OPERATOR STATION
CONTROL GP-ELECTROHYDRAULICMONITOR GP
SEAT GP
OPERATOR STATION
CONTROL GP-ELECTROHYDRAULIC
#M00879991350
509-8397: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 458-8675 HY | [1] | CONTROL GP-JOYSTICK (4-VALVE) | |
| 2. | 285-8017 H | [1] | FILM-IDENTIFICATION (JOYSTICK CONTROL, 4-FUNCTION) | |
| 3. | 112-6646 HM | [4] | LOCKNUT (M6X1-THD) | |
| 4. | 9X-2043 HM | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| H | FROM CONTROL & MTG GP-ELHYD | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00879991351
513-1140: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 L | [17] | STRAP-CABLE | |
| 2. | 7K-1181 L | [1] | STRAP-CABLE | |
| 3. | 201-1531 H | [1] | FILM-IDENTIFICATION (AUTODIG) | |
| 4. | 268-6497 H | [1] | FILM-IDENTIFICATION (PAYLOAD STORE) | |
| 5. | 278-8844 L | [1] | PLUG AS-CONNECTOR | |
| 8T-8737 | [2] | PLUG-SEAL | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 6. | 305-3458 J | [1] | CUSHION AS | |
| 7. | 337-9106 J | [1] | COVER | |
| 8. | 392-7082 J | [1] | COVER AS | |
| 9. | 423-7784 J | [1] | BRACKET AS | |
| 6V-9632 M | [5] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 10. | 449-4002 J | [1] | FILM-IDENTIFICATION (PEDAL LOCK) | |
| 11. | 503-4248 LY | [1] | HARNESS AS-OPERATOR CONTROLS (JOYSTICK) | |
| 12. | 091-8792 L | [1] | CLIP | |
| 13. | 0A-4664 L | [2] | CLIP | |
| 14. | 127-2170 LM | [5] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | |
| 15. | 230-5010 L | [1] | PLUG AS-CONNECTOR (6-PIN) | |
| 16. | 239-7352 L | [1] | PLUG AS-CONNECTOR (6-PIN) | |
| (EACH PLUG AS INCLUDES) | ||||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 17. | 3E-4352 L | [3] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 18. | 5C-2890 JM | [3] | NUT (M6X1-THD) | |
| 19. | 7C-4354 L | [3] | CLIP | |
| 20. | 8R-3695 J | [4] | GROMMET | |
| 21. | 8T-4197 JM | [1] | BOLT (M8X1.25X40-MM) | |
| 22. | 8T-4205 J | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 23. | 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 24. | 8T-4908 M | [4] | BOLT (M8X1.25X25-MM) | |
| 25. | 9X-2043 JM | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 26. | 9X-2044 LM | [1] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| H | FROM MONITOR AR-PAYLOAD | |||
| J | FROM CONTROL & MTG GP-ELHYD | |||
| L | FROM WIRING GP-CONTROL | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00879991352
562-0141: KIT-JOYSTICK CONTROL
562-0141 KIT-JOYSTICK CONTROL -2-FUNCTION
S/N XDJ880-UP
S/N XDJ880-UP
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 458-8669 Y | [1] | CONTROL GP-JOYSTICK (2-VALVE) | ||
| 539-3525 Y | [1] | HARNESS AS-OPERATOR CONTROLS (JOYSTICK) | ||
| 8T-7547 M | [4] | BOLT (M8X1.25X30-MM) | ||
| 283-8171 | [1] | BRACKET | ||
| 285-5521 | [1] | BRACKET AS | ||
| 423-7784 | [1] | BRACKET AS | ||
| 6V-9632 M | [5] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 0A-4664 | [2] | CLIP | ||
| 091-8792 | [1] | CLIP | ||
| 352-3968 | [1] | CLIP (LADDER) | ||
| 337-9106 | [1] | COVER | ||
| 392-7082 | [1] | COVER AS | ||
| 280-9440 | [1] | CUSHION AS | ||
| 305-3458 | [1] | CUSHION AS | ||
| 201-1531 | [1] | FILM-IDENTIFICATION (AUTODIG) | ||
| 268-6497 | [1] | FILM-IDENTIFICATION (PAYLOAD STORE) | ||
