ELECTRICAL AND STARTING SYSTEM
BATTERY GPALTERNATOR GP-CHARGING
HARNESS GP
ELECTRICAL AND STARTING SYSTEM
BATTERY GP
#M00891290150
492-8330: ELECTRICAL AR
For full view, you need register
Parts for your MD6310 ROTARY DRILL:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 494-1196 Y | [1] | ENCLOSURE AR | ||
| 559-4075 Y | [1] | WIRING GP-ALARM | ||
| 494-1191 Y | [1] | WIRING GP-CHASSIS (FRONT) | ||
| 494-1192 Y | [1] | WIRING GP-CHASSIS (REAR) | ||
| 494-1194 Y | [1] | WIRING GP-CHASSIS (FRAME, RH) | ||
| 494-1197 Y | [1] | WIRING GP-ENGINE | ||
| 494-1193 Y | [1] | WIRING GP-START CONTROL | ||
| 494-1195 Y | [1] | WIRING GP-VALVE | ||
| Y | SEPARATE ILLUSTRATION | |||
#M00891290151
528-4294: GUARD GP-ALTERNATOR
For full view, you need register
Parts for your MD6310 ROTARY DRILL:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 524-1795 | [1] | GUARD GP-ALTERNATOR | |
| 522-1277 | [1] | GUARD AS | ||
| 2. | 198-4777 | [2] | WASHER-HARD (11X25X10-MM THK) | |
| 3. | 198-4778 | [2] | WASHER-HARD (13.5X30X12-MM THK) | |
| 4. | 1A-5822 | [2] | BOLT (1/2-13X2.75-IN) | |
| 5. | 292-7635 | [2] | BOSS | |
| 6. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 7. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 8. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| M | METRIC PART | |||
#M00891290152
569-8662: HARNESS AS-ALARM
569-8662 HARNESS AS-ALARM -TRAM ALARM
S/N DLZ1-UP
JUMPER
PART OF 569-8663 WIRING GP-ALARM
S/N DLZ1-UP
JUMPER
PART OF 569-8663 WIRING GP-ALARM
For full view, you need register
Parts for your MD6310 ROTARY DRILL:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 555-2617 H | SLEEVE (3-DM) | |||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| H | ORDER BY THE DECIMETER | |||
#M00891290153
550-3624: HARNESS AS-CAB
For full view, you need register
Parts for your MD6310 ROTARY DRILL:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 306-0282 | [1] | BLOCK AS-FUSE | ||
| 306-0350 | [1] | COVER | ||
| 1H-3244 | [1] | LOCKWASHER | ||
| 5C-2890 M | [1] | NUT (M6X1-THD) | ||
| 306-0351 | [1] | SEAL-COVER | ||
| 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 330-3336 | [1] | BLOCK AS-FUSE | ||
| 330-3341 | [1] | COVER-FUSE HOLDER | ||
| 486-7435 | [1] | SEAL-COVER | ||
| 374-7464 | [1] | CAP-SEAL | ||
| 123-7615 | [1] | CONNECTOR (1-PIN) | ||
| 330-3341 | [1] | COVER-FUSE HOLDER | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 159-9496 | [1] | LOCKWASHER | ||
| 1H-3244 | [1] | LOCKWASHER | ||
| 264-3617 | [2] | LOCKWASHER | ||
| 5C-2890 M | [1] | NUT (M6X1-THD) | ||
| 5C-7261 M | [2] | NUT (M8X1.25-THD) | ||
| 203-9007 | [2] | NUT (1-1/2-18-THD) | ||
| 159-9495 | [1] | NUT (1-1/2-18-THD) | ||
| 9X-3401 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [122] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [122] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 202-5397 | [18] | PLUG | ||
| 3E-5519 | [3] | PLUG AS-CONNECTOR (5-PIN) | ||
| 147-1446 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 147-1445 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [5] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [4] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 155-2260 | [6] | KIT-CONNECTING PLUG (3-PIN) | ||
| 174-0503 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGES, & INTERFACE SEAL) | ||||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 483-2761 | [2] | PLUG AS-CONNECTOR (44-PIN) | ||
| 483-2762 | [3] | PLUG AS-CONNECTOR (44-PIN) | ||
| 483-2763 | [2] | PLUG AS-CONNECTOR (44-PIN) | ||
| 490-0571 | [5] | PLUG AS-CONNECTOR (2-PIN) | ||
| 7R-2751 | [95] | PLUG-CONNECTOR (1-PIN) | ||
| 245-7434 | [4] | KIT-CONNECTING PLUG (10-PIN) | ||
| (EACH INCLUDES) | ||||
