-2812 | [1] | SEAL-SHAFT | |
| 3. | 242-2882 | [1] | COVER | |
| 4. | 260-9146 | [5] | PLUG | |
| 5. | 437-8597 | [1] | HOUSING | |
| 6. | 471-7051 | [1] | SHAFT AS | |
| 7. | 095-0941 | [1] | RING-RETAINING | |
| 8. | 4L-9825 | [2] | BALL BEARING | |
| 9. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 10. | 6V-0406 | [5] | SEAL-BONDED | |
| 11. | 8T-4240 | [2] | RING-RETAINING | |
| 12. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#M00865090178
471-7065: HOUSING GP-ECCENTRIC WEIGHT
471-7065 HOUSING GP-ECCENTRIC WEIGHT
S/N E991-UP
PART OF 489-9255, 489-9256 TAMPER GP-SCREED
S/N E991-UP
PART OF 489-9255, 489-9256 TAMPER GP-SCREED
For full view, you need register
Parts for your SE50 VT ASPHALT SCREED:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 527-1368 | [1] | BREATHER (ECCENTRIC WEIGHT HOUSING) | |
| 2. | 242-2812 | [2] | SEAL-SHAFT | |
| 3. | 242-2882 | [1] | COVER | |
| 4. | 260-9146 | [5] | PLUG | |
| 5. | 526-1592 | [1] | HOUSING | |
| 6. | 265-6612 | [1] | COVER | |
| 7. | 475-6921 | [1] | SHAFT AS | |
| 8. | 095-0941 | [1] | RING-RETAINING (INTERNAL) | |
| 9. | 4L-9825 | [2] | BALL BEARING | |
| 10. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 11. | 6V-0406 | [5] | SEAL-BONDED | |
| 12. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 13. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 8T-4240 | [2] | RING-RETAINING (EXTERNAL) | |
| 15. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#M00865090179
488-3849: KIT-SCREED
For full view, you need register
Parts for your SE50 VT ASPHALT SCREED:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 479-1837 | [1] | BAR-TAMPER | ||
| 479-1838 | [1] | BAR-TAMPER | ||
| 479-1839 | [1] | BAR-TAMPER | ||
| 479-1840 | [1] | BAR-TAMPER | ||
| 481-8741 | [2] | BLADE | ||
| 8T-4137 M | [52] | BOLT (M10X1.5X20-MM) | ||
| 8T-4182 M | [4] | BOLT (M10X1.5X45-MM) | ||
| 8T-4189 M | [20] | BOLT (M8X1.25X20-MM) | ||
| 8T-4193 M | [16] | BOLT (M16X2X50-MM) | ||
| 8T-4195 M | [43] | BOLT (M10X1.5X30-MM) | ||
| 8T-4196 M | [4] | BOLT (M10X1.5X35-MM) | ||
| 272-2351 M | [20] | BOLT (M10X1.5X80-MM) | ||
| 476-8641 | [52] | CLAMP | ||
| 415-8166 | [1] | COVER | ||
| 459-9392 | [1] | COVER AS | ||
| 8T-3490 M | [3] | NUT-WELD (M10X1.5-THD) | ||
| 459-9394 | [1] | COVER AS | ||
| 392-9145 | [1] | DEFLECTOR AS (LH) | ||
| 8T-3490 M | [7] | NUT-WELD (M10X1.5-THD) | ||
| 392-9146 | [1] | DEFLECTOR AS (RH) | ||
| 8T-3490 M | [7] | NUT-WELD (M10X1.5-THD) | ||
| 477-1246 | [1] | DEFLECTOR AS (LH) | ||
| 8T-3490 M | [12] | NUT-WELD (M10X1.5-THD) | ||
| 112-9073 M | [4] | STUD-WELD (M12X1.75X21.1-MM) | ||
| 477-1247 | [1] | DEFLECTOR AS (RH) | ||
| 8T-3490 M | [12] | NUT-WELD (M10X1.5-THD) | ||
| 112-9073 M | [4] | STUD-WELD (M12X1.75X21.1-MM) | ||
| 399-9009 | [4] | HEATER AS-SCREED (675-VOLT, 1327-WATT) | ||
| (EACH INCLUDES) | ||||
| 418-6712 | [1] | PLUG AS-CONNECTOR | ||
| 399-9011 | [1] | HEATER AS-SCREED (675-VOLT, 2867-WATT) | ||
