AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

357-9783 CYLINDER & SEAL GP-BUCKET S/N TMC1-UP PART OF 357-9782 CYLINDER & LINES GP-BUCKET 336D2 EXCAVATOR


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
FILTER GP

EXCAVATOR 336D2 EXCAVATOR TMC
 336D2 L Excavator TMC00001-UP (MACHINE) POWERED BY C9 Engine M0088015 336D2 TMC   (2018)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & SEAL GP-BOOM
289-8049 CYLINDER & SEAL GP-BOOM
CYLINDER & SEAL GP-BUCKET
357-9765 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BUCKET
357-9783 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-STICK
289-8052 CYLINDER & SEAL GP-STICK
CYLINDER GP-BOOM
311-9531 CYLINDER GP-BOOM
CYLINDER GP-BUCKET
357-9766 CYLINDER GP-BUCKET
 

#M00880150250
 

357-9783: CYLINDER & SEAL GP-BUCKET

357-9783 CYLINDER & SEAL GP-BUCKET
S/N TMC1-UP
PART OF 357-9782 CYLINDER & LINES GP-BUCKET
i07213858 M0088015
3579783 CYLINDER & SEAL GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 357-9784 Y [1] CYLINDER GP-BUCKET  
3. 7X-4803 [2] SEAL-LIP TYPE  
4. 9X-4597 [2] SEAL-LIP TYPE  
  Y   SEPARATE ILLUSTRATION
 

#M00880150251
 

289-8052: CYLINDER & SEAL GP-STICK

289-8052 CYLINDER & SEAL GP-STICK
S/N TMC1-UP
PART OF 289-8051 CYLINDER & LINES GP-STICK
i07213906 M0088015
2898052 CYLINDER & SEAL GP-STICK Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-4803 [4] SEAL-LIP TYPE  
2. 418-9038 CY [1] CYLINDER GP-STICK  
3. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#M00880150252
 

311-9531: CYLINDER GP-BOOM

311-9531 CYLINDER GP-BOOM
S/N TMC1-UP
150-MM (5.9-IN) BORE X 1440-MM (56.7-IN) STROKE
PART OF 289-8049 CYLINDER & SEAL GP-BOOM
i07213880 M0088015
3119531 CYLINDER GP-BOOM Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 359-7191 [1] STOP  
2. 358-8524 [1] HEAD  
3. 7Y-4669 J [1] RING-BACKUP  
4. 7Y-4695 M [1] LOCKNUT (M80X2-THD)  
5. 495-8212 J [1] SEAL AS  
6. 324-6438 J [1] SEAL-BUFFER  
7. 358-8523 [1] PISTON  
8. 188-4218 J [1] RING  
9. 242-6833 J [1] RING-SEAL  
10. 358-5983 [1] ROD AS  
10A. 284-7354 [1] BUSHING  
11. 358-5973 [1] CYLINDER AS  
11A. 241-7280 [1] BUSHING  
12. 7Y-4672 [1] RING-RETAINING  
13. 133-6813 J [1] SEAL-LIP TYPE  
14. 188-4217 J [2] RING  
15. 095-1633 J [1] SEAL-O-RING  
16. 114-0760 [1] BUSHING  
17. 324-6439 J [1] SEAL-U-CUP  
18. 7Y-4673 J [1] RING-BACKUP  
19. 7Y-5215 M [8] BOLT-SOCKET HEAD (M24X3X90-MM)  
   
    AVAILABLE REPAIR KIT(S):
  519-7962 J [1] KIT-SEAL (BOOM CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#M00880150253
 

357-9766: CYLINDER GP-BUCKET

357-9766 CYLINDER GP-BUCKET
S/N TMC1-UP
150-MM (5.9-IN) BORE X 1151-MM (45.3-IN) STROKE
PART OF 357-9765 CYLINDER & SEAL GP-BUCKET
i07214080 M0088015
3579766 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4695 M [1] LOCKNUT (M80X2-THD)  
2. 165-9290 J [1] SEAL-LIP TYPE  
3. 188-4217 J [2] RING  
4. 188-4218 J [1] RING  
5. 357-9767 [1] CYLINDER AS  
5A. 290-9180 [1] BUSHING  
6. 357-9776 [1] ROD AS  
6A. 228-5617 [1] BUSHING  
7. 358-8523 [1] PISTON  
8. 358-8524 [1] HEAD  
9. 095-1633 J [1] SEAL-O-RING  
10. 114-0760 [1] BUSHING  
11. 324-6438 J [1] SEAL-BUFFER  
12. 324-6439 J [1] SEAL-U-CUP  
13. 7Y-4669 J [1] RING-BACKUP  
14. 7Y-4672 [1] RING-RETAINING  
15. 7Y-4673 J [1] RING-BACKUP  
16. 7Y-5215 M [8] BOLT-SOCKET HEAD (M24X3X90-MM)  
17. 495-8212 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  518-5138 J [1] KIT-SEAL (BUCKET CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#M00880150254
 