| 202-5397 | [8] | PLUG | ||
| 288-7146 | [10] | WIRE AS (16-GA) | ||
| 8T-8737 | [297] | PLUG-SEAL | ||
| 483-2768 | [235] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 133-8753 | [1] | RECEPTACLE AS-CONNECTOR (70-PIN) | ||
| 134-2540 | [3] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 224-2735 | [1] | RECEPTACLE AS-CONNECTOR (70-PIN) | ||
| 324-5680 | [1] | RECEPTACLE AS-CONNECTOR (120-PIN) | ||
| 324-5681 | [1] | SEAL | ||
| 451-8019 | [2] | RECEPTACLE AS-CONNECTOR (14-PIN) | ||
| 128-5016 | [55] | SEAL-CABLE | ||
| 7R-2750 | [20] | SEAL-CONNECTOR | ||
| 185-1860 | [20] | SEAL-WIRE | ||
| 185-1861 | [2] | SEAL-WIRE | ||
| 196-2412 | [39] | TERMINAL AS (16-GA) | ||
| (EACH INCLUDES) | ||||
| 7R-2750 | [1] | SEAL-CONNECTOR | ||
| 5P-5623 BD | WIRE-ELECTRICAL (16-GA, BLACK) | |||
| 9X-3402 | [175] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [175] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 196-2413 | [18] | TERMINAL AS (12-GA) | ||
| (EACH INCLUDES) | ||||
| 128-4123 | [1] | SEAL-CABLE | ||
| 5P-5621 BD | WIRE (12-GA) | |||
| 202-0313 | [18] | TERMINAL AS (18-GA) | ||
| (EACH INCLUDES) | ||||
| 128-5016 | [1] | SEAL-CABLE | ||
| 5P-5677 BD | WIRE (18-GA, BLACK) | |||
| 483-2765 | [19] | TERMINAL AS (20-GA) | ||
| (EACH INCLUDES) | ||||
| J | WIRE (20-GA, BLACK)(2-DM) | |||
| 483-2767 | [54] | TERMINAL AS (18-GA) | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 097-7234 | [2] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 9G-9435 | [3] | TERMINAL-RING (18-GA TO 22-GA, 3/8-IN SCREW) | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8079 | [4] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 6V-0491 | [2] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 9X-1056 | [11] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 204-1297 | [20] | TERMINAL AS-BLADE (18-GA TO 20-GA) | ||
| (EACH INCLUDES) | ||||
| 235-4123 | [1] | TERMINAL (18-GA TO 20-GA) | ||
| 223-4779 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 6V-2689 D | TUBE-HEAT SHRINK (6.35-MM DIA)(1.1-M) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(108-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(225-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(95-CM) | |||
| 7X-0608 | [2] | WASHER-HARD (10.2X16X2-MM THK) | ||
| 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 270-2679 | [2] | LOCKWASHER | ||
| 155-2259 | [1] | WEDGE-PLUG LOCK (8-PIN) | ||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| J | ORDER BY THE DECIMETER | |||
| M | METRIC PART | |||
#M00891290154
550-3625: HARNESS AS-CAB
For full view, you need register
Parts for your MD6310 ROTARY DRILL:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6V-0491 | [2] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 6V-2689 D | TUBE-HEAT SHRINK (6.35-MM DIA)(0.8-M) | |||
| 8T-8737 | [178] | PLUG-SEAL | ||
| 9X-3401 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [24] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(63-CM) | |||
| 123-7615 | [1] | CONNECTOR (1-PIN) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(33-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 9X-3402 | [162] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [162] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8069 | [6] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 9X-3401 | [18] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [18] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2256 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [11] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 155-2258 | [3] | WEDGE-PLUG LOCK (12-PIN) | ||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 169-0705 | [39] | SEAL | ||
| 224-2734 | [1] | RECEPTACLE AS-CONNECTOR (70-PIN) | ||