| 285-8015 | [1] | FILM-IDENTIFICATION (JOYSTICK CONTROL, 2-FUNCTION) | ||
| 8R-3695 | [2] | GROMMET | ||
| 253-8798 | [1] | KNOB | ||
| 112-6646 M | [4] | LOCKNUT (M6X1-THD) | ||
| 344-5673 M | [3] | NUT (M6X1-THD) | ||
| 344-5674 M | [1] | NUT (M8X1.25-THD) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 239-7352 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 9X-2043 M | [10] | SCREW-TRUSS HEAD (M6X1X14-MM) | ||
| 9X-2044 M | [1] | SCREW-TRUSS HEAD (M6X1X16-MM) | ||
| 127-2170 M | [3] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | ||
| 3S-2093 | [10] | STRAP-CABLE | ||
| 7K-1181 | [7] | STRAP-CABLE | ||
| 332-2155 | [2] | SWITCH AS-PUSH BUTTON (AUTODIG, PAYLOAD) | ||
| (EACH INCLUDES) | ||||
| 6F-0253 | [1] | LOCKWASHER | ||
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 284-3623 | [1] | SWITCH AS-ROCKER (24-VOLT)(HYDRAULIC LOCKOUT) | ||
| 8T-4897 | [1] | WASHER (10.2X35X6-MM THK) | ||
| 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00879991353
562-0142: KIT-JOYSTICK CONTROL
562-0142 KIT-JOYSTICK CONTROL -3-FUNCTION
S/N XDJ880-UP
S/N XDJ880-UP
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 458-8670 Y | [1] | CONTROL GP-JOYSTICK (3-VALVE) | ||
| 539-3525 Y | [1] | HARNESS AS-OPERATOR CONTROLS (JOYSTICK) | ||
| 8T-7547 M | [4] | BOLT (M8X1.25X30-MM) | ||
| 283-8171 | [1] | BRACKET | ||
| 285-5521 | [1] | BRACKET AS | ||
| 423-7784 | [1] | BRACKET AS | ||
| 6V-9632 M | [5] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 0A-4664 | [2] | CLIP | ||
| 091-8792 | [1] | CLIP | ||
| 352-3968 | [1] | CLIP (LADDER) | ||
| 337-9106 | [1] | COVER | ||
| 392-7082 | [1] | COVER AS | ||
| 280-9440 | [1] | CUSHION AS | ||
| 305-3458 | [1] | CUSHION AS | ||
| 201-1531 | [1] | FILM-IDENTIFICATION (AUTODIG) | ||
| 268-6497 | [1] | FILM-IDENTIFICATION (PAYLOAD STORE) | ||
| 285-8016 | [1] | FILM-IDENTIFICATION (JOYSTICK CONTROL, 3-FUNCTION) | ||
| 8R-3695 | [2] | GROMMET | ||
| 253-8798 | [1] | KNOB | ||
| 112-6646 M | [4] | LOCKNUT (M6X1-THD) | ||
| 344-5673 M | [3] | NUT (M6X1-THD) | ||
| 344-5674 M | [1] | NUT (M8X1.25-THD) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 239-7352 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 9X-2043 M | [10] | SCREW-TRUSS HEAD (M6X1X14-MM) | ||
| 9X-2044 M | [1] | SCREW-TRUSS HEAD (M6X1X16-MM) | ||
| 127-2170 M | [3] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | ||
| 3S-2093 | [10] | STRAP-CABLE | ||
| 7K-1181 | [7] | STRAP-CABLE | ||
| 332-2155 | [2] | SWITCH AS-PUSH BUTTON (AUTODIG, PAYLOAD) | ||
| (EACH INCLUDES) | ||||
| 6F-0253 | [1] | LOCKWASHER | ||
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 284-3623 | [1] | SWITCH AS-ROCKER (24-VOLT)(HYDRAULIC LOCKOUT) | ||
| 8T-4897 | [1] | WASHER (10.2X35X6-MM THK) | ||
| 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00879991354
566-7142: KIT-JOYSTICK CONTROL
566-7142 KIT-JOYSTICK CONTROL
S/N XDJ880-UP
HEAVY DUTY, 2-VALVE, SINGLE AXIS LEVER
S/N XDJ880-UP
HEAVY DUTY, 2-VALVE, SINGLE AXIS LEVER
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 361-6015 Y | [2] | CONTROL GP-HANDLE | ||
| 539-3523 Y | [1] | HARNESS AS-OPERATOR CONTROLS | ||
| 8T-4197 M | [1] | BOLT (M8X1.25X40-MM) | ||
| 8T-4908 M | [3] | BOLT (M8X1.25X25-MM) | ||
| 283-8171 | [1] | BRACKET | ||
