ELECTRICAL AND STARTING SYSTEM
SENSOR GPWIRING GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
#M00878050330
507-9076: WIRING GP-SENSOR
507-9076 WIRING GP-SENSOR -HYDRAULIC OPERATED BREAK-OUT
S/N DN81-UP
PART OF 503-7557, 520-1634 WRENCH GP-ROD
S/N DN81-UP
PART OF 503-7557, 520-1634 WRENCH GP-ROD
For full view, you need register
Parts for your MD6250 ROTARY DRILL:
CATERPILLAR SIS#M00878050331
507-9080: WIRING GP-SENSOR
507-9080 WIRING GP-SENSOR
S/N DN81-UP
11-M (36.1-FT)
PART OF 503-7558 FRAME GP-CATCH
S/N DN81-UP
11-M (36.1-FT)
PART OF 503-7558 FRAME GP-CATCH
For full view, you need register
Parts for your MD6250 ROTARY DRILL:
CATERPILLAR SIS#M00878050332
507-9081: WIRING GP-SENSOR
507-9081 WIRING GP-SENSOR
S/N DN81-UP
13.6-M (44.6-FT). PIPE CATCHER
PART OF 503-7559 CATCHER GP-PIPE
S/N DN81-UP
13.6-M (44.6-FT). PIPE CATCHER
PART OF 503-7559 CATCHER GP-PIPE
For full view, you need register
Parts for your MD6250 ROTARY DRILL:
CATERPILLAR SIS#M00878050333
507-9082: WIRING GP-SENSOR
507-9082 WIRING GP-SENSOR
S/N DN81-UP
20-FT
PART OF 503-7582, 545-3989 RACK GP-PIPE
S/N DN81-UP
20-FT
PART OF 503-7582, 545-3989 RACK GP-PIPE
For full view, you need register
Parts for your MD6250 ROTARY DRILL:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [2] | STRAP-CABLE | |
| 2. | 493-3085 Y | [1] | SENSOR GP-POSITION (PROXIMITY)(CAROUSEL PARK) | |
| 2A. | 493-3085 Y | [1] | SENSOR GP-POSITION (PROXIMITY)(CAROUSEL LOAD) | |
| 3. | 522-7621 Y | [1] | HARNESS AS-SENSOR (CAROUSEL INDEX LOCK) | |
| 4. | 522-7622 Y | [1] | HARNESS AS-SENSOR (CAROUSEL LOCK) | |
| 5. | 4D-7733 | [1] | CLIP (LOOP) | |
| 6. | 178-3620 | [1] | STRAP-DUAL CLAMP | |
| 7. | 200-6345 | [2] | SADDLE-MOUNTING (DUAL SWIVEL) | |
| 8. | 204-2281 | [4] | STRAP-CABLE | |
| Y | SEPARATE ILLUSTRATION | |||
#M00878050334
507-9083: WIRING GP-SENSOR
507-9083 WIRING GP-SENSOR
S/N DN81-UP
35-FT RACK
PART OF 503-7583, 545-3990 RACK GP-PIPE
S/N DN81-UP
35-FT RACK
PART OF 503-7583, 545-3990 RACK GP-PIPE
For full view, you need register
Parts for your MD6250 ROTARY DRILL:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [2] | STRAP-CABLE | |
| 2. | 493-3085 Y | [1] | SENSOR GP-POSITION (PROXIMITY)(CAROUSEL PARK) | |
| 2A. | 493-3085 Y | [1] | SENSOR GP-POSITION (PROXIMITY)(CAROUSEL LOAD) | |
| 3. | 522-7621 Y | [1] | HARNESS AS-SENSOR (CAROUSEL INDEX LOCK) | |
| 4. | 522-7622 Y | [1] | HARNESS AS-SENSOR (CAROUSEL LOCK) | |
| 5. | 4D-7733 | [1] | CLIP (LOOP) | |
| 6. | 178-3620 | [1] | STRAP-DUAL CLAMP | |
| 7. | 200-6345 | [2] | SADDLE-MOUNTING (DUAL SWIVEL) | |
| 8. | 204-2281 | [4] | STRAP-CABLE | |
| Y | SEPARATE ILLUSTRATION | |||
#M00878050335
507-9087: WIRING GP-SENSOR
507-9087 WIRING GP-SENSOR
S/N DN81-UP
DUST COLLECTOR
PART OF 516-1768 SUPPRESSION GP-DUST
S/N DN81-UP
DUST COLLECTOR
PART OF 516-1768 SUPPRESSION GP-DUST
For full view, you need register
Parts for your MD6250 ROTARY DRILL:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [11] | STRAP-CABLE | |
| 2. | 351-1904 | [1] | SEAL-O-RING | |
| 3. | 358-2398 | [1] | SENSOR GP-SPEED (MOTOR) | |
| 4. | 523-3394 Y | [1] | HARNESS AS-WIRING | |
| 5. | 178-3620 | [1] | STRAP-DUAL CLAMP | |
| 6. | 200-6345 | [5] | SADDLE-MOUNTING (DUAL SWIVEL) | |
| 7. | 6D-4246 | [5] | CLIP (LOOP) | |
| 8. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4136 M | [5] | BOLT (M10X1.5X25-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00878050336
507-9089: WIRING GP-SENSOR
507-9089 WIRING GP-SENSOR -STAIRS
S/N DN81-UP
PART OF 503-7580 LADDER & WALKWAY AR, 516-1629 PLATFORM AR-CAB
S/N DN81-UP
PART OF 503-7580 LADDER & WALKWAY AR, 516-1629 PLATFORM AR-CAB
