AIR INLET AND EXHAUST SYSTEM
AFTERCOOLER GPLINES GP-AIR
EXHAUST GP
LINES GP-AIR
AIR INLET AND EXHAUST SYSTEM
AFTERCOOLER GP
#M00880330140
350-5257: LINES GP-AFTERCOOLER AIR
350-5257 LINES GP-AFTERCOOLER AIR
S/N Z8Z1-UP
PART OF 350-5248 INSTALLATION AR-ENGINE
S/N Z8Z1-UP
PART OF 350-5248 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 993K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 127-0929 | [2] | CLAMP-V BAND | |
| 2. | 178-3129 | [2] | GROMMET | |
| 3. | 208-6135 C | [2] | CLIP (SLOT) | |
| 4. | 208-6136 C | [2] | CLIP (TAB) | |
| 5. | 217-7088 | [4] | HOSE | |
| 6. | 217-8946 | [2] | ELBOW | |
| 7. | 339-1198 | [4] | ELBOW | |
| 8. | 346-8730 | [2] | GROMMET | |
| 9. | 346-8746 C | [1] | PLATE | |
| 10. | 350-5274 | [1] | TUBE | |
| 11. | 350-5275 | [1] | TUBE | |
| 12. | 369-7042 CY | [1] | WIRING GP-SENSOR (AFTERCOOLER AIR, ENG COOLANT) | |
| 13. | 376-1706 C | [1] | PLATE | |
| 14. | 376-1707 C | [1] | PLATE AS | |
| 15. | 378-2711 C | [1] | SUPPORT AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 16. | 381-1629 C | [2] | TUBE | |
| 17. | 381-1630 C | [1] | TUBE | |
| 18. | 381-1632 C | [1] | TUBE AS | |
| 19. | 183-3409 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8002 | [1] | PLUG (7/16-20-THD) | ||
| 033-5853 | [1] | SEAL-O-RING | ||
| 20. | 208-7448 C | [20] | CLAMP | |
| 21. | 6V-8801 C | [4] | NUT (3/8-16-THD) | |
| 22. | 7C-3910 C | [2] | HOSE | |
| 23. | 8C-3089 | [2] | SEAL-O-RING | |
| 24. | 8T-4121 C | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4138 CM | [2] | BOLT (M6X1X20-MM) | |
| 26. | 8T-4196 CM | [2] | BOLT (M10X1.5X35-MM) | |
| 27. | 8T-4896 C | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 28. | 9X-8256 C | [2] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00880330141
350-5259: LINES GP-AFTERCOOLER AIR
350-5259 LINES GP-AFTERCOOLER AIR
S/N Z8Z1-UP
PART OF 350-5250 INSTALLATION AR-ENGINE
S/N Z8Z1-UP
PART OF 350-5250 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 993K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 127-0929 | [2] | CLAMP-V BAND | |
| 2. | 178-3129 | [2] | GROMMET | |
| 3. | 208-6135 | [2] | CLIP (SLOT) | |
| 4. | 208-6136 | [2] | CLIP (TAB) | |
| 5. | 217-7088 | [4] | HOSE | |
| 6. | 217-8946 | [2] | ELBOW | |
| 7. | 339-1198 | [4] | ELBOW | |
| 8. | 346-8730 | [2] | GROMMET | |
| 9. | 346-8746 | [1] | PLATE | |
| 10. | 350-5285 | [1] | TUBE | |
| 11. | 350-5286 | [1] | TUBE | |
| 12. | 376-1706 | [1] | PLATE | |
| 13. | 376-1707 | [1] | PLATE AS | |
| 14. | 378-2711 | [1] | SUPPORT AS | |
| 15. | 381-1629 | [2] | TUBE | |
| 16. | 381-1630 | [2] | TUBE | |
| 17. | 183-3409 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8002 | [1] | PLUG (7/16-20-THD) | ||
| 033-5853 | [1] | SEAL-O-RING | ||
| 18. | 208-7448 | [20] | CLAMP | |
| 19. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 20. | 7C-3910 | [2] | HOSE | |
| 21. | 8C-3089 | [2] | SEAL-O-RING | |
| 22. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 23. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 24. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 25. | 8T-4896 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 26. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#M00880330142