| 285-5521 | [1] | BRACKET AS | ||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 495-0890 | [1] | BRACKET AS | ||
| 3E-6908 M | [1] | STUD-WELD (M8X1.25X20-MM) | ||
| 6V-9632 M | [7] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 0A-4664 | [2] | CLIP | ||
| 7C-4354 | [1] | CLIP | ||
| 352-3968 | [1] | CLIP (LADDER) | ||
| 282-6686 | [1] | COVER | ||
| 290-1264 | [1] | COVER | ||
| 280-9440 | [1] | CUSHION AS | ||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 290-1262 | [1] | CUSHION AS | ||
| 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | ||
| 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | ||
| 201-1531 | [1] | FILM-IDENTIFICATION (AUTODIG) | ||
| 268-6497 | [1] | FILM-IDENTIFICATION (PAYLOAD STORE) | ||
| 275-6530 | [1] | FILM-IDENTIFICATION (HORN, TRANSMISSION DIRECTION) | ||
| 449-4002 | [1] | FILM-IDENTIFICATION (PEDAL LOCK) | ||
| 450-5070 | [1] | FILM-INFORMATION (DIFFERENTIAL LOCK, HORN) | ||
| 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | ||
| 8R-3695 | [3] | GROMMET | ||
| 253-8798 | [1] | KNOB (ARMREST ADJUSTMENT) | ||
| 344-5674 M | [2] | NUT (M8X1.25-THD) | ||
| 172-8591 M | [4] | NUT-CLIP (M6X1-THD) | ||
| 228-6089 | [2] | PLUG (ROCKER SWITCH) | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 455-0709 | [1] | SEAL-CONNECTOR | ||
| 239-7352 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 9X-2043 M | [9] | SCREW-TRUSS HEAD (M6X1X14-MM) | ||
| 9X-2044 M | [1] | SCREW-TRUSS HEAD (M6X1X16-MM) | ||
| 9X-2045 M | [11] | SCREW-TRUSS HEAD (M6X1X20-MM) | ||
| 127-2170 M | [3] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | ||
| 6V-3987 D | SEAL (1-M) | |||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 7K-1181 | [14] | STRAP-CABLE | ||
| 332-2155 | [2] | SWITCH AS-PUSH BUTTON | ||
| (EACH INCLUDES) | ||||
| 6F-0253 | [1] | LOCKWASHER | ||
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 284-3623 | [1] | SWITCH AS-ROCKER (24-VOLT) | ||
| 7X-0578 | [1] | WASHER-HARD (10.2X32X2.5-MM THK) | ||
| 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00879991355
566-7143: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 458-8669 Y | [1] | CONTROL GP-JOYSTICK (2-VALVE) | ||
| 539-3525 Y | [1] | HARNESS AS-OPERATOR CONTROLS | ||
| 8T-4197 M | [1] | BOLT (M8X1.25X40-MM) | ||
| 8T-4908 M | [3] | BOLT (M8X1.25X25-MM) | ||
| 423-7784 | [1] | BRACKET AS | ||
| 6V-9632 M | [5] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 0A-4664 | [2] | CLIP | ||
| 091-8792 | [1] | CLIP | ||
| 352-3968 | [1] | CLIP (LADDER) | ||
| 337-9106 | [1] | COVER | ||
| 392-7082 | [1] | COVER AS | ||
| 305-3458 | [1] | CUSHION AS | ||
| M | [3] | BOLT-WELD | ||
| 201-1531 | [1] | FILM-IDENTIFICATION (AUTODIG) | ||
| 268-6497 | [1] | FILM-IDENTIFICATION (PAYLOAD STORE) | ||
| 285-8015 | [1] | FILM-IDENTIFICATION (JOYSTICK CONTROL, 2-FUNCTION) | ||
| 416-5284 | [1] | FILM-IDENTIFICATION (JOYSTICK CONTROL, 2-FUNCTION) | ||
| 449-4002 | [1] | FILM-IDENTIFICATION (PEDAL LOCK) | ||
| 8R-3695 | [4] | GROMMET | ||
| 5C-2890 M | [3] | NUT (M6X1-THD) | ||
| 344-5674 M | [1] | NUT (M8X1.25-THD) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 239-7352 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 9X-2043 M | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | ||