| 261-5510 | [11] | BOOT | ||
| 264-5732 | [1] | PLUG AS-CONNECTOR (120-PIN) | ||
| 288-7324 | [1] | SEAL-CONNECTOR | ||
| 382-3077 | [3] | BOOT (1-PIN) | ||
| 490-0571 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 490-0578 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#M00891290155
555-8335: HARNESS AS-CAB
For full view, you need register
Parts for your MD6310 ROTARY DRILL:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [12] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 483-2763 | [1] | PLUG AS-CONNECTOR (44-PIN) | ||
| 8T-8737 | [70] | PLUG-SEAL | ||
| 483-2768 | [32] | PLUG-SEAL | ||
| 224-2734 | [1] | RECEPTACLE AS-CONNECTOR (70-PIN) | ||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 483-2767 | [12] | TERMINAL AS (18-GA) | ||
| 6V-2689 D | TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM) | |||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#M00891290156
546-4814: HARNESS AS-CHASSIS
546-4814 HARNESS AS-CHASSIS -JUMPER
S/N DLZ1-UP
JACK
PART OF 559-4075 WIRING GP-ALARM
S/N DLZ1-UP
JACK
PART OF 559-4075 WIRING GP-ALARM
For full view, you need register
Parts for your MD6310 ROTARY DRILL:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3377 | [1] | WEDGE-RECEPTACLE LOCK (4-PIN) | ||
| 110-8714 | [4] | END-WIRE (18-GA) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 232-0895 E | CONDUIT-FLEXIBLE (9.6-MM ID)(67-CM) | |||
| 311-8745 | [1] | ADAPTER-CONNECTOR | ||
| 423-7237 | [1] | GASKET | ||
| 464-7352 | [1] | CAP-SEAL | ||
| E | ORDER BY THE CENTIMETER | |||
#M00891290157
536-8660: HARNESS AS-CONTROL
For full view, you need register
#M00891290158
548-4460: HARNESS AS-CONTROL
548-4460 HARNESS AS-CONTROL -COMPRESSOR
S/N DLZ1-UP
PART OF 494-1203 WIRING GP-SENSOR
S/N DLZ1-UP
PART OF 494-1203 WIRING GP-SENSOR
For full view, you need register
Parts for your MD6310 ROTARY DRILL:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6I-4347 | [4] | BOOT (4-PIN) | ||
| 300-4870 | [1] | BOOT (4-PIN) | ||
| 309-5036 | [1] | BOOT (2-PIN) | ||
| 382-3077 | [1] | BOOT (1-PIN) | ||
| 274-3774 | [1] | CAP-CONNECTOR | ||
| 211-0052 | [1] | NUT (1-11/16-18-THD) | ||
| 9X-3401 | [20] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [20] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 455-0709 | [1] | SEAL-CONNECTOR | ||
| 237-0227 | [3] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [20] | PLUG-SEAL | ||
| 167-3692 | [1] | RECEPTACLE AS-CONNECTOR (31-PIN) | ||
| 274-3778 | [1] | CAP-SEAL | ||
| 9X-3402 | [26] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [26] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 310-0674 | [1] | LOCKWASHER | ||
| 155-2259 | [1] | WEDGE-PLUG LOCK (8-PIN) | ||
| E | ORDER BY THE CENTIMETER | |||
#M00891290159
554-3278: HARNESS AS-CONTROL
554-3278 HARNESS AS-CONTROL -TERRAIN
S/N DLZ1-UP
JUMPER
PART OF 541-6746 WIRING GP-CAB
S/N DLZ1-UP
JUMPER
PART OF 541-6746 WIRING GP-CAB
For full view, you need register
Parts for your MD6310 ROTARY DRILL:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6V-2689 D | TUBE-HEAT SHRINK (6.35-MM DIA)(0.3-M) | |||
| 8T-8737 | [71] | PLUG-SEAL | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(8-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 9X-3402 | [25] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [25] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2258 | [2] | WEDGE-PLUG LOCK (12-PIN) | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 329-3734 B | TAPE-ELECTRICAL | |||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
Information:
ELECTRICAL AND STARTING SYSTEM
BATTERY GP
Operation and Maintenance Manual
Tool Operating Manual
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
