ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-COMMUNICATIONCONTROL GP-UNPROGRAMMED
ELECTRONICS GP-MACHINE
ELECTRONICS GP-MONITOR
HARNESS GP
ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-COMMUNICATION
#M00880630130
459-0786: CONTROL GP-COMMUNICATION
459-0786 CONTROL GP-COMMUNICATION
S/N WEC1-UP
PART OF 417-4722 CONTROL GP-COMMUNICATION
S/N WEC1-UP
PART OF 417-4722 CONTROL GP-COMMUNICATION
For full view, you need register
Parts for your 349D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 175-4168 | [12] | SCREW-PAN HEAD (6-32X0.37-IN) | |
| 2. | 272-2379 | [1] | FILM-WARNING (EXPLOSION HAZARD, READ OMM) | |
| 3. | 7X-6315 | [1] | STRAP AS-GROUND | |
| 5P-6006 D | TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M) | |||
| 2L-8078 | [1] | TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW) | ||
| 2L-8075 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 4. | 8C-8514 | [1] | SCREW-MACHINE (8-32X0.375-IN) | |
| 5. | 134-4126 | [1] | WASHER (4.52X8.28X0.76-MM THK) | |
| D | ORDER BY THE METER | |||
#M00880630131
440-2105: CONTROL GP-UNPROGRAMMED
440-2105 CONTROL GP-UNPROGRAMMED -PL641E CELLULAR
S/N WEC1-UP
PART OF 505-4859 CONTROL & MTG GP-COMMUNICATION
S/N WEC1-UP
PART OF 505-4859 CONTROL & MTG GP-COMMUNICATION
For full view, you need register
Parts for your 349D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 568-5111 F | [1] | SOFTWARE GP-MONITOR (CELLULAR) | ||
| F | NOT SHOWN | |||
#M00880630132
456-9468: ELECTRONICS GP-MACHINE
456-9468 ELECTRONICS GP-MACHINE -ELECTRONIC CONTROL MODULE
S/N WEC1-UP
HIGH HORSEPOWER
PART OF 456-0877 GENERAL AR
S/N WEC1-UP
HIGH HORSEPOWER
PART OF 456-0877 GENERAL AR
For full view, you need register
Parts for your 349D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 526-1777 | [1] | SOFTWARE GP-MACHINE |
#M00880630133
221-8861: ELECTRONICS GP-MONITOR
For full view, you need register
Parts for your 349D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 450-0712 | [1] | SOFTWARE GP-MONITOR |
#M00880630134
517-4913: ELECTRONICS GP-MONITOR
517-4913 ELECTRONICS GP-MONITOR
S/N WEC1-UP
PART OF 503-6901 CONTROL AR-COMMUNICATION
S/N WEC1-UP
PART OF 503-6901 CONTROL AR-COMMUNICATION
For full view, you need register
Parts for your 349D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 559-7325 | [1] | SOFTWARE GP-MONITOR (NETWORK MANAGER)(PRODUCT LINK) |
#M00880630135
519-6935: ELECTRONICS GP-MONITOR
519-6935 ELECTRONICS GP-MONITOR -TELEMATICS
S/N WEC1-UP
CELLULAR
PART OF 503-6901 CONTROL AR-COMMUNICATION
S/N WEC1-UP
CELLULAR
PART OF 503-6901 CONTROL AR-COMMUNICATION
For full view, you need register
Parts for your 349D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 544-1118 | [1] | SOFTWARE GP-MONITOR |
#M00880630136
524-6969: HARNESS AS-CHASSIS
524-6969 HARNESS AS-CHASSIS -PLE641+PL631
S/N WEC1-UP
PART OF 505-4863 WIRING GP-COMMUNICATION
S/N WEC1-UP
PART OF 505-4863 WIRING GP-COMMUNICATION
For full view, you need register
Parts for your 349D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 8T-8729 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 147-1445 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2256 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [58] | PLUG-SEAL | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 243-4508 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 9X-3402 | [34] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [34] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 5P-6001 D | TUBE-HEAT SHRINK (4.75-MM DIA)(0.3-M) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(20-CM) | |||
| 155-2258 | [1] | WEDGE-PLUG LOCK (12-PIN) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#M00880630137
385-2664: HARNESS AS-ENGINE
385-2664 HARNESS AS-ENGINE
S/N TXF5182-8664
PART OF 354-0045 WIRING GP-ELECTRONIC CONTROL
FOR USE WITH INDUSTRIAL AND COMMERCIAL APPLICATIONS WITH OCV SYSTEM
CANNOT BE USED WITH MACHINE APPLICATIONS INDUSTRIAL AND COMMERCIAL APPLICATIONS WITH NO OVC SYSTEM
S/N TXF5182-8664
PART OF 354-0045 WIRING GP-ELECTRONIC CONTROL
FOR USE WITH INDUSTRIAL AND COMMERCIAL APPLICATIONS WITH OCV SYSTEM
CANNOT BE USED WITH MACHINE APPLICATIONS INDUSTRIAL AND COMMERCIAL APPLICATIONS WITH NO OVC SYSTEM
For full view, you need register
Parts for your 349D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 211-6807 | [1] | COVER-CONNECTOR | ||
| 105-1797 | [1] | MOUNT | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4011 | [4] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 237-0227 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 264-5732 | [1] | PLUG AS-CONNECTOR (120-PIN) | ||
| 288-7324 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [93] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3402 | [68] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [68] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 1P-0810 B | [1] | TAPE-ELECTRICAL | ||
| 155-2258 | [1] | WEDGE-PLUG LOCK (12-PIN) | ||
| 155-2259 | [1] | WEDGE-PLUG LOCK (8-PIN) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#M00880630138
516-4037: HARNESS AS-SENSOR
516-4037 HARNESS AS-SENSOR
S/N TXF8665-UP
PART OF 354-0045 WIRING GP-ELECTRONIC CONTROL
S/N TXF8665-UP
PART OF 354-0045 WIRING GP-ELECTRONIC CONTROL
For full view, you need register
Parts for your 349D2 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 211-6807 | [1] | COVER-CONNECTOR | ||
| 105-1797 | [1] | MOUNT | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 230-4011 | [4] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 237-0227 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 264-5732 | [1] | PLUG AS-CONNECTOR (120-PIN) | ||
| 288-7324 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [93] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3402 | [68] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [68] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 155-2258 | [1] | WEDGE-PLUG LOCK (12-PIN) | ||
| 155-2259 | [1] | WEDGE-PLUG LOCK (8-PIN) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#M00880630139
319-0956: HARNESS AS-SOLENOID
For full view, you need register
Parts for your 349D2 EXCAVATOR:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-COMMUNICATION
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>®</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