357-9784: CYLINDER GP-BUCKET

357-9784 CYLINDER GP-BUCKET
S/N TMC1-UP
160-MM (6.3-IN) BORE X 1356-MM (53.4-IN) STROKE
PART OF 357-9783 CYLINDER & SEAL GP-BUCKET
i07213861 M0088015
3579784 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-2112 M [1] LOCKNUT-SPECIAL (M90X2-THD)  
2. 357-9785 [1] CYLINDER AS  
2A. 290-9182 [1] BUSHING  
3. 357-9794 [1] ROD AS  
3A. 087-5548 [1] BUSHING  
4. 358-8527 [1] PISTON  
5. 358-8528 [1] HEAD  
6. 087-5550 J [1] RING-BACKUP  
7. 095-1635 J [1] SEAL-O-RING  
8. 114-0762 [1] BUSHING  
9. 165-9291 J [1] SEAL-LIP TYPE  
10. 185-0230 J [2] RING  
11. 185-0231 J [1] RING  
12. 333-8687 J [1] SEAL-BUFFER  
13. 333-8688 J [1] SEAL-U-CUP  
14. 7Y-4941 J [1] RING-BACKUP  
15. 7Y-4944 [1] RING-RETAINING  
16. 7Y-5239 M [8] BOLT-SOCKET HEAD (M24X3X100-MM)  
17. 506-2321 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  518-5136 J [1] KIT-SEAL (BUCKET CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#M00880150255
 

418-9038: CYLINDER GP-STICK

418-9038 CYLINDER GP-STICK
S/N TMC1-UP
170-MM (6.7-IN) BORE X 1738-MM (68.4-IN) STROKE
PART OF 289-8052 CYLINDER & SEAL GP-STICK
i07213907 M0088015
4189038 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4956 M [1] LOCKNUT (M90X2-THD)  
2. 103-8345 [1] RING-RETAINING  
3. 107-6579 [1] RING  
4. 231-6843 J [1] RING-SEAL  
5. 324-9484 J [1] SEAL-BUFFER  
6. 324-9486 J [1] SEAL-U-CUP  
7. 357-4704 [1] CYLINDER AS  
7A. 290-9183 [1] BUSHING  
8. 357-4713 [1] ROD AS  
8A. 290-9183 [1] BUSHING  
9. 358-8525 [1] PISTON  
10. 359-7188 [1] STOP  
11. 359-7192 [1] STOP  
12. 375-1723 [1] HEAD  
13. 375-1732 J [2] RING-BACKUP  
14. 095-0930 [2] RING-RETAINING (EXTERNAL)  
15. 140-0240 J [1] SEAL-O-RING  
16. 191-5604 J [2] RING  
17. 191-5605 J [1] RING  
18. 191-5643 [1] RING-RETAINING  
19. 191-5644 [1] BUSHING  
20. 191-5647 J [1] RING-BACKUP  
21. 209-5877 J [1] SEAL-LIP TYPE  
22. 7Y-5239 M [8] BOLT-SOCKET HEAD (M24X3X100-MM)  
23. 506-2322 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  519-7968 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#M00880150256
 

378-9558: DRIVE GP-SWING

378-9558 DRIVE GP-SWING -WITHOUT MOTOR
S/N TMC1-UP
PART OF 447-2485 DRIVE GP-SWING
i07219870 M0088015
3789558 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-6112 [1] BREATHER (SWING DRIVE)  
2. 6V-7238 [1] VALVE-SHUTOFF  
3. 7I-7611 [1] CAGE  
4. 7I-7619 [1] BEARING-ROLLER  
5. 9U-8693 [1] BEARING-ROLLER  
6. 094-1528 [6] WASHER (53X84X1-MM THK)  
7. 110-7149 [1] RING-RETAINING  
8. 114-1322 [1] RING-RETAINING  
9. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
10. 114-1399 [1] PIPE-GAUGE  
11. 127-3872 I [1] HOSE AS  
12. 148-4605 [1] SHAFT-PINION  
13. 171-9413 [1] SPACER (140.5X160X103.2-MM THK)  
14. 227-6215 [1] BOSS (1/4-18-THD)  
15. 296-6269 [3] BEARING-ROLLER  
16. 453-1671 [1] CARRIER-PLANETARY  
17. 378-9524 [4] SHAFT  
18. 378-9525 [8] WASHER (62.3X104X1-MM THK)  
19. 378-9526 [1] GEAR-RING (67-TEETH)  
20. 378-9527 [4] GEAR-PLANETARY (24-TEETH)  
21. 378-9528 [3] GEAR-PLANETARY (24-TEETH)  
22. 378-9529 [1] GEAR-SUN (13-TEETH)  
23. 378-9530 [1] GEAR-SUN (17-TEETH)  
24. 378-9531 [1] CARRIER AS  
25. 378-9535 [1] HOUSING  
26. 378-9560 [1] COVER-HOUSING  
27. 378-9593 [8] BEARING AS  
28. 093-1730 [1] RING-RETAINING  
29. 095-0927 [3] RING-RETAINING  
30. 096-1441 [1] RING-RETAINING  
31. 510-1989 [4] PIN-SPRING  
32. 128-9170 [2] SEAL-LIP TYPE  
33. 136-2803 [2] CLIP  
34. 3K-0360 [1] SEAL-O-RING  
35. 5M-4454 [1] SEAL-O-RING  
36. 7D-5363 [2] CONNECTOR (9/16-18-THD)  
37. 7I-7684 M [2] SPACER (50X79.6X6-MM THK)  
38. 8T-0348 M [24] BOLT-SOCKET HEAD (M16X2X50-MM)  
39. 453-3447 M [22] BOLT (M12X1.75X40-MM)  
40. 451-2182 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
41. 8T-4244 M [1] NUT (M12X1.75-THD)  
42. 453-3446 M [1] BOLT (M12X1.75X35-MM)  
43. 451-2175 [24] WASHER-HARD (17.5X30X3.5-MM THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00880150257
 