347-4291: LINES GP-AIR
347-4291 LINES GP-AIR -INLET
S/N NZK1-UP
PART OF 313-3998 ENGINE AR-COMPLETE
FOR USE WITH MACHINE ENGINES REQUIRING DUAL AIR INLET
S/N NZK1-UP
PART OF 313-3998 ENGINE AR-COMPLETE
FOR USE WITH MACHINE ENGINES REQUIRING DUAL AIR INLET
For full view, you need register
Parts for your 993K WHEEL LOADER:
CATERPILLAR SIS#M00880330143
348-7879: LINES GP-AIR
348-7879 LINES GP-AIR
S/N NZK1-UP
PART OF 340-2668, 340-2669, 340-2670, 340-2671 ENGINE AR-COMPLETE
FOR USE WITH MACHINE ENGINES REQUIRING DUAL AIR INLET
S/N NZK1-UP
PART OF 340-2668, 340-2669, 340-2670, 340-2671 ENGINE AR-COMPLETE
FOR USE WITH MACHINE ENGINES REQUIRING DUAL AIR INLET
For full view, you need register
#M00880330144
350-5258: LINES GP-AIR
For full view, you need register
Parts for your 993K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6N-6984 C | [6] | MOUNT-RUBBER | |
| 2. | 9Y-6102 | [2] | ELBOW | |
| 3. | 178-9410 | [2] | HOSE-ELBOW | |
| 4. | 300-0527 | [2] | HOSE | |
| 5. | 350-5277 | [2] | TUBE AS | |
| 6. | 393-5161 C | [2] | BRACKET | |
| 7. | 350-5281 | [1] | TUBE | |
| 8. | 350-5282 | [1] | TUBE | |
| 9. | 393-5162 C | [1] | PLATE | |
| 10. | 393-5172 C | [1] | PLATE | |
| 11. | 233-8350 | [10] | CLAMP (T-BOLT) | |
| 12. | 247-1925 | [2] | CLAMP-T BOLT | |
| 13. | 183-6121 C | [6] | WASHER (10.31X38.1X4.78-MM THK) | |
| 14. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 16. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 17. | 8T-4186 CM | [6] | BOLT (M10X1.5X40-MM) | |
| 18. | 8T-4133 CM | [6] | NUT (M10X1.5-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#M00880330145
350-5260: LINES GP-AIR
For full view, you need register
Parts for your 993K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9N-0720 Y | [2] | ELBOW-AIR INLET | |
| 2. | 9Y-6102 | [2] | ELBOW | |
| 3. | 300-0527 | [2] | HOSE | |
| 4. | 350-5277 | [2] | TUBE AS | |
| 5. | 350-5283 | [1] | TUBE | |
| 6. | 350-5284 | [1] | TUBE | |
| 7. | 393-5161 | [2] | BRACKET | |
| 8. | 393-5162 | [1] | PLATE | |
| 9. | 393-5172 | [1] | PLATE | |
| 10. | 183-6121 | [6] | WASHER (10.31X38.1X4.78-MM THK) | |
| 11. | 233-8350 | [12] | CLAMP (T-BOLT) | |
| 12. | 6N-6984 | [6] | MOUNT-RUBBER | |
| 13. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4133 M | [6] | NUT (M10X1.5-THD) | |
| 15. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 16. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 17. | 8T-4186 M | [6] | BOLT (M10X1.5X40-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00880330146
365-5466: LINES GP-AIR
365-5466 LINES GP-AIR
S/N NZK1-UP
PART OF 313-3998 ENGINE AR-COMPLETE
CANNOT BE USED WITH ENGINE MOUNTED CEM
S/N NZK1-UP
PART OF 313-3998 ENGINE AR-COMPLETE
CANNOT BE USED WITH ENGINE MOUNTED CEM
For full view, you need register
Parts for your 993K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9N-5085 | [4] | CLAMP | |
| 2. | 345-8988 | [1] | BRACKET AS | |
| 3. | 459-8403 C | [1] | MANIFOLD | |
| 4. | 356-0366 | [1] | TUBE-AIR | |
| 5. | 356-0367 | [1] | TUBE AS | |
| 6. | 356-0368 | [1] | TUBE-AIR | |
| 7. | 356-0369 | [1] | TUBE AS | |
| 8. | 374-0645 | [1] | BRACKET | |
| 9. | 356-0371 | [1] | BRACKET | |
| 10. | 356-0372 | [1] | BRACKET | |
| 11. | 371-8028 | [1] | BRACKET | |