| 418-6708 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 399-9012 | [1] | HEATER AS-SCREED (675-VOLT, 2867-WATT) | ||
| 418-6708 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 399-9030 | [1] | HEATER AS-SCREED (675-VOLT, 2867-WATT) | ||
| 418-6708 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 399-9031 | [1] | HEATER AS-SCREED (675-VOLT, 2867-WATT) | ||
| 418-6708 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 457-5742 | [1] | HEATER AS-SCREED (675-VOLT, 5353-WATT) | ||
| 418-6704 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 457-5743 | [1] | HEATER AS-SCREED (675-VOLT, 5353-WATT) | ||
| 418-6704 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 457-5744 | [1] | HEATER AS-SCREED (675-VOLT, 5353-WATT) | ||
| 418-6704 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 457-5745 | [1] | HEATER AS-SCREED (675-VOLT, 5353-WATT) | ||
| 418-6704 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 6V-7687 M | [18] | LOCKNUT (M12X1.75-THD) | ||
| 129-3180 M | [6] | LOCKNUT (M12X1.75-THD) | ||
| 329-3356 M | [55] | NUT (M12X1.75-THD) | ||
| 344-5675 M | [20] | NUT (M10X1.5-THD) | ||
| 8T-5089 | [16] | PIN-SPRING | ||
| 415-8167 | [1] | PLATE | ||
| 415-8168 | [1] | PLATE | ||
| 432-1676 | [2] | PLATE | ||
| 486-4558 | [1] | PLATE | ||
| 418-1391 | [4] | PLATE AS-CLAMP | ||
| (EACH INCLUDES) | ||||
| 9X-8268 | [9] | WASHER (17.5X30X3.5-MM THK) | ||
| 393-0409 | [1] | PLATE GP-SCREED (EXTENDER, LH) | ||
| 393-0410 | [1] | PLATE GP-SCREED (EXTENDER, RH) | ||
| 472-4656 | [1] | PLATE GP-SCREED (MAIN) | ||
| 393-0063 | [2] | PLATE-WEAR | ||
| 472-7043 | [1] | PLATE-WEAR | ||
| 472-7044 | [1] | PLATE-WEAR | ||
| 470-3841 | [18] | SHAFT | ||
| 468-7390 | [18] | SPRING | ||
| 7X-7729 | [19] | WASHER (11X25X3-MM THK) | ||
| 039-8557 | [6] | WASHER (13X26X6-MM THK) | ||
| 115-6433 | [4] | WASHER (11X50X6-MM THK) | ||
| 5P-1076 | [48] | WASHER-HARD (13.5X30X4-MM THK) | ||
| 7X-0515 | [16] | WASHER-HARD (17X35X5-MM THK) | ||
| 8T-4121 | [52] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 198-4777 | [24] | WASHER-HARD (11X25X10-MM THK) | ||
| 198-4778 | [24] | WASHER-HARD (13.5X30X12-MM THK) | ||
| 8T-4222 | [4] | WASHER-PLATED (11X32X2.5-MM THK) | ||
| M | METRIC PART | |||
Information:
MACHINE ARRANGEMENT
SCREED AR
Operation and Maintenance Manual
Special Instruction
Procedure to Install an Aftermarket Grade Control System on Certain Series F Pavers and Series SE Screeds {1408, 6640, 7000, 7220}
Procedure to Install an Aftermarket Grade Control System on Certain Series F Pavers and Series SE Screeds {1408, 6640, 7000, 7220}
Procedure to Install an Aftermarket Grade Control System on Certain Series F Pavers and Series SE Screeds {1408, 6640, 7000, 7220}
Procedure to Rework the Heater Hold Down for Certain SE50 VT Asphalt Screeds {1408}
Procedure to Rework the Heater Hold Down for Certain SE50 VT Asphalt Screeds {1408}
Procedure to Rework the Heater Hold Down for Certain SE50 VT Asphalt Screeds {1408}
Specifications
Systems Operation
Testing and Adjusting
Disassembly and Assembly