447-2485: DRIVE GP-SWING

447-2485 DRIVE GP-SWING -WITH MOTOR
S/N TMC1-UP
PART OF 486-7850 POWER TRAIN AR
i07219863 M0088015
4472485 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 200-3372 Y [1] MOTOR & MTG GP-SWING  
2. 378-9558 Y [1] DRIVE GP-SWING (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#M00880150258
 

191-2577: FASTENER GP-SWING & FINAL DR

191-2577 FASTENER GP-SWING & FINAL DR
S/N TMC1-UP
PART OF 486-7850 POWER TRAIN AR
i07219860 M0088015
1912577 FASTENER GP-SWING & FINAL DR Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 461-3883 M [40] BOLT (M24X3X80-MM)  
2. 6V-8237 [63] WASHER (26X44X4-MM THK)  
3. 461-3882 M [23] BOLT (M24X3X70-MM)  
4. 5D-1026 [1] CLAMP-BAND  
5. 5P-0767 E HOSE (90-CM)  
6. 2B-7561 [2] CORK  
7. 096-4755 [1] PIN  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#M00880150259
 

158-8987: FILTER & VALVE GP-PILOT

158-8987 FILTER & VALVE GP-PILOT -HYDRAULIC OIL
S/N TMC1-UP
PART OF 453-2702 TANK & FILTER GP-HYDRAULIC
i04915456 M0088015
1588987 FILTER & VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-8670 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, PILOT)  
2. 215-4909 [1] VALVE GP-PILOT RELIEF (HYDRAULIC FILTER)  
2A. 095-1584 [1] SEAL-O-RING  
2B. 095-1590 [1] SEAL-O-RING  
2C. 095-1596 [1] SEAL-O-RING  
 

Information:

Special Instruction
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Specifications
Boom Lines
336D2 and 340D2 Excavators Machine System
Bucket Cylinder
336D2 and 340D2 Excavators Machine System
Bucket Cylinder
336D2 and 340D2 Excavators Machine System
Stick Cylinder
336D2 and 340D2 Excavators Machine System
Boom Cylinder
336D2 and 340D2 Excavators Machine System
Boom Cylinder Lines
336D2 and 340D2 Excavators Machine System
Boom Cylinder Lines
336D2 and 340D2 Excavators Machine System
Systems Operation
Cylinders (Boom, Stick and Bucket)
336D2 and 340D2 Excavators Hydraulic System
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Cylinder Drift - Check - Empty Bucket
336D2 and 340D2 Excavators Hydraulic System
Cylinder Speed - Check
336D2 and 340D2 Excavators Hydraulic System
Cylinder Drift - Check - Loaded Bucket
336D2 and 340D2 Excavators Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Caterpillar Parts SIS Catalog 336D2 :

CYLINDER & SEAL GP-BUCKET
357-9765 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BOOM
289-8049 CYLINDER & SEAL GP-BOOM
289-8051 CYLINDER & LINES GP-STICK
357-9782 CYLINDER & LINES GP-BUCKET
357-9764 CYLINDER & LINES GP-BUCKET
289-8048 CYLINDER & LINES GP-BOOM
289-8047 CYLINDER & LINES GP-BOOM
COUPLING GP-PUMP
368-8312 COUPLING GP-PUMP
CYLINDER & SEAL GP-STICK
289-8052 CYLINDER & SEAL GP-STICK
CYLINDER GP-BOOM
311-9531 CYLINDER GP-BOOM
CYLINDER GP-BUCKET
357-9766 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
357-9784 CYLINDER GP-BUCKET
CYLINDER GP-STICK
418-9038 CYLINDER GP-STICK
DRIVE GP-SWING
378-9558 DRIVE GP-SWING
DRIVE GP-SWING
447-2485 DRIVE GP-SWING
FASTENER GP-SWING & FINAL DR
191-2577 FASTENER GP-SWING & FINAL DR
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.