For full view, you need register
Parts for your MD6250 ROTARY DRILL:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [1] | STRAP-CABLE | |
| 2. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 3. | 284-8381 Y | [1] | SWITCH AS-TOGGLE (ACCESS LIGHTS) | |
| 4. | 289-8427 | [1] | ALARM AS (9.8 TO 32 VOLTS)(LADDER) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-5623 BD | WIRE-ELECTRICAL (16-GA, BLACK) | |||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (31-CM) | |||
| 5. | 308-3527 Y | [1] | SWITCH AS-TOGGLE (ACTUATOR) | |
| 6. | 493-3085 Y | [1] | SENSOR GP-POSITION (PROXIMITY) | |
| 7. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00878050337
507-9109: WIRING GP-SENSOR
For full view, you need register
#M00878050338
347-0634: WIRING GP-UNIT INJECTOR
347-0634 WIRING GP-UNIT INJECTOR
S/N MJ91-UP
PROVIDES A WIRING GROUP TO OPERATE MEUI-C INJECTORS
PART OF 519-6724 ENGINE AR-CORE
S/N MJ91-UP
PROVIDES A WIRING GROUP TO OPERATE MEUI-C INJECTORS
PART OF 519-6724 ENGINE AR-CORE
For full view, you need register
Parts for your MD6250 ROTARY DRILL:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [3] | STRAP-CABLE | |
| 2. | 359-4893 | [2] | RING-RETAINING | |
| 3. | 418-8701 Y | [2] | HARNESS AS-ENGINE | |
| 4. | 362-0802 | [1] | BRACKET AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 5. | 0S-1615 | [2] | BOLT (1/4-20X0.75-IN) | |
| 6. | 166-5396 | [14] | SCREW-WASHER HEAD (1/4-20X0.5-IN) | |
| 7. | 4P-7581 | [1] | CLIP (LADDER) | |
| 8. | 5P-0537 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 9. | 5S-0003 | [1] | NUT (5/16-18-THD) | |
| 10. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| Y | SEPARATE ILLUSTRATION | |||
#M00878050339
507-9073: WIRING GP-VALVE
For full view, you need register
Parts for your MD6250 ROTARY DRILL:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 524-5466 | [1] | PLATE | |
| 2. | 7K-1181 | [46] | STRAP-CABLE | |
| 3. | 320-3065 | [1] | SENSOR GP-PRESSURE (FLUSHING) | |
| 4. | 349-1178 | [1] | SENSOR-PRESSURE (IMPLEMENT PUMP) | |
| 4A. | 349-1178 | [2] | SENSOR-PRESSURE (TRACK, LH) | |
| 4B. | 349-1178 | [2] | SENSOR-PRESSURE (TRACK, RH) | |
| 5. | 382-2001 Y | [1] | SENSOR GP-LIQUID LEVEL (WATER IN FUEL) | |
| 6. | 490-0579 | [1] | ADAPTER AS | |
| 7. | 490-0588 | [1] | NUT | |
| 8. | Y | [1] | HARNESS AS-VALVE | |
| 9. | 132-5789 | [2] | CLIP (LADDER) | |
| 10. | 177-2215 | [3] | STRAP-DUAL CLAMP | |
| 11. | 191-9256 | [1] | CLIP | |
| 12. | 1S-1409 | [4] | CLIP | |
| 13. | 1S-4557 | [1] | CLIP | |
| 14. | 200-6345 | [6] | SADDLE-MOUNTING (DUAL SWIVEL) | |
| 15. | 267-8828 | [1] | GROMMET | |
| 16. | 350-5720 | [1] | CLIP (LADDER) | |
| 17. | 6V-1820 M | [1] | BOLT (M10X1.5X30-MM) | |
| 18. | 6V-4248 M | [2] | BOLT (M10X1.5X25-MM) | |
| 19. | 6V-8214 M | [4] | BOLT (M6X1X20-MM) | |
| 20. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 21. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 22. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 23. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 24. | 4P-7428 | [1] | CLIP (LADDER) | |
| 25. | 4P-7581 | [2] | CLIP (LADDER) | |
| 26. | 3J-1907 | [5] | SEAL-O-RING | |
| 27. | 214-7568 | [1] | SEAL-O-RING | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Special Instruction
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DEPTH SENSOR MOUNTING BOLTS ON CERTAIN MD6250 AND MD6310 ROTARY BLASTHOLE DRILLS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DEPTH SENSOR MOUNTING BOLTS ON CERTAIN MD6250 AND MD6310 ROTARY BLASTHOLE DRILLS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DEPTH SENSOR MOUNTING BOLTS ON CERTAIN MD6250 AND MD6310 ROTARY BLASTHOLE DRILLS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Mast Winch Bracket Assembly May Fail on Certain MD6250 Rotary Drills {1439, 79NS}