| 12. | 356-0374 | [4] | SUPPORT | |
| 13. | 365-5486 | [4] | CLAMP | |
| 14. | 357-6735 | [2] | HOSE AS | |
| 15. | 365-5470 | [1] | TUBE (VENTURI) | |
| 16. | 0L-2070 | [4] | BOLT (3/8-16X2.25-IN) | |
| 17. | 0S-1594 | [4] | BOLT (3/8-16X1-IN) | |
| 18. | 4B-3388 C | [2] | BOLT (5/16-18X1.125-IN) | |
| 19. | 109-2332 | [2] | SEAL-O-RING | |
| 20. | 273-5039 | [1] | SEAL-O-RING | |
| 21. | 7X-0319 | [2] | BOLT (7/16-14X4.25-IN) | |
| 22. | 2M-2488 | [8] | STUD-TAPERLOCK (3/8-16X3.59-IN) | |
| 23. | 314-7599 | [4] | CLAMP-BAND | |
| 24. | 3B-1915 | [4] | BOLT (3/8-16X1.375-IN) | |
| 25. | 5M-2894 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 26. | 5P-8244 | [2] | WASHER-HARD (12X22.5X2.5-MM THK) | |
| 27. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 28. | 9S-8752 | [8] | NUT-FULL (3/8-16-THD) | |
| 29. | 9X-6458 | [12] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#M00880330147
350-5255: LINES GP-EXHAUST
For full view, you need register
Parts for your 993K WHEEL LOADER:
CATERPILLAR SIS#M00880330148
350-5261: LINES GP-EXHAUST
For full view, you need register
Parts for your 993K WHEEL LOADER:
CATERPILLAR SIS#M00880330149
350-1091: LINES GP-TURBOCHARGER AIR
350-1091 LINES GP-TURBOCHARGER AIR
S/N NZK1-UP
PART OF 313-3998 ENGINE AR-COMPLETE
FOR USE WITH REAR TURBO EXHAUST AND TURBO AT THE CENTER OF THE ENGINE
S/N NZK1-UP
PART OF 313-3998 ENGINE AR-COMPLETE
FOR USE WITH REAR TURBO EXHAUST AND TURBO AT THE CENTER OF THE ENGINE
For full view, you need register
Parts for your 993K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 2. | 364-2003 | [1] | TUBE AS-AIR | |
| 3. | 317-7012 | [4] | CLAMP-BAND | |
| 4. | 364-2004 | [1] | TUBE AS-AIR | |
| 5. | 364-2005 | [1] | TUBE AS-AIR | |
| 6. | 359-1019 | [1] | BRACKET AS | |
| 4K-9097 | [1] | NUT-WELD (5/16-18-THD) | ||
| 7. | 395-4240 | [1] | TUBE AS-AIR | |
| 8. | 362-1615 | [3] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 4K-9097 | [1] | NUT-WELD (5/16-18-THD) | ||
| 9. | 367-2173 | [1] | TUBE AS-AIR | |
| 10. | 367-2174 | [1] | TUBE AS-AIR | |
| 11. | 281-5849 | [1] | TEE-UNION | |
| 12. | 214-1048 | [1] | SPACER (8.8X16X4-MM THK) | |
| 13. | 0L-1351 | [1] | BOLT (3/8-16X0.875-IN) | |
| 14. | 0S-0509 | [1] | BOLT (3/8-16X0.75-IN) | |
| 15. | 0S-1617 | [1] | BOLT (5/16-18X0.75-IN) | |
| 16. | 174-9599 | [1] | STUD (3/8-16-THD) | |
| 17. | 365-0592 | [1] | CONNECTOR AS | |
| 364-9633 | [1] | CONNECTOR | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 18. | 1W-7474 | [1] | STUD (3/8-16X2.25-IN) | |
| 19. | 364-9622 | [1] | CONNECTOR AS | |
| 214-7567 | [1] | SEAL-O-RING | ||
| 364-9621 | [1] | CONNECTOR | ||
| 20. | 290-1993 | [6] | STRAP-CABLE | |
| 21. | 2B-2695 | [2] | BOLT (5/16-18X0.875-IN) | |
| 22. | 2H-3755 | [44] | BOLT (5/16-18X0.43-IN) | |
| 23. | 342-2134 | [3] | CLIP | |
| 24. | 345-3350 | [4] | CLIP | |
| 25. | 347-4450 | [1] | ADAPTER AS | |
| 171-6469 | [1] | ELBOW | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 26. | 5M-2894 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 28. | 337-4178 E | HOSE (11-CM) | ||
| 28A. | 337-4178 E | HOSE (18-CM) | ||
| 29. | 330-4374 E | SLEEVE (17-CM) | ||
| 29A. | 330-4374 E | SLEEVE (30-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