| 9X-2044 M | [1] | SCREW-TRUSS HEAD (M6X1X16-MM) | ||
| 127-2170 M | [3] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | ||
| 3S-2093 | [10] | STRAP-CABLE | ||
| 7K-1181 | [7] | STRAP-CABLE | ||
| 284-3623 | [1] | SWITCH AS-ROCKER (24-VOLT) | ||
| 8T-4897 | [1] | WASHER (10.2X35X6-MM THK) | ||
| 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00879991356
435-3706: KIT-MONITOR
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 259-4399 | [2] | BASE | |
| 2. | 270-3311 | [1] | CLAMP | |
| 3. | 464-6047 | [1] | MODULE GP-DISPLAY (WORK AREA VISUAL SYSTEM) | |
| 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 344-3847 | [1] | CABLE AS (DISPLAY) | ||
| 4. | 380-5963 | [1] | BRACKET AS | |
| 5. | 394-6930 Y | [1] | HARNESS AS-CONTROL (ELECTRONIC DISPLAY) | |
| 6. | 468-8101 | [1] | CABLE AS (WORK AREA VISUAL SYSTEM) | |
| 7. | 114-6658 | [3] | WASHER (6.5X17X1-MM THK) | |
| 8. | 3E-8020 M | [2] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 9. | 4B-4274 | [4] | WASHER (5.5X13X1.2-MM THK) | |
| 10. | 172-8591 M | [11] | NUT-CLIP (M6X1-THD) | |
| 11. | 7K-1181 | [11] | STRAP-CABLE | |
| 12. | 7Y-7388 M | [4] | SCREW-BUTTON HEAD (M5X0.8X12-MM) | |
| 13. | 8T-3991 M | [4] | SCREW-BUTTON HEAD (M6X1X20-MM) | |
| 14. | 9X-2045 M | [3] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 15. | 9X-6155 M | [10] | BOLT-SOCKET HEAD (M6X1X16.7-MM) | |
| 16. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00879991357
435-3406: KIT-PAYLOAD CONTROL
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 201-1531 | [1] | FILM-IDENTIFICATION (AUTODIG) | |
| 2. | 268-6497 | [1] | FILM-IDENTIFICATION (PAYLOAD STORE) | |
| 3. | 332-2155 | [1] | SWITCH AS-PUSH BUTTON (AUTODIG) | |
| 3A. | 332-2155 | [1] | SWITCH AS-PUSH BUTTON (PAYLOAD STORE) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 6F-0253 | [1] | LOCKWASHER | ||
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 4. | 349-1178 | [2] | SENSOR-PRESSURE (AUTODIG) | |
| 5. | 164-6874 | [1] | FITTING AS-ELBOW (QUICK DISCONNECT, MALE) | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 085-7356 | [1] | FITTING | ||
| 6. | 3J-1907 | [2] | SEAL-O-RING | |
| THIS KIT PROVIDES NECESSARY COMPONETS FOR A FIELD INSTALLED PCS & AUTODIG FOR MEDIUM WHEEL LOADER MACHINES | ||||
#M00879991358
483-5477: KIT-PRINTER
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 156-6175 H | [1] | CLIP (LADDER) | |
| 2. | 206-1345 H | [1] | STRAP-CABLE | |
| 3. | 259-4399 S | [2] | BASE | |
| 4. | 269-2556 H | [4] | SCREW-PAN HEAD (8-32X0.375-IN) | |
| 5. | 270-3311 S | [1] | CLAMP | |
| 6. | 346-1083 H | [1] | HARNESS AS-WIRING (PRINTER) | |
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 135-5009 E | TUBE-HEAT SHRINK (32-MM DIA)(5-CM) | |||
| 7. | 3E-8020 HM | [4] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 8. | 537-5523 H | [1] | PRINTER GP-COMPUTER | |
| 9. | 7K-1181 H | [1] | STRAP-CABLE | |
| E | ORDER BY THE CENTIMETER | |||
| H | FROM PRINTER GP-COMPUTER | |||
| M | METRIC PART | |||
| S | FROM BRACKET GP-MOUNTING | |||
#M00879991359
467-0160: KIT-SEAT COVER
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (INCLUDES BACK CUSHION COVER, HEADREST COVER, SEAT CUSHION COVER) | ||||