Mast Winch Bracket Assembly May Fail on Certain MD6250 Rotary Drills {1439, 79NS}
Mast Winch Bracket Assembly May Fail on Certain MD6250 Rotary Drills {1439, 79NS}
Wire Insulation May Deteriorate On Certain MD6200, MD6250, and MD6310 Rotary Drills {1439}
Wire Insulation May Deteriorate On Certain MD6200, MD6250, and MD6310 Rotary Drills {1439}
Wire Insulation May Deteriorate On Certain MD6200, MD6250, and MD6310 Rotary Drills {1439}
Specifications
Pressure Sensor (NOx Reduction System)
C27 and C32 Tier 4 Final Engines for MD6250 Drill and MD6310 Drill
C27 and C32 Tier 4 Final Engines for MD6250 Drill and MD6310 Drill
Inlet Manifold Temperature Sensor
C27 and C32 Tier 4 Final Engines for MD6250 Drill and MD6310 Drill
C27 and C32 Tier 4 Final Engines for MD6250 Drill and MD6310 Drill
Temperature Sensor - Brake Cooling Oil and Hydraulic Tank
MD6250 Rotary Blasthole Drill Machine Systems
MD6250 Rotary Blasthole Drill Machine Systems
Pressure Sensor (Exhaust Differential)
C27 and C32 Tier 4 Final Engines for MD6250 Drill and MD6310 Drill
C27 and C32 Tier 4 Final Engines for MD6250 Drill and MD6310 Drill
Engine Coolant Temperature Sensor
C27 and C32 Tier 4 Final Engines for MD6250 Drill and MD6310 Drill
C27 and C32 Tier 4 Final Engines for MD6250 Drill and MD6310 Drill
Turbocharger Inlet Temperature Sensor
C27 and C32 Tier 4 Final Engines for MD6250 Drill and MD6310 Drill
C27 and C32 Tier 4 Final Engines for MD6250 Drill and MD6310 Drill
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DEPTH SENSOR MOUNTING BOLTS ON CERTAIN MD6250 AND MD6310 ROTARY BLASTHOLE DRILLS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DEPTH SENSOR MOUNTING BOLTS ON CERTAIN MD6250 AND MD6310 ROTARY BLASTHOLE DRILLS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DEPTH SENSOR MOUNTING BOLTS ON CERTAIN MD6250 AND MD6310 ROTARY BLASTHOLE DRILLS
Service Letter-Asia
Systems Operation
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DEPTH SENSOR MOUNTING BOLTS ON CERTAIN MD6250 AND MD6310 ROTARY BLASTHOLE DRILLS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DEPTH SENSOR MOUNTING BOLTS ON CERTAIN MD6250 AND MD6310 ROTARY BLASTHOLE DRILLS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DEPTH SENSOR MOUNTING BOLTS ON CERTAIN MD6250 AND MD6310 ROTARY BLASTHOLE DRILLS
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Turbocharger Outlet Pressure Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
Inlet Air Temperature Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
Inlet Air Temperature Sensor - Remove and Install - Right Side and Left Side
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - NRS Intake
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - NRS Differential Pressure
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
Fuel Pressure Sensor - Remove and Install - Filter Bypass
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
Turbocharger Outlet Pressure Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
Inlet Air Temperature Sensor - Remove and Install - Right Side and Left Side
C27 and C32 Engines for Caterpillar Built Machines
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
Improved Pipe Rack Group is Now Used for Certain MD6250 Rotary Drills {1439}
Improved Pipe Rack Group is Now Used for Certain MD6250 Rotary Drills {1439}
Improved Pipe Rack Group is Now Used for Certain MD6250 Rotary Drills {1439}